ETSI EN 302 194 V2.1.1 (2017-02)
Navigation radar used on inland waterways; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
Navigation radar used on inland waterways; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
REN/ERM-TG26-141
Navigacijski radar za uporabo na celinskih vodnih poteh - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU
Ta dokument določa tehnične karakteristike in merilne metode za naslednjo opremo:
1) radar v pasu X in z njim povezan glavni navigacijski prikazovalnik, namenjen za plovbo plovil na celinskih vodnih poteh, za katerega veljajo zahteve Centralne komisije za plovbo po Renu (CCNR) in Donavske komisije (DC).
Ta dokument vsebuje minimalne tehnične, operativne in funkcionalne zahteve ter opisuje preskuse in pogoje izvajanja teh preskusov, s katerimi se ugotavlja, ali oprema izpolnjuje minimalne zahteve.
Dodatne zmogljivosti, ki jih lahko vključuje ta oprema, npr. celinske funkcije ECDIS, avtomatsko krmiljenje ali dodatni vmesniki, niso zajete v tem dokumentu, zato se lahko uporabljajo drugi ustrezni standardi.
Za namestitev radarske opreme, namenjene za navigacijo na celinskih vodnih poteh, veljajo dodatni pogoji, opisani v dodatku E.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Navigation radar used on inland waterways - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:ETSI EN 302 194 V2.1.1 (2017-02)SIST EN 302 194 V2.1.1:2017en01-april-2017SIST EN 302 194 V2.1.1:2017SLOVENSKI
STANDARD
SIST EN 302 194 V2.1.1:2017
ETSI EN 302 194 V2.1.1 (2017-02) Navigation radar used on inland waterways; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
HARMONISED EUROPEAN STANDARD SIST EN 302 194 V2.1.1:2017
ETSI ETSI EN 302 194 V2.1.1 (2017-02) 2
Reference REN/ERM-TG26-141 Keywords harmonised standard, maritime, navigation, radar, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 194 V2.1.1:2017
ETSI ETSI EN 302 194 V2.1.1 (2017-02) 3 Contents Intellectual Property Rights . 8 Foreword . 8 Modal verbs terminology . 8 1 Scope . 9 2 References . 9 2.1 Normative references . 9 2.2 Informative references . 10 3 Definitions, symbols and abbreviations . 10 3.1 Definitions . 10 3.2 Symbols . 10 3.3 Abbreviations . 11 4 General requirements . 11 4.1 Purpose of the radar equipment . 11 4.2 Construction and design . 12 4.3 Operating frequency range . 12 4.4 Operational controls . 12 4.5 Interfaces . 12 4.5.1 Fail safe design . 12 4.5.2 Display of data received via interfaces . 13 4.5.3 Operation of equipments connected via interfaces . 13 4.5.4 Interpretation and presentation of data delivered via interfaces. 13 4.6 Software . 13 4.6.1 Software performance . 13 4.6.2 Software protection . 13 4.7 Equipment labelling . 13 4.8 Operating and service manuals . 13 5 Testing for compliance with technical requirements . 14 5.1 Environmental conditions for testing . 14 5.2 Standard operating mode of the radar equipment . 14 6 General conditions of tests . 14 6.1 Normal test conditions . 14 6.1.1 Introduction. 14 6.1.2 Normal temperature and humidity . 15 6.1.3 Normal test power supply . 15 6.1.3.1 AC test power supply . 15 6.1.3.2 DC test power supply . 15 6.2 Extreme test conditions . 15 6.2.1 Extreme temperatures . 15 6.2.1.1 Indoor unit . 15 6.2.1.2 Outdoor unit . 15 6.2.2 Extreme power supply voltage test conditions . 16 6.2.3 Extreme vibration test conditions . 16 7 Procedures for tests under extreme conditions . 16 7.1 Performance check procedure . 16 7.1.1 Introduction. 16 7.1.2 Method . 16 7.1.3 Required test result . 16 7.2 Extreme temperature tests . 16 7.2.1 Test of the indoor unit . 16 7.2.1.1 Definition . 16 7.2.1.2 Test method . 17 7.2.1.3 Required test result . 17 SIST EN 302 194 V2.1.1:2017
