Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Receiver technical requirements, parameters and measurement procedures to fulfil the requirements of the Directive 2014/53/EU

DTS/ERM-TGUWB-140

General Information

Status
Published
Publication Date
30-Mar-2016
Technical Committee
Current Stage
12 - Completion
Due Date
01-Apr-2016
Completion Date
31-Mar-2016
Ref Project

Buy Standard

Standard
ETSI TS 103 361 V1.1.1 (2016-03) - Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Receiver technical requirements, parameters and measurement procedures to fulfil the requirements of the Directive 2014/53/EU
English language
61 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ETSI TS 103 361 V1.1.1 (2016-03)






TECHNICAL SPECIFICATION
Short Range Devices (SRD)
using Ultra Wide Band technology (UWB);
Receiver technical requirements, parameters and
measurement procedures to fulfil the requirements of the
Directive 2014/53/EU

---------------------- Page: 1 ----------------------
2 ETSI TS 103 361 V1.1.1 (2016-03)



Reference
DTS/ERM-TGUWB-140
Keywords
measurement, receiver, SRD, UWB

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 103 361 V1.1.1 (2016-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 11
3.1 Definitions . 11
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Purpose of receiver parameters . 13
5 Receiver performance criteria and level of performance . 14
6 Receiver parameters . 14
6.1 Introduction . 14
6.2 Receiver parameters in ETSI EG 203 336 . 14
6.2.1 Receiver sensitivity . 14
6.2.2 Receiver co-channel rejection . 15
6.2.3 Receiver Selectivity and Blocking . 15
6.2.4 Receiver dynamic range . 15
6.2.5 Reciprocal mixing . 15
6.2.6 Desensitisation . 16
6.3 Receiver parameter for ultra-wideband applications: Interferer signal handling. 16
7 Potential interferers . 17
7.1 Introduction . 17
7.2 Complete list of interferers . 17
7.3 The concept of service groups and interferer power levels . 24
7.4 Interferers for indoor applications . 24
7.5 Interferers for outdoor applications . 27
7.6 Interferers for mobile (indoor and outdoor) applications . 30
7.7 Interferers for level probing and tank level probing applications . 33
7.8 Interferers for automotive applications . 37
7.8.1 Devices inside the surface and not in the passenger area . 37
7.8.2 Devices outside the surface or within the passenger area . 38
8 Test signal . 39
9 Test procedure . 40
9.1 Definitions . 40
9.1.1 Receiver operating frequency range . 40
9.1.2 Interferer test frequency range . 40
9.2 Test setup. 40
9.2.1 Definition of the scenario, performance criterion and level of performance . 40
9.2.2 Required text for the user manual . 41
9.2.3 DUT orientations and polarization directions . 41
9.2.4 Environmental conditions . 41
9.3 Test for interferer signal handling . 41
9.4 Recommended tests . 42
9.4.1 Building material sensor . 42
9.4.2 Respiration sensor . 43
9.4.3 Presence sensor . 43
9.4.4 Distance measurement system . 43
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 103 361 V1.1.1 (2016-03)
9.4.5 On-body pulse rate sensor . 44
9.4.6 Communications device . 44
9.4.7 (T)LPR Method . 45
9.4.8 GPR/WPR device . 47
Annex A (informative): Information on Performance Criteria . 48
A.1 Communication devices . 48
A.2 Sensor devices . 51
Annex B (informative): Text blocks for harmonised standards . 52
B.1 Receiver Conformance Requirements (4.4) . 52
B.2 Conformance methods of measurement for receiver (6.6) . 52
Annex C (informative): Test signal generation . 53
Annex D (informative): Derivation of the Equations for (T)LPR . 57
Annex E (informative): Change History . 60
History . 61


ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 103 361 V1.1.1 (2016-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and
Radio spectrum Matters (ERM).
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
In June 2016, the Directive 2014/53/EU [i.1] will replace the R&TTE Directive [i.2]. One of the main differences is
that article 3.2 of the new Directive requires not only transmitters/transceivers, but also receivers to use spectrum
efficiently and effectively and protect against harmful interference.
ETSI has published ETSI EG 203 336 [i.3] covering receiver parameters to be considered when updating harmonised
standards. However, the parameter selection in that guide suggests that it was written with narrowband systems
operating in licensed, channelized bands in mind.
The present document contains the results of the specialist task force (STF) 494 dealing with receiver parameters for
ultra-wideband (UWB) applications.

ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 103 361 V1.1.1 (2016-03)
1 Scope
The present document specifies receiver technical requirements, parameters and measurement procedures for UWB
technologies.
It is a reference document for drafting new or revised UWB harmonised standards to fulfil the requirements of the
Directive 2014/53/EU [i.1].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 303 883: "Short Range Devices (SRD) using Ultra Wide Band (UWB); Measurement
Techniques".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity.
[i.3] ETSI EG 203 336: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Guide for
the selection of technical parameters for the production of Harmonised Standards covering
article 3.1(b) and article 3.2 of Directive 2014/53/EU".
[i.4] IEEE 802.15.4™-2011: "Part 15.4: Low-rate wireless personal area networks (LR-WPANs)",
September 2011.
[i.5] ETSI EN 302 510-1 (V1.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Radio equipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low Power Active
Medical Membrane Implants and Accessories; Part 1: Technical characteristics and test methods".
[i.6] ETSI TR 102 309 (V1.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Ultra Low Power Active Medical Implants (ULP-AMI); "Membrane Implant" devices operating in
the 30 MHz to 37,5 MHz band; System Reference Document".
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 103 361 V1.1.1 (2016-03)
[i.7] ETSI EN 300 220-1 (V2.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency
range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test
methods".
[i.8] ETSI EN 300 224-1 (V1.3.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
On-site paging service; Part 1: Technical and functional characteristics, including test methods".
[i.9] ETSI EN 302 077-1 (V1.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Transmitting equipment for the Terrestrial - Digital Audio Broadcasting (T-DAB) service; Part 1:
Technical characteristics and test methods".
[i.10] ETSI EN 302 054-1 (V1.2.1): "Meteorological Aids (Met Aids); Radiosondes to be used in the
400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 1:
Technical characteristics and test methods".
[i.11] ETSI EN 302 152-1 (V1.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Satellite Personal Locator Beacons (PLBs) operating in the 406,0 MHz to 406,1 MHz frequency
band; Part 1: Technical characteristics and methods of measurement".
[i.12] ETSI EN 301 502 (V12.1.6): "Global System for Mobile communications (GSM); Base Station
(BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of the
Directive 2014/53/EU".
[i.13] ETSI TS 145 005 (V12.5.0): "Digital cellular telecommunications system (Phase 2+); Radio
transmission and reception (3GPP TS 45.005 version 12.5.0 Release 12)".
[i.14] ETSI EN 301 511 (V12.1.1): "Global System for Mobile communications (GSM); Harmonized
EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements
under article 3.2 of the R&TTE directive (1999/5/EC)".
[i.15] ETSI EN 302 208-1 (V2.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with
power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Part 1:
Technical requirements and methods of measurement".
[i.16] ETSI EN 302 018-1 (V1.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 1:
Technical characteristics and test methods".
[i.17] ETSI EN 300 422-2 (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN covering
the essential requirements of article 3.2 of the R&TTE Directive".
[i.18] ETSI EN 301 908-13 (V11.0.1 draft): "IMT cellular networks; Harmonised EN covering the
essential requirements of article 3.2 of the R&TTE Directive; Part 13: Evolved Universal
Terrestrial Radio Access (E-UTRA) User Equipment (UE)".
[i.19] ETSI EN 301 908-3 (V7.1.1): "IMT cellular networks; Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive; Part 3: CDMA Direct Spread (UTRA FDD)
Base Stations (BS)".
[i.20] ETSI EN 301 908-2 (V11.0.1 draft): "IMT cellular networks; Harmonised Standard covering the
essential requirements of article 3.2 of the Radio Equipment Directive 2014/53/EU; Part 2: CDMA
Direct Spread (UTRA FDD) User Equipment (UE)".
[i.21] ETSI EN 301 908-4 (V6.2.1): "IMT cellular networks; Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier (cdma2000)
User Equipment (UE)".
[i.22] ETSI EN 301 908-5 (V5.2.1): "IMT cellular networks; Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive; Part 5: CDMA Multi-Carrier (cdma2000)
Base Stations (BS)".
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 103 361 V1.1.1 (2016-03)
[i.23] ETSI EN 300 422-1 (V1.5.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 1: Technical characteristics
and methods of measurement".
[i.24] ETSI EN 301 166-1 (V1.3.2): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or
data) and operating on narrow band channels and having an antenna connector; Part 1: Technical
characteristics and methods of measurement".
[i.25] ETSI TS 100 910 (V8.20.0): "Digital cellular telecommunications system (Phase 2+); Radio
Transmission and Reception (3GPP TS 05.05 version 8.20.0 Release 1999)".
[i.26] ETSI TS 136 104 (V12.9.0): "LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base
Station (BS) radio transmission and reception (3GPP TS 36.104 version 12.9.0 Release 12)".
[i.27] ETSI TS 136 101 (V12.7.0): "LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); User
Equipment (UE) radio transmission and reception (3GPP TS 36.101 version 12.7.0 Release 12)".
[i.28] ETSI TS 125 101 (V12.6.0): "Universal Mobile Telecommunications System (UMTS); User
Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 12.7.0
Release 12)".
[i.29] ETSI EN 301 908-10 (V4.2.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation
cellular networks; Part 10: Harmonised Standard for IMT-2000, FDMA/TDMA (DECT) covering
the essential requirements of article 3.2 of the Directive 2014/53/EU".
[i.30] ETSI EN 300 175-2 (V2.6.1): "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 2: Physical Layer (PHL)".
[i.31] 3GPP2 C.S0002-E (V3.0): "Physical Layer Standard for cdma2000 Spread 2 Spectrum Systems".
[i.32] ETSI EN 301 908-6 (V5.2.1): "IMT cellular networks; Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive; Part 6: CDMA TDD (UTRA TDD) User
Equipment (UE)".
[i.33] ETSI TS 125 102: "Universal Mobile Telecommunications System (UMTS); User Equipment
(UE) radio transmission and reception (TDD) (3GPP TS 25.102)".
[i.34] ETSI EN 301 908-7 (V5.2.1): "IMT cellular networks; Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive; Part 7: CDMA TDD (UTRA TDD) Base
Stations (BS)".
[i.35] ETSI TS 125 104: "Universal Mobile Telecommunications System (UMTS); Base Station (BS)
radio transmission and reception (FDD) (3GPP TS 25.104)".
[i.36] ETSI EN 301 908-14: "IMT cellular networks; Harmonised EN covering the essential
requirements of article 3.2 of the R&TTE Directive; Part 14: Evolved Universal Terrestrial Radio
Access (E-UTRA) Base Stations (BS)".
[i.37] ETSI EN 302 064 (2.1.0): "Wireless Video Links operating in the 1,3 GHz to 50 GHz frequency
band; Harmonised Standard covering the essential requirements of article 3.2 of the
Directive 2014/53/EU".
[i.38] 3GPP2 C.S0010-D (V1.0): "Recommended Minimum Performance Standards for cdma2000
Spread Spectrum Base Stations".
[i.39] ETSI EN 301 908-19: "IMT cellular networks; Harmonised Standard covering the essential
requirements of article 3.2 of the Directive 2014/53/EU; Part 19: OFDMA TDD WMAN (Mobile
TM
WiMAX ) TDD User Equipment (UE)".
[i.40] ETSI EN 301 908-20: "IMT cellular networks; Harmonised Standard covering the essential
requirements of article 3.2 of the Directive 2014/53/EU; Part 20: OFDMA TDD WMAN (Mobile
WiMAXTM) TDD Base Stations (BS)".
ETSI

