ETSI EN 301 406-2 V3.1.1 (2023-08)

Digital Enhanced Cordless Telecommunications (DECT); Harmonised Standard for access to radio spectrum; Part 2: DECT-2020 NR

DEN/DECT-00359-2

Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Harmonizirani standard za dostop do radijskega spektra - 2. del: DECT-2020 NR

General Information

• Status: Not Published
• Technical Committee: DECT - Digital Enhanced Cordless Telecommunications (DECT)
• Current Stage: 12 - Completion
• Due Date: 31-Dec-2023
• Completion Date: 17-Aug-2023
• Ref Project: SIST EN 301 406-2 V3.1.1:2023 - Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard for access to radio spectrum - Part 2: DECT-2020 NR

Standards Content (Sample)

ETSI EN 301 406-2 V3.1.1 (2023-08)






HARMONISED EUROPEAN STANDARD
Digital Enhanced Cordless Telecommunications (DECT);
Harmonised Standard for access to radio spectrum;
Part 2: DECT-2020 NR

---------------------- Page: 1 ----------------------
2 ETSI EN 301 406-2 V3.1.1 (2023-08)

Reference
DEN/DECT-00359-2
Keywords
DECT, DECT-2020, radio, radio parameters,
regulation, testing

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2023.
All rights reserved.

ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 301 406-2 V3.1.1 (2023-08)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Technical requirements specifications . 13
4.1 Environmental profile . 13
4.2 General requirements . 13
4.3 Conformance requirements for transmitter . 14
4.3.1 Transmitter RF Output Power . 14
4.3.1.1 Definition . 14
4.3.1.2 Limit . 14
4.3.1.3 Conformance . 14
4.3.2 Nominal Centre Frequencies. 14
4.3.2.1 General . 14
4.3.2.2 Definitions . 14
4.3.2.3 Limit . 15
4.3.2.4 Conformance . 15
4.3.3 Nominal Channel Bandwidth . 15
4.3.3.1 Definitions . 15
4.3.3.2 Limit . 15
4.3.3.3 Conformance . 16
4.3.4 Transmitter unwanted emissions . 16
4.3.4.1 Transmitter unwanted emissions in the spurious domain . 16
4.3.4.1.1 Definition. 16
4.3.4.1.2 Limits . 16
4.3.4.1.3 Conformance . 16
4.3.4.2 Transmitter unwanted emissions in the out of band domain . 16
4.3.4.2.1 Definition. 16
4.3.4.2.2 Limits . 17
4.3.4.2.3 Conformance . 17
4.4 Conformance requirements for receiver . 17
4.4.1 Receiver Minimum Performance Criterion . 17
4.4.2 Receiver Sensitivity . 18
4.4.2.1 Definition . 18
4.4.2.2 Limit . 18
4.4.2.3 Conformance . 18
4.4.3 Adjacent Channel Selectivity . 18
4.4.3.1 Definition . 18
4.4.3.2 Limit . 18
4.4.3.3 Conformance . 19
4.4.4 Receiver out of band blocking . 19
4.4.4.1 Definition . 19
4.4.4.2 Limit . 20
4.4.4.3 Conformance . 20
4.4.5 Spurious response . 20
4.4.5.1 Definition . 20
4.4.5.2 Limit . 20
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 301 406-2 V3.1.1 (2023-08)
4.4.5.3 Conformance . 21
4.4.6 Receiver Intermodulation . 21
4.4.6.1 Definition . 21
4.4.6.2 Limit . 21
4.4.6.3 Conformance . 21
4.4.7 Receiver unwanted emissions in the spurious domain . 21
4.4.7.1 Definition . 21
4.4.7.2 Limit . 21
4.4.7.3 Conformance . 22
4.5 Conformance requirements on Channel Access . 22
4.5.1 General . 22
4.5.1.1 Requirements . 22
4.5.1.2 Conformance . 22
4.5.2 Channel Access of a Radio Device in FT mode . 22
4.5.2.1 Definition . 22
4.5.2.2 Requirements . 23
4.5.2.3 Conformance . 23
4.5.3 Channel Access of a Radio Device in PT mode and Random Access . 23
4.5.3.1 Definition . 23
4.5.3.2 Requirements . 23
4.5.3.3 Conformance . 23
4.5.4 Channel Access of Radio Device in FT mode for Scheduled Access . 23
4.5.4.1 Definition . 23
4.5.4.2 Requirements . 24
4.5.4.3 Conformance . 24
4.5.5 Channel Access of Radio Device in PT mode for Scheduled Access . 24
4.5.5.1 Definition . 24
4.5.5.2 Requirements . 24
4.5.5.3 Conformance . 24
4.5.6 Maximum Transmission Time of a Radio Device . 25
4.5.6.1 Definition . 25
4.5.6.2 Requirements . 25
4.5.6.3 Conformance . 25
5 Testing for compliance with technical requirements . 25
5.1 Environmental conditions for testing . 25
5.1.1 General . 25
5.1.2 Normal test conditions . 25
5.1.2.1 Normal temperature and humidity . 25
5.1.2.2 Normal power source . 25
5.1.3 Extreme test conditions . 26
5.2 Interpretation of the measurement results . 26
5.3 Definition of other test conditions . 26
5.3.1 Product information for testing . 26
5.3.2 Test signals . 27
5.3.2.1 Overview . 27
5.3.2.2 Interfering signal for receiver performance tests . 28
5.3.2.3 AWGN Interference signal used for Channel Access Tests . 28
5.3.3 Test operational modes . 29
5.3.3.1 Device under representative test signal . 29
5.3.4 Antennas . 29
5.3.4.1 Integrated and dedicated antennas . 29
5.3.5 Tests of the receiver performance criterion . 30
5.3.5.1 General . 30
5.3.5.2 Receiver statistical testing . 30
5.3.5.3 Receiver no loss of the wireless transmission function testing . 30
5.3.6 Presentation of equipment . 30
5.3.7 Conducted measurements, radiated measurements, relative measurements . 30
5.4 Method of measurement for transmitters . 30
5.4.1 Transmitter RF Output Power . 30
5.4.1.1 Test conditions . 30
5.4.1.2 Test method . 31
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 301 406-2 V3.1.1 (2023-08)
5.4.1.2.1 Conducted measurement. 31
5.4.1.2.2 Radiated measurement . 32
5.4.2 Nominal Centre Frequencies. 33
5.4.2.1 Test Conditions . 33
5.4.2.2 Test Method . 33
5.4.2.2.1 Conducted measurement. 33
5.4.2.2.2 Radiated measurement . 34
5.4.3 Transmitter unwanted emissions . 34
5.4.3.1 Transmitter unwanted emissions in the spurious domain . 34
5.4.3.1.1 Test Conditions . 34
5.4.3.1.2 Test Method . 34
5.4.3.2 Transmitter unwanted emissions in the out of band domain . 36
5.4.3.2.1 Test Conditions . 36
5.4.3.2.2 Test Method . 37
5.5 Method of measurement for receiver. 38
5.5.1 Receiver Sensitivity . 38
5.5.1.1 Test Conditions . 38
5.5.1.2 Test Method . 38
5.5.1.2.1 Conducted measurement. 38
5.5.1.2.2 Radiated measurement . 39
5.5.2 Adjacent Channel Selectivity . 39
5.5.2.1 Test Conditions . 39
5.5.2.2 Test Method . 40
5.5.2.2.1 Conducted measurement. 40
5.5.2.2.2 Radiated measurement . 41
5.5.3 Receiver out of band blocking . 41
5.5.3.1 Test Conditions . 41
5.5.3.2 Test Method . 41
5.5.3.2.1 Conducted measurement. 41
5.5.3.2.2 Radiated measurement . 42
5.5.4 Receiver spurious response . 43
5.5.4.1 Test Conditions . 43
5.5.4.2 Test Method . 43
5.5.4.2.1 Conducted measurement. 43
5.5.4.2.2 Radiated measurement . 44
5.5.5 Receiver Intermodulation . 44
5.5.5.1 Test Conditions . 44
5.5.5.2 Test Method . 44
5.5.5.2.1 Conducted measurement. 44
5.5.5.2.2 Radiated measurement . 46
5.5.6 Receiver unwanted emissions in the spurious domain . 46
5.5.6.1 Purpose . 46
5.5.6.2 Test Conditions . 46
5.5.6.3 Test Method . 46
5.5.6.3.1 Conducted measurement. 46
5.5.6.3.2 Radiated measurement . 48
5.6 Test methods for Channel Access . 48
5.6.1 Generic Test procedure for measuring channel or frequency use . 48
5.6.1.1 Purpose . 48
5.6.1.2 Test Conditions . 48
5.6.1.3 Test Method . 49
5.6.1.3.1 Conducted measurement.
...

