ETSI EN 302 502 V2.1.3 (2017-07)
Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems; Harmonised Standard for access to radio spectrum
Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems; Harmonised Standard for access to radio spectrum
REN/BRAN-230014
Brezžični dostopovni sistemi (WAS) - Fiksni širokopasovni sistemi za prenos podatkov na frekvenci 5,8 GHz - Harmonizirani standard za dostop do radijskega spektra
General Information
Buy Standard
Standards Content (Sample)
Draft ETSI EN 302 502 V2.1.3 (2017-07)
HARMONISED EUROPEAN STANDARD
Wireless Access Systems (WAS);
5,8 GHz fixed broadband data transmitting systems;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 502 V2.1.3 (2017-07)
Reference
REN/BRAN-230014
Keywords
access, broadband, digital, fixed networks,
harmonised standard, multipoint
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 502 V2.1.3 (2017-07)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specification . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Designation of centre frequencies and frequency error . 11
4.2.1.1 Definition . 11
4.2.1.2 Limits . 11
4.2.1.3 Conformance . 11
4.2.2 Transmitter RF output power, EIRP and EIRP spectral density . 11
4.2.2.1 Definition . 11
4.2.2.2 Limits . 12
4.2.2.3 Conformance . 12
4.2.3 Transmitter unwanted emissions . 12
4.2.3.1 Transmitter unwanted emissions outside the 5 725 MHz to 5 875 MHz band . 12
4.2.3.1.1 Definition. 12
4.2.3.1.2 Limits . 12
4.2.3.1.3 Conformance . 12
4.2.3.2 Transmitter unwanted emissions within the 5 725 MHz to 5 875 MHz band . 12
4.2.3.2.1 Definition. 12
4.2.3.2.2 Limits . 13
4.2.3.2.3 Conformance . 13
4.2.4 Transmitter Power Control (TPC) . 13
4.2.4.1 Definition . 13
4.2.4.2 Limit . 13
4.2.4.3 Conformance . 13
4.2.5 Receiver spurious emissions . 14
4.2.5.1 Definition . 14
4.2.5.2 Limit . 14
4.2.5.3 Conformance . 14
4.2.6 Dynamic Frequency Selection (DFS) . 14
4.2.6.1 General Requirements . 14
4.2.6.2 DFS Technical requirements specifications . 14
4.2.6.2.1 Channel availability check and channel revalidation period . 14
4.2.6.2.2 In-Service Monitoring . 15
4.2.6.2.3 Channel Shutdown. 15
4.2.6.2.4 Non-Occupancy Period . 16
4.2.7 Receiver Blocking . 16
4.2.7.1 Applicability. 16
4.2.7.2 Definition . 16
4.2.7.3 Performance Criteria . 16
4.2.7.4 Limits . 17
4.2.7.5 Conformance . 17
4.2.8 User Access Restrictions . 17
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 502 V2.1.3 (2017-07)
4.2.8.1 Definition . 17
4.2.8.2 Requirement . 17
5 Testing for compliance with technical requirements . 18
5.1 Environmental conditions for testing . 18
5.1.1 Introduction. 18
5.1.2 Environmental specifications . 18
5.2 Interpretation of the measurement results . 18
5.3 Definition of other test conditions . 19
5.3.1 Test sequences and Traffic load . 19
5.3.1.1 General test transmission sequences . 19
5.3.1.2 Test transmission sequences for DFS tests . 19
5.3.2 Test frequencies . 19
5.3.3 Presentation of Equipment . 19
5.3.3.1 Integrated and Dedicated antennas . 19
5.4 Radio test suites . 20
5.4.1 Product information . 20
5.4.2 Frequency error . 20
5.4.2.1 Test conditions . 20
5.4.2.2 Test methods . 20
5.4.2.2.1 Conducted measurement. 20
5.4.2.2.2 Radiated measurement . 21
5.4.3 Transmitter RF Output Power, EIRP, TPC and EIRP Spectral Density . 21
5.4.3.1 Test conditions . 21
5.4.3.2 Test method . 21
5.4.3.2.1 Conducted measurement. 21
5.4.3.2.2 Radiated measurement . 24
5.4.4 Transmitter unwanted emissions . 24
5.4.4.1 Transmitter unwanted emissions outside the 5 725 MHz to 5 875 MHz band . 24
5.4.4.1.1 Test conditions . 24
5.4.4.1.2 Test method . 24
5.4.4.2 Transmitter unwanted emissions within the 5 725 MHz to 5 875 MHz band . 25
5.4.4.2.1 Test conditions . 25
5.4.4.2.2 Test method . 25
5.4.5 Receiver spurious emissions . 26
5.4.5.1 Test conditions . 26
5.4.5.2 Test method . 26
5.4.5.2.1 Conducted tests . 26
5.4.5.2.2 Radiated tests . 27
