ETSI EN 300 347-2 V2.1.2 (1999-12)

V interfaces at the digital Local Exchange (LE); V5.2 interface for the support of Access Network (AN); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

REN/SPS-09060-2

Vmesniki V pri digitalnih krajevnih centralah (LE) - Vmesnik V5.2 za podporo dostopovnemu omrežju (AN) - 2. del: Izjava o skladnosti izvedbe protokola (PICS) – Proforma specifikacija

General Information

• Status: Published
• Publication Date: 27-Dec-1999
• Technical Committee: SPS 9 - Access Networks and Service Node Interfaces
• Current Stage: 12 - Completion
• Due Date: 24-Dec-1999
• Completion Date: 28-Dec-1999
• Ref Project: SIST EN 300 347-2 V2.1.3:2005 - V interfaces at the digital Local Exchange (LE); V5.2 interface for the support of Access Network (AN); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 347-2 V2.1.3:2005
01-april-2005
Vmesniki V pri digitalnih krajevnih centralah (LE) - Vmesnik V5.2 za podporo
dostopovnemu omrežju (AN) - 2. del: Izjava o skladnosti izvedbe protokola (PICS)
– Proforma specifikacija
V interfaces at the digital Local Exchange (LE); V5.2 interface for the support of Access
Network (AN); Part 2: Protocol Implementation Conformance Statement (PICS) proforma
specification
Ta slovenski standard je istoveten z: EN 300 347-2 Version 2.1.3
ICS:
33.040.30 Komutacijski in signalizacijski Switching and signalling
sistem systems
SIST EN 300 347-2 V2.1.3:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 347-2 V2.1.3:2005

---------------------- Page: 2 ----------------------

SIST EN 300 347-2 V2.1.3:2005
ETSI EN 300 347-2 V2.1.3 (1999-12)
European Standard (Telecommunications series)
V interfaces at the digital Local Exchange (LE);
V5.2 interface for the support of Access Network (AN);
Part 2: Protocol Implementation Conformance
Statement (PICS) proforma specification