Draft ETSI EN 301 406-2 V3.0.1 (2023-04)






HARMONISED EUROPEAN STANDARD
Digital Enhanced Cordless Telecommunications (DECT);
Harmonised Standard for access to radio spectrum;
Part 2: DECT-2020 NR

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 406-2 V3.0.1 (2023-04)

Reference
DEN/DECT-00359-2
Keywords
DECT, DECT-2020, radio, radio parameters,
regulation, testing

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2023.
All rights reserved.

ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 406-2 V3.0.1 (2023-04)
Contents
7Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Technical requirements specifications . 13
4.1 Environmental profile . 13
4.2 General requirements . 13
4.3 Conformance requirements for transmitter . 14
4.3.1 Transmitter RF Output Power . 14
4.3.1.1 Definition . 14
4.3.1.2 Limit . 14
4.3.1.3 Conformance . 14
4.3.2 Nominal Centre Frequencies. 14
4.3.2.1 General . 14
4.3.2.2 Definitions . 14
4.3.2.3 Limit . 15
4.3.2.4 Conformance . 15
4.3.3 Nominal Channel Bandwidth . 15
4.3.3.1 Definitions . 15
4.3.3.2 Limit . 15
4.3.3.3 Conformance . 16
4.3.4 Transmitter unwanted emissions . 16
4.3.4.1 Transmitter unwanted emissions in the spurious domain . 16
4.3.4.1.1 Definition. 16
4.3.4.1.2 Limits . 16
4.3.4.1.3 Conformance . 16
4.3.4.2 Transmitter unwanted emissions in the out of band domain . 16
4.3.4.2.1 Definition. 16
4.3.4.2.2 Limits . 17
4.3.4.2.3 Conformance . 17
4.4 Conformance requirements for receiver . 17
4.4.1 Receiver Minimum Performance Criterion . 17
4.4.2 Receiver Sensitivity . 18
4.4.2.1 Definition . 18
4.4.2.2 Limit . 18
4.4.2.3 Conformance . 18
4.4.3 Adjacent Channel Selectivity . 18
4.4.3.1 Definition . 18
4.4.3.2 Limit . 18
4.4.3.3 Conformance . 19
4.4.4 Receiver out of band blocking . 19
4.4.4.1 Definition . 19
4.4.4.2 Limit . 20
4.4.4.3 Conformance . 20
4.4.5 Spurious response . 20
4.4.5.1 Definition . 20
4.4.5.2 Limit . 20
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 406-2 V3.0.1 (2023-04)
4.4.5.3 Conformance . 21
4.4.6 Receiver Intermodulation . 21
4.4.6.1 Definition . 21
4.4.6.2 Limit . 21
4.4.6.3 Conformance . 21
4.4.7 Receiver unwanted emissions in the spurious domain . 21
4.4.7.1 Definition . 21
4.4.7.2 Limit . 21
4.4.7.3 Conformance . 22
4.5 Conformance requirements on Channel Access . 22
4.5.1 General . 22
4.5.1.1 Requirements . 22
4.5.1.2 Conformance . 22
4.5.2 Channel Access of a Radio Device in FT mode . 22
4.5.2.1 Definition . 22
4.5.2.2 Requirements . 23
4.5.2.3 Conformance . 23
4.5.3 Channel Access of a Radio Device in PT mode and Random Access . 23
4.5.3.1 Definition . 23
4.5.3.2 Requirements . 23
4.5.3.3 Conformance . 23
4.5.4 Channel Access of Radio Device in FT mode for Scheduled Access . 23
4.5.4.1 Definition . 23
4.5.4.2 Requirements . 24
4.5.4.3 Conformance . 24
4.5.5 Channel Access of Radio Device in PT mode for Scheduled Access . 24
4.5.5.1 Definition . 24
4.5.5.2 Requirements . 24
4.5.5.3 Conformance . 24
4.5.6 Maximum Transmission Time of a Radio Device . 25
4.5.6.1 Definition . 25
4.5.6.2 Requirements . 25
4.5.6.3 Conformance . 25