ETSI ETSI EN 302 194 V2.1.1 (2017-02) 4 7.2.2 Test of the outdoor unit . 17 7.2.2.1 Definition . 17 7.2.2.2 Test method . 17 7.2.2.3 Required test result . 18 7.3 Damp heat test . 18 7.3.1 Definition . 18 7.3.2 Test method . 18 7.3.3 Required test result . 18 7.4 Extreme power voltage and frequency test . 18 7.4.1 Definition . 18 7.4.2 Test method . 18 7.4.3 Required test result . 18 7.5 Extreme vibration test . 19 7.5.1 Definition . 19 7.5.2 Test method . 19 7.5.3 Required test result . 19 8 Operational, functional and technical requirements, methods of testing and required test results. 19 8.1 Operational and functional requirements . 19 8.1.1 Start-up time . 19 8.1.1.1 Definition . 19 8.1.1.2 Test method . 19 8.1.1.3 Required test result . 20 8.1.2 System sensitivity . 20 8.1.2.1 Definition . 20 8.1.2.2 Test method . 20 8.1.2.3 Required test result . 20 8.1.3 Gain dynamic range . 20 8.1.3.1 Definition . 20 8.1.3.2 Test method . 20 8.1.3.3 Required test result . 20 8.1.4 Minimum range . 21 8.1.4.1 Definition . 21 8.1.4.2 Test method . 21 8.1.4.3 Required test result . 21 8.1.5 Radial resolution capability . 21 8.1.5.1 Definition . 21 8.1.5.2 Test method . 21 8.1.5.3 Required test results . 21 8.1.6 Azimuthal resolution capability . 21 8.1.6.1 Definition . 21 8.1.6.2 Test method . 22 8.1.6.3 Required test results . 22 8.1.7 Range scales and fixed range rings . 22 8.1.7.1 Definition . 22 8.1.7.2 Test method . 22 8.1.7.3 Required test result . 22 8.1.8 Variable Range Marker (VRM) . 23 8.1.8.1 Definition . 23 8.1.8.2 Test method . 23 8.1.8.3 Required test result . 23 8.1.9 Heading line and radar picture azimuth angular error . 23 8.1.9.1 Definition . 23 8.1.9.2 Test method . 23 8.1.9.3 Required test result . 23 8.1.10 Bearing facilities and bearing scale . 24 8.1.10.1 Definition . 24 8.1.10.2 Test method . 24 8.1.10.3 Required test result . 24 8.1.11 Nautical information and navigation lines . 24 8.1.11.1 Definition . 24 8.1.11.2 Test method . 24 SIST EN 302 194 V2.1.1:2017
ETSI ETSI EN 302 194 V2.1.1 (2017-02) 5 8.1.11.3 Required test result . 25 8.1.12 Facilities for suppressing sea and rain clutter . 25 8.1.12.1 Definition . 25 8.1.12.2 Test method . 25 8.1.12.3 Required test result . 25 8.1.13 Suppression of interference from other radars . 25 8.1.13.1 Definition . 25 8.1.13.2 Test method . 26 8.1.13.3 Required test result . 26 8.1.14 Compatibility with radar beacons . 26 8.1.14.1 Definition . 26 8.1.14.2 Test method . 26 8.1.14.3 Required test result . 26 8.2 Operation controls and indicators . 26 8.2.1 Directly accessible operation controls . 26 8.2.1.1 Definition . 26 8.2.1.2 Test method . 26 8.2.1.3 Required test result . 26 8.2.2 Brilliance controls . 27 8.2.2.1 Definition . 27 8.2.2.2 Test method . 27 8.2.2.3 Required test result . 27 8.2.3 Heading line on/off control (SHM) . 28 8.2.3.1 Definition . 28 8.2.3.2 Test method . 28 8.2.3.3 Required test result . 28 8.2.4 Frequency tuning control and indicator . 28 8.2.4.1 Definition . 28 8.2.4.2 Test method . 28 8.2.4.3 Required test result . 28 8.3 Display unit characteristics. 29 8.3.1 Display screen dimensions . 29 8.3.1.1 Definition . 29 8.3.1.2 Test method . 29 8.3.1.3 Required test result . 29 8.3.2 Display screen brilliance . 29 8.3.2.1 Definition . 29 8.3.2.2 Test method . 29 8.3.2.3 Required test result . 29 8.3.3 Display resolution . 30 8.3.3.1 Definition . 30 8.3.3.2 Test method . 30 8.3.3.3 Required test result . 30 8.3.4 Picture generation characteristics . 30 8.3.4.1 Definition . 30 8.3.4.2 Test method . 30 8.3.4.3 Required test result . 30 8.4 Radar picture characteristics. 30 8.4.1 Radar picture . 30 8.4.1.1 Definition . 30 8.4.1.2 Test method . 30 8.4.1.3 Required test result . 31 8.4.2 Effective diameter of the radar picture . 31 8.4.2.1 Definition .
