ETSI ETS 300 607-3 ed.3 (1997-05)
Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS) conformance specification; Part 3: Layer 3 (L3) Abstract Test Suite (ATS) (GSM 11.10-3)
Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS) conformance specification; Part 3: Layer 3 (L3) Abstract Test Suite (ATS) (GSM 11.10-3)
RE/SMG-071110PR1-3
Digitalni celični telekomunikacijski sistem (faza 2) – Specifikacija skladnosti za mobilne postaje (MS) – 3. del: Abstraktni preskušalni niz (ATS) tretje plasti (L3) (GSM 11.10-3)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS) conformance specification; Part 3: Layer 3 (L3) Abstract Test Suite (ATS) (GSM 11.10-3)33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)ICS:Ta slovenski standard je istoveten z:ETS 300 607-3 Edition 3SIST ETS 300 607-3 E3:2003en01-december-2003SIST ETS 300 607-3 E3:2003SLOVENSKI
STANDARD
EUROPEANETS 300 607-3TELECOMMUNICATIONMay 1997STANDARDThird EditionSource: ETSI TC-SMGReference: RE/SMG-071110PR1-3ICS:33.020Key words:Digital cellular telecommunications system, Global System for Mobile communications (GSM)GLOBAL SYSTEM
FOR MOBILE COMMUNICATIONSRDigital cellular telecommunications system (Phase 2);Mobile Station (MS) conformance specification;Part 3: Layer 3 (L3) Abstract Test Suite (ATS)(GSM 11.10-3)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1997. All rights reserved.SIST ETS 300 607-3 E3:2003
Page 2ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 607-3 E3:2003
Page 3ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997ContentsForeword.91Scope.102Normative references.103Definitions, symbols and abbreviations.133.1Definitions.133.2Abbreviations.134Test Suite Structure (TSS).144.1Test suite naming convention.144.2Suite Overview.154.3Test groups.154.3.1Valid Behaviour tests (BV).154.3.2Invalid Behaviour/Inopportune Behaviour tests (BI-BO).164.4Test Step Structure.164.4.1Preambles.164.4.2Postambles.165Test Purposes (TP).165.1TP and test case naming convention.166Abstract test method and test configurations.166.1Test system model.176.2Test Method.17Annex A:Abstract Test Suite.18Suite overview.19Suitestructure.19Testcase index.20Teststep index.32Defaultindex.43Declarations Part.44Testsuite type definitions.44Simpletype definitions.44StructuredType definitions.46ASN1type definitions.68Testsuite operation definitions.91Testsuite parameter declarations.147Testcase selection expression definitions.166Testsuite constant declarations.169Testcase variable declarations.187PCOdeclarations.191Timerdeclarations.191ASPtype definitions.191TTCNASP Type definitions.191PDUtype definitions.218TTCNPDU Type definitions.218Constraints Part.244Testsuite type constraint declarations.244Structuredtype constraint declarations.244ASN1type constraints.764SIST ETS 300 607-3 E3:2003
Page 4ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997ASPconstraint declarations.778TTCNASP constraint declarations.778PDUconstraint declarations.892TTCNPDU constraint declarations.892Dynamic Part.1126TestCases.1126TestGroup General.1126TestGroup InitialTest.1155TestGroup IdleMode.1177TestGroup BiBo.1180TestGroup RR.1214TestGroup MM.1367TestGroup CC.1424TestGroup StructureProc.1491TestGroup EGSMSignalling.1514TestGroup SS.1536TestGroup SM.1629TestStep Library.1657TestStep Group management.1657TestStep Group ChConfig.1660TestStep Group Miscellaneous.1690TestStep Group SysInfo.1724TestStep Group OperatorOP.1786TestStep Group Postambles.1789TestStep Group Preambles.1792DefaultsLibrary.1898Annex B:Partial IXIT proforma.1905Introduction.1905B.1Identification Summary.1906B.2Abstract Test Suite Summary.1906B.3Test Laboratory.1906B.3.1Test Laboratory