ETSI EN 300 356-36 V3.3.1 (2003-01)
Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP) version 3 for the international interface; Part 36: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for supplementary services
Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP) version 3 for the international interface; Part 36: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for supplementary services
REN/SPAN-130297
Digitalno omrežje z integriranimi storitvami (ISDN) - Signalizacija št. 7 (SS7) - Tretja različica ISDN-uporabniškega dela (ISUP) za mednarodni vmesnik - 36. del: Abstraktni preskušalni niz (ATS) in delna dodatna informacija za preskušanje izvedbe protokola (PIXIT) - Proforma specifikacija za dopolnilne storitve
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUHVNXãDQMHVWRULWYHIntegrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP) version 3 for the international interface; Part 36: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for supplementary services33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 300 356-36 Version 3.3.1SIST EN 300 356-36 V3.3.1:2004en01-april-2004SIST EN 300 356-36 V3.3.1:2004SLOVENSKI
STANDARD
SIST EN 300 356-36 V3.3.1:2004
ETSI EN 300 356-36 V3.3.1 (2003-01)European Standard (Telecommunications series) Integrated Services Digital Network (ISDN);Signalling System No.7 (SS7);ISDN User Part (ISUP) version 3 for the international interface;Part 36: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT)proforma specification for supplementary services
SIST EN 300 356-36 V3.3.1:2004
ETSI ETSI EN 300 356-36 V3.3.1 (2003-01) 2
Reference REN/SPAN-130297 Keywords ATS, ISDN, ISUP, PIXIT, SS7, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2003. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 300 356-36 V3.3.1:2004
ETSI ETSI EN 300 356-36 V3.3.1 (2003-01) 3
Contents Intellectual Property Rights.6 Foreword.6 Introduction.7 1 Scope.8 2 References.8 3 Definitions and abbreviations.10 3.1 Definitions.10 3.2 Abbreviations.11 4 Void.13 5 Implementation under test and test methods.14 5.1 Identification of the system and implementation under test.14 5.2 ATM and testing configuration for ISUP '97.15 5.2.1 Intermediate exchanges.15 5.2.2 Local exchanges.16 5.2.3 Master-slave aspects in the test configuration.18 6 Test Suite Structure (TSS).19 7 Test Purposes (TP).20 7.1 Introduction.20 7.2 Test Purpose (TP) naming convention.20 7.2.1 Source of Test Purpose definition.20 7.2.2 Test Purpose structure.21 7.3 Test Purposes for the Supplementary Services.21 7.3.1 Calling Line Identification Presentation (CLIP).22 7.3.2 Calling line identification restriction (CLIR).29 7.3.3 Connected Line Identification Presentation (COLP).34 7.3.4 Connected Line Identification Restriction (COLR).52 7.3.5 Terminal portability (TP).64 7.3.6 User-To-User Signalling (UUS).74 7.3.6.1 User-To-User Signalling Service 1 (UUS1).74 7.3.6.2 User-To-User Signalling Service 2 (UUS2).98 7.3.6.3 User-To-User Signalling Service 3 (UUS3).114 7.3.7 Closed user group (CUG).128 7.3.8 SUB-addressing (SUB).140 7.3.9 Malicious Call IDentification (MCID).142 7.3.10 CONFerence call, add-on (CONF).152 7.3.11 Explicit call transfer (ECT).172 7.3.12 Call diversion (CFB, CFNR, CFU, CD).205 7.3.13 Call HOLD (HOLD).251 7.3.14 Call Waiting (CW).258 7.3.15 Completion of Calls to Busy Subscribers (CCBS).264 7.3.16 Three party service (3PTY).298 7.3.17 Completion of Calls on No Reply (CCNR).312 8 Test Coverage.345 9 Conformance to the PICS proforma specification.345 Annex A (normative): PICS proforma for ISDN User Part (ISUP) '97 - supplementary services.346 A.1 Instructions for completing the PICS proforma.346 A.1.1 Purposes and structure.346 A.1.2 Abbreviations and conventions.346 SIST EN 300 356-36 V3.3.1:2004
ETSI ETSI EN 300 356-36 V3.3.1 (2003-01) 4
A.2 Identification of the implementation.348 A.2.1 Date of the statement.348 A.2.2 Implementation Under Test (IUT) identification.348 A.2.3 System Under Test (SUT) identification.348 A.2.4 Product supplier.348 A.2.5 Client.348 A.2.6 ICS contact person.348 A.3 Identification of the reference specification.349 A.4 PICS proforma tables.349 A.4.1 Global statement of conformance.349 A.4.2 Roles.349 A.4.3 Capabilities.349 Annex B (normative): PIXIT proforma for ISDN User Part (ISUP) '97 supplementary services.360 B.1 Identification summary.360 B.2 Abstract test suite summary.360 B.3 Test laboratory.360 B.4 Client identification.360 B.5 System under test.361 B.6 Ancillary protocols.361 B.7 Protocol information for ISUP.361 B.7.1 Protocol identification.361 B.7.2 IUT information - PIXIT proforma tables.361 B.7.2.1 General configuration.361 B.7.2.2 Parameter values.362 B.7.2.3 Timer values.364 B.7.2.4 