...
ETSI EN 302 194 V2.1.1 (2017-02)
HARMONISED EUROPEAN STANDARD
Navigation radar used on inland waterways;
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU
---------------------- Page: 1 ----------------------
2 ETSI EN 302 194 V2.1.1 (2017-02)
Reference
REN/ERM-TG26-141
Keywords
harmonised standard, maritime, navigation,
radar, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 302 194 V2.1.1 (2017-02)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 10
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 10
3.3 Abbreviations . 11
4 General requirements . 11
4.1 Purpose of the radar equipment . 11
4.2 Construction and design . 12
4.3 Operating frequency range . 12
4.4 Operational controls . 12
4.5 Interfaces . 12
4.5.1 Fail safe design . 12
4.5.2 Display of data received via interfaces . 13
4.5.3 Operation of equipments connected via interfaces . 13
4.5.4 Interpretation and presentation of data delivered via interfaces. 13
4.6 Software . 13
4.6.1 Software performance . 13
4.6.2 Software protection . 13
4.7 Equipment labelling . 13
4.8 Operating and service manuals . 13
5 Testing for compliance with technical requirements . 14
5.1 Environmental conditions for testing . 14
5.2 Standard operating mode of the radar equipment . 14
6 General conditions of tests . 14
6.1 Normal test conditions . 14
6.1.1 Introduction. 14
6.1.2 Normal temperature and humidity . 15
6.1.3 Normal test power supply . 15
6.1.3.1 AC test power supply . 15
6.1.3.2 DC test power supply . 15
6.2 Extreme test conditions . 15
6.2.1 Extreme temperatures . 15
6.2.1.1 Indoor unit . 15
6.2.1.2 Outdoor unit . 15
6.2.2 Extreme power supply voltage test conditions . 16
6.2.3 Extreme vibration test conditions . 16
7 Procedures for tests under extreme conditions . 16
7.1 Performance check procedure . 16
7.1.1 Introduction. 16
7.1.2 Method . 16
7.1.3 Required test result . 16
7.2 Extreme temperature tests . 16
7.2.1 Test of the indoor unit . 16
7.2.1.1 Definition . 16
7.2.1.2 Test method . 17
7.2.1.3 Required test result . 17
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 302 194 V2.1.1 (2017-02)
7.2.2 Test of the outdoor unit . 17
7.2.2.1 Definition . 17
7.2.2.2 Test method . 17
7.2.2.3 Required test result . 18
7.3 Damp heat test . 18
7.3.1 Definition . 18
7.3.2 Test method . 18
7.3.3 Required test result . 18
7.4 Extreme power voltage and frequency test . 18
7.4.1 Definition . 18
7.4.2 Test method . 18
7.4.3 Required test result . 18
7.5 Extreme vibration test . 19
7.5.1 Definition . 19
7.5.2 Test method . 19
7.5.3 Required test result . 19
8 Operational, functional and technical requirements, methods of testing and required test results. 19
8.1 Operational and functional requirements . 19
8.1.1 Start-up time . 19
8.1.1.1 Definition . 19
8.1.1.2 Test method . 19
8.1.1.3 Required test result . 20
8.1.2 System sensitivity . 20
8.1.2.1 Definition . 20
8.1.2.2 Test method . 20
8.1.2.3 Required test result . 20
8.1.3 Gain dynamic range . 20