Identification.1906B.3.2Accreditation status of the test service.1907B.3.3Manager of Test Laboratory.1907B.3.4Contact person of Test Laboratory.1907B.3.5Means of Testing.1907B.3.6Instructions for Completion.1908B.4Client.1909B.4.1Client Identification.1909B.4.2Client Test Manager.1910B.4.3Client Contact person.1910B.4.4Test Facilities Required.1910B.5System Under Test.1911B.5.1SUT Information.1911B.5.2Limitations of the SUT.1912B.5.3Environmental Conditions.1913B.6Ancillary Protocols.1915B.6.1Ancillary Protocols 1.1915B.6.2Ancillary Protocols 2.1915B.7Protocol Layer Information for L3 of Mobile Station.1915B.7.1Protocol Identification.1915B.7.2Parameter Values.1915B.7.2.1Parameters related to Physical Resources.1915SIST ETS 300 607-3 E3:2003
Page 5ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997B.7.2.1.1Parameter TSPX_AltNb.1915B.7.2.1.2Parameter TSPX_BCCHcarrierA.1916B.7.2.1.3Parameter TSPX_BCCHcarrierB.1916B.7.2.1.4Parameter TSPX_BCCHcarrierA_HO.1916B.7.2.1.5Parameter TSPX_BCCHcarrierB_HO.1917B.7.2.1.6Parameter TSPX_TCHcarrierA.1917B.7.2.1.7Parameter TSPX_TCHcarrierA_ho.1917B.7.2.1.8Parameter TSPX_TCHcarrierB.1918B.7.2.1.9Parameter TSPX_TCHcarrierB_ho.1918B.7.2.1.10Parameter TSPX_TCHcarrierB2_ho.1918B.7.2.1.11Parameters for Time Slot.1919B.7.2.2Parameters related logical channel.1919B.7.2.2.1Parameters for SDDCH4 Subchannels.1919B.7.2.2.2Parameters for SDDCH8 Subchannels.1920B.7.2.2.3Parameters for Half Rate Traffic Subchannels.1921B.7.2.3Parameters related to Mobile Station.1922B.7.2.3.1Parameter TSPX_ChModeA.1922B.7.2.3.2Parameter TSPX_ChModeB.1922B.7.2.3.3Parameter TSPX_ChModeC.1922B.7.2.3.4Parameter TSPX_ChModeD.1922B.7.2.3.5Parameter TSPX_ChModeE.1923B.7.2.3.6Parameter TSPX_ChModeF.1923B.7.2.3.7Parameter TSPX_ChModeG.1923B.7.2.3.8Parameter TSPX_ChModeH.1924B.7.2.3.9Parameter TSPX_ChModeI.1924B.7.2.3.10Parameter TSPX_ChModeJ.1924B.7.2.3.11Parameter TSPX_UuInfo.1924B.7.2.3.12Parameters for selection of a circuit switched basicservices.1925B.7.2.3.13Parameters of Bearer Capability.1927B.7.2.3.13.1Parameter TSPX_BCa.1927B.7.2.3.13.2Parameter TSPX_BCb.1928B.7.2.3.14Parameter TSPX_BC2.1929B.7.2.3.15Parameters for Low Layer Compatibility.1930B.7.2.3.15.1Parameter TSPX_LLCmpA.1930B.7.2.3.15.2Parameter TSPX_LLCmpB.1931B.7.2.3.16Parameters for High Layer Compatibility.1931B.7.2.3.16.1Parameter TSPX_HLCmpA.1931B.7.2.3.16.2Parameter TSPX_HLCmpB.1932B.7.2.3.17Parameter TSPX_IMSI.1932B.7.2.3.18Parameter TSPX_IMEI.1932B.7.2.3.19Parameter TSPX_IMEISV.1933B.7.2.3.20Parameter TSPX_MSTxpwrMax.1933B.7.2.3.21Parameters for Power Level.1933B.7.2.3.22Parameter TSPX_TMSI.1933B.7.2.3.23Parameter TSPX_TMSI1.1934B.7.2.3.24Parameters for Basic service selection.1935B.7.2.4Test Case related Parameters.1936B.7.2.4.1Parameters for extended assignment test.1936B.7.2.4.2Parameters for assignment rejection test.1937B.7.2.4.3Parameters for paging re-organization test 1.1937B.7.2.4.4Parameters for paging re-organization test 2.1937B.7.2.4.5Parameters for paging as before test.1938B.7.2.4.6Parameters for paging multi CCCH test.1938B.7.2.4.7Parameters for pre-synch handover no TA test.1939B.7.2.4.8Parameters for pre-synch handover with TA test.1939B.7.2.4.9Parameters for pseudo-synch handover test.1939B.7.2.4.10Parameters for non-synch handover test.1939B.7.2.4.11Parameters for TC_26_6_4_1.1940B.7.2.4.12Parameters for TC_26_6_13_1.1940B.7.2.4.13Parameters for TC_26_6_13_2.1942B.7.2.4.14Parameters for TC_26_6_13_3.1943B.7.2.4.15Parameters for TC_26_6_13_4.1944SIST ETS 300 607-3 E3:2003
