ETSI TS 103 412 V1.3.1 (2020-03)

Mobile Standards Group (MSG); Pan-European eCall end to end and in-band modem conformance testing; Prose test specification

RTS/MSG-001127

General Information

• Status: Published
• Publication Date: 08-Mar-2020
• Technical Committee: MSG - Mobile Standards Group
• Current Stage: 12 - Completion
• Due Date: 28-Feb-2020
• Completion Date: 09-Mar-2020

Standards Content (Sample)

ETSI TS 103 412 V1.3.1 (2020-03)






TECHNICAL SPECIFICATION
Mobile Standards Group (MSG);
Pan-European eCall end to end and
in-band modem conformance testing;
Prose test specification

---------------------- Page: 1 ----------------------
2 ETSI TS 103 412 V1.3.1 (2020-03)



Reference
RTS/MSG-001127
Keywords
eCall, GSM, UMTS

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 103 412 V1.3.1 (2020-03)
Contents
Intellectual Property Rights . 9
Foreword . 9
Modal verbs terminology . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 12
3.1 Terms . 12
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Glossary . 13
4.1 Intention of the glossary . 13
4.2 General . 14
4.3 States . 14
4.4 Decisions . 15
4.5 Procedures . 15
4.6 Tester input/output, internal tester actions/trigger . 15
5 Overview . 17
5.1 Test definition methodology. 17
5.1.1 Derivation of Test Case Descriptions from CEN EN 16454 . 17
5.1.2 Structure of Test Case Descriptions . 17
5.1.3 Test Purposes . 17
5.1.4 Pre-Test Conditions . 17
5.1.5 Test Sequence . 17
5.1.6 Final conditions . 17
5.2 Abstract Test Architecture . 18
5.2.0 Preface . 18
5.2.1 Overview . 18
5.2.1.1 IVS Testing . 18
5.2.1.1.1 Test Model IVS . 18
5.2.1.1.2 Interface descriptions . 18
5.2.1.2 PSAP Testing . 19
5.2.2 Interface Specifications . 19
5.2.2.1 IVS Testing . 19
5.2.2.1.0 Preface . 19
5.2.2.1.1 IVS and Upper Tester . 20
5.2.2.1.2 IVS and MNO . 20
5.2.2.1.3 IVS and GNSS Simulator . 21
5.2.2.2 MNO Testing . 21
5.2.2.3 PSAP Testing . 21
5.2.2.4 TPS-eCall Testing . 21
5.2.3 State diagram . 21
5.3 Specification in TTCN . 24
5.4 Capabilities . 24
5.5 Test Case Selection . 25
5.6 Test Configuration Parameters . 25
5.6.1 eCall Type Suffix . 25
5.7 TTCN Implementation . 25
5.8 Execution Guidelines . 25
6 Generic Procedures. 26
6.0 Preface . 26
6.1 General . 26
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 103 412 V1.3.1 (2020-03)
6.1.1 General assumptions . 26
6.1.2 Generic procedures . 26
6.1.2.0 Preface . 26
6.1.2.1 Procedure for network registration . 27
6.1.2.2 Procedure for eCall establishment . 27
6.1.2.3 Procedure for eCall in progress . 30
6.1.2.4 Procedure for eCall release (PSAP initiated) . 30
6.1.2.5 Procedure for eCall release (IVS initiated, preceding AL-ACK call clear down). 30
6.1.2.6 Procedure for PSAP callback . 30
6.1.2.7 Procedure for call rejection . 31
6.2 Preambles . 32
6.3 Postambles . 36
6.3.0 Preface . 36
6.3.1 Postambles for eCall capable devices . 36
6.3.2 Postambles for eCall only devices . 36
6.3.3 Special case: Limited Service Condition . 37
7 Test Cases . 37
7.1 In-vehicle equipment and system (IVS) . 37
7.1.1 Conformance tests for in-vehicle user equipment for Pan European eCall . 37
7.1.1.1 CTP 1.1.0.1 Conformance to ETSI TS 102 936-1 and ETSI TS 102 936-2 - PE eCall IVS . 37
7.1.1.2a CTP 1.1.0.2 Test for conformance to valid SIM/USIM - PE eCall capable IVS . 37
7.1.1.2a.1 Test Purpose (TP) . 37
7.1.1.2a.2 Test applicability . 37
7.1.1.2a.3 Conformance requirements . 37
7.1.1.2a.4 Test description . 37
7.1.1.2b CTP 1.1.0.2 Test for conformance to valid SIM/USIM - PE eCall only IVS . 38
7.1.1.2b.1 Test Purpose (TP) . 38
7.1.1.2b.2 Test applicability . 38
7.1.1.2b.3 Conformance requirements . 38
7.1.1.2b.4 Test description . 38
7.1.1.3 CTP 1.1.0.3 Automatic eCall triggering does not occur when ignition OFF - PE eCall IVS. 39
7.1.1.3.1 Test Purpose (TP) . 39
7.1.1.3.2 Test applicability . 39
7.1.1.3.3 Conformance requirements . 39
7.1.1.3.4 Test description . 39
7.1.1.4 CTP 1.1.1.1 Power on and self test - PE eCall IVS . 40
7.1.1.4.1 Test Purpose (TP) . 40
7.1.1.4.2 Test applicability . 40