8.1.3.1 Definition . 20
8.1.3.2 Test method . 20
8.1.3.3 Required test result . 20
8.1.4 Minimum range . 21
8.1.4.1 Definition . 21
8.1.4.2 Test method . 21
8.1.4.3 Required test result . 21
8.1.5 Radial resolution capability . 21
8.1.5.1 Definition . 21
8.1.5.2 Test method . 21
8.1.5.3 Required test results . 21
8.1.6 Azimuthal resolution capability . 21
8.1.6.1 Definition . 21
8.1.6.2 Test method . 22
8.1.6.3 Required test results . 22
8.1.7 Range scales and fixed range rings . 22
8.1.7.1 Definition . 22
8.1.7.2 Test method . 22
8.1.7.3 Required test result . 22
8.1.8 Variable Range Marker (VRM) . 23
8.1.8.1 Definition . 23
8.1.8.2 Test method . 23
8.1.8.3 Required test result . 23
8.1.9 Heading line and radar picture azimuth angular error . 23
8.1.9.1 Definition . 23
8.1.9.2 Test method . 23
8.1.9.3 Required test result . 23
8.1.10 Bearing facilities and bearing scale . 24
8.1.10.1 Definition . 24
8.1.10.2 Test method . 24
8.1.10.3 Required test result . 24
8.1.11 Nautical information and navigation lines . 24
8.1.11.1 Definition . 24
8.1.11.2 Test method . 24
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 302 194 V2.1.1 (2017-02)
8.1.11.3 Required test result . 25
8.1.12 Facilities for suppressing sea and rain clutter . 25
8.1.12.1 Definition . 25
8.1.12.2 Test method . 25
8.1.12.3 Required test result . 25
8.1.13 Suppression of interference from other radars . 25
8.1.13.1 Definition . 25
8.1.13.2 Test method . 26
8.1.13.3 Required test result . 26
8.1.14 Compatibility with radar beacons . 26
8.1.14.1 Definition . 26
8.1.14.2 Test method . 26
8.1.14.3 Required test result . 26
8.2 Operation controls and indicators . 26
8.2.1 Directly accessible operation controls . 26
8.2.1.1 Definition . 26
8.2.1.2 Test method . 26
8.2.1.3 Required test result . 26
8.2.2 Brilliance controls . 27
8.2.2.1 Definition . 27
8.2.2.2 Test method . 27
8.2.2.3 Required test result . 27
8.2.3 Heading line on/off control (SHM) . 28
8.2.3.1 Definition . 28
8.2.3.2 Test method . 28
8.2.3.3 Required test result . 28
8.2.4 Frequency tuning control and indicator . 28
8.2.4.1 Definition . 28
8.2.4.2 Test method . 28
8.2.4.3 Required test result . 28
8.3 Display unit characteristics. 29
8.3.1 Display screen dimensions . 29
8.3.1.1 Definition . 29
8.3.1.2 Test method . 29
8.3.1.3 Required test result . 29
8.3.2 Display screen brilliance . 29
8.3.2.1 Definition . 29
8.3.2.2 Test method . 29
8.3.2.3 Required test result . 29
8.3.3 Display resolution . 30
8.3.3.1 Definition . 30
8.3.3.2 Test method . 30
8.3.3.3 Required test result . 30
8.3.4 Picture generation characteristics . 30
8.3.4.1 Definition . 30
8.3.4.2 Test method . 30
8.3.4.3 Required test result . 30
8.4 Radar picture characteristics. 30
8.4.1 Radar picture . 30
8.4.1.1 Definition . 30
8.4.1.2 Test method . 30
8.4.1.3 Required test result . 31
8.4.2 Effective diameter of the radar picture . 31
8.4.2.1 Definition . 31
8.4.2.2 Test method . 31
8.4.2.3 Required test
...