5 Testing for compliance with technical requirements . 25
5.1 Environmental conditions for testing . 25
5.1.1 General . 25
5.1.2 Normal test conditions . 25
5.1.2.1 Normal temperature and humidity . 25
5.1.2.2 Normal power source . 25
5.1.3 Extreme test conditions . 26
5.2 Interpretation of the measurement results . 26
5.3 Definition of other test conditions . 26
5.3.1 Product information for testing . 26
5.3.2 Test signals . 27
5.3.2.1 Overview . 27
5.3.2.2 Interfering signal for receiver performance tests . 28
5.3.2.3 AWGN Interference signal used for Channel Access Tests . 28
5.3.3 Test operational modes . 29
5.3.3.1 Device under representative test signal . 29
5.3.4 Antennas . 29
5.3.4.1 Integrated and dedicated antennas . 29
5.3.5 Tests of the receiver performance criterion . 30
5.3.5.1 General . 30
5.3.5.2 Receiver statistical testing . 30
5.3.5.3 Receiver no loss of the wireless transmission function testing . 30
5.3.6 Presentation of equipment . 30
5.3.7 Conducted measurements, radiated measurements, relative measurements . 30
5.4 Method of measurement for transmitters . 30
5.4.1 Transmitter RF Output Power . 30
5.4.1.1 Test conditions . 30
5.4.1.2 Test method . 31
ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 406-2 V3.0.1 (2023-04)
5.4.1.2.1 Conducted measurement. 31
5.4.1.2.2 Radiated measurement . 32
5.4.2 Nominal Centre Frequencies. 33
5.4.2.1 Test Conditions . 33
5.4.2.2 Test Method . 33
5.4.2.2.1 Conducted measurement. 33
5.4.2.2.2 Radiated measurement . 34
5.4.3 Transmitter unwanted emissions . 34
5.4.3.1 Transmitter unwanted emissions in the spurious domain . 34
5.4.3.1.1 Test Conditions . 34
5.4.3.1.2 Test Method . 34
5.4.3.2 Transmitter unwanted emissions in the out of band domain . 36
5.4.3.2.1 Test Conditions . 36
5.4.3.2.2 Test Method . 37
5.5 Method of measurement for receiver. 38
5.5.1 Receiver Sensitivity . 38
5.5.1.1 Test Conditions . 38
5.5.1.2 Test Method . 38
5.5.1.2.1 Conducted measurement. 38
5.5.1.2.2 Radiated measurement . 39
5.5.2 Adjacent Channel Selectivity . 39
5.5.2.1 Test Conditions . 39
5.5.2.2 Test Method . 40
5.5.2.2.1 Conducted measurement. 40
5.5.2.2.2 Radiated measurement . 41
5.5.3 Receiver out of band blocking . 41
5.5.3.1 Test Conditions . 41
5.5.3.2 Test Method . 41
5.5.3.2.1 Conducted measurement. 41
5.5.3.2.2 Radiated measurement . 42
5.5.4 Receiver spurious response . 43
5.5.4.1 Test Conditions . 43
5.5.4.2 Test Method . 43
5.5.4.2.1 Conducted measurement. 43
5.5.4.2.2 Radiated measurement . 44
5.5.5 Receiver Intermodulation . 44
5.5.5.1 Test Conditions . 44
5.5.5.2 Test Method . 44
5.5.5.2.1 Conducted measurement. 44
5.5.5.2.2 Radiated measurement . 46
5.5.6 Receiver unwanted emissions in the spurious domain . 46
5.5.6.1 Purpose . 46
5.5.6.2 Test Conditions . 46
5.5.6.3 Test Method . 46
5.5.6.3.1 Conducted measurement. 46
5.5.6.3.2 Radiated measurement . 48
5.6 Test methods for Channel Access . 48
5.6.1 Generic Test procedure for measuring channel or frequency use . 48
5.6.1.1 Purpose . 48
5.6.1.2 Test Conditions . 48
5.6.1.3 Test Method . 49
5.6.1.3.1 Conducted measurement.
...

