Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 5: Customer network infrastructures; Sub-part 1: Homes (single-tenant)

REN/ATTM-008

Dostop, terminali, prenos in multipleksiranje (ATTM) - Upravljanje uvajanja širokopasovnosti in življenjskega cikla virov - 5. del: Infrastruktura naročniških omrežij - 1. poddel: Hiše (enostanovanjske)

Trenutni dokument določa splošni inženiring različnih širokopasovnih infrastruktur za zagotavljanje najučinkovitejšega upravljanja z energijo (in upravljanja drugih virov) ter ustrezne ukrepe za obravnavo opreme IKT ob koncu življenjske dobe (EoL).
Trenutni dokument določa zahteve za upravljanje virov infrastrukture naročniških omrežij v hišah (enostanovanjskih), ki so prejemniki širokopasovnih storitev, kot kombinacijo naslednjega:
• Upravljanje z energijo ob ohranjanju ali celo izboljševanju ravni storitve podpirajo naslednje zahteve:
i) pri novih, prenovljenih in obstoječih stavbah: izbira opreme v prostorih stranke in povezanih virov napajanja, ki izpolnjujejo določene zahteve glede porabe energije in energetske učinkovitosti (z uporabo zunanjih virov);
ii) pri novih ali prenovljenih stavbah: zagotovitev ustreznih prostorov in poti za namestitev
kabelske infrastrukture.
• Konec življenjske dobe (EoL) opreme ICT ob upoštevanju standarda ETSI EN 305 174-8 [7].

General Information

Status
Published
Publication Date
02-Jul-2018
Current Stage
12 - Completion
Due Date
10-Jul-2018
Completion Date
03-Jul-2018
Mandate

Buy Standard

Standard
EN 305 174-5-1 V1.3.1:2018
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETSI EN 305 174-5-1 V1.3.1 (2018-07) - Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 5: Customer network infrastructures; Sub-part 1: Homes (single-tenant)
English language
35 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 305 174-5-1 V1.3.0 (2018-03) - Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 5: Customer network infrastructures; Sub-part 1: Homes (single-tenant)
English language
35 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Access, Terminals, Transmission and Multiplexing (ATTM) - Broadband Deployment and Lifecycle Resource Management - Part 5: Customer network infrastructures -
Sub-part 1: Homes (single-tenant)35.020Informacijska tehnika in tehnologija na splošnoInformation technology (IT) in general13.020.60Življenjski ciklusi izdelkovProduct life-cyclesICS:Ta slovenski standard je istoveten z:ETSI EN 305 174-5-1 V1.3.1 (2018-07)SIST EN 305 174-5-1 V1.3.1:2018en01-september-2018SIST EN 305 174-5-1 V1.3.1:2018SLOVENSKI
STANDARD



SIST EN 305 174-5-1 V1.3.1:2018



ETSI EN 305 174-5-1 V1.3.1 (2018-07) Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 5: Customer network infrastructures; Sub-part 1: Homes (single-tenant)
EUROPEAN STANDARD SIST EN 305 174-5-1 V1.3.1:2018



ETSI ETSI EN 305 174-5-1 V1.3.1 (2018-07)2
Reference REN/ATTM-008 Keywords broadband, energy management, ICT, sustainability ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETM are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM® and the GSM logo are trademarks registered and owned by the GSM Association. SIST EN 305 174-5-1 V1.3.1:2018



ETSI ETSI EN 305 174-5-1 V1.3.1 (2018-07)3 Contents Intellectual Property Rights . 7 Foreword . 7 Modal verbs terminology . 7 Introduction . 8 1 Scope . 9 2 References . 9 2.1 Normative references . 9 2.2 Informative references . 10 3 Definitions and abbreviations . 12 3.1 Definitions . 12 3.2 Abbreviations . 14 4 Homes (single-tenant) . 15 4.1 Broadband deployment to customer premises . 15 4.1.1 General . 15 4.1.2 Telecommunications services within homes . 17 5 Standardization review for homes (single-tenant) . 18 5.1 General . 18 5.2 Cabling design . 19 5.2.1 CENELEC EN 50173-4 . 19 5.2.2 CENELEC EN 50173-6 . 19 5.2.3 CENELEC EN 50491-6-1 . 20 5.3 Cabling planning and installation . 20 5.3.1 CENELEC EN 50174 series . 20 5.4 Broadband Customer Premises Equipment (CPE) . 21 5.4.1 General . 21 5.4.2 Home Gateway Initiative deliverables . 21 5.4.3 EU Codes of Conduct . 21 5.4.4 ETSI ES 202 874-1 and associated TS documents . 21 5.4.5 ETSI EN standards for measurement methods . 21 5.4.6 ETSI EN standards for Life Cycle Assessment (LCA) methods . 22 5.4.7 ETSI EN standards for End of Life (EoL) of Customer Premises Equipment (CPE) . 22 5.4.8 ITU-T standards for Universal Power Supplies . 22 6 Requirements for homes (single-tenant) . 22 6.1 General engineering to support energy management . 22 6.1.1 Design . 22 6.1.1.1 Spaces . 22 6.1.1.2 Pathways . 22 6.1.2 Operation . 23 6.2 General engineering to support interoperability . 23 6.2.1 Cabling infrastructure . 23 6.2.1.1 Requirements . 23 6.2.1.2 Recommendations . 24 6.3 Energy performance of customer premises equipment (CPE) . 24 6.3.1 General . 24 6.3.2 Categorization of Customer Premises Equipment (CPE) . 25 6.3.3 CAT 1 and CAT 2 Customer Premises Equipment (CPE). 26 6.3.3.1 CAT 1 operational states . 26 6.3.3.2 Energy consumption of CAT 1 Customer Premises Equipment . 28 6.3.3.3 CAT 2 operational states . 28 6.3.3.4 Energy consumption of CAT 2 Customer Premises Equipment . 29 6.3.4 Power supplies . 29 6.3.4.1 General . 29 SIST EN 305 174-5-1 V1.3.1:2018