Page 6ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997B.7.2.4.16Parameters for TC_26_6_13_5.1946B.7.2.4.17Parameters for TC_26_6_13_6.1947B.7.2.4.18Parameters for TC_26_6_13_7.1949B.7.2.4.19Parameters for TC_26_6_13_8.1950B.7.2.4.20Parameters for TC_26_6_13_9.1952B.7.2.4.21Parameters for TC_26_6_13_10.1953B.7.2.5Parameters for Setup message.1954B.7.2.5.1Telephony.1955B.7.2.5.2Alternate Speech and G3 Fax.1964B.7.2.5.3Automatic G3 fax.1973B.7.2.5.4Data circuit duplex async. 300 bit/s.1982B.7.2.5.5Data circuit duplex async. 1 200 bit/s.1991B.7.2.5.6Data circuit duplex async. 1 200/75 bit/s.2000B.7.2.5.7Data circuit duplex async. 2 400 bit/s.2009B.7.2.5.8Data circuit duplex async. 4 800 bit/s.2018B.7.2.5.9Data circuit duplex async. 9 600 bit/s.2027B.7.2.5.10Data circuit duplex sync. 1 200 bit/s.2036B.7.2.5.11Data circuit duplex sync. 2 400 bit/s.2045B.7.2.5.12Data circuit duplex sync. 4 800 bit/s.2054B.7.2.5.13Data circuit duplex sync. 9 600 bit/s.2063B.7.2.5.14PAD Access 300 bit/s.2072B.7.2.5.15PAD Access 1 200 bit/s.2081B.7.2.5.16PAD Access 1 200/75 bit/s.2090B.7.2.5.17PAD Access 2 400 bit/s.2099B.7.2.5.18PAD Access 4 800 bit/s.2108B.7.2.5.19PAD Access 9 600 bit/s.2117B.7.2.5.20Packet Access 2 400 bit/s.2126B.7.2.5.21Packet Access 4 800 bit/s.2135B.7.2.5.22Packet Access 9 600 bit/s.2144B.7.2.5.23Alternate Speech/Data.2153B.7.2.5.24Speech Followed by Data.2162B.7.2.6Other Parameters.2170B.7.2.6.1Parameter TSPX_MAIO.2170B.7.2.6.2Parameter TSPX_Cause.2170B.7.2.6.3Parameters for Ciphering Key Sequence Number.2171B.7.2.6.4Parameter TSPX_Txint.2171B.7.2.6.5Parameter TSPX_MaxRetrans.2172B.7.2.6.6Parameters for Handover reference.2172B.7.2.6.7Parameters for the number of Handover accesses.2173B.7.2.6.8Parameter TSPX_HSN.2174B.7.2.6.9Parameters for RAND.2174B.7.2.6.10Parameter TSPX_k.2175B.7.2.6.11Parameter TSPX_y.2175B.7.2.6.12Parameter TSPX_Ki.2176B.7.2.6.13Parameters for Channel Type (full or half rate) of CC test2176B.7.2.6.14Parameters for Ciphering Algorithm.2177B.7.2.6.15Parameters for Training Sequence Code.2178B.7.2.6.16Parameters for Timing Advance.2179B.7.2.6.17Parameter TSPX_WaitForFac.2180B.7.2.6.18Parameter TSPX_WaitForConnACK.2180B.7.2.6.19Parameter TSPX_PathH1.2181B.7.2.6.20Parameter TSPX_PathH2.2181B.7.2.7Questions on antenna and power supply.2181B.7.2.7.1Type of antenna.2181B.7.2.7.2Power supply.2181B.7.2.7.3External RF amplifier.2182B.7.2.7.4SIM removal support.2182B.7.2.7.5Parameter TSPX_MaxCPDataRetx.2182B.7.2.7.6Parameter TSPX_DTMFInd.2182B.7.2.7.7Parameter TSPX_CallCntrlCap.2183B.7.2.7.8Parameter TSPX_ClassMark1.2183B.7.2.7.9Parameter TSPX_ClassMark2.2183B.7.2.7.10Parameter TSPX_ClassMark2Amp.2184SIST ETS 300 607-3 E3:2003
Page 7ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997B.7.2.7.11Parameter TSPX_ClassMark3.2184B.7.2.8Test Suite Timer Values.2185B.7.2.9Man machine Interface.2185Annex C:PCTR Proforma.2191History.2192SIST ETS 300 607-3 E3:2003
Page 8ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997Blank pageSIST ETS 300 607-3 E3:2003
Page 9ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997ForewordThis European Telecommunication Standard (ETS) has been produced by the Special Mobile Group(SMG) Technical Committee of the European Telecommunications Standards Institute (ETSI).This ETS describes the technical characteristics and methods of test for Mobile Stations (MSs), operatingin the 900 MHz and 1 800 MHz frequency band (GSM 900 and DCS 1 800) within the digital cellulartelecommunications system.This ETS corresponds to GSM technical specification GSM 11.10-3 version 4.17.1.This part of the ETS (Part 3), contains Tree and Tabular Combined Notation (TTCN) for Layer 3conformity specifications for which mobile stations, within the digital cellular telecommunications