Business TeleCommunications (BTC); Open Network Provision (ONP) technical requirements; 2 048 kbit/s digital unstructured leased line (D2048U); Attachment requirements for terminal equipment interface

RTBR/BTC-02065

Poslovne telekomunikacije (BTC) - Tehnične zahteve za zagotavljanje odprtosti omrežij - Digitalni zakupljeni vodi za prenosno hitrost 2 048 kbit/s in za nestrukturirane signale (D2048U) - Priključitvene zahteve za vmesnik terminalske opreme

General Information

Status
Published
Publication Date
24-Jan-1996
Current Stage
12 - Completion
Due Date
05-Feb-1996
Completion Date
25-Jan-1996
Mandate

Buy Standard

Standardization document
TBR 012 E1:2004/A1:2004
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST TBR 012 E1:2004/A1:2004
01-oktober-2004
3RVORYQHWHOHNRPXQLNDFLMH %7& 7HKQLþQH]DKWHYH]D]DJRWDYOMDQMHRGSUWRVWL
RPUHåLM'LJLWDOQL]DNXSOMHQLYRGL]DSUHQRVQRKLWURVWNELWVLQ]D
QHVWUXNWXULUDQHVLJQDOH '8 3ULNOMXþLWYHQH]DKWHYH]DYPHVQLNWHUPLQDOVNH
RSUHPH
Business TeleCommunications (BTC); Open Network Provision (ONP) technical
requirements; 2 048 kbit/s digital unstructured leased line (D2048U); Attachment
requirements for terminal equipment interface
Ta slovenski standard je istoveten z: TBR 012/A1 Edition 1
ICS:
33.040.50 Vodi, zveze in tokokrogi Lines, connections and
circuits
SIST TBR 012 E1:2004/A1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST TBR 012 E1:2004/A1:2004

---------------------- Page: 2 ----------------------

SIST TBR 012 E1:2004/A1:2004
TBR 12
AMENDMENT A1
January 1996
Source: ETSI TC-BTC Reference: RTBR/BTC-02065
ICS: 33.120
ONP, leased lines, D2048U
Key words:
This amendment A1 modifies
the Technical Basis for Regulation TBR 12 (1993)
Business TeleCommunications (BTC);
Open Network Provision (ONP) technical requirements;
2 048 kbit/s digital unstructured leased line (D2048U);
Attachment requirements for terminal equipment interface
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
*
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.

---------------------- Page: 3 ----------------------

SIST TBR 012 E1:2004/A1:2004
Page 2
TBR 012: December 1993/A1: January 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST TBR 012 E1:2004/A1:2004
Page 3
TBR 012: December 1993/A1: January 1996
Foreword
This amendment to TBR 12 (1993) has been produced by the Business TeleCommunications (BTC)
Technical Committee of the European Telecommunications Standards Institute (ETSI).
This amendment changes TBR 12 (1993) as described below:
The connector type specified, conforming to ISO/IEC 10173 (1991), cannot be manufactured. Since a
standardized connector is not available, the terminal equipment is required to provide either a point for
connection of solid conductors, or solid conductors themselves. In order to allow connection to be made
using other methods, the TE is permitted to be supplied with other connection schemes (e.g. connectors).

---------------------- Page: 5 ----------------------

SIST TBR 012 E1:2004/A1:2004
Page 4
TBR 012: December 1993/A1: January 1996
Amendments
Page 7, amendment to clause 2
Delete reference [3].
Page 8, amendment to subclause 5.1
Replace subclause 5.1 with subclauses 5.1, 5.1.1 and 5.1.2 as given below:
"5.1 Physical characteristics
Justification: Without a connection method defined, it is impossible for the terminal equipment to connect
to the network, therefore this is required for the terminal equipment to interwork with the network
(article 4f).
Currently no standardized connector is readily available. Consequently, the only method of connection that
can be specified in this TBR is the use of solid conductors of 0,4 to 0,6 mm. This TBR requires the TE to
be cap
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.