ETSI ETSI EN 305 174-5-1 V1.3.1 (2018-07)4 6.3.4.2 Energy consumption of external power supplies . 30 6.4 Managing EoL of Customer Premises Equipment . 30 6.5 Eco-design aspects . 30 Annex A (informative): Generic cabling designs of CENELEC EN 50173-4 and CENELEC EN 50173-6 . 31 A.1 CENELEC EN 50173-4 . 31 A.2 CENELEC EN 50173-6 . 32 Annex B (informative): ITU-T standards for Universal Power Supplies . 33 Annex C (informative): Bibliography . 34 History . 35
SIST EN 305 174-5-1 V1.3.1:2018



ETSI ETSI EN 305 174-5-1 V1.3.1 (2018-07)5 List of figures Figure 1: Network sub-systems of fixed broadband access network infrastructure .16 Figure 2: Network access cabling and equipment .24 Figure A.1: Examples of generic cabling within the home according to CENELEC EN 50173-4 [1] .31 Figure A.2: BCT/ICT cabling topologies of CENELEC EN 50173-4 [1] .31 Figure A.3: Distributed building services cabling topologies of CENLEC EN 50173-6 [2] .32
SIST EN 305 174-5-1 V1.3.1:2018



ETSI ETSI EN 305 174-5-1 V1.3.1 (2018-07)6 List of tables Table 1: Services and applications .18 Table 2: Services and applications .27
SIST EN 305 174-5-1 V1.3.1:2018



ETSI ETSI EN 305 174-5-1 V1.3.1 (2018-07)7 Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This European Standard (EN) has been produced by ETSI Technical Committee Access, Terminals, Transmission and Multiplexing (ATTM). The present document is part 5, sub-part 1 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.25].
National transposition dates Date of adoption of this EN: 26 June 2018 Date of latest announcement of this EN (doa): 30 September 2018 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 March 2019 Date of withdrawal of any conflicting National Standard (dow): 31 March 2019
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. SIST EN 305 174-5-1 V1.3.1:2018



ETSI ETSI EN 305 174-5-1 V1.3.1 (2018-07)8 Introduction The increasing interaction between the different elements of the Information Communication Technology (ICT) sector (hardware, middleware, software and services) supports the concept of convergence in which: • multi-service packages can be delivered over a common infrastructure; • a variety of infrastructures is able to deliver these packages; • a single multi-service-package may be delivered over different infrastructures. As a result of this convergence, the development of new services, applications and content has resulted in: • an increased demand for bandwidth, reliability, quality and performance, with a consequent increase in the demand for power which has implications for cost and, in some cases, availability; • an associated continuous evolution of ICT equipment. It is therefore important to consider the environmental viability of all network elements necessary to deliver the required services in terms of the management of their operational aspects i.e. energy management (including energy efficiency) and the management of the End-of-Life (EoL) of the ICT equipment. NOTE: The term "environmental viability" is used while recognizing that well established treatments of "sustainability" feature three separate viability objectives (environmental, economic and social). For the purposes of the multi-part deliverable, only operational aspects of environmental viability are considered. A wider approach to environmental viability takes other factors into account including the use of raw materials and avoidance of hazardous substances in the construction of infrastructure or ICT equipment- these factors are not considered. New technologies and infrastructure strategies are expected to enable operators to decrease the energy consumption, for a given level of service, of their existing and future infrastructures thus decreasing their costs. This requires a common understanding among market participants that only standards can produce. The multi-part deliverable specifies the general engineering of various broadband infrastructures to enable the most effective energy management (and management of other resources) and the appropriate measures for EoL treatment of ICT equipment. Certain of the standards may specify requirements for interoperability. The present document is part 5, sub-part 1 of a multi-part deliverable and specifies requirements for customer network infrastructures within homes (single-tenant) as recipients of broadband deployment in response to the increasing amount of ICT equipment and demand for services. As energy costs in homes continues to rise, strategies are required to optimize energy consumption of all segments of ICT. The present document been produced by ETSI Technical Committees Access, Terminals, Transmission and Multiplexing (ATTM) and Cable in close collaboration with CENELEC via the Installations and Cabling Co-ordination Group (ICCG). SIST EN 305 174-5-1 V1.3.1:2018



ETSI ETSI EN 305 174-5-1 V1.3.1 (2018-07)9 1 Scope The present document specifies the general engineering of various broadband infrastructures to enable the most effective energy management (and management of other resources) and the appropriate measures for EoL treatment of ICT equipment. The present document specifies the requirements for resource management of customer network infrastructures within homes (single-tenant), as recipients of broadband services, as a combination of: • Energy management while maintaining or even improving the level of service is supported by requirements for: i) in new, refurbished and existing buildings: the selection of customer premises equipment and associated power supplies which meet specific energy consumption and energy efficiency requirements (by means of external references); ii) in new or refurbished buildings: the provision of appropriate spaces and pathways to accommodate cabling infrastructure. • EoL of ICT equipment by reference to ETSI EN 305 174-8 [7]. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https://docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. [1] CENELEC EN 50173-4:2018: "Information technology - Generic cabling systems - Part 4: Homes". [2] CENELEC EN 50173-6: "Information technology - Generic cabling systems - Part 6: Distributed building services". [3] CENELEC EN 50174-2: "Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings". [4] CENELEC EN 50491-6-1: "General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6-1: HBES installations - Installation and planning". [5] ETSI EN 301 575: "Environmental Engineering (EE); Measurement method for energy consumption of Customer Premises Equipment (CPE)". [6] ETSI EN 303 423: "Environmental Engineering (EE); Electrical and electronic household and office equipment; Measurement of networked standby power consumption of Interconnecting equipment; Harmonised Standard covering the measurement method for EC Regulation 1275/2008 amended by EU Regulation 801/2013". [7] ETSI EN 305 174-8: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 8: Management of end of life of ICT equipment (ICT waste/end of life)". SIST EN 305 174-5-1 V1.3.1:2018