system(Phase 2), are tested for compliance.The graphical form ATSThe TTCN.GR representation of this ATS is contained in annex A of this ETS.The machine processable ATSThe electronic forms of the machine processable files (TTCN MP format) corresponding to the ATS forLayer 3 are contained in the file L3-4171.mp1) (Layer 3) on the diskette included as a part of this ETS(Part 3).ETS 300 607 consists of three parts, which have the following ETS numbers and titles:ETS 300 607-1Digital cellular telecommunications system (Phase 2);Mobile Station (MS) conformance specification;Part 1: Conformance specification;Reference: GSM 11.10-1.ETS 300 607-2Digital cellular telecommunications system (Phase 2);Mobile Station (MS) conformance specification;Part 2: Protocol Implementation Conformance Statement (ICS);proforma specificationReference: GSM 11.10-2.ETS 300 607-3Digital cellular telecommunications system (Phase 1);Mobile Station (MS) conformance specification;Part 3: Layer 3 (L3) Abstract Test Suite (ATS);Reference: GSM 11.10-3.Transposition datesDate of adoption:2 August 1996Date of latest announcement of this ETS (doa):31 August 1997Date of latest publication of new National Standardor endorsement of this ETS (dop/e):28 February 1998Date of withdrawal of any conflicting National Standard (dow):28 February 1998
1)This file is located in an archive file named 6073_E3.LZH. Other file formats are available on request.SIST ETS 300 607-3 E3:2003
Page 10ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 19971ScopeThis European Telecommunication Standard (ETS) specifies the Abstract Test Suite (ATS) and partialIXIT proforma for the Network Layer (Layer 3) at the mobile radio interface of the GSM or DCS (Phase 2)mobile stations (MS) conforming to the ETSs for the Radio Resource management, the MobilityManagement, the circuit-switched Call Control, the Supplementary Services and Short Message Servicesfor the digital cellular telecommunications systems (Phase 2).The ISO standards for the methodology of conformance testing are used as the basis for the testspecifications.2Normative referencesThis ETS incorporates by dated and undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references, thelatest edition of the publication referred to applies.[1]ISO/IEC 9 646-1: "Information Technology-OSI- Conformance TestingMethodology and Framework, Part 1: General Concepts".[2]ISO/IEC 9 646-2: "Information Technology-OSI- Conformance TestingMethodology and Framework, Part 2: Abstract Test Suite Specification".[3]ISO/IEC 9 646-3: "Information Technology-OSI- Conformance TestingMethodology and Framework, Part 3: The Tree and Tabular CombinedNotation".[4]ISO/IEC 9 646-5: "Information Technology-OSI- Conformance TestingMethodology and Framework, Part 5: Requirements on test laboratories andclients for the conformance assessment process".[5]ISO/IEC 8 824: "Information Technology-OSI- Specification of Abstract SyntaxNotation One (ASN.1)".[6]ISO/IEC 8 825: "Information Technology-OSI- Specification of Basic EncodingRules for Abstract Syntax Notation One (ASN.1)".[7]ITU-T Recommendation Q.773: "Specifications of Signalling System No.7;Transaction capabilities formats and encoding".[8]ETS 300 287: "Integrated Services Digital Network (ISDN); CCITT SignallingSystem No.7, Transaction Capabilities Application Part (TCAP) version 2".[9]ETS 300 406 (January 1995): "Methods for Testing and Specification (MTS);Protocol and profile conformance testing specifications: Standardizationmethodology".[10]ETS 300 501 (GSM 02.02): "Digital cellular telecommunications system(Phase 2); Bearer Services (BS) supported by a GSM Public Land MobileNetwork (PLMN)".[11]ETS 300 502 (GSM 02.03): "Digital cellular telecommunications system(Phase 2); Teleservices supported by a GSM Public Land Mobile Network(PLMN)".[12]ETS 300 504 (GSM 02.06): "Digital cellular telecommunications system(Phase 2); Types of Mobile Stations (MS)".[13]ETS 300 505 (GSM 02.07): "Digital cellular telecommunications system(Phase 2); Mobile Station (MS) features".SIST ETS 300 607-3 E3:2003