SLOVENSKI STANDARD
oSIST prEN 301 406-2 V3.0.1:2023
01-julij-2023
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Harmonizirani standard
za dostop do radijskega spektra - 2. del: DECT-2020 NR
Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard for
access to radio spectrum - Part 2: DECT-2020 NR
Ta slovenski standard je istoveten z: ETSI EN 301 406-2 V3.0.1 (2023-04)
ICS:
33.070.30 Digitalne izboljšane Digital Enhanced Cordless
brezvrvične telekomunikacije Telecommunications (DECT)
(DECT)
oSIST prEN 301 406-2 V3.0.1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 301 406-2 V3.0.1:2023

---------------------- Page: 2 ----------------------
oSIST prEN 301 406-2 V3.0.1:2023
Draft ETSI EN 301 406-2 V3.0.1 (2023-04)






HARMONISED EUROPEAN STANDARD
Digital Enhanced Cordless Telecommunications (DECT);
Harmonised Standard for access to radio spectrum;
Part 2: DECT-2020 NR

---------------------- Page: 3 ----------------------
oSIST prEN 301 406-2 V3.0.1:2023

2 Draft ETSI EN 301 406-2 V3.0.1 (2023-04)

Reference
DEN/DECT-00359-2
Keywords
DECT, DECT-2020, radio, radio parameters,
regulation, testing

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2023.
All rights reserved.

ETSI

---------------------- Page: 4 ----------------------
oSIST prEN 301 406-2 V3.0.1:2023

3 Draft ETSI EN 301 406-2 V3.0.1 (2023-04)
Contents
7Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Technical requirements specifications . 13
4.1 Environmental profile . 13
4.2 General requirements . 13
4.3 Conformance requirements for transmitter . 14
4.3.1 Transmitter RF Output Power . 14
4.3.1.1 Definition . 14
4.3.1.2 Limit . 14
4.3.1.3 Conformance . 14
4.3.2 Nominal Centre Frequencies. 14
4.3.2.1 General . 14
4.3.2.2 Definitions . 14
4.3.2.3 Limit . 15
4.3.2.4 Conformance . 15
4.3.3 Nominal Channel Bandwidth . 15
4.3.3.1 Definitions . 15
4.3.3.2 Limit . 15
4.3.3.3 Conformance . 16
4.3.4 Transmitter unwanted emissions . 16
4.3.4.1 Transmitter unwanted emissions in the spurious domain . 16
4.3.4.1.1 Definition. 16
4.3.4.1.2 Limits . 16
4.3.4.1.3 Conformance . 16
4.3.4.2 Transmitter unwanted emissions in the out of band domain . 16
4.3.4.2.1 Definition. 16
4.3.4.2.2 Limits . 17
4.3.4.2.3 Conformance . 17
4.4 Conformance requirements for receiver . 17
4.4.1 Receiver Minimum Performance Criterion . 17
4.4.2 Receiver Sensitivity . 18
4.4.2.1 Definition . 18
4.4.2.2 Limit . 18
4.4.2.3 Conformance . 18
4.4.3 Adjacent Channel Selectivity . 18
4.4.3.1 Definition . 18
4.4.3.2 Limit . 18
4.4.3.3 Conformance . 19
4.4.4 Receiver out of band blocking . 19
4.4.4.1 Definition . 19
4.4.4.2 Limit . 20
4.4.4.3 Conformance . 20
4.4.5 Spurious response . 20
4.4.5.1 Definition . 20
4.4.5.2 Limit . 20
ETSI

---------------------- Page: 5 ----------------------
oSIST prEN 301 406-2 V3.0.1:2023