ETSI ETSI EN 305 174-5-1 V1.3.1 (2018-07)10 [8] ETSI ES 202 874-1: "Access, Terminals, Transmission and Multiplexing (ATTM); External Common Power Supply for Customer Premises Network and Access Equipment; Part 1: Functional requirements". [9] ETSI ES 203 199: "Environmental Engineering (EE); Methodology for environmental Life Cycle Assessment (LCA) of Information and Communication Technology (ICT) goods, networks and services". [10] ETSI TS 102 874-2: "Access, Terminals, Transmission and Multiplexing (ATTM); External Common Power Supply for Customer Premises Network and Access Equipment; Part 2: Integrated Broadband Cable and Television Networks". [11] ETSI TS 102 874-3: "Access, Terminals, Transmission and Multiplexing (ATTM); External Common Power Supply for Customer Premises Network and Access Equipment; Part 3: CPS Type 1 implementation details". [12] ETSI TS 102 874-4: "Access, Terminals, Transmission and Multiplexing (ATTM); External Common Power Supply for Customer Premises Network and Access Equipment; Part 4: CPS Type 2.b implementation details". [13] ETSI TS 102 874-5: "Access, Terminals, Transmission and Multiplexing (ATTM); External Common Power Supply for Customer Premises Network and Access Equipment; Part 5: CPS Type 2.c implementation details". [14] ETSI TS 102 874-6: "Access, Terminals, Transmission and Multiplexing (ATTM); External Common Power Supply for Customer Premises Network and Access Equipment; Part 6: CPS Type 2.d implementation details". [15] EU Code of Conduct on Energy Efficiency of External Power Supplies - Version 5. NOTE: Available at https://e3p.jrc.ec.europa.eu/sites/default/files/documents/publications/code_of_conduct_for_eps_version_5_-_final.pdf. [16] EU Code of Conduct on Energy Consumption of Broadband Equipment - Version 6. NOTE: Available at http://publications.jrc.ec.europa.eu/repository/bitstream/JRC106039/ictcoc-ecbe-v6_feb_2017_final.pdf. [17] EU Code of Conduct on Energy Efficiency for Digital TV Services Systems - Version 9. NOTE: Available at https://e3p.jrc.ec.europa.eu/sites/default/files/documents/publications/code_of_conduct_digital_tv_service_systems_v9_final.pdf. [18] IEEE Std 802.3™: "IEEE Standard for Ethernet". 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Void. [i.2] CENELEC EN 50174-1: "Information technology - Cabling installation: Installation specification and quality assurance". SIST EN 305 174-5-1 V1.3.1:2018



ETSI ETSI EN 305 174-5-1 V1.3.1 (2018-07)11 [i.3] CENELEC EN 50174-3: "Information technology - Cabling installation: Installation planning and practices outside buildings". [i.4] CENELEC EN 50491 series: "General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)". [i.5] CENELEC EN 60603-7 series: "Connectors for electronic equipment". [i.6] Commission Regulation (EC) No 278/2009 of 6 April 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for no-load condition electric power consumption and average active efficiency of external power supplies. [i.7] Commission Regulation (EC) No 642/2009 with regard to ecodesign requirements for televisions. NOTE: Commission Regulation (EC) No 642/2009 is subsequently amended by Commission Regulation (EU) 2016/2282 with regard to the use of tolerances in verification procedures. [i.8] Commission Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment. NOTE: Commission Regulation (EC) No 1275/2008 is subsequently amended by Commission Regulation (EU) 2016/2282 with regard to the use of tolerances in verification procedures. [i.9] Commission Regulation (EU) No 801/2013 of 22 August 2013 amending Commission Regulation (EC) No 1275/2008 and Regulation (EC) No 642/2009 by introducing requirements for networked standby. [i.10] ETSI TS 102 973: "Access Terminals, Transmission and Multiplexing (ATTM); Network Termination (NT) in Next Generation Network architectures". [i.11] ETSI TS 103 247: "Access, Terminals, Transmission and Multiplexing (ATTM); Singlemode Optical Fibre System Specifications for Home Cabling". [i.12] ETSI TS 105 175-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Plastic Optical Fibre System Specifications for 100 Mbit/s and 1 Gbit/s". [i.13] ETSI EN 305 174-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 2: ICT Sites". [i.14] ETSI EN 305 200 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs". [i.15] ISO 14040: "Environmental management -- Life cycle assessment -- Principles and framework". [i.16] ISO/IEC 11801-4: "Information technology - Generic cabling for customer premises: Part 4: Homes". [i.17] ISO/IEC 11801-6: "Information technology - Generic cabling for customer premises: Part 6: Distributed building services". [i.18] Recommendation ITU-T L.113: "Vocabulary of terms for broadband aspects of ISDN". [i.19] Recommendation ITU-T L.1000: "Universal power adapter and charger solution for mobile terminals and other hand-held ICT devices". [i.20] Recommendation ITU-T L.1001: "External universal power adapter solutions for stationary information and communication technology devices". [i.21] Recommendation ITU-T L.1002: "External universal power adapter solutions for portable information and communication technology devices". [i.22] Recommendation ITU-T L.1005: "Test suites for assessment of the universal charger solution". [i.23] Recommendation ITU-T L.1006: "Test suites for assessment of the external universal power adapter solutions for stationary information and communication technology devices". [i.24] Home Gateway Initiative HGI-GD035: "HGI Smart Home Use Cases". SIST EN 305 174-5-1 V1.3.1:2018



ETSI ETSI EN 305 174-5-1 V1.3.1 (2018-07)12 [i.25] ETSI EN 305 174-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment and Lifecycle Resource Management; Part 1: Overview, common and generic aspects". [i.26] ISO/IEC 15018: "Information technology -- Generic cabling for homes". [i.27] ETSI TR 105 174-4: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband Deployment - Energy Efficiency and Key Performance Indicators; Part 4: Access networks". [i.28] Guide for the EMC Directive 2004/108/EC. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: access network: functional elements (that is equipment and infrastructure) that enable communication between an operator site (OS) and a customer network access provider: operator or other entity providing the means to enable external telecommunications service provision to a subscriber NOTE: Source: CENELEC EN 50174-3:2013 [i.3], clause 3.1.2. application: system, with its associated transmission and power feeding method that is supported by telecommunications cabling NOTE: This corresponds to a Layer One application in the OSI 7-layer model. bro
...