Page 11ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997[14]ETS 300 511 (GSM 02.30): "Digital cellular telecommunications system(Phase 2); Man-Machine Interface (MMI) of the Mobile Station (MS)".[15]ETS 300 523 (GSM 03.03): "Digital cellular telecommunications system(Phase 2); Numbering, addressing and identification".[16]ETS 300 527 (GSM 03.09): "Digital cellular telecommunications system(Phase 2); Handover procedures".[17]ETS 300 528 (GSM 03.10): "Digital cellular telecommunications system(Phase 2); GSM Public Land Mobile Network (PLMN) connection types".[18]ETS 300 529 (GSM 03.11): "Digital cellular telecommunications system(Phase 2); Technical realization of supplementary services".[19]ETS 300 530 (GSM 03.12): "Digital cellular telecommunications system(Phase 2); Location registration procedures".[20]ETS 300 532 (GSM 03.14): "Digital cellular telecommunications system(Phase 2); Support of Dual Tone Multi-Frequency signalling (DTMF) via theGSM system".[21]ETS 300 535 (GSM 03.22): "Digital cellular telecommunications system(Phase 2); Functions related to Mobile Station (MS) in idle mode".[22]ETS 300 536 (GSM 03.40): "Digital cellular telecommunications system(Phase 2); Technical realization of the Short Message Service (SMS)Point-to-Point (PP)".[23]ETS 300 537 (GSM 03.41): "Digital cellular telecommunications system(Phase 2); Technical realization of Short Message Service Cell Broadcast(SMSCB)".[24]ETS 300 550 (GSM 04.01): "Digital cellular telecommunications system(Phase 2); Mobile Station - Base Station System (MS - BSS) interface Generalaspects and principles".[25]ETS 300 552 (GSM 04.03): "Digital cellular telecommunications system(Phase 2); Mobile Station - Base Station System (MS - BSS) interface Channelstructures and access capabilities".[26]ETS 300 553 (GSM 04.04): "Digital cellular telecommunications system(Phase 2); layer 1 General requirements".[27]ETS 300 554 (GSM 04.05): "Digital cellular telecommunications system(Phase 2); Data Link (DL) layer General aspects".[28]ETS 300 555 (GSM 04.06): "Digital cellular telecommunications system(Phase 2); Mobile Station - Base Station System (MS - BSS) interface Data Link(DL) layer specification".[29]ETS 300 556 (GSM 04.07): "Digital cellular telecommunications system(Phase 2); Mobile radio interface signalling layer 3 General aspects".[30]ETS 300 557 (GSM 04.08): "Digital cellular telecommunications system(Phase 2); Mobile radio interface layer 3 specification".[31]ETS 300 558 (GSM 04.10): "Digital cellular telecommunications system(Phase 2); Mobile radio interface layer 3 Supplementary services specificationGeneral aspects".SIST ETS 300 607-3 E3:2003
Page 12ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997[32]ETS 300 559 (GSM 04.11): "Digital cellular telecommunications system(Phase 2); Point-to-Point (PP) Short Message Service (SMS) support on mobileradio interface".[33]ETS 300 560 (GSM 04.12): "Digital cellular telecommunications system(Phase 2); Short Message Service Cell Broadcast (SMSCB) support on themobile radio interface".[34]ETS 300 564 (GSM 04.80): "Digital cellular telecommunications system(Phase 2); Mobile radio interface layer 3 supplementary services specificationFormats and coding".