Other information.364 B.7.2.5 ISDN information.365 Annex C (normative): Protocol Conformance Test Report (PCTR) Proforma for ISDN User Part (ISUP) '97 supplementary services.366 C.1 Identification summary.366 C.1.1 Protocol conformance test report.366 C.1.2 IUT identification.366 C.1.3 Testing environment.366 C.1.4 Limits and reservation.367 C.1.5 Comments.367 C.2 IUT Conformance status.367 C.3 Static conformance summary.367 C.4 Dynamic conformance summary.367 C.5 Static conformance review report.368 C.6 Test campaign report.368 C.7 Observations.378 Annex D (normative): ATS ISDN User Part (ISUP) '97 Supplementary Services.379 D.1 ATS code.379 D.2 Conventions used within the ATS.379 D.2.1 Test suite parameters, constants and variables.379 D.2.2 Test case variables.379 SIST EN 300 356-36 V3.3.1:2004
ETSI ETSI EN 300 356-36 V3.3.1 (2003-01) 5
D.2.3 ASP constraints.379 D.2.4 Timers.379 D.2.5 Test suite operations.380 D.2.6 Aliases.380 D.2.7 Test case and step identifiers.380 D.2.8 Constraints.380 D.2.9 Dynamic behaviour part.381 D.2.10 Pre-test conditions.381 Annex E (normative): ATS for ISDN User Part (ISUP) v3 basic call control procedures.382 E.1 The TTCN Graphical form (TTCN.GR).382 E.2 The TTCN Machine Processable form (TTCN.MP).382 Annex F (informative): Bibliography.383 History.384
SIST EN 300 356-36 V3.3.1:2004
ETSI ETSI EN 300 356-36 V3.3.1 (2003-01) 6
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). The present document is part 36 of a multi-part deliverable covering the ISDN User Part (ISUP) version 3 for the international interface, as identified below: Part 1: "Basic services [ITU-T Recommendations Q.761 to Q.764 (1999) modified]"; Part 2: "ISDN supplementary service [ITU-T Recommendation Q.730 (1999) modified]"; Part 3: "Calling Line Identification Presentation (CLIP) supplementary service [ITU-T Recommendation Q.731, clause 3 (1993) modified]"; Part 4: "Calling Line Identification Restriction (CLIR) supplementary service [ITU-T Recommendation Q.731, clause 4 (1993) modified]"; Part 5: "Connected Line Identification Presentation (COLP) supplementary service [ITU-T Recommendation Q.731, clause 5 (1993) modified]"; Part 6: "Connected Line Identification Restriction (COLR) supplementary service [ITU-T Recommendation Q.731, clause 6 (1993) modified]"; Part 7: "Terminal Portability (TP) supplementary service [ITU-T Recommendation Q.733, clause 4 (1993) modified]"; Part 8: "User-to-User Signalling (UUS) supplementary service [ITU-T Recommendation Q.737, clause 1 (1997) modified]"; Part 9: "Closed User Group (CUG) supplementary service [ITU-T Recommendation Q.735, clause 1 (1993) modified]"; Part 10: "Subaddressing (SUB) supplementary service [ITU-T Recommendation Q.731, clause 8 (1992) modified]"; Part 11: "Malicious Call Identification (MCID) supplementary service [ITU-T Recommendation Q.731,
clause 7 (1997) modified]"; Part 12: "Conference Call, add-on (CONF) supplementary service [ITU-T Recommendation Q.734,
clause 1 (1993) and implementors guide (1998) modified]"; Part 14: "Explicit Call Transfer (ECT) supplementary service [ITU-T Recommendation Q.732, clause 7 (1996) and implementors guide (1998) modified]"; Part 15: "Diversion supplementary service [ITU-T Recommendation Q.732, clauses 2 to 5 (1999) modified]"; Part 16: "Call Hold (HOLD) supplementary service [ITU-T Recommendation Q.733, clause 2 (1993) modified]"; Part 17: "Call Waiting (CW) supplementary service [ITU-T Recommendation Q.733, clause 1 (1992) modified]"; SIST EN 300 356-36 V3.3.1:2004
ETSI ETSI EN 300 356-36 V3.3.1 (2003-01) 7
Part 18: "Completion of Calls to Busy Subscriber (CCBS) supplementary service [ITU-T Recommendation Q.733, clause 3 (1997) modified]"; Part 19: "Three-Party (3PTY) supplementary service [ITU-T Recommendation Q.734, clause 2 (1996) and implementors guide (1998) modified]"; Part 20: "Completion of Calls on No Reply (CCNR) supplementary service [ITU-T Recommendation Q.733, clause 5 (1999) modified]"; Part 21: "Anonymous Call Rejection (ACR) supplementary service [ITU-T Recommendation Q.731,
clause 4 (1993)]"; Part 31: "Protocol Implementation Conformance Statement (PICS) proforma specification for basic services"; Part 32: "Test Suite Structure and Test Purposes (TSS&TP) specification for basic services"; Part 33: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for basic services"; Part 34: "Protocol Implementation Conformance Statement (PICS) proforma specification for supplementary services"; Part 35: "Test Suite Structure and Test Purposes (TSS&TP) specification for supplementary services"; Part 36: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for supplementary services". NOTE: Parts 13 and 22 to 30 have not been issued.