5.4.6 Dynamic Frequency Selection (DFS) . 27
5.4.6.1 Test conditions . 27
5.4.6.1.1 Introduction . 27
5.4.6.1.2 Selection of Radar Test Signals . 27
5.4.6.1.3 Test Set-Up . 27
5.4.6.2 Test Method . 28
5.4.6.2.1 Conducted measurement. 28
5.4.6.2.2 Radiated measurement . 32
5.4.7 Receiver Blocking . 33
5.4.7.1 Test conditions . 33
5.4.7.2 Test Method . 33
5.4.7.2.1 Conducted measurements . 33
5.4.7.2.2 Radiated measurements . 34
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 35
Annex B (normative): Test sites and arrangements for radiated measurements . 37
B.1 Test sites . 37
B.1.1 Open air test sites . 37
B.1.2 Anechoic chamber . 38
B.1.2.1 General . 38
B.1.2.2 Description . 38
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 302 502 V2.1.3 (2017-07)
B.1.2.3 Influence of parasitic reflections . 38
B.1.2.4 Calibration and mode of use . 39
B.2 Test antenna . 40
B.3 Substitution antenna . 41
Annex C (normative): General description of measurement . 42
C.1 Conducted measurements . 42
C.2 Radiated measurements . 42
C.3 Substitution measurement . 43
Annex D (normative): Dynamic Frequency Selection (DFS) parameters . 44
Annex E (informative): Bibliography . 47
Annex F (informative): Change history . 48
History . 49
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 302 502 V2.1.3 (2017-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Broadband Radio
Access Networks (BRAN), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI
standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 302 502 V2.1.3 (2017-07)
Introduction
The present document covers 5,8 GHz high performance Broadband Fixed Wireless Access systems (BFWA) including
equipment which is used in wireless local area networks. Such networks provide high speed data communications in
between devices connected to the wireless infrastructure.
ETSI
---------------------- Page: 7 ----------------------
8 Draft ETSI EN 302 502 V2.1.3 (2017-07)
1 Scope
The present document specifies technical characteristics and methods of measurements for Fixed Broadband Data
Transmitting Systems intended to operate in the 5,8 GHz band (5 725 MHz to 5 875 MHz). The present document is
equally applicable to systems utilizing integral or dedicated antennas.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.3] ETSI EN 300 019-1-0 (V2.1.2) (09-2003): "Environmental Engineering (EE); Environmental
conditions and environmental tests for telecommunications equipment; Part 1-0: Classification of
environmental conditions; Introduction".
[i.4] ETSI TR 100 028 (all parts) (V1.4.1) (12-2001): "Electromagnetic compatibility and Radio
spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment
characteristics".
[i.5] ETSI TR 100 028-2 (V1.4.1) (12-2001): "Electromagnetic compatibility and Radio spectrum
Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics;
Part 2".
ETSI
---------------------- Page: 8 ----------------------
9 Draft ETSI EN 302 502 V2.1.3 (2017-07)
[i.6] CEPT/ECC Report 68 (Riga, June 2005): "Compatibility studies in the band 5725-5875 MHz
between Fixed Wireless Access (FWA) systems and other systems".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in Directive 2014/53/EU [i.1] and the
following apply:
antenna assembly: combination of the antenna (integral or dedicated), its coaxial cable and if applicable, its antenna
connector and associated switching components
available channel: channel identified as usable as an Operating Channel
Broadband Fixed Wireless Access (BFWA): operation of fixed Point to Point or fixed Point to Multipoint wireless
devices or systems used to connect fixed locations
burst: period during which radio waves are intentionally transmitted, preceded and succeeded by periods during which
no intentional transmission is made
dedicated antenna: antenna external to the equipment, using an antenna connector with a cable or a wave-guide
NOTE: The antenna has been designed or developed for on
...