[35]ETS 300 565 (GSM 04.81): "Digital cellular telecommunications system(Phase 2); Line identification supplementary services - Stage 3".[36]ETS 300 566 (GSM 04.82): "Digital cellular telecommunications system(Phase 2); Call Forwarding (CF) supplementary services - Stage 3".[37]ETS 300 567 (GSM 04.83): "Digital cellular telecommunications system(Phase 2); Call Waiting (CW) and Call Hold (HOLD) supplementary services -Stage 3".[38]ETS 300 568 (GSM 04.84): "Digital cellular telecommunications system(Phase 2); MultiParty (MPTY) supplementary services - Stage 3".[39]ETS 300 569 (GSM 04.85): "Digital cellular telecommunications system(Phase 2); Closed User Group (CUG) supplementary services - Stage 3".[40]ETS 300 570 (GSM 04.86): "Digital cellular telecommunications system(Phase 2); Advice of Charge (AoC) supplementary services - Stage 3".[41]ETS 300 571 (GSM 04.88): "Digital cellular telecommunications system(Phase 2); Call Barring (CB) supplementary services - Stage 3".[42]ETS 300 572 (GSM 04.90): "Digital cellular telecommunications system(Phase 2); Unstructured Supplementary Services Data (USSD) - Stage 3".[43]ETS 300 573 (GSM 05.01): "Digital cellular telecommunications system(Phase 2); Physical layer on the radio path General description".[44]ETS 300 574 (GSM 05.02): "Digital cellular telecommunications system(Phase 2); Multiplexing and multiple access on the radio path".[45]ETS 300 575 (GSM 05.03): "Digital cellular telecommunications system(Phase 2); Channel coding".[46]ETS 300 576 (GSM 05.04): "Digital cellular telecommunications system(Phase 2); Modulation".[47]ETS 300 577 (GSM 05.05): "Digital cellular telecommunications system(Phase 2); Radio transmission and reception".[48]ETS 300 578 (GSM 05.08): "Digital cellular telecommunications system(Phase 2); Radio subsystem link control".[49]ETS 300 579 (GSM 05.10): "Digital cellular telecommunications system(Phase 2); Radio subsystem synchronization".[50]ETS 300 582 (GSM 07.01): "Digital cellular telecommunications system(Phase 2); General on Terminal Adaption Functions (TAF) for Mobile Stations(MS)".SIST ETS 300 607-3 E3:2003
Page 13ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997[51]ETS 300 590 (GSM 08.08): "Digital cellular telecommunications system(Phase 2); Mobile Switching Centre - Base Station System (MSC - BSS)interface Layer 3 specification".[52]ETS 300 596 (GSM 08.58): "Digital cellular telecommunications system(Phase 2); Base Station Controller - Base Transceiver Station (BSC - BTS)interface Layer 3 specification".[53]ETS 300 599 (GSM 09.02): "Digital cellular telecommunications system(Phase 2); Mobile Application Part (MAP) specification".[54]ETS 300 607-1 (GSM 11.10-1): "Digital cellular telecommunications system(Phase 2); Mobile Station (MS) conformity specification".[55]ETS 300 607-2 (GSM 11.10-2): "Digital cellular telecommunications system(Phase 2); Mobile Station (MS) Conformance specification, ProtocolImplementation Conformance Statement (ICS) Proforma".3Definitions, symbols and abbreviations3.1DefinitionsFor the purposes of this ETS, the following definitions apply:Abstract Test Suite (ATS): Refer to ISO/IEC 9 646-1 [1].Implementation Under Test (IUT): Refer to ISO/IEC 9 646-1 [1].Partial Protocol Implementation eXtra Information for Testing (IXIT): Refer to ISO/IEC 9 646-1 [1].Point of Controls and Observations (PCO): Refer to ISO/IEC 9 646-1 [1].Protocol Implementation Conformance Statement (ICS): Refer to ISO/IEC 9 646-1 [1].System Under Test (SUT): Refer to ISO/IEC 9 646-1 [1].3.2AbbreviationsFor the purposes of this ETS, the following abbreviations apply:ATSAbstract Test SuiteBIInvalid Behaviour testsBOInopportune