Final draft ETSI EN 302 194 V2.1.1 (2016-12)
HARMONISED EUROPEAN STANDARD
Navigation radar used on inland waterways;
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 302 194 V2.1.1 (2016-12)
Reference
REN/ERM-TG26-141
Keywords
harmonised standard, maritime, navigation,
radar, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 302 194 V2.1.1 (2016-12)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 10
3.3 Abbreviations . 11
4 General requirements . 11
4.1 Purpose of the radar equipment . 11
4.2 Construction and design . 11
4.3 Operating frequency range . 12
4.4 Operational controls . 12
4.5 Interfaces . 12
4.5.1 Fail safe design . 12
4.5.2 Display of data received via interfaces . 12
4.5.3 Operation of equipments connected via interfaces . 13
4.5.4 Interpretation and presentation of data delivered via interfaces. 13
4.6 Software . 13
4.6.1 Software performance . 13
4.6.2 Software protection . 13
4.7 Equipment labelling . 13
4.8 Operating and service manuals . 13
5 Testing for compliance with technical requirements . 14
5.1 Environmental conditions for testing . 14
5.2 Standard operating mode of the radar equipment . 14
6 General conditions of tests . 14
6.1 Normal test conditions . 14
6.1.1 Introduction. 14
6.1.2 Normal temperature and humidity . 15
6.1.3 Normal test power supply . 15
6.1.3.1 AC test power supply . 15
6.1.3.2 DC test power supply . 15
6.2 Extreme test conditions . 15
6.2.1 Extreme temperatures . 15
6.2.1.1 Indoor unit . 15
6.2.1.2 Outdoor unit . 15
6.2.2 Extreme power supply voltage test conditions . 16
6.2.3 Extreme vibration test conditions . 16
7 Procedures for tests under extreme conditions . 16
7.1 Performance check procedure . 16
7.1.1 Introduction. 16
7.1.2 Method . 16
7.1.3 Required test result . 16
7.2 Extreme temperature tests . 16
7.2.1 Test of the indoor unit . 16
7.2.1.1 Definition . 16
7.2.1.2 Test method . 17
7.2.1.3 Required test result . 17
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 302 194 V2.1.1 (2016-12)
7.2.2 Test of the outdoor unit . 17
7.2.2.1 Definition . 17
7.2.2.2 Test method . 17
7.2.2.3 Required test result . 18
7.3 Damp heat test . 18
7.3.1 Definition . 18
7.3.2 Test method . 18
7.3.3 Required test result . 18
7.4 Extreme power voltage and frequency test . 18
7.4.1 Definition . 18
7.4.2 Test method . 18
7.4.3 Required test result . 18
7.5 Extreme vibration test . 19
7.5.1 Definition . 19
7.5.2 Test method . 19
7.5.3 Required test result . 19
8 Operational, functional and technical requirements, methods of testing and required test results. 19
8.1 Operational and functional requirements . 19
8.1.1 Start-up time . 19
8.1.1.1 Definition . 19
8.1.1.2 Test method . 19
8.1.1.3 Required test result . 20
8.1.2 System sensitivity . 20
8.1.2.1 Definition . 20
8.1.2.2 Test method . 20
8.1.2.3 Required test result . 20
8.1.3 Gain dynamic range . 20
8.1.3.1 Definition . 20
8.1.3.2 Test method . 20
8.1.3.3 Required test result . 20
8.1.4 Minimum range . 21
8.1.4.1 Definition . 21
8.1.4.2 Test method . 21
8.1.4.3 Required test result . 21
8.1.5 Radial resolution capability . 21
8.1.5.1 Definition . 21
8.1.5.2 Test method . 21
8.1.5.3 Required test results . 21
8.1.6 Azimuthal resolution capability . 21
8.1.6.1 Definition . 21
8.1.6.2 Test method . 22
8.1.6.3 Required test results . 22
8.1.7 Range scales and fixed range rings . 22
8.1.7.1 Definition . 22
8.1.7.2 Test method . 22
8.1.7.3 Required test result . 22
8.1.8 Variable Range Marker (VRM) . 23
8.1.8.1 Definition . 23
8.1.8.2 Test method . 23
8.1.8.3 Required test result . 23
8.1.9 Heading line and radar picture azimuth angular error . 23
8.1.9.1 Definition . 23
8.1.9.2 Test method . 23
8.1.9.3 Required test result . 23
8.1.10 Bearing facilities and bearing scale . 24
8.1.10.1 Definition . 24
8.1.10.2 Test method . 24
8.1.10.3 Required test result . 24
8.1.11 Nautical information and navigation lines . 24