7.1.1.4.3 Conformance requirements . 40
7.1.1.4.4 Test description . 40
7.1.1.5 CTP 1.1.2.1 eCall automatically activated - PE eCall IVS . 40
7.1.1.5.1 Test Purpose (TP) . 40
7.1.1.5.2 Test applicability . 41
7.1.1.5.3 Conformance requirements . 41
7.1.1.5.4 Test description . 41
7.1.1.6 CTP 1.1.2.2 Automatically triggered eCall in progress was not disconnected upon a new eCall
trigger - PE eCall IVS . 41
7.1.1.6.1 Test Purpose (TP) . 41
7.1.1.6.2 Test applicability . 41
7.1.1.6.3 Conformance requirements . 42
7.1.1.6.4 Test description . 42
7.1.1.7 CTP 1.1.2.3 Post-side-crash performance of automatic trigger - IVS . 42
7.1.1.7.1 Test Purpose (TP) . 42
7.1.1.7.2 Test applicability . 42
7.1.1.7.3 Conformance requirements . 42
7.1.1.7.4 Test description . 43
7.1.1.8 CTP 1.1.2.4 Post-frontal-crash performance of automatic trigger - IVS . 43
7.1.1.9 CTP 1.1.2.5 Performance of automatic trigger - different crash types - IVS . 43
7.1.1.9.1 Test Purpose (TP) . 43
7.1.1.9.2 Test applicability . 43
7.1.1.9.3 Conformance requirements . 44
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 103 412 V1.3.1 (2020-03)
7.1.1.9.4 Test description . 44
7.1.1.10 CTP 1.1.3.1 eCall manually activated - PE eCall IVS . 44
7.1.1.10.1 Test Purpose (TP) . 44
7.1.1.10.2 Test applicability . 44
7.1.1.10.3 Conformance requirements . 44
7.1.1.10.4 Test description . 44
7.1.1.11 CTP 1.1.3.2 Manually triggered eCall in progress was not disconnected upon a new eCall trigger
- PE eCall IVS . 45
7.1.1.11.1 Test Purpose (TP) . 45
7.1.1.11.2 Test applicability . 45
7.1.1.11.3 Conformance requirements . 45
7.1.1.11.4 Test description . 45
7.1.1.12 CTP 1.1.4.1 Test eCall activated - PE eCall IVS . 46
7.1.1.12.1 Test Purpose (TP) . 46
7.1.1.12.2 Test applicability . 46
7.1.1.12.3 Conformance requirements . 46
7.1.1.12.4 Test description . 46
7.1.1.13 CTP 1.1.5.1 Network registration - PE eCall IVS . 47
7.1.1.13.1 Test Purpose (TP) . 47
7.1.1.13.2 Test applicability . 47
7.1.1.13.3 Conformance requirements . 47
7.1.1.13.4 Test description . 47
7.1.1.14 CTP 1.1.5.2 Manual termination of eCall by vehicle occupants not allowed (automatically
triggered eCall) - PE eCall IVS . 48
7.1.1.14.1 Test Purpose (TP) . 48
7.1.1.14.2 Test applicability . 48
7.1.1.14.3 Conformance requirements . 48
7.1.1.14.4 Test description . 48
7.1.1.15 CTP 1.1.5.3 Manual termination of eCall by vehicle occupants not allowed (manually triggered
eCall) - PE eCall IVS . 49
7.1.1.15.1 Test Purpose (TP) . 49
7.1.1.15.2 Test applicability . 49
7.1.1.15.3 Conformance requirements . 49
7.1.1.15.4 Test description . 49
7.1.1.16 CTP 1.1.5.4 Automatically triggered eCall in progress was not disconnected when ignition is
switched to OFF - PE eCall IVS . 49
7.1.1.16.1 Test Purpose (TP) . 49
7.1.1.16.2 Test applicability . 50
7.1.1.16.3 Conformance requirements . 50
7.1.1.16.4 Test description . 50
7.1.1.17 CTP 1.1.5.5 Manually triggered eCall in progress was not disconnected when ignition is
switched to OFF - PE eCall IVS . 50
7.1.1.17.1 Test Purpose (TP) . 50
7.1.1.17.2 Test applicability . 50
7.1.1.17.3 Conformance requirements . 50
7.1.1.17.4 Test description . 50
7.1.1.18 Void. 51
7.1.1.18a CTP 1.1.5.6 Priority over conflicting communication - PE eCall capable IVS . 51
7.1.1.18a.1 Test Purpose (TP) . 51
7.1.1.18a.2 Test applicability . 52
7.1.1.18a.3 Conformance requirements . 52
7.1.1.18a.4 Test description . 52
7.1.1.18b CTP 1.1.5.6 Priority over conflicting communication - PE eCall only IVS. 52
7.1.1.19 CTP 1.1.5.7 Network registration is re-tried when network registration attempt was not
successful - PE eCall IVS . 53
7.1.1.20a CTP 1.1.6.1 Mute IVS and vehicle audio - PE eCall capable IVS . 53
7.1.1.20a.1 Test Purpose (TP) . 53
7.1.1.20a.2 Test applicability . 53
7.1.1.20a.3 Conformance requirements . 54
7.1.1.20a.4 Test description . 54
7.1.1.20b CTP 1.1.6.1 Mute IVS and vehicle audio - PE eCall only IVS . 54
7.1.1.20b.1 Test Purpose (TP) . 54
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 103 412 V1.3.1 (2020-03)
7.1.1.20b.2 Test applicability .
...