ETSI EN 305 174-5-1 V1.3.1 (2018-07)






EUROPEAN STANDARD
Access, Terminals, Transmission and Multiplexing (ATTM);
Broadband Deployment and Lifecycle Resource Management;
Part 5: Customer network infrastructures;
Sub-part 1: Homes (single-tenant)

---------------------- Page: 1 ----------------------
2 ETSI EN 305 174-5-1 V1.3.1 (2018-07)



Reference
REN/ATTM-008
Keywords
broadband, energy management, ICT,
sustainability

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 305 174-5-1 V1.3.1 (2018-07)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 10
3 Definitions and abbreviations . 12
3.1 Definitions . 12
3.2 Abbreviations . 14
4 Homes (single-tenant) . 15
4.1 Broadband deployment to customer premises . 15
4.1.1 General . 15
4.1.2 Telecommunications services within homes . 17
5 Standardization review for homes (single-tenant) . 18
5.1 General . 18
5.2 Cabling design . 19
5.2.1 CENELEC EN 50173-4 . 19
5.2.2 CENELEC EN 50173-6 . 19
5.2.3 CENELEC EN 50491-6-1 . 20
5.3 Cabling planning and installation . 20
5.3.1 CENELEC EN 50174 series . 20
5.4 Broadband Customer Premises Equipment (CPE) . 21
5.4.1 General . 21
5.4.2 Home Gateway Initiative deliverables . 21
5.4.3 EU Codes of Conduct . 21
5.4.4 ETSI ES 202 874-1 and associated TS documents . 21
5.4.5 ETSI EN standards for measurement methods . 21
5.4.6 ETSI EN standards for Life Cycle Assessment (LCA) methods . 22
5.4.7 ETSI EN standards for End of Life (EoL) of Customer Premises Equipment (CPE) . 22
5.4.8 ITU-T standards for Universal Power Supplies . 22
6 Requirements for homes (single-tenant) . 22
6.1 General engineering to support energy management . 22
6.1.1 Design . 22
6.1.1.1 Spaces . 22
6.1.1.2 Pathways . 22
6.1.2 Operation . 23
6.2 General engineering to support interoperability . 23
6.2.1 Cabling infrastructure . 23
6.2.1.1 Requirements . 23
6.2.1.2 Recommendations . 24
6.3 Energy performance of customer premises equipment (CPE) . 24
6.3.1 General . 24
6.3.2 Categorization of Customer Premises Equipment (CPE) . 25
6.3.3 CAT 1 and CAT 2 Customer Premises Equipment (CPE). 26
6.3.3.1 CAT 1 operational states . 26
6.3.3.2 Energy consumption of CAT 1 Customer Premises Equipment . 28
6.3.3.3 CAT 2 operational states . 28
6.3.3.4 Energy consumption of CAT 2 Customer Premises Equipment . 29
6.3.4 Power supplies . 29
6.3.4.1 General . 29
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 305 174-5-1 V1.3.1 (2018-07)
6.3.4.2 Energy consumption of external power supplies . 30
6.4 Managing EoL of Customer Premises Equipment . 30
6.5 Eco-design aspects . 30
Annex A (informative): Generic cabling designs of CENELEC EN 50173-4 and CENELEC
EN 50173-6 . 31
A.1 CENELEC EN 50173-4 . 31
A.2 CENELEC EN 50173-6 . 32
Annex B (informative): ITU-T standards for Universal Power Supplies . 33
Annex C (informative): Bibliography . 34
History . 35


ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 305 174-5-1 V1.3.1 (2018-07)
List of figures
Figure 1: Network sub-systems of fixed broadband access network infrastructure .16
Figure 2: Network access cabling and equipment .24
Figure A.1: Examples of generic cabling within the home according to CENELEC EN 50173-4 [1] .31
Figure A.2: BCT/ICT cabling topologies of CENELEC EN 50173-4 [1] .31
Figure A.3: Distributed building services cabling topologies of CENLEC EN 50173-6 [2] .32


ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 305 174-5-1 V1.3.1 (2018-07)
List of tables
Table 1: Services and applications .18
Table 2: Services and applications .27


ETSI

---------------------- Page: 6 ----------------------
7 ETSI EN 305 174-5-1 V1.3.1 (2018-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Access, Terminals, Transmission and
Multiplexing (ATTM).
The present document is part 5, sub-part 1 of a multi-part deliverable. Full details of the entire series can be found in
part 1 [i.25].

National transposition dates
Date of adoption of this EN: 26 June 2018
Date of latest announcement of this EN (doa): 30 September 2018
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2019
Date of withdrawal of any conflicting National Standard (dow): 31 March 2019