---------------------- Page: 3 ----------------------

SIST EN 300 347-2 V2.1.3:2005
2 ETSI EN 300 347-2 V2.1.3 (1999-12)
Reference
REN/SPS-09060-2
Keywords
V interface, V5 interface, LE, AN, PICS
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.:[phone] Fax:[phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
[e-mail]
Individual copies of this ETSI deliverable
can be downloaded from
http://www.etsi.org
If you find errors in the present document, send your
comment to: [e-mail]
Important notice
This ETSI deliverable may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network
drive within ETSI Secretariat.
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1999.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 347-2 V2.1.3:2005
3 ETSI EN 300 347-2 V2.1.3 (1999-12)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .6
1 Scope .7
2 References.7
3 Definitions.8
4 Abbreviations .8
5 Conformance .8
6 PICS proforma.9
6.1 Identification of the implementation.9
6.1.1 Implementation Under Test (IUT) identification .9
6.1.2 System Under Test (SUT) identification.9
6.1.3 Product supplier.9
6.1.4 Client .10
6.1.5 PICS contact person.10
6.2 PICS/System Conformance Statement (SCS).11
6.3 Identification of the protocol .11
6.4 Global statement of conformance.11
6.5 Local exchange.12
6.5.1 Main features .12
6.5.2 Protocol.13
6.5.2.1 Layer 1 .13
6.5.2.2 Layer 2 .13
6.5.2.3 Layer 3 .14
6.5.2.3.1 PSTN functions .14
6.5.2.3.2 PSTN protocol.14
6.5.2.3.3 Control protocol .14
6.5.2.3.4 Port control protocol.14
6.5.2.3.5 Common control protocol.15
6.5.2.3.6 BCC protocol.15
6.5.2.3.7 Protection protocol .15
6.5.2.3.8 Link control protocol.15
6.5.3 Protocol data units .16
6.5.3.1 PSTN protocol .16
6.5.3.1.1 Messages.16
6.5.3.1.2 Information elements; general .17
6.5.3.1.3 Information elements; pulse type.18
6.5.3.1.4 Information elements; steady signals .19
6.5.3.1.5 Information elements; cause types.20
6.5.3.1.6 Information elements; information element fields .20
6.5.3.2 Control protocol .21
6.5.3.2.1 Messages.21
6.5.3.2.2 Information elements; general .21
6.5.3.2.3 Information elements; port control .21
6.5.3.2.4 Information elements; common control .22
6.5.3.3 BCC protocol .23
6.5.3.3.1 Messages.23
6.5.3.3.2 Information elements .23
6.5.3.4 Protection switching protocol.23
6.5.3.4.1 Messages.23
6.5.3.4.2 Information elements .23
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 347-2 V2.1.3:2005
4 ETSI EN 300 347-2 V2.1.3 (1999-12)
6.5.3.5 Link control protocol.24
6.5.3.5.1 Messages.24
6.5.3.5.2 Information elements .24
6.6 Access network.25
6.6.1 Main features .25
6.6.2 Protocol.26
6.6.2.1 Layer 1 .26
6.6.2.2 Layer 2 .26
6.6.2.3 Layer 3 .27
6.6.2.3.1 PSTN protocol.27
6.6.2.3.2 Control protocol .27
6.6.2.3.3 Port control protocol.27
6.6.2.3.4 Common control protocol.28
6.6.2.3.5 BCC protocol.28
6.6.2.3.6 Protection protocol .28
6.6.2.3.7 Link control protocol.28
6.6.3 Protocol data units .29
6.6.3.1 PSTN protocol .29
6.6.3.1.1 Messages.29
6.6.3.1.2 Information elements; general .30
6.6.3.1.3 Information elements; pulse type.31
6.6.3.1.4 Information elements; steady signals .32
6.6.3.1.5 Information elements; cause types.33
6.5.3.1.6 Information elements; information element fields .33
6.6.3.2 Control protocol .34
6.6.3.2.1 Messages.34
6.6.3.2.2 Information elements; general .34
6.6.3.2.3 Information elements; port control .34
6.6.3.2.4 Information elements; common control .35
6.6.3.3 BCC protocol .36
6.6.3.3.1 Messages.36
6.6.3.3.2 Information elements .36
6.6.3.4 Protection switching protocol.36
6.6.3.4.1 Messages.36
6.6.3.4.2 Information elements .36
6.6.3.5 Link control protocol.37
6.6.3.5.1 Messages.37
6.6.3.5.2 Information elements .37
Annex A (informative): Instructions for completing the PICS proforma .38
A.1 Identification of the implementation.38
A.2 Global statement of conformance .38
A.3 Main features.38
A.4 Protocol .38
A.5 Protocol data units.38
History .39
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 347-2 V2.1.3:2005
5 ETSI EN 300 347-2 V2.1.3 (1999-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server
(http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Signalling
Protocols and Switching (SPS).
The present document is part 2 of a multi-part standard covering the V5.2 interface as described below:
Part 1: "V5.2 interface specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network layer (AN side)";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the network layer (AN side)";
Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network layer (LE side)";
Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the network layer (LE side)";
Part 7: "Test Suite Structure and Test Purposes (TSS&TP) specification for the data link layer";
Part 8: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the data link layer";
Part 9: "Test specification for the physical layer".
National transposition dates
Date of adoption of this EN: 10 December 1999
Date of latest announcement of this EN (doa): 31 March 2000
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 September 2000
Date of withdrawal of any conflicting National Standard (dow): 30 September 2000
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 347-2 V2.1.3:2005
6 ETSI EN 300 347-2 V2.1.3 (1999-12)
Introduction
To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and
options have been implemented for a given Open Systems Interconnection (OSI) protocol. Such a statement is called a
Protocol Implementation Conformance Statement (PICS).
NOTE: It is however possible to use the present document to indicate the basic requirements for an Access
Network (AN) or a Local Exchange (LE) required by a network operator. Specific requirements need to