Behaviour testsBVValid Behaviour testsCACApability testsEDP-NEvent Detection Point - NotificationEDP-REvent Detection Point - RequestETSEuropean Telecommunication StandardFEFunctional EntityFSMFinite State MachineICSImplementation Conformance StatementIUTImplementation Under TestIXITImplementation eXtra Information for TestingPDUProtocol Data UnitSUTSystem Under TestTPTest PurposeTSSTest Suite StructureFurther abbreviations used within GSM related ETS may be found in ETR 100.Abbreviations for test case group names may be found in figure 1 and 2.SIST ETS 300 607-3 E3:2003
Page 14ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 19974Test Suite Structure (TSS)4.1Test suite naming conventionThe test group identifier for each group and subgroup is built according to the scheme in figure 1.Identifier:L3 = category:BITBIT, Basic Interconnection tests(not used)CACA, Capability tests(not used)BVBV, Valid Behaviour testsBI-BOBI and BO, Invalid and Inopportune Behaviour tests = group:INInitial testsIDIdle mode testsRRRadio Resource managementMMMobility ManagementCCCall ControlSPStructured ProceduresSSSupplementary servicesLLFLower Layer FailuresUUEUnknown, Unforeseen or erroneous Elements = group:CRChannel RequestATIMSI detach and IMSI attachSMTSequenced MM / CC message transferECEstablishment CauseIAImmediate assignmentPGTest of pagingMRTest of measurement reportASSTest of the channelHOTest of handoverFRTest of frequency redefinitionCMMTest of the channel mode modify procedureCYTest of ciphering mode settingCMTest of classmarkCHRTest of channel releaseSTARTTest of starting timeIDAUIdentification and authenticationLULocation updatingCONMM connectionCCSMOState Machine Verification, Mobile Originating CallCCSMTState Machine Verification, Mobile Terminating CallSMICFState machine verification, In Call FunctionsCRECall Re-establishmentUUSUser to user signallingUPDUnknown protocol discriminatorTISTI and skip indicatorUMTUndefined or unexpected message typeUIEUnforeseen information elements in the non-imperativeNMIENon-semantical mandatory IE errorsCNRUnknown IE, comprehension not requiredSBSpare bitsSIST ETS 300 607-3 E3:2003
Page 15ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 1997 = group:ACHandover / successful / active callCUEHandover / successful / call under establishmentFSYHandover / successful / active call / finely synchronizedPRSPre-synchronized handoversPRFProtocol failuresACCLocation updating / acceptedREJLocation updating / rejectedABNLocation updating / abnormal casesRELLocation updating / releasePERLocation updating / periodicHPERLocation updating / periodic HPLMN searchIWATLocation updating / interworking of attach and periodicESTMM connection / establishmentEXPMM connection / expiryNWABMM connection / abortion by the networkFRQPMM connection / follow-on request pendingU0Mobile Originating Call U0 StateU0.1Mobile Originating Call U0.1 MM Connection pendingU1Mobile Originating Call U1 StateU3Mobile Originating Call U3 StateU4Mobile Originating Call U4 StateU10Mobile Originating Call U10 StateU11Mobile Originating Call U11 StateU12Mobile Originating Call U12 StateU19Mobile Originating Call U19 StateU0Mobile Terminating Call U0 StateU6Mobile Terminating Call U6 StateU9Mobile Terminating Call U9 StateU7Mobile Terminating Call U7 StateU8Mobile Terminating Call U8 StateDTMFState machine verification, In Call Functions / transferCHCState machine verification, In Call Functions /TICMState machine verification, In Call Functions / in-OICMState machine verification, In Call Functions / in-Figure 1: Test group identifier naming convention scheme4.2Suite OverviewFigure 2 shows the structure of the test suites for L3.L3 ATSBVBI/OINIDRRMMCCSPSSSMSLLFUUEFigure 2: Test suite structure of the L3 tests4.3Test groups4.3.1Valid Behaviour tests (BV)Predefined state transitions are considered as valid. The test purposes in the valid behaviour testsubgroup cover the verification of the normal and exceptional procedures of the various Finite StateMachines (FSMs), i.e. a valid behaviour test is a test where the message sequence and the messagecontents are considered as valid.SIST ETS 300 607-3 E3:2003