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 7 ----------------------
8 ETSI EN 305 174-5-1 V1.3.1 (2018-07)
Introduction
The increasing interaction between the different elements of the Information Communication Technology (ICT) sector
(hardware, middleware, software and services) supports the concept of convergence in which:
• multi-service packages can be delivered over a common infrastructure;
• a variety of infrastructures is able to deliver these packages;
• a single multi-service-package may be delivered over different infrastructures.
As a result of this convergence, the development of new services, applications and content has resulted in:
• an increased demand for bandwidth, reliability, quality and performance, with a consequent increase in the
demand for power which has implications for cost and, in some cases, availability;
• an associated continuous evolution of ICT equipment.
It is therefore important to consider the environmental viability of all network elements necessary to deliver the required
services in terms of the management of their operational aspects i.e. energy management (including energy efficiency)
and the management of the End-of-Life (EoL) of the ICT equipment.
NOTE: The term "environmental viability" is used while recognizing that well established treatments of
"sustainability" feature three separate viability objectives (environmental, economic and social). For the
purposes of the multi-part deliverable, only operational aspects of environmental viability are considered.
A wider approach to environmental viability takes other factors into account including the use of raw
materials and avoidance of hazardous substances in the construction of infrastructure or ICT equipment-
these factors are not considered.
New technologies and infrastructure strategies are expected to enable operators to decrease the energy consumption, for
a given level of service, of their existing and future infrastructures thus decreasing their costs. This requires a common
understanding among market participants that only standards can produce.
The multi-part deliverable specifies the general engineering of various broadband infrastructures to enable the most
effective energy management (and management of other resources) and the appropriate measures for EoL treatment of
ICT equipment. Certain of the standards may specify requirements for interoperability.
The present document is part 5, sub-part 1 of a multi-part deliverable and specifies requirements for customer network
infrastructures within homes (single-tenant) as recipients of broadband deployment in response to the increasing amount
of ICT equipment and demand for services. As energy costs in homes continues to rise, strategies are required to
optimize energy consumption of all segments of ICT.
The present document been produced by ETSI Technical Committees Access, Terminals, Transmission and
Multiplexing (ATTM) and Cable in close collaboration with CENELEC via the Installations and Cabling Co-ordination
Group (ICCG).
ETSI

---------------------- Page: 8 ----------------------
9 ETSI EN 305 174-5-1 V1.3.1 (2018-07)
1 Scope
The present document specifies the general engineering of various broadband infrastructures to enable the most
effective energy management (and management of other resources) and the appropriate measures for EoL treatment of
ICT equipment.
The present document specifies the requirements for resource management of customer network infrastructures within
homes (single-tenant), as recipients of broadband services, as a combination of:
• Energy management while maintaining or even improving the level of service is supported by requirements
for:
i) in new, refurbished and existing buildings: the selection of customer premises equipment and associated
power supplies which meet specific energy consumption and energy efficiency requirements (by means
of external references);
ii) in new or refurbished buildings: the provision of appropriate spaces and pathways to accommodate
cabling infrastructure.
• EoL of ICT equipment by reference to ETSI EN 305 174-8 [7].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] CENELEC EN 50173-4:2018: "Information technology - Generic cabling systems - Part 4:
Homes".
[2] CENELEC EN 50173-6: "Information technology - Generic cabling systems - Part 6: Distributed
building services".
[3] CENELEC EN 50174-2: "Information technology - Cabling installation - Part 2: Installation
planning and practices inside buildings".
[4] CENELEC EN 50491-6-1: "General requirements for Home and Building Electronic Systems
(HBES) and Building Automation and Control Systems (BACS) - Part 6-1: HBES installations -
Installation and planning".
[5] ETSI EN 301 575: "Environmental Engineering (EE); Measurement method for energy
consumption of Customer Premises Equipment (CPE)".
[6] ETSI EN 303 423: "Environmental Engineering (EE); Electrical and electronic household and
office equipment; Measurement of networked standby power consumption of Interconnecting
equipment; Harmonised Standard covering the measurement method for EC Regulation 1275/2008
amended by EU Regulation 801/2013".
[7] ETSI EN 305 174-8: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband
Deployment and Lifecycle Resource Management; Part 8: Management of end of life of ICT
equipment (ICT waste/end of life)".
ETSI

---------------------- Page: 9 ----------------------
10 ETSI EN 305 174-5-1 V1.3.1 (2018-07)
[8] ETSI ES 202 874-1: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment; Part 1:
Functional requirements".
[9] ETSI ES 203 199: "Environmental Engineering (EE); Methodology for environmental Life Cycle
Assessment (LCA) of Information and Communication Technology (ICT) goods, networks and
services".
[10] ETSI TS 102 874-2: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment; Part 2: Integrated
Broadband Cable and Television Networks".
[11] ETSI TS 102 874-3: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment; Part 3: CPS
Type 1 implementation details".
[12] ETSI TS 102 874-4: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment; Part 4: CPS
Type 2.b implementation details".
[13] ETSI TS 102 874-5: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment; Part 5: CPS
Type 2.c implementation details".
[14] ETSI TS 102 874-6: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment; Part 6: CPS
Type 2.d implementation details".
[15] EU Code of Conduct on Energy Efficiency of External Power Supplies - Version 5.
NOTE: Available at
https://e3p.jrc.ec.europa.eu/sites/default/files/documents/publications/code_of_conduct_for_eps_version_
5_-_final.pdf.
[16] EU Code of Conduct on Energy Consumption of Broadband Equipment - Version 6.
NOTE: Available at http://publications.jrc.ec.europa.eu/repository/bitstream/JRC106039/ictcoc-ecbe-
v6_feb_2017_final.pdf.
[17] EU Code of Conduct on Energy Efficiency for Digital TV Services Systems - Version 9.
NOTE: Available at
https://e3p.jrc.ec.europa.eu/sites/default/files/documents/publications/code_of_conduct_digital_tv_servic
e_systems_v9_final.pdf.
[18] IEEE Std 802.3™: "IEEE Standard for Ethernet".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Void.
[i.2] CENELEC EN 50174-1: "Information technology - Cabling installation: Installation specification
and quality assurance".
ETSI