SLOVENSKI STANDARD
oSIST prEN 302 502 V2.1.3:2017
01-september-2017
%UH]åLþQLGRVWRSRYQLVLVWHPL :$6 )LNVQLãLURNRSDVRYQLVLVWHPL]DSUHQRV
SRGDWNRYQDIUHNYHQFL*+]+DUPRQL]LUDQLVWDQGDUG]DGRVWRSGRUDGLMVNHJD
VSHNWUD
Wireless Access Systems (WAS) - 5,8 GHz fixed broadband data transmitting systems -
Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 302 502 V2.1.3 (2017-07)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
35.110 Omreževanje Networking
oSIST prEN 302 502 V2.1.3:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 302 502 V2.1.3:2017
---------------------- Page: 2 ----------------------
oSIST prEN 302 502 V2.1.3:2017
Draft ETSI EN 302 502 V2.1.3 (2017-07)
HARMONISED EUROPEAN STANDARD
Wireless Access Systems (WAS);
5,8 GHz fixed broadband data transmitting systems;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
oSIST prEN 302 502 V2.1.3:2017
2 Draft ETSI EN 302 502 V2.1.3 (2017-07)
Reference
REN/BRAN-230014
Keywords
access, broadband, digital, fixed networks,
harmonised standard, multipoint
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 302 502 V2.1.3:2017
3 Draft ETSI EN 302 502 V2.1.3 (2017-07)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specification . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Designation of centre frequencies and frequency error . 11
4.2.1.1 Definition . 11
4.2.1.2 Limits . 11
4.2.1.3 Conformance . 11
4.2.2 Transmitter RF output power, EIRP and EIRP spectral density . 11
4.2.2.1 Definition . 11
4.2.2.2 Limits . 12
4.2.2.3 Conformance . 12
4.2.3 Transmitter unwanted emissions . 12
4.2.3.1 Transmitter unwanted emissions outside the 5 725 MHz to 5 875 MHz band . 12
4.2.3.1.1 Definition. 12
4.2.3.1.2 Limits . 12
4.2.3.1.3 Conformance . 12
4.2.3.2 Transmitter unwanted emissions within the 5 725 MHz to 5 875 MHz band . 12
4.2.3.2.1 Definition. 12
4.2.3.2.2 Limits . 13
4.2.3.2.3 Conformance . 13
4.2.4 Transmitter Power Control (TPC) . 13
4.2.4.1 Definition . 13
4.2.4.2 Limit . 13
4.2.4.3 Conformance . 13
4.2.5 Receiver spurious emissions . 14
4.2.5.1 Definition . 14
4.2.5.2 Limit . 14
4.2.5.3 Conformance . 14
4.2.6 Dynamic Frequency Selection (DFS) . 14
4.2.6.1 General Requirements . 14
4.2.6.2 DFS Technical requirements specifications . 14
4.2.6.2.1 Channel availability check and channel revalidation period . 14
4.2.6.2.2 In-Service Monitoring . 15
4.2.6.2.3 Channel Shutdown. 15
4.2.6.2.4 Non-Occupancy Period . 16
4.2.7 Receiver Blocking . 16
4.2.7.1 Applicability. 16
4.2.7.2 Definition . 16
4.2.7.3 Performance Criteria . 16
4.2.7.4 Limits . 17
4.2.7.5 Conformance . 17
4.2.8 User Access Restrictions . 17
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 302 502 V2.1.3:2017
4 Draft ETSI EN 302 502 V2.1.3 (2017-07)
4.2.8.1 Definition . 17
4.2.8.2 Requirement . 17
5 Testing for compliance with technical requirements . 18
5.1 Environmental conditions for testing . 18
5.1.1 Introduction. 18
5.1.2 Environmental specifications . 18
5.2 Interpretation of the measurement results . 18
5.3 Definition of other test conditions . 19
5.3.1 Test sequences and Traffic load . 19
5.3.1.1 General test transmission sequences . 19
5.3.1.2 Test transmission sequences for DFS tests . 19
5.3.2 Test frequencies . 19
5.3.3 Presentation of Equipment . 19
5.3.3.1 Integrated and Dedicated antennas . 19
5.4 Radio test suites . 20
5.4.1 Product information . 20
5.4.2 Frequency error . 20
5.4.2.1 Test conditions . 20
5.4.2.2 Test methods . 20
5.4.2.2.1 Conducted measurement. 20
5.4.2.2.2 Radiated measurement . 21
5.4.3 Transmitter RF Output Power, EIRP, TPC and EIRP Spectral Density . 21
5.4.3.1 Test conditions . 21
5.4.3.2 Test method . 21
5.4.3.2.1 Conducted measurement. 21