Page 16ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 19974.3.2Invalid Behaviour/Inopportune Behaviour tests (BI-BO)This test sub group verifies that the Implementation Under Test (IUT) is able to react properly havingreceived an invalid Protocol Data Unit (PDU) or in the case an inopportune protocol event occurs. Aninvalid PDU is defined as a syntactically incorrect message. An inopportune event is syntactically correctbut occurs when it is not expected, e.g. a correctly coded operation is received in a wrong state (the IUTmay respond Error UnexpectedComponentSequence).4.4Test Step Structure4.4.1PreamblesThe preamble is defined for each test purpose.4.4.2PostamblesAfter each test case the IUT shall be brought to the state as defined in the postamble for each testpurpose.5Test Purposes (TP)For each conformance requirement a Test Purpose (TP) is defined. The test purposes are specified in theATS Dynamic part (annex A).5.1TP and test case naming conventionIn order clearly to map the conformance requirements specified in the prETS 300 607-1 and TTCN testcases in the ATS, the subclause (clause) numbers in the prETS 300 607-1 are used as test case names.The identifier of each TP is identical to the name of the implemented TTCN test case."Test Purpose Identifier" = "Test Case Name" = TPI = TC_NN_A_B_C_D_E, where NN, A, B, C, D and Eare digits used in the corresponding subclause numbers of prETS 300 607-1. For example, the test casename TC_26_5_6_2 is the TTCN specification corresponding to the conformance requirements in thesubclause 26.5.6.1.2 in the prETS 300 607-1. In case where the subclause has been implemented inmore than one test case sub numbering has been introduced. For example, the subclause 26.7.4.2.4 ofprETS 300 607-1, Location updating/rejected/national roaming testing is split into 5 test cases. Thecorresponding TCs are identified as TC_26_7_4_2_4_1, TC_26_7_4_2_4_2, TC_26_7_4_2_4_3,TC_26_7_4_2_4_4 and TC_26_7_4_2_4_5, respectively.6Abstract test method and test configurationsThe distributed test method applies to the L3 MS testing. The test method uses a lower tester and aMan-Machine Interface (MMI) as an upper tester at the SUT.SIST ETS 300 607-3 E3:2003
Page 17ETS 300 607-3 (GSM 11.10-3 version 4.17.1): May 19976.1Test system modelThe model of the L3 test system is based on the original protocol architecture at the air interface. The testsystem consists conceptually of a lower tester LT, the L3 test programme (executable test suite), a L2radio link emulator, a management functional unit, the L1 service provider and a TRx set (see figure 1).LTL2 emulatorMngtTRx setPCOL1Radio connectionSUTIUTL3L1TRxL2L3 test programmeTest systemMSTest operatorFigure 3: Test system and distributed test methodThe LT provides the test environment and for test execution and the means of control and observation atthe L3 lower service boundary within the test system.The L3 TTCN test specification uses the three LT interfaces to communicate with the MS, the systemunder test, and with the other parts of the test system:-Interf
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...