---------------------- Page: 10 ----------------------
11 ETSI EN 305 174-5-1 V1.3.1 (2018-07)
[i.3] CENELEC EN 50174-3: "Information technology - Cabling installation: Installation planning and
practices outside buildings".
[i.4] CENELEC EN 50491 series: "General requirements for Home and Building Electronic Systems
(HBES) and Building Automation and Control Systems (BACS)".
[i.5] CENELEC EN 60603-7 series: "Connectors for electronic equipment".
[i.6] Commission Regulation (EC) No 278/2009 of 6 April 2009 implementing Directive 2005/32/EC
of the European Parliament and of the Council with regard to ecodesign requirements for no-load
condition electric power consumption and average active efficiency of external power supplies.
[i.7] Commission Regulation (EC) No 642/2009 with regard to ecodesign requirements for televisions.
NOTE: Commission Regulation (EC) No 642/2009 is subsequently amended by Commission Regulation (EU)
2016/2282 with regard to the use of tolerances in verification procedures.
[i.8] Commission Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby,
off mode electric power consumption of electrical and electronic household and office equipment.
NOTE: Commission Regulation (EC) No 1275/2008 is subsequently amended by Commission Regulation (EU)
2016/2282 with regard to the use of tolerances in verification procedures.
[i.9] Commission Regulation (EU) No 801/2013 of 22 August 2013 amending Commission Regulation
(EC) No 1275/2008 and Regulation (EC) No 642/2009 by introducing requirements for networked
standby.
[i.10] ETSI TS 102 973: "Access Terminals, Transmission and Multiplexing (ATTM); Network
Termination (NT) in Next Generation Network architectures".
[i.11] ETSI TS 103 247: "Access, Terminals, Transmission and Multiplexing (ATTM); Singlemode
Optical Fibre System Specifications for Home Cabling".
[i.12] ETSI TS 105 175-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Plastic Optical
Fibre System Specifications for 100 Mbit/s and 1 Gbit/s".
[i.13] ETSI EN 305 174-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband
Deployment and Lifecycle Resource Management; Part 2: ICT Sites".
[i.14] ETSI EN 305 200 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs".
[i.15] ISO 14040: "Environmental management -- Life cycle assessment -- Principles and framework".
[i.16] ISO/IEC 11801-4: "Information technology - Generic cabling for customer premises: Part 4:
Homes".
[i.17] ISO/IEC 11801-6: "Information technology - Generic cabling for customer premises: Part 6:
Distributed building services".
[i.18] Recommendation ITU-T L.113: "Vocabulary of terms for broadband aspects of ISDN".
[i.19] Recommendation ITU-T L.1000: "Universal power adapter and charger solution for mobile
terminals and other hand-held ICT devices".
[i.20] Recommendation ITU-T L.1001: "External universal power adapter solutions for stationary
information and communication technology devices".
[i.21] Recommendation ITU-T L.1002: "External universal power adapter solutions for portable
information and communication technology devices".
[i.22] Recommendation ITU-T L.1005: "Test suites for assessment of the universal charger solution".
[i.23] Recommendation ITU-T L.1006: "Test suites for assessment of the external universal power
adapter solutions for stationary information and communication technology devices".
[i.24] Home Gateway Initiative HGI-GD035: "HGI Smart Home Use Cases".
ETSI

---------------------- Page: 11 ----------------------
12 ETSI EN 305 174-5-1 V1.3.1 (2018-07)
[i.25] ETSI EN 305 174-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband
Deployment and Lifecycle Resource Management; Part 1: Overview, common and generic
aspects".
[i.26] ISO/IEC 15018: "Information technology -- Generic cabling for homes".
[i.27] ETSI TR 105 174-4: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband
Deployment - Energy Efficiency and Key Performance Indicators; Part 4: Access networks".
[i.28] Guide for the EMC Directive 2004/108/EC.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
access network: functional elements (that is equipment and infrastructure) that enable communication between an
operator site (OS) and a customer network
access provider: operator or other entity providing the means to enable external telecommunications service provision
to a subscriber
NOTE: Source: CENELEC EN 50174-3:2013 [i.3], clause 3.1.2.
application: system, with its associated transmission and power feeding method that is supported by
telecommunications cabling
NOTE: This corresponds to a Layer One application in the OSI 7-layer model.
broadband: tele
...

Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)






EUROPEAN STANDARD
Access, Terminals, Transmission and Multiplexing (ATTM);
Broadband Deployment and Lifecycle Resource Management;
Part 5: Customer network infrastructures;
Sub-part 1: Homes (single-tenant)

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)




Reference
REN/ATTM-008
Keywords
broadband, energy management, ICT,
sustainability

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)

Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 10
3 Definitions and abbreviations . 12
3.1 Definitions . 12
3.2 Abbreviations . 14
4 Homes (single-tenant) . 15
4.1 Broadband deployment to customer premises . 15
4.1.1 General . 15
4.1.2 Telecommunications services within homes . 17
5 Standardization review for homes (single-tenant) . 18
5.1 General . 18
5.2 Cabling design . 19
5.2.1 CENELEC EN 50173-4 . 19
5.2.2 CENELEC EN 50173-6 . 19
5.2.3 CENELEC EN 50491-6-1 . 20
5.3 Cabling planning and installation . 20
5.3.1 CENELEC EN 50174 series . 20
5.4 Broadband Customer Premises Equipment (CPE) . 21
5.4.1 General . 21
5.4.2 Home Gateway Initiative deliverables . 21
5.4.3 EU Codes of Conduct . 21
5.4.4 ETSI ES 202 874-1 and associated TS documents . 21
5.4.5 ETSI EN standards for measurement methods . 21
5.4.6 ETSI EN standards for Life Cycle Assessment (LCA) methods . 22
5.4.7 ETSI EN standards for End of Life (EoL) of Customer Premises Equipment (CPE) . 22
5.4.8 ITU-T standards for Universal Power Supplies . 22
6 Requirements for homes (single-tenant) . 22
6.1 General engineering to support energy management . 22
6.1.1 Design . 22
6.1.1.1 Spaces . 22
6.1.1.2 Pathways . 22
6.1.2 Operation . 23
6.2 General engineering to support interoperability . 23
6.2.1 Cabling infrastructure . 23
6.2.1.1 Requirements . 23
6.2.1.2 Recommendations . 24
6.3 Energy performance of customer premises equipment (CPE) . 24
6.3.1 General . 24
6.3.2 Categorization of Customer Premises Equipment (CPE) . 25
6.3.3 CAT 1 and CAT 2 Customer Premises Equipment (CPE). 26
6.3.3.1 CAT 1 operational states . 26
6.3.3.2 Energy consumption of CAT 1 Customer Premises Equipment . 28
6.3.3.3 CAT 2 operational states . 28
6.3.3.4 Energy consumption of CAT 2 Customer Premises Equipment . 29
6.3.4 Power supplies . 29
6.3.4.1 General . 29
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)