National transposition dates Date of adoption of this EN: 27 December 2002 Date of latest announcement of this EN (doa): 31 March 2003 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 September 2003 Date of withdrawal of any conflicting National Standard (dow): 30 September 2003
Introduction The present document contains the conformance test specification for ISUP '97 supplementary services. The present document presents an Abstract Test Suite (ATS), written in Tree And Tabular Combined Notation (TTCN). The main body of the present document presents the requirements regarding the chosen test method, conventions used within the ATS, the test suite structure and the Test Purposes. The annexes present the Protocol Implementation Conformance Statements (PICS), the Protocol Implementation eXtra Information for Testing (PIXIT), Protocol Conformance Test Report (PCTR) and the ATS for ISUP '97 supplementary services, the last one being available on electronic media. SIST EN 300 356-36 V3.3.1:2004
ETSI ETSI EN 300 356-36 V3.3.1 (2003-01) 8
1 Scope The present document contains the validation (conformance) test specification for ISUP '97 supplementary services defined in ITU-T Recommendation Q.730 [1]. The present document presents an Abstract Test Suite (ATS) for ISUP '97 supplementary services, written in TTCN, see ISO/IEC 9646-5 [27]. The present document applies only to exchanges having implemented the ISUP '97 protocol specification. It is applicable for validation testing of all types of exchanges as defined in the ISUP '97 protocol specification. The present document does not deal with compatibility testing. The main text part of the present document presents the requirements regarding the chosen test method, conventions used within the ATS, the Test Suite Structure and Test Purposes (TSS&TP) for ISUP'97 supplementary services. The annexes present the Protocol Implementation Conformance Statements (PICS), the Protocol Implementation eXtra Information for Testing (PIXIT), Protocol Conformance Test Report (PCTR) and the ATS for ISUP '97 supplementary services, the last one being available on electronic media. Annex A provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISUP'97 supplementary services defined in compliance with the relevant requirements and in accordance with the guidance given in ISO/IEC 9646-7 [28]. This statement, of which capabilities and options of a telecommunication specification have been implemented, is necessary for evaluating the conformance of a particular implementation. The supplier of an implementation that is claimed to conform to the ISUP'97 supplementary services reference specification ITU-T Recommendation Q.730 [1] is required to complete a copy of the PICS proforma provided in annex A. Annex B provides the Protocol Implementation eXtra Information for Test (PIXIT) proforma, needed as a preparation for testing. Annex C provides the Protocol Conformance Test Report (PCTR) proforma, used for evaluating the results of the testing campaign. Annex D explains how to get hold of the actual ATS, which is delivered in electronic form only. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. • Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. [1] ITU-T Recommendation Q.730: "ISDN user part supplementary services". [2] ITU-T Recommendation Q.731: "Stage 3 description for number identification supplementary services using Signalling System No. 7". [3] ITU-T Recommendation Q.731.3 (1993): "Stage 3 description for number identification supplementary services using Signalling System No. 7: Calling line identification presentation (CLIP)". [4] ITU-T Recommendation Q.731.4 (1993): "Stage 3 description for number identification supplementary services using Signalling System No. 7: Calling line identification restriction (CLIR)". SIST EN 300 356-36 V3.3.1:2004
ETSI ETSI EN 300 356-36 V3.3.1 (2003-01) 9
[5] ITU-T Recommendation Q.731.5 (1993): "Stage 3 description for number identification supplementary services using Signalling System No. 7: Connected line identification presentation (COLP)". [6] ITU-T Recommendation Q.731.6 (1993): "Stage 3 description for number identification supplementary services using Signalling System No. 7: Connected line identification restriction (COLR)". [7] ITU-T Recommendation Q.731.7 (1997): "Stage 3 description for number identification supplementary services using Signalling System No. 7: Malicious call identification (MCID)". [8] ITU-T Recommendation Q.731.8 (1992): "Stage 3 description for number identification supplementary services using Signalling System No. 7: Sub-addressing (SUB)". [9] ITU-T Recommendation Q.732: "Stage 3 description for call offering supplementary services using Signalling System No. 7". [10] ITU-T Recommendation Q.732.7: "Stage 3 description for call offering supplementary services using Signalling System No. 7: Explicit Call Transfer". [11] ITU-T Recommendation Q.733.2 (1993): "Stage 3 description for call completion supplementary services using Signalling System No. 7: Call hold (HOLD)". [12] ITU-T Recommendation Q.733.3 (1997): "Stage 3 description for call completion supplementary services using Signalling System No. 7: Completion of calls to busy subscriber (CCBS)". [13] ITU-T Recommendation Q.733.4 (1993): "Stage 3 description for call completion supplementary services using Signalling System No. 7: Terminal portability (TP)". [14] ITU-T Recommendation Q.733.5 (1999): "Stage 3 description for call completion supplementary services using Signalling System No. 7: Completion of calls on no reply". [15] ITU-T Recommendation Q.734.1 (1993): "Stage 3 description for mult
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.