ETSI SR 000 314 V2.32.1 (2022-11)

Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards

RSR/BOARD-00035

General Information

• Status: Not Published
• Technical Committee: BOARD - Board
• Current Stage: 50 - Withdrawn
• Completion Date: 16-Mar-2023

Standards Content (Sample)

ETSI SR 000 314 V2.32.1 (2022-11)






SPECIAL REPORT
Intellectual Property Rights (IPRs);
Essential, or potentially Essential, IPRs notified
to ETSI in respect of ETSI standards



---------------------- Page: 1 ----------------------
2 ETSI SR 000 314 V2.32.1 (2022-11)

Reference
RSR/BOARD-00035
Keywords
IPR

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
and/or governmental
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2022.
All rights reserved.

ETSI

---------------------- Page: 2 ----------------------
3 ETSI SR 000 314 V2.32.1 (2022-11)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definition of terms, symbols and abbreviations . 6
3.1 Terms . 6
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Notified IPRs . 12
4.1 Notifications . 12
4.1.1 List of Project Names used in the ETSI IPR Database . 12
4.2 Void . 13
4.3 Void . 13
Annex A: How to consult the Excel file in the zip attachment . 14
History . 17

ETSI

---------------------- Page: 3 ----------------------
4 ETSI SR 000 314 V2.32.1 (2022-11)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
The present document identifies IPRs, particularly patents and patent applications, which have been notified to ETSI as
being Essential, or Potentially Essential, to ETSI Standards or Technical Specifications.
The present document has been prepared on the basis of information received. ETSI has not checked the validity of the
information, nor the relevance of the identified patents/patent applications to the ETSI standards and cannot confirm, or
deny, that the patents/patent applications are, in fact, essential, or potentially Essential. No investigation, or IPR
searches, have been carried out by ETSI and therefore no guarantee can be given concerning the existence of other IPRs
which are, or may become, essential.
It should also be noted that whilst ETSI members are not obliged to conduct IPR searches they are obliged to make
reasonable efforts to inform ETSI of any Essential IPRs of which they become aware (see article 4 of the ETSI IPR
Policy [i.1]).
The present document will be maintained by the ETSI Secretariat and further editions will be issued as, and when,
necessary. Any errors in the information contained in the present document, or any additional information concerning
Essential IPRs, of which readers of the present document become aware, should be notified to the ETSI Secretariat (for
the attention of the Legal Service).
NOTE: The present document is also available at https://www.etsi.org/intellectual-property-rights [i.4].
Modal verbs terminology
In the present document "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be
interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 4 ----------------------
5 ETSI SR 000 314 V2.32.1 (2022-11)
1 Scope
The present document identifies IPRs, particularly patents and patent applications, which have been notified to ETSI as
being Essential, or potentially Essential, to ETSI Standards or Technical Specifications.
Unless otherwise specified, all IPRs included into the present document have been notified to ETSI, with an
undertaking from the owner to grant licences according to the terms and conditions of article 6.1 of the ETSI IPR
Policy [i.1], Annex 6 of the ETSI Rules of Procedure [i.3].
2 References
2.1 Normative references
Normative references are not applicable in the present document.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI IPR Policy.
NOTE: The ETSI IPR Policy can be found at https://portal.etsi.org/Resources/ETSI-Directives.
[i.2] ETSI Guide on IPRs.
NOTE: The ETSI Guide on IPRs is to be found at https://portal.etsi.org/Resources/ETSI-Directives.
[i.3] ETSI Rules of Procedure (RoP).
NOTE: The ETSI Rules of Procedure (RoP) can be found at https://portal.etsi.org/Resources/ETSI-Directives.
[i.4] ETSI IPR database.
NOTE: Notification to ETSI of Essential or potentially Essential IPRs should be made using the ETSI IPR
database at https://ipr.etsi.org. Additional information can be found at https://www.etsi.org/intellectual-
property-rights.
[i.5] Declare your IPRs to ETSI.
NOTE: A step by step explanation for filling out the above mentioned forms is to be found in the
https://www.etsi.org/intellectual-property-rights/faqs. Additional information can be found at
https://www.etsi.org/intellectual-property-rights.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI SR 000 314 V2.32.1 (2022-11)
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the following terms apply:
The terms "ESSENTIAL", "IPR", "STANDARD" and "TECHNICAL SPECIFICATION" given below are defined in
the "Definitions" annex of the ETSI IPR Policy [i.1].
ESSENTIAL: as applied to IPR means that it is not possible on technical (but not commercial) grounds, taking into