4 Draft ETSI EN 301 406-2 V3.0.1 (2023-04)
4.4.5.3 Conformance . 21
4.4.6 Receiver Intermodulation . 21
4.4.6.1 Definition . 21
4.4.6.2 Limit . 21
4.4.6.3 Conformance . 21
4.4.7 Receiver unwanted emissions in the spurious domain . 21
4.4.7.1 Definition . 21
4.4.7.2 Limit . 21
4.4.7.3 Conformance . 22
4.5 Conformance requirements on Channel Access . 22
4.5.1 General . 22
4.5.1.1 Requirements . 22
4.5.1.2 Conformance . 22
4.5.2 Channel Access of a Radio Device in FT mode . 22
4.5.2.1 Definition . 22
4.5.2.2 Requirements . 23
4.5.2.3 Conformance . 23
4.5.3 Channel Access of a Radio Device in PT mode and Random Access . 23
4.5.3.1 Definition . 23
4.5.3.2 Requirements . 23
4.5.3.3 Conformance . 23
4.5.4 Channel Access of Radio Device in FT mode for Scheduled Access . 23
4.5.4.1 Definition . 23
4.5.4.2 Requirements . 24
4.5.4.3 Conformance . 24
4.5.5 Channel Access of Radio Device in PT mode for Scheduled Access . 24
4.5.5.1 Definition . 24
4.5.5.2 Requirements . 24
4.5.5.3 Conformance . 24
4.5.6 Maximum Transmission Time of a Radio Device . 25
4.5.6.1 Definition . 25
4.5.6.2 Requirements . 25
4.5.6.3 Conformance . 25
5 Testing for compliance with technical requirements . 25
5.1 Environmental conditions for testing . 25
5.1.1 General . 25
5.1.2 Normal test conditions . 25
5.1.2.1 Normal temperature and humidity . 25
5.1.2.2 Normal power source . 25
5.1.3 Extreme test conditions . 26
5.2 Interpretation of the measurement results . 26
5.3 Definition of other test conditions . 26
5.3.1 Product information for testing . 26
5.3.2 Test signals . 27
5.3.2.1 Overview . 27
5.3.2.2 Interfering signal for receiver performance tests . 28
5.3.2.3 AWGN Interference signal used for Channel Access Tests . 28
5.3.3 Test operational modes . 29
5.3.3.1 Device under representative test signal . 29
5.3.4 Antennas . 29
5.3.4.1 Integrated and dedicated antennas . 29
5.3.5 Tests of the receiver performance criterion . 30
5.3.5.1 General . 30
5.3.5.2 Receiver statistical testing . 30
5.3.5.3 Receiver no loss of the wireless transmission function testing . 30
5.3.6 Presentation of equipment . 30
5.3.7 Conducted measurements, radiated measurements, relative measurements . 30
5.4 Method of measurement for transmitters . 30
5.4.1 Transmitter RF Output Power . 30
5.4.1.1 Test conditions . 30
5.4.1.2 Test method . 31
ETSI

---------------------- Page: 6 ----------------------
oSIST prEN 301 406-2 V3.0.1:2023

5 Draft ETSI EN 301 406-2 V3.0.1 (2023-04)
5.4.1.2.1 Conducted measurement. 31
5.4.1.2.2 Radiated measurement . 32
5.4.2 Nominal Centre Frequencies. 33
5.4.2.1 Test Conditions . 33
5.4.2.2 Test Method . 33
5.4.2.2.1 Conducted measurement. 33
5.4.2.2.2 Radiated measurement . 34
5.4.3 Transmitter unwanted emissions . 34
5.4.3.1 Transmitter unwanted emissions in the spurious domain . 34
5.4.3.1.1 Test Conditions . 34
5.4.3.1.2 Test Method . 34
5.4.3.2 Transmitter unwanted emissions in the out of band domain . 36
5.4.3.2.1 Test Conditions . 36
5.4.3.2.2 Test Method . 37
5.5 Method of measurement for receiver. 38
5.5.1 Receiver Sensitivity . 38
5.5.1.1 Test Conditions . 38
5.5.1.2 Test Method . 38
5.5.1.2.1 Conducted measurement. 38
5.5.1.2.2 Radiated measurement . 39
5.5.2 Adjacent Channel Selectivity . 39
5.5.2.1 Test Conditions . 39
5.5.2.2 Test Method . 40
5.5.2.2.1 Conducted measurement. 40
5.5.2.2.2 Radiated measurement . 41
5.5.3 Receiver out of band blocking . 41
5.5.3.1 Test Conditions . 41
5.5.3.2 Test Method . 41
5.5.3.2.1 Conducted measurement. 41
5.5.3.2.2 Radiated measurement . 42
5.5.4 Receiver spurious response . 43
5.5.4.1 Test Conditions . 43
5.5.4.2 Test Method . 43
5.5.4.2.1 Conducted measurement. 43
5.5.4.2.2 Radiated measurement . 44
5.5.5 Receiver Intermodulation . 44
5.5.5.1 Test Conditions . 44
5.5.5.2 Test Method . 44
5.5.5.2.1 Conducted measurement. 44
5.5.5.2.2 Radiated measurement . 46
5.5.6 Receiver unwanted emissions in the spurious domain . 46
5.5.6.1 Purpose . 46
5.5.6.2 Test Conditions . 46
5.5.6.3 Test Method . 46
5.5.6.3.1 Conducted measurement.
...