8.1.11.1 Definition . 24
8.1.11.2 Test method . 24
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 302 194 V2.1.1 (2016-12)
8.1.11.3 Required test result . 25
8.1.12 Facilities for suppressing sea and rain clutter . 25
8.1.12.1 Definition . 25
8.1.12.2 Test method . 25
8.1.12.3 Required test result . 25
8.1.13 Suppression of interference from other radars . 25
8.1.13.1 Definition . 25
8.1.13.2 Test method . 26
8.1.13.3 Required test result . 26
8.1.14 Compatibility with radar beacons . 26
8.1.14.1 Definition . 26
8.1.14.2 Test method . 26
8.1.14.3 Required test result . 26
8.2 Operation controls and indicators . 26
8.2.1 Directly accessible operation controls . 26
8.2.1.1 Definition . 26
8.2.1.2 Test method . 26
8.2.1.3 Required test result . 27
8.2.2 Brilliance controls . 27
8.2.2.1 Definition . 27
8.2.2.2 Test method . 27
8.2.2.3 Required test result . 28
8.2.3 Heading line on/off control (SHM) . 28
8.2.3.1 Definition . 28
8.2.3.2 Test method . 28
8.2.3.3 Required test result . 28
8.2.4 Frequency tuning control and indicator . 28
8.2.4.1 Definition . 28
8.2.4.2 Test method . 29
8.2.4.3 Required test result . 29
8.3 Display unit characteristics. 29
8.3.1 Display screen dimensions . 29
8.3.1.1 Definition . 29
8.3.1.2 Test method . 29
8.3.1.3 Required test result . 29
8.3.2 Display screen brilliance . 29
8.3.2.1 Definition . 29
8.3.2.2 Test method . 29
8.3.2.3 Required test result . 30
8.3.3 Display resolution . 30
8.3.3.1 Definition . 30
8.3.3.2 Test method . 30
8.3.3.3 Required test result . 30
8.3.4 Picture generation characteristics . 30
8.3.4.1 Definition . 30
8.3.4.2 Test method . 30
8.3.4.3 Required test result . 30
8.4 Radar picture characteristics. 31
8.4.1 Radar picture . 31
8.4.1.1 Definition . 31
8.4.1.2 Test method . 31
8.4.1.3 Required test result . 31
8.4.2 Effective diameter of the radar picture . 31
8.4.2.1 Definition . 31
8.4.2.2 Test method .
...
Draft ETSI EN 302 194 V2.1.0 (2016-05)
HARMONISED EUROPEAN STANDARD
Navigation radar used on inland waterways;
Harmonised Standard covering the essential requirements of
article 3.2 of the Directive 2014/53/EU
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 194 V2.1.0 (2016-05)
Reference
REN/ERM-TG26-141
Keywords
Harmonised standard, maritime, navigation,
radar, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 194 V2.1.0 (2016-05)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 10
3.3 Abbreviations . 11
4 General requirements . 11
4.1 Purpose of the radar equipment . 11
4.2 Construction and design . 11
4.3 Operating frequency range . 11
4.4 Operational controls . 12
4.5 Interfaces . 12
4.5.1 Fail safe design . 12
4.5.2 Display of data received via interfaces . 12
4.5.3 Operation of equipments connected via interfaces . 12
4.5.4 Interpretation and presentation of data delivered via interfaces. 12
4.6 Software . 13
4.6.1 Software performance . 13
4.6.2 Software protection . 13
4.7 Equipment labelling . 13
4.8 Operating and service manuals . 13
5 Testing for compliance with technical requirements . 13
5.1 Environmental conditions for testing . 13
5.2 Standard operating mode of the radar equipment . 14
6 General conditions of tests . 14
6.1 Normal test conditions . 14
6.1.1 Introduction. 14
6.1.2 Normal temperature and humidity . 14
6.1.3 Normal test power supply . 15
6.1.3.1 AC test power supply . 15
6.1.3.2 DC test power supply . 15
6.2 Extreme test conditions . 15
6.2.1 Extreme temperatures . 15
6.2.1.1 Indoor unit . 15
6.2.1.2 Outdoor unit . 15
6.2.2 Extreme power supply voltage test conditions . 15
6.2.3 Extreme vibration test conditions . 15
7 Procedures for tests under extreme conditions . 16
7.1 Performance check procedure . 16
7.1.1 Introduction. 16
7.1.2 Method . 16
7.1.3 Required test result . 16
7.2 Extreme temperature tests . 16
7.2.1 Test of the indoor unit . 16
7.2.1.1 Definition . 16
7.2.1.2 Test method . 16
