Fixed Radio Systems; Point-to-point packet data equipment; Parameters for radio systems with packet data interfaces for transmission of digital signals operating in the frequency range 7, 8, 13, 15, 18, 23, 26, 28, 32, 38, 52 to 55 GHz

REN/TM-04113

Fiksni radijski sistemi – Oprema tipa točka-točka za paketirane podatke – Parametri za radijske sisteme z vmesniki za paketirane podatke za prenos digitalnih signalov, ki delujejo v frekvenčnem območju od 7, 8, 13, 15, 18, 23, 26, 28, 32, 38, 52 do 55 GHz

General Information

Status
Published
Publication Date
14-Feb-2002
Technical Committee
Current Stage
13 - TB decision to make document historical
Completion Date
10-May-2007

Buy Standard

Standard
EN 301 785 V1.2.1:2003
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fixed Radio Systems; Point-to-point packet data equipment; Parameters for radio systems with packet data interfaces for transmission of digital signals operating in the frequency range 7, 8, 13, 15, 18, 23, 26, 28, 32, 38, 52 to 55 GHz33.060.30Radiorelejni in fiksni satelitski komunikacijski sistemiRadio relay and fixed satellite communications systems33.040.20Prenosni sistemTransmission systemsICS:Ta slovenski standard je istoveten z:EN 301 785 Version 1.2.1SIST EN 301 785 V1.2.1:2003en01-december-2003SIST EN 301 785 V1.2.1:2003SLOVENSKI
STANDARD



SIST EN 301 785 V1.2.1:2003



ETSI EN 301 785 V1.2.1 (2002-02)European Standard (Telecommunications series) Fixed Radio Systems;Point-to-point packet data equipment;Parameters for radio systems with packet data interfacesfor transmission of digital signals operating in the frequencyrange 7, 8, 13, 15, 18, 23, 26, 28, 32, 38, 52 to 55 GHz SIST EN 301 785 V1.2.1:2003



ETSI ETSI EN 301 785 V1.2.1 (2002-02)2
Reference REN/TM-04113 Keywords digital, DRRS, point-to-point, radio, transmission ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2002. All rights reserved.
SIST EN 301 785 V1.2.1:2003



ETSI ETSI EN 301 785 V1.2.1 (2002-02)3 Contents Intellectual Property Rights.4 Foreword.4 1 Scope.5 2 References.5 3 Definitions, symbols and abbreviations.7 3.1 Definitions.7 3.2 Symbols.7 3.3 Abbreviations.7 4 General characteristics.7 4.1 Channel arrangements.7 4.2 Channel spacing.7 4.3 Baseband interface parameters.7 4.3.1 Ethernet data interface.7 4.3.2 Plesiochronous interfaces.8 4.3.3 ISDN interface (primary rate).8 4.3.4 SDH baseband interface.8 4.4 Performance and availability requirements.8 4.5 System block diagram.8 4.6 Other general characteristics.8 5 System parameters.9 5.1 Selection of specification.9 5.2 Translation of requirements.11 Annex A (informative): FER/BER equivalence and FER measurement.12 A.1 FER/BER equivalence.12 A.2 FER equipment settings and measurement techniques (example).12 Annex B (informative): Bibliography.13 History.14
SIST EN 301 785 V1.2.1:2003



ETSI ETSI EN 301 785 V1.2.1 (2002-02)4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Transmission and Multiplexing (TM). The present document has already been published as an ETSI Technical Specification, under TS 101 785. This V1.2.1 contains full formal revision, in term of definitions of spectral efficiency, now referenced to other existing ENs for conventional PDH/SDH application in the same frequency bands. The former title of the present document V1.1.1 was "Fixed Radio Systems; Point-to-point equipment; Parameters for packet data radio systems for transmission of digital signals operating in the frequency range 23, 26, 28 or 38 GHz".
National transposition dates Date of adoption of this EN: 8 February 2002 Date of latest announcement of this EN (doa): 31 May 2002 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 November 2002 Date of withdrawal of any conflicting National Standard (dow): 30 November 2002
SIST EN 301 785 V1.2.1:2003



