ETSI EN 302 094-2 V1.1.3 (1999-09)
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) and Signalling System No.7 (SS7) protocols; Call Forwarding on Not Reachable (CFNRc) supplementary service for Cordless Terminal Mobility (CTM) phase 1; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) and Signalling System No.7 (SS7) protocols; Call Forwarding on Not Reachable (CFNRc) supplementary service for Cordless Terminal Mobility (CTM) phase 1; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
DEN/SPS-05178-2
Digitalno omrežje z integriranimi storitvami (ISDN) – Protokola digitalne naročniške signalizacije št. 1 (DSS1) in signalizacije št. 7 (SS7) – Dopolnilna storitev: podaja klica, ko ni dosegljivosti (CFNRc), za mobilnost brezvrvičnega terminala (CTM), faza 1 – 2. del: Izjava o skladnosti izvedbe protokola (PICS) – Proforma specifikacija
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LJLWDOQHIntegrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) and Signalling System No.7 (SS7) protocols; Call Forwarding on Not Reachable (CFNRc) supplementary service for Cordless Terminal Mobility (CTM) phase 1; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 302 094-2 Version 1.1.3SIST EN 302 094-2 V1.1.3:2005en01-januar-2005SIST EN 302 094-2 V1.1.3:2005SLOVENSKI
STANDARD
SIST EN 302 094-2 V1.1.3:2005
ETSI EN 302 094-2 V1.1.3 (1999-09)European Standard (Telecommunications series)Integrated Services Digital Network (ISDN);Digital Subscriber Signalling System No. one (DSS1) andSignalling System No.7 (SS7) protocols;Call Forwarding on Not Reachable (CFNRc)supplementary service forCordless Terminal Mobility (CTM) phase 1;Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specificationSIST EN 302 094-2 V1.1.3:2005
ETSIETSI EN 302 094-2 V1.1.3 (1999-09)2ReferenceDEN/SPS-05178-2 (je0i0ie0.PDF)KeywordsCF, DSS1, ISDN, PICS, SS7, supplementaryserviceETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: editor@etsi.frCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 302 094-2 V1.1.3:2005
ETSIETSI EN 302 094-2 V1.1.3 (1999-09)3ContentsIntellectual Property Rights.5Foreword.5Introduction.51Scope.62References.63Definitions.74Abbreviations.75Conformance to this PICS proforma specification.8Annex A (normative):PICS proforma for EN 302 094-1.9A.1Instructions for completing the PICS proforma.9A.1.1Identification of the implementation.9A.1.2Global statement of conformance.9A.1.3Explanation of PICS proforma subclauses.9A.1.4Symbols, abbreviations and terms.10A.2Identification of the implementation.10A.2.1Date of the statement.10A.2.2Implementation Under Test (IUT) identification.10A.2.3System Under Test (SUT) identification.10A.2.4Product supplier.11A.2.5Client.11A.2.6PICS contact person.12A.3PICS/SCS relationship.12A.4Identification of the protocol.13A.5Global statement of conformance.13A.6Rs.13A.7User.14A.7.1MC.14A.7.2SC.14A.7.3PDUs.14A.7.4PDU P.15A.7.5Timers.15A.7.6Call states.15A.8Network.16A.8.1MC.16A.8.2SC.16A.8.3PDUs.16A.8.4PDU P.17A.8.5Timers.17A.8.6Call states.17Annex B (normative):Requirements list.18B.1User.18B.1.1Requirements on items used in the basic call PICS.18B.1.2Requirements on items used in the generic functional protocol PICS.18B.1.3Requirements on items used in the supplementary service interactions PICS.19SIST EN 302 094-2 V1.1.3:2005
ETSIETSI EN 302 094-2 V1.1.3 (1999-09)4B.2Network.19B.2.1Requirements on items used in the basic call PICS.19B.2.2Requirements on items used in the generic functional protocol PICS.19B.2.3Requirements on items used in the supplementary service interactions PICS.20Bibliography.21History.22SIST EN 302 094-2 V1.1.3:2005
ETSIETSI EN 302 094-2 V1.1.3 (1999-09)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server(http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. one(DSS1) and Signalling System No.7 (SS7) protocols; Call forwarding on not reachable supplementary service for CTMphase 1, as described below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification".National transposition datesDate of adoption of this EN:3 September 1999Date of latest announcement of this EN (doa):31 December 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):30 June 2000Date of withdrawal of any conflicting National Standard (dow):30 June 2000IntroductionTo evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities andoptions have been implemented for a telecommunication specification. Such a statement is called an ImplementationConformance Statement (ICS).SIST EN 302 094-2 V1.1.3:2005
ETSIETSI EN 302 094-2 V1.1.3 (1999-09)61ScopeThe present document provides the ICS proforma for the signalling application for the mobility management service forthe phase 1 of Call Forwarding on Not Reachable (CFNRc) supplementary service for the pan-European IntegratedServices Digital Network (ISDN) as provided by European public telecommunication operators at the T reference pointor coincident S and T reference point (as defined in ITU-T Recommendation I.411 [2]) by means of the DigitalSubscriber Signalling System No. one (DSS1) protocol. Stage three identifies the protocol procedures and switchingfunctions needed to support a telecommunications service (see CCITT Recommendation I.130 [1]).The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the signallingapplication for the mobility management service for the phase 1 of CFNRc supplementary service specified inEN 302 094-1 [8] in compliance with the relevant requirements and in accordance with the relevant guidance given inISO/IEC 9646-7 [10].The supplier of a protocol implementation which is claimed to conform to EN 302 094-1 [8] is required to complete acopy of the PICS proforma provided in annex A of the present document and is required to provide the informationnecessary to identify both the supplier and the implementation.2ReferencesThe following documents contain provisions which, through reference in this text, constitute provisions of the presentdocument.· References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific.· For a specific reference, subsequent revisions do not apply.· For a non-specific reference, the latest version applies.· A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]CCITT Recommendation I.130 (1988): "Method for the characterization of telecommunicationservices supported by an ISDN and network capabilities of an ISDN".[2]ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces - reference configurations".[3]EN 300 196-1 (V1.2): "Integrated Services Digital Network (ISDN); Generic functional protocolfor the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 1: Protocol specification".[4]ETS 300 196-2 (1996): "Integrated Services Digital Network (ISDN); Generic functional protocolfor the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification".[5]EN 300 403-1 (V1.2): "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".[6]EN 300 403-3 (V1.2): "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;Part 3: Protocol Implementation Conformance Statement (PICS) proforma specification".[7]EN 301 144-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) and Signalling System No. 7 (SS7) protocols; Signalling application for themobility management service on the alpha interface; Part 1: Protocol specification".SIST EN 302 094-2 V1.1.3:2005