6.3.4.2 Energy consumption of external power supplies . 30
6.4 Managing EoL of Customer Premises Equipment . 30
6.5 Eco-design aspects . 30
Annex A (informative): Generic cabling designs of CENELEC EN 50173-4 and CENELEC
EN 50173-6 . 31
A.1 CENELEC EN 50173-4 . 31
A.2 CENELEC EN 50173-6 . 32
Annex B (informative): ITU-T standards for Universal Power Supplies . 33
Annex C (informative): Bibliography . 34
History . 35


ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)

List of figures
Figure 1: Network sub-systems of fixed broadband access network infrastructure .16
Figure 2: Network access cabling and equipment .24
Figure A.1: Examples of generic cabling within the home according to CENELEC EN 50173-4 [1] .31
Figure A.2: BCT/ICT cabling topologies of CENELEC EN 50173-4 [1] .31
Figure A.3: Distributed building services cabling topologies of CENLEC EN 50173-6 [2] .32


ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)

List of tables
Table 1: Services and applications .18
Table 2: Services and applications .27


ETSI

---------------------- Page: 6 ----------------------
7 Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)

Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Access, Terminals, Transmission
and Multiplexing (ATTM), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI
standards EN Approval Procedure.
The present document is part 1 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.25].

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 7 ----------------------
8 Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)

Introduction
The increasing interaction between the different elements of the Information Communication Technology (ICT) sector
(hardware, middleware, software and services) supports the concept of convergence in which:
• multi-service packages can be delivered over a common infrastructure;
• a variety of infrastructures is able to deliver these packages;
• a single multi-service-package may be delivered over different infrastructures.
As a result of this convergence, the development of new services, applications and content has resulted in:
• an increased demand for bandwidth, reliability, quality and performance, with a consequent increase in the
demand for power which has implications for cost and, in some cases, availability;
• an associated continuous evolution of ICT equipment.
It is therefore important to consider the environmental viability of all network elements necessary to deliver the required
services in terms of the management of their operational aspects i.e. energy management (including energy efficiency)
and the management of the End-of-Life (EoL) of the ICT equipment.
NOTE: The term "environmental viability" is used while recognizing that well established treatments of
"sustainability" feature three separate viability objectives (environmental, economic and social). For the
purposes of the multi-part deliverable, only operational aspects of environmental viability are considered.
A wider approach to environmental viability takes other factors into account including the use of raw
materials and avoidance of hazardous substances in the construction of infrastructure or ICT equipment-
these factors are not considered.
New technologies and infrastructure strategies are expected to enable operators to decrease the energy consumption, for
a given level of service, of their existing and future infrastructures thus decreasing their costs. This requires a common
understanding among market participants that only standards can produce.
The multi-part deliverable specifies the general engineering of various broadband infrastructures to enable the most
effective energy management (and management of other resources) and the appropriate measures for EoL treatment of
ICT equipment. Certain of the standards may specify requirements for interoperability.
The present document is part 5, sub-part 1 of a multi-part deliverable and specifies requirements for customer network
infrastructures within homes (single-tenant) as recipients of broadband deployment in response to the increasing amount
of ICT equipment and demand for services. As energy costs in homes continues to rise, strategies are required to
optimize energy consumption of all segments of ICT.
The present document been produced by ETSI Technical Committees Access, Terminals, Transmission and
Multiplexing (ATTM) and Cable in close collaboration with CENELEC via the Installations and Cabling Co-ordination
Group (ICCG).
ETSI

---------------------- Page: 8 ----------------------
9 Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)

1 Scope
The present document specifies the general engineering of various broadband infrastructures to enable the most
effective energy management (and management of other resources) and the appropriate measures for EoL treatment of
ICT equipment.
The present document specifies the requirements for resource management of customer network infrastructures within
homes (single-tenant), as recipients of broadband services, as a combination of:
• Energy management while maintaining or even improving the level of service is supported by requirements
for:
i) in new, refurbished and existing buildings: the selection of customer premises equipment and associated
power supplies which meet specific energy consumption and energy efficiency requirements (by means
of external references);
ii) in new or refurbished buildings: the provision of appropriate spaces and pathways to accommodate
cabling infrastructure.
• EoL of ICT equipment by reference to ETSI EN 305 174-8 [7].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] CENELEC EN 50173-4:2018: "Information technology - Generic cabling systems -
Part 4: Homes".
[2] CENELEC EN 50173-6: "Information technology - Generic cabling systems - Part 6: Distributed
building services".
[3] CENELEC EN 50174-2: "Information technology - Cabling installation - Part 2: Installation
planning and practices inside buildings".
[4] CENELEC EN 50491-6-1: "General requirements for Home and Building Electronic Systems
(HBES) and Building Automation and Control Systems (BACS) - Part 6-1: HBES installations -
Installation and planning".
[5] ETSI EN 301 575: "Environmental Engineering (EE); Measurement method for energy
consumption of Customer Premises Equipment (CPE)".
[6] ETSI EN 303 423: "Environmental Engineering (EE); Electrical and electronic household and
office equipment; Measurement of networked standby power consumption of Interconnecting
equipment; Harmonised Standard covering the measurement method for EC Regulation 1275/2008
amended by EU Regulation 801/2013".
[7] ETSI EN 305 174-8: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband
Deployment and Lifecycle Resource Management; Part 8: Management of end of life of ICT
equipment (ICT waste/end of life)".
ETSI

---------------------- Page: 9 ----------------------
10 Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)