7.2.1.3 Required test result . 16
7.2.2 Test of the outdoor unit . 17
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 194 V2.1.0 (2016-05)
7.2.2.1 Definition . 17
7.2.2.2 Test method . 17
7.2.2.3 Required test result . 17
7.3 Damp heat test . 17
7.3.1 Definition . 17
7.3.2 Test method . 17
7.3.3 Required test result . 17
7.4 Extreme power voltage and frequency test . 18
7.4.1 Definition . 18
7.4.2 Test method . 18
7.4.3 Required test result . 18
7.5 Extreme vibration test . 18
7.5.1 Definition . 18
7.5.2 Test method . 18
7.5.3 Required test result . 18
8 Operational, functional and technical requirements, methods of testing and required test results. 19
8.1 Operational and functional requirements . 19
8.1.1 Start up time . 19
8.1.1.1 Definition . 19
8.1.1.2 Test method . 19
8.1.1.3 Required test result . 19
8.1.2 System sensitivity . 19
8.1.2.1 Definition . 19
8.1.2.2 Test method . 19
8.1.2.3 Required test result . 19
8.1.3 Gain dynamic range . 19
8.1.3.1 Definition . 19
8.1.3.2 Test method . 20
8.1.3.3 Required test result . 20
8.1.4 Minimum range . 20
8.1.4.1 Definition . 20
8.1.4.2 Test method . 20
8.1.4.3 Required test result . 20
8.1.5 Radial resolution capability . 20
8.1.5.1 Definition . 20
8.1.5.2 Test method . 20
8.1.5.3 Required test results . 21
8.1.6 Azimuthal resolution capability . 21
8.1.6.1 Definition . 21
8.1.6.2 Test method . 21
8.1.6.3 Required test results . 21
8.1.7 Range scales and fixed range rings . 21
8.1.7.1 Definition . 21
8.1.7.2 Test method . 21
8.1.7.3 Required test result . 21
8.1.8 Variable Range Marker (VRM) . 22
8.1.8.1 Definition . 22
8.1.8.2 Test method . 22
8.1.8.3 Required test result . 22
8.1.9 Heading line and radar picture azimuth angular error . 22
8.1.9.1 Definition . 22
8.1.9.2 Test method . 22
8.1.9.3 Required test result . 23
8.1.10 Bearing facilities and bearing scale . 23
8.1.10.1 Definition . 23
8.1.10.2 Test method . 23
8.1.10.3 Required test result . 23
8.1.11 Nautical information and navigation lines . 23
8.1.11.1 Definition . 23
8.1.11.2 Test method . 24
8.1.11.3 Required test result . 24
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 302 194 V2.1.0 (2016-05)
8.1.12 Facilities for suppressing sea and rain clutter . 24
8.1.12.1 Definition . 24
8.1.12.2 Test method . 24
8.1.12.3 Required test result . 24
8.1.13 Suppression of interference from other radars . 24
8.1.13.1 Definition . 24
8.1.13.2 Test method . 25
8.1.13.3 Required test result . 25
8.1.14 Compatibility with radar beacons . 25
8.1.14.1 Definition . 25
8.1.14.2 Test method . 25
8.1.14.3 Required test result . 25
8.2 Operation controls and indicators . 25
8.2.1 Directly accessible operation controls . 25
8.2.1.1 Definition . 25
8.2.1.2 Test method . 25
8.2.1.3 Required test result . 25
8.2.2 Brilliance controls . 26
8.2.2.1 Definition . 26
8.2.2.2 Test method . 26
8.2.2.3 Required test result . 26
8.2.3 Heading line on/off control (SHM) . 27
8.2.3.1 Definition . 27
8.2.3.2 Test method . 27
8.2.3.3 Required test result . 27
8.2.4 Frequency tuning control and indicator . 27
8.2.4.1 Definition . 27
8.2.4.2 Test method . 27
8.2.4.3 Required test result . 27
8.3 Display unit characteristics. 27
8.3.1 Display screen dimensions . 27
8.3.1.1 Definition . 27
8.3.1.2 Test method . 27
8.3.1.3 Required test result . 28
8.3.2 Display screen brilliance . 28
8.3.2.1 Definition . 28
8.3.2.2 Test method . 28
8.3.2.3 Required test result . 28
8.3.3 Display resolution . 28
8.3.3.1 Definition . 28
8.3.3.2 Test method . 28
8.3.3.3 Required test result . 28
8.3.4 Picture generation characteristics . 28
8.3.4.1 Definition . 28
8.3.4.2 Test method . 29
8.3.4.3 Required test result . 29
8.4 Radar picture characteristics. 29
8.4.1 Radar picture . 29
8.4.1.1 Definition . 29
8.4.1.2 Test method . 29
8.4.1.3 Required test result . 29
8.4.2 Effective diameter of the radar picture . 29
8.4.2.1 Definition . 29
8.4.2.2 