---------------------- Page: 8 ----------------------
9 ETSI TS 103 361 V1.1.1 (2016-03)
[i.41] ETSI EN 300 440: "Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to
40 GHz frequency range; Harmonized Standard covering the essential requirements of article 3.2
of the Directive for 2014/53/EU".
[i.42] ETSI EN 300 328: "Wideband transmission systems; Data transmission equipment operating in the
2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering
the essential requirements of article 3.2 of the Directive 2014/53/EU".
[i.43] ETSI EN 303 203 (V2.1.1): "Short Range Devices (SRD); Medical Body Area Network Systems
(MBANSs) operating in the 2 483,5 MHz to 2 500 MHz range; Harmonised Standard covering the
essential requirements of article 3.2 of the Directive 2014/53/EU".
[i.44] ETSI EN 301 559: "Low Power Active Medical Implants (LP-AMI) operating in the frequency
range 2 483,5 MHz to 2 500 MHz Harmonised Standard covering the essential requirements of
article 3.2 of the Directive 2014/53/EU".
[i.45] ETSI EN 301 908-16 (V4.2.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation
cellular networks; Part 16: Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra
Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE
Directive".
[i.46] ETSI EN 301 908-17 (V4.2.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation
cellular networks; Part 17: Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra
Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R&TTE
Directive".
[i.47] ECC Report 174: "Compatibility between the mobile service in the band 2500-2690 MHz and the
radiodetermination service in the band 2700-2900 MHz".
[i.48] ECC Report 219: "Characteristics of PMSE digital video links to be used in compatibility and
sharing studies".
[i.49] ETSI EN 302 625 (V1.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
5 GHz BroadBand Disaster Relief applications (BBDR); Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive".
[i.50] ETSI EN 301 893 (V1.8.1): "Broadband Radio Access Networks (BRAN); 5 GHz high
performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the
R&TTE Directive".
[i.51] ETSI EN 302 502 (V1.2.1): "Broadband Radio Access Networks (BRAN); 5,8 GHz fixed
broadband data transmitting systems; Harmonized EN covering the essential requirements of
article 3.2 of the R&TTE Directive".
[i.52] ETSI EN 300 674-1 (V1.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC)
transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and
Medical (ISM) band; Part 1: General characteristics and test methods for Road Side Units (RSU)
and On-Board Units (OBU)".
[i.53] ETSI EN 302 217 (All parts): "Fixed Radio Systems; Characteristics and requirements for point-
to-point equipment and antennas".
[i.54] ETSI EN 302 217-3 (V2.2.1), annex UBa.2: "Fixed Radio Systems; Characteristics and
requirements for point-to-point equipment and antennas; Part 3: Equipment operating in frequency
bands where both frequency coordinated or uncoordinated deployment might be applied;
Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
[i.55] ETSI EN 302 729: "Short Range Devices (SRD); Equipment for Detection and Movement; Level
Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz
to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering essential
requirements of article 3.2 of the Directive 2014/53/EU".
ETSI

---------------------- Page: 9 ----------------------
10 ETSI TS 103 361 V1.1.1 (2016-03)
[i.56] ETSI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.