ETSI ETSI EN 301 785 V1.2.1 (2002-02)5 1 Scope The present document specifies the minimum performance parameters for terrestrial fixed service radio communications equipment operating at 7, 8, 13, 15, 18, 23, 26, 28, 32, 38, 52 to 55 GHz provided with a combination Packet data interfaces or of Packet Data interfaces and PDH/SDH interfaces. Such digital systems are intended for use for point-to-point connections in local and regional networks. For regulatory purpose, reference shall be made to existing PDH/SDH standards to be used to assess the efficient use of radio spectrum. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. NOTE: In the case of non-specific references, the time frame of application and new certification procedures for new releases of these normative references after the date of the first public enquiry of the present document or the first certification of the equipment shall be agreed between the supplier and the regulatory authority. These new certification procedures will cover in any case only the parameters subject to changes from the on going release during the previous certification. [1] ITU-R Recommendation F.1102: "Characteristics of fixed wireless systems operating in frequency bands above about 17 GHz". [2] ITU-R Recommendation P.530-9: "Propagation data and prediction methods required for the design of terrestrial line-of-sight systems". [3] ETSI TR 101 035 (V1.1.3): "Transmission and Multiplexing (TM); Synchronous Digital Hierarchy (SDH) aspects regarding Digital Radio Relay Systems (DRRS)". [4] ISO/IEC 8802-3: "Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications". [5] IEEE 802.3: "Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications". [6] IEEE 802.1Q (1998): "Local and Metropolitan Area Networks: Virtual Bridged Local Area Networks". [7] ETSI EN 300 197 (V1.3.1): "Fixed Radio Systems; Point-to-point equipment; Parameters for radio systems for the transmission of digital signals operating at 38 GHz". [8] ETSI EN 300 198 (V1.3.1): "Fixed Radio Systems; Point-to-point equipment; Parameters for radio systems for the transmission of digital signals operating at 23 GHz". [9] ETSI EN 300 407 (V1.2.1): "Fixed Radio Systems; Point-to-point equipment; Parameters for digital radio systems for the transmission of digital signals operating at 55 GHz". SIST EN 301 785 V1.2.1:2003



ETSI ETSI EN 301 785 V1.2.1 (2002-02)6 [10] ETSI EN 300 234 (V1.2.1): "Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS); High capacity DRRS carrying 1 x STM-1 signals and operating in frequency bands with about 30 MHz channel spacing and alternated arrangements". [11] ETSI EN 300 430 (V1.2.1): "Fixed Radio Systems; Point-to-point equipment; Parameters for radio systems for the transmission of STM-1 digital signals operating in the 18 GHz frequency band with channel spacing of 55 MHz and 27,5 MHz". [12] ETSI EN 300 431 (V1.2.1): "Fixed Radio Systems; Point-to-point equipment; Parameters for
radio system for the transmission of digital signals operating in the frequency range 24,50 GHz to 29,50 GHz". [13] ETSI EN 300 639 (V1.2.1): "Fixed Radio Systems; Point-to-point equipment; Sub-STM-1 digital radio systems operating in the 13 GHz, 15 GHz and 18 GHz frequency bands with about 28 MHz co-polar and 14 MHz cross-polar channel spacing". [14] ETSI EN 300 786 (V1.2.1): "Fixed Radio Systems; Point-to-point equipment; Sub-STM-1 digital radio systems operating in the 13 GHz, 15 GHz and 18 GHz frequency bands with about 14 MHz co-polar channel spacing". [15] ETSI EN 301 128 (V1.1.2): "Fixed Radio Systems; Point-to-point equipment; Plesiochronous Digital Hierarchy (PDH); Low and medium capacity digital radio systems operating in the
13 GHz, 15 GHz and 18 GHz frequency bands". [16] ETSI EN 301 216 (V1.1.1): "Fixed Radio Systems; Point-to-point equipment; Plesiochronous Digital Hierarchy (PDH); Low and medium capacity and STM-0 digital radio system operating in the frequency bands in the range 3 GHz to 11 GHz". [17] ETSI EN 301 751: "Fixed Radio Systems; Point-to-Point equipments and antennas; Generic harmonized standard for Point-to-Point digital fixed radio systems and antennas covering the essential requirements under article 3.2 of the 1999/5/EC Directive". [18] ETSI EN 301 786 (V1.2.1): "Fixed Radio Systems; Point-to-point equipment; Parameters for digital radio systems for the transmission of digital signals operating at 52 GHz". [19] ITU-T Recommendation G.703: "Physical/electrical characteristics of hierarchical digital interfaces". [20] ITU-T Recommendation G.704: "Synchronous frame structures used at 1 544, 6 312, 2 048, 8 448 and 44 736 kbit/s hierarchical levels". [21] ITU-T Recommendation I.412: "ISDN user
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.