account normal technical practice and the state of the art generally available at the time of standardization, to make, sell,
lease, otherwise dispose of, repair, use or operate EQUIPMENT or METHODS which comply with a STANDARD
without infringing that IPR.
For the avoidance of doubt in exceptional cases where a STANDARD can only be implemented by technical solutions,
all of which are infringements of IPRs, all such IPRs shall be considered ESSENTIAL.
NOTE: In practical terms, the existence of an Essential IPR makes it necessary to have a licence in order to
exploit the standard concerned.
IPR: shall mean any intellectual property right conferred by statute law including applications therefore other than
trademarks.
For the avoidance of doubt rights relating to get up, confidential information, trade secrets or the like are excluded from
the definition of IPR.
IPR licensing declaration: declaration to the effect that the IPR owner declares that he is prepared to grant licences on
fair, reasonable and non-discriminatory terms, in accordance with article 6.1 and comply with clause 6.1 bis of the ETSI
IPR Policy
notified: means any IPR information of which ETSI has been formally notified by the owner of the IPR or, any IPR
information of which ETSI has become aware, pursuant to the IPR Policy
STANDARD: shall mean any standard adopted by ETSI including options therein or amended versions and shall
include European Standards (ENs), ETSI standards (ESs), Common Technical Regulations (CTRs) which are taken
from ENs and including drafts of any of the foregoing, and documents made under the previous nomenclature,
including ETSs, I-ETSs, parts of NETs and TBRs, the technical specifications of which are available to all MEMBERS,
but not including any standards, or parts thereof, not made by ETSI.
The date on which a STANDARD is considered to be adopted by ETSI for the purposes of this POLICY shall be the
date on which the technical specification of that STANDARD was available to all MEMBERS.
TECHNICAL SPECIFICATION: shall mean any Technical Specification (TS) adopted by ETSI including options
therein or amended version including drafts, the Technical Specifications of which are available to all MEMBERS, but
not including any technical specifications, or parts thereof, not made by ETSI.
The date on which a TECHNICAL SPECIFICATION is considered to be adopted by ETSI for the purposes of this
POLICY shall be the date on which the technical content of that TECHNICAL SPECIFICATION was available to all
MEMBERS.
rd
3GPP standards: all standards issued by ETSI in relation to 3 Generation Partnership Project (3GPP)
NOTE: From https://portal.etsi.org/home, click on the "3GPP" tab.
BRAN standards: all standards issued by ETSI Project Broadband Radio Access Networks (BRAN)
NOTE: From https://portal.etsi.org/home, click on the "BRAN" tab.
DAB standards: all standards issued by ETSI in relation to Digital Audio Broadcasting (DAB)
NOTE: See https://www.etsi.org/technologies/broadcast.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI SR 000 314 V2.32.1 (2022-11)
DCS 1800 standards: all standards issued by ETSI in relation to European Cellular Digital - Global System for Mobile
Communication - DCS 1800 extensions
NOTE: From https://portal.etsi.org/home, click on the "3GPP" tab.
DECT/GSM interworking standards: all standards issued by ETSI in relation to interworking between DECT and
GSM
DECT standards: all standards issued by ETSI in relation to Digital Enhanced Cordless Telephone (DECT),
previously known as Digital Enhanced Cordless Telephone (DECT)
NOTE: From https://portal.etsi.org/home, click on the "DECT" tab.
DTM standards: all standards issued by ETSI in relation to Dynamic synchronous Transfer Mode (DTM)
NOTE: SPAN Technical Body has closed. See https://portal.etsi.org/tb/closed_tb/span.asp.
All SPAN standards can now be found under TISPAN.
DVB standards: all standards issued by ETSI in relation to Digital Video Broadcasting (DVB)
NOTE: See https://www.etsi.org/technologies/broadcast.
ERMES standards: all standards issued by ETSI in relation to European Radio Messaging System (ERMES)
NOTE: From https://portal.etsi.org/home, click on the "ERM" tab.
GPRS standards: all standards issued by ETSI in relation to General Packet Radio Service (GPRS)
NOTE: From https://portal.etsi.org/home, click on the "3GPP" tab.
GSM standards: all standards issued by ETSI in relation to European Cellular Digital - Global System for Mobile
Communication (GSM)
NOTE: From https://portal.etsi.org/home, click on the "3GPP" tab.
HDSL standards: all standards issued by ETSI in relation to High bit rate Digital Subscriber Line (HDSL)
NOTE: TM (TM 06) Technical Body has closed. See https://portal.etsi.org/tb/closed_tb/oldtbhome.asp.
HIPERLAN standards: all standards issued by ETSI in relation to High Performance Radio Local Area Network
(HIPERLAN)
ISDN standards: all standards issued by ETSI in relation to Integrated Services Digital Network (ISDN)
NOTE: SPAN Technical Body has closed. See https://portal.etsi.org/tb/closed_tb/span.asp.
Lawful Interception (LI) standards: all standards issued by ETSI in
...