[8] ETSI ES 202 874-1: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment;
Part 1: Functional requirements".
[9] ETSI ES 203 199: "Environmental Engineering (EE); Methodology for environmental Life Cycle
Assessment (LCA) of Information and Communication Technology (ICT) goods, networks and
services".
[10] ETSI TS 102 874-2: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment; Part 2: Integrated
Broadband Cable and Television Networks".
[11] ETSI TS 102 874-3: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment; Part 3: CPS
Type 1 implementation details".
[12] ETSI TS 102 874-4: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment; Part 4: CPS
Type 2.b implementation details".
[13] ETSI TS 102 874-5: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment; Part 5: CPS
Type 2.c implementation details".
[14] ETSI TS 102 874-6: "Access, Terminals, Transmission and Multiplexing (ATTM); External
Common Power Supply for Customer Premises Network and Access Equipment; Part 6: CPS
Type 2.d implementation details".
[15] EU Code of Conduct on Energy Efficiency of External Power Supplies - Version 5.
NOTE: Available at
https://e3p.jrc.ec.europa.eu/sites/default/files/documents/publications/code_of_conduct_for_eps_version_
5_-_final.pdf.
[16] EU Code of Conduct on Energy Consumption of Broadband Equipment - Version 6.
NOTE: Available at http://publications.jrc.ec.europa.eu/repository/bitstream/JRC106039/ictcoc-ecbe-
v6_feb_2017_final.pdf.
[17] EU Code of Conduct on Energy Efficiency for Digital TV Services Systems - Version 9.
NOTE: Available at
https://e3p.jrc.ec.europa.eu/sites/default/files/documents/publications/code_of_conduct_digital_tv_servic
e_systems_v9_final.pdf.
[18] IEEE Std 802.3™: "IEEE Standard for Ethernet".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Void.
[i.2] CENELEC EN 50174-1: "Information technology - Cabling installation: Installation specification
and quality assurance".
ETSI

---------------------- Page: 10 ----------------------
11 Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)

[i.3] CENELEC EN 50174-3: "Information technology - Cabling installation: Installation planning and
practices outside buildings".
[i.4] CENELEC EN 50491 series: "General requirements for Home and Building Electronic Systems
(HBES) and Building Automation and Control Systems (BACS)".
[i.5] CENELEC EN 60603-7 series: "Connectors for electronic equipment".
[i.6] Commission Regulation (EC) No 278/2009 of 6 April 2009 implementing Directive 2005/32/EC
of the European Parliament and of the Council with regard to ecodesign requirements for no-load
condition electric power consumption and average active efficiency of external power supplies.
[i.7] Commission Regulation (EC) No 642/2009 with regard to ecodesign requirements for televisions.
NOTE: Commission Regulation (EC) No 642/2009 is subsequently amended by Commission Regulation (EU)
2016/2282 with regard to the use of tolerances in verification procedures.
[i.8] Commission Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby,
off mode electric power consumption of electrical and electronic household and office equipment.
NOTE: Commission Regulation (EC) No 1275/2008 is subsequently amended by Commission Regulation (EU)
2016/2282 with regard to the use of tolerances in verification procedures.
[i.9] Commission Regulation (EU) No 801/2013 of 22 August 2013 amending Commission Regulation
(EC) No 1275/2008 and Regulation (EC) No 642/2009 by introducing requirements for networked
standby.
[i.10] ETSI TS 102 973: "Access Terminals, Transmission and Multiplexing (ATTM); Network
Termination (NT) in Next Generation Network architectures".
[i.11] ETSI TS 103 247: "Access, Terminals, Transmission and Multiplexing (ATTM); Singlemode
Optical Fibre System Specifications for Home Cabling".
[i.12] ETSI TS 105 175-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Plastic Optical
Fibre System Specifications for 100 Mbit/s and 1 Gbit/s".
[i.13] ETSI EN 305 174-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband
Deployment and Lifecycle Resource Management; Part 2: ICT Sites".
[i.14] ETSI EN 305 200 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs".
[i.15] ISO 14040: "Environmental management -- Life cycle assessment -- Principles and framework".
[i.16] ISO/IEC 11801-4: "Information technology - Generic cabling for customer premises: Part 4:
Homes".
[i.17] ISO/IEC 11801-6: "Information technology - Generic cabling for customer premises: Part 6:
Distributed building services".
[i.18] Recommendation ITU-T L.113: "Vocabulary of terms for broadband aspects of ISDN".
[i.19] Recommendation ITU-T L.1000: "Universal power adapter and charger solution for mobile
terminals and other hand-held ICT devices".
[i.20] Recommendation ITU-T L.1001: "External universal power adapter solutions for stationary
information and communication technology devices".
[i.21] Recommendation ITU-T L.1002: "External universal power adapter solutions for portable
information and communication technology devices".
[i.22] Recommendation ITU-T L.1005: "Test suites for assessment of the universal charger solution".
[i.23] Recommendation ITU-T L.1006: "Test suites for assessment of the external universal power
adapter solutions for stationary information and communication technology devices".
[i.24] Home Gateway Initiative HGI-GD035: "HGI Smart Home Use Cases".
ETSI

---------------------- Page: 11 ----------------------
12 Draft ETSI EN 305 174-5-1 V1.3.0 (2018-03)

[i.25] ETSI EN 305 174-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband
Deployment and Lifecycle Resource Management; Part 1: Overview, common and generic
aspects".
[i.26] ISO/IEC 15018: "Information technology -- Generic cabling for homes".
[i.27] ETSI TR 105 174-4: "Access, Terminals, Transmission and Multiplexing (ATTM); Broadband
Deployment - Energy Efficiency and Key Performance Indicators; Part 4: Access networks".
[i.28] Guide for the EMC Directive 2004/108/EC.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
access network: functional elements (that is equipment and infrastructure) that enable communication between an
operator site (OS) and a customer network
access provider: operator or other entity providing the means to enable external telecommunications service provision
to a subscriber
NOTE: Source: CENELEC EN 50174-3:2013 [i.3], clause 3.1.2.
application: system, with it
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.