5.4.3.2.2 Radiated measurement . 24
5.4.4 Transmitter unwanted emissions . 24
5.4.4.1 Transmitter unwanted emissions outside the 5 725 MHz to 5 875 MHz band . 24
5.4.4.1.1 Test conditions . 24
5.4.4.1.2 Test method . 24
5.4.4.2 Transmitter unwanted emissions within the 5 725 MHz to 5 875 MHz band . 25
5.4.4.2.1 Test conditions . 25
5.4.4.2.2 Test method . 25
5.4.5 Receiver spurious emissions . 26
5.4.5.1 Test conditions . 26
5.4.5.2 Test method . 26
5.4.5.2.1 Conducted tests . 26
5.4.5.2.2 Radiated tests . 27
5.4.6 Dynamic Frequency Selection (DFS) . 27
5.4.6.1 Test conditions . 27
5.4.6.1.1 Introduction . 27
5.4.6.1.2 Selection of Radar Test Signals . 27
5.4.6.1.3 Test Set-Up . 27
5.4.6.2 Test Method . 28
5.4.6.2.1 Conducted measurement. 28
5.4.6.2.2 Radiated measurement . 32
5.4.7 Receiver Blocking . 33
5.4.7.1 Test conditions . 33
5.4.7.2 Test Method . 33
5.4.7.2.1 Conducted measurements . 33
5.4.7.2.2 Radiated measurements . 34
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 35
Annex B (normative): Test sites and arrangements for radiated measurements . 37
B.1 Test sites . 37
B.1.1 Open air test sites . 37
B.1.2 Anechoic chamber . 38
B.1.2.1 General . 38
B.1.2.2 Description . 38
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 302 502 V2.1.3:2017
5 Draft ETSI EN 302 502 V2.1.3 (2017-07)
B.1.2.3 Influence of parasitic reflections . 38
B.1.2.4 Calibration and mode of use . 39
B.2 Test antenna . 40
B.3 Substitution antenna . 41
Annex C (normative): General description of measurement . 42
C.1 Conducted measurements . 42
C.2 Radiated measurements . 42
C.3 Substitution measurement . 43
Annex D (normative): Dynamic Frequency Selection (DFS) parameters . 44
Annex E (informative): Bibliography . 47
Annex F (informative): Change history . 48
History . 49
ETSI
---------------------- Page: 7 ----------------------
oSIST prEN 302 502 V2.1.3:2017
6 Draft ETSI EN 302 502 V2.1.3 (2017-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Broadband Radio
Access Networks (BRAN), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI
standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 8 ----------------------
oSIST prEN 302 502 V2.1.3:2017
7 Draft ETSI EN 302 502 V2.1.3 (2017-07)
Introduction
The present document covers 5,8 GHz high performance Broadband Fixed Wireless Access systems (BFWA) including
equipment which is used in wireless local area networks. Such networks provide high speed data communications in
between devices connected to the wireless infrastructure.
ETSI
---------------------- Page: 9 ----------------------
oSIST prEN 302 502 V2.1.3:2017
8 Draft ETSI EN 302 502 V2.1.3 (2017-07)
1 Scope
The present document specifies technical characteristics and methods of measurements for Fixed Broadband Data
Transmitting Systems intended to operate in the 5,8 GHz band (5 725 MHz to 5 875 MHz). The present document is
equally applicable to systems utilizing integral or dedicated antennas.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.3] ETSI EN 300 019-1-0 (V2.1.2) (09-2003): "Environmental Engineering (EE); Environmental
conditions and environmental tests for telecommunications equipment; Part 1-0: Classification of
environmental conditions; Introduction".
[i.4] ETSI TR 100 028 (all parts) (V1.4.1) (12-2001): "Electromagnetic compatibility and Radio
spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment
characteristics".
[i.5] ETSI TR 100 028-2 (V1.4.1) (12-2001): "Electromagnetic compatibility and Radio spectrum
Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics;
Part 2".
ETSI
---------------------- Page: 10 ----------------------
oSIST prEN 302 502
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.