ETSIETSI EN 302 094-2 V1.1.3 (1999-09)7[8]EN 302 094-1 (V1.1): "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 (SS7) protocols; Call Forwarding on NotReachable (CFNRc) supplementary service for Cordless Terminal Mobility (CTM) phase 1; Part 1:Protocol specification".[9]ISO/IEC 9646-1 (1994): "Information technology - Open Systems Interconnection - Conformancetesting methodology and framework - Part 1: General concepts".[10]ISO/IEC 9646-7 (1995): "Information technology - Open Systems Interconnection - Conformancetesting methodology and framework - Part 7: Implementation Conformance Statements".[11]EN 300 195-2: "Integrated Services Digital Network (ISDN); Supplementary service interactions;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol ImplementationConformance Statement (PICS) proforma specification".3DefinitionsFor the purposes of the present document, the following terms and definitions apply:-terms defined in EN 301 144-1 [7];-terms defined in ISO/IEC 9646-1 [9] and in ISO/IEC 9646-7 [10].In particular, the following terms defined in ISO/IEC 9646-1 [9] apply:Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or systemclaimed to conform to a given specification, stating which capabilities have been implemented. The PICS can takeseveral forms: protocol PICS, profile PICS, profile specific PICS, information object PICS, etc.ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or systembecomes an PICS.Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification.4AbbreviationsFor the purposes of the present document, the following abbreviations apply:DSS1Digital Subscriber Signalling System No. OneICSImplementation Conformance StatementISDNIntegrated Services Digital NetworkIUTImplementation Under TestMCMajor CapabilitiesOSIOpen Systems InterconnectionPParametersPDUProtocol Data UnitPICSProtocol Implementation Conformance StatementRRoleSCSubsidiary CapabilitiesSCSSystem Conformance StatementSUTSystem Under TestSIST EN 302 094-2 V1.1.3:2005
ETSIETSI EN 302 094-2 V1.1.3 (1999-09)85Conformance to this PICS proforma specificationIf it claims to conform to the present document, the actual PICS proforma to be filled in by a supplier shall betechnically equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming andordering of the proforma items.An PICS which conforms to the present document shall be a conforming PICS proforma completed in accordance withthe guidance for completion given in clause A.1.SIST EN 302 094-2 V1.1.3:2005
ETSIETSI EN 302 094-2 V1.1.3 (1999-09)9Annex A (normative):PICS proforma for EN 302 094-1Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that usersof the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intendedpurposes and may further publish the completed PICS.A.1Instructions for completing the PICS proformaA.1.1Identification of the implementationIdentification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test(SUT)) should be filled in so as to provide as much detail as possible regarding version numbers and configurationoptions.The product supplier information and client information should both be filled in if they are different.A person who can answer queries regarding information supplied in the PICS should be named as the contact person.The System Conformance Statement (SCS) as defined in ISO/IEC 9646-1 [9] is a document supplied by the client orproduct supplier that summarizes which Open Systems Interconnection (OSI) standards are implemented and to whichconformance is claimed. The PICS/SCS clause should describe the relationship of the PICS to the SCS.A.1.2Global statement of conformanceIf the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completed to facilitateselection of test cases for optional functions.If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed, and all non-supported mandatory capabilities should be identified and explained. Explanations may be entered in the comments fieldat the bottom of each table or on attached sheets of paper.A.1.3Explanation of PICS proforma subclausesThe PICS proforma contains a Roles (R) clause and thereafter is presented in two parts (for user and network) with thefollowing subclauses, as required:-Major Capabilities (MC);-Subsidiary Capabilities (SC);-Protocol Data Unit (PDU) support;-PDU Parameters (P);-timers;-call states.The User clause shall only be completed for user implementations (including private network implementations) whilethe Network clause shall only be completed for network implementations. The Rs subclause shall be completed for allimplementations.The relationship between this PICS proforma and other related PICS proforma (e.g. the basic call PICS proforma) isexpressed in the requirements list contained in annex B. This provides the additional restrictions placed on the relatedproforma (different conditions, different status, etc.).SIST EN 302 094-2 V1.1.3:2005
ETSIETSI EN 302 094-2 V1.1.3 (1999-09)10A.1.4Symbols, abbreviations and termsThe PICS proforma contained in this annex is comprised of information in tabular form in accordance with theguidelines presented in ISO/IEC 9646-7 [10].The reference column contained in the tables gives reference to the appropriate part(s) of EN 302 094-1 [8] (unlessanother numbered reference is explicitly indicated) describing the particular item. Note, however, that a referencemerely indicates the place where the core of a description of an item can be found. Any additional informat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.