be added, e.g. the Public Switched Telephone Network (PSTN) port characteristics and conditions.
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 347-2 V2.1.3:2005
7 ETSI EN 300 347-2 V2.1.3 (1999-12)
1 Scope
This second part of EN 300 347 defines the Protocol Implementation Conformance Statement (PICS) proforma for the
implementation flexibility allowed for a V5.2 interface defined in EN 300 347-1 [3] and the complementary standard
EN 300 324-1 [1]. It allows either the Network Operator to formulate the requirements for V5.2 interface implemented
in an Access Network (AN) or a Local Exchange (LE), or to decide whether an implementation meets these
requirements. It details in tabular form the implementation options, i.e. the optional functions additional to those which
are mandatory to implement.
The present document is in compliance with the relevant requirements and in accordance with the relevant guidance
given in ISO/IEC 9646-7 [5].
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] EN 300 324-1 (V2.1): "V interfaces at the digital Local Exchange (LE); V5.1 interface for the
support of Access Network (AN); Part 1: V5.1 interface specification".
[2] EN 300 324-2 (V2.1): "V interfaces at the digital Local Exchange (LE); V5.1 interface for the
support of Access Network (AN); Part 2: Protocol Implementation Conformance Statement (PICS)
proforma specification".
[3] EN 300 347-1 (V2.2): "V interfaces at the digital Local Exchange (LE); V5.2 interface for the
support of Access Network (AN); Part 1: V5.2 interface specification".
[4] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[5] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 347-2 V2.1.3:2005
8 ETSI EN 300 347-2 V2.1.3 (1999-12)
3 Definitions
For the purposes of the present document, the following definitions apply:
Protocol Implementation Conformance Statement (PICS): statement made by the supplier of an Open Systems
Interconnection (OSI) implementation or system, stating which capabilities have been implemented for a given OSI
protocol (see ISO/IEC 9646-1 [4])
PICS proforma: document, in the form of a questionnaire, designed by the protocol specifier or conformance test suite
specifier, which when completed for an OSI implementation or system becomes the PICS (see ISO/IEC 9646-1 [4])
Static conformance review: review of the extent to which the static conformance requirements are met by the
Implementation Under Test (IUT), accomplished by comparing the PICS with the static conformance requirements
expressed in the relevant standard(s) (see ISO/IEC 9646-1 [4])
4 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AN Access Network
AND Boolean "and"
C Conditional requirements (to be observed if the relevant conditions apply)
DTMF Dual Tone Multiple Frequency
ID Identification
IUT Implementation Under Test
LE Local Exchange
M Mandatory requirements (these are to be observed in all cases)
N/A Not supported, not applicable or the conditions for status are not met
No Not supported
NOT Absence of the item
NT1 Network Termination 1
O Option (may be selected to suit the implementation, provided that any requirements applicable to
the option are observed)
O.n Options, but support required for either at least one or only one of the options in the group labelled
with the same numeral "n"
OR Boolean "or"
OSI Open Systems Interconnection
PICS Protocol Implementation Conformance Statement
PSTN Public Switched Telephone Network
SCS System Conformance Statement
SUT System Under Test
Yes Supported
5 Conformance
The supplier of a protocol implementation which is claimed to conform to EN 300 347-1 [3] and to EN 300 324-1 [1] as
appropriate is required to complete a copy of the PICS proforma provided in the present document and is required to
provide the information necessary to identify both the supplier and the implementation.
The source file of the PICS proforma is contained in a .zip file which accompanies the present document.
ETSI

---------------------- Page: 10 ----------------------

SIST EN 300 347-2 V2.1.3:2005
9 ETSI EN 300 347-2 V2.1.3 (1999-12)
6 PICS proforma
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users
of the present document may freely reproduce the PICS proforma in this clause so that it can be used for its intended
purposes and may further publish the completed PICS.
6.1 Identification of the implementation
6.1.1 Implementation Under Test (IUT) identification
IUT name:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
IUT version:
.........................................................................................................................................................................................
6.1.2 System Under Test (SUT) identification
SUT name:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Hardware configuration:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Operating system:
.........................................................................................................................................................................................
6.1.3 Product supplier
Name:
.........................................................................................................................................................................................
Address:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................................
ETSI

---------------------- Page: 11 ----------------------

SIST EN 300 347-2 V2.1.3:2005
10 ETSI EN 300 347-2 V2.1.3 (1999-12)
Additional information:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
6.1.4 Client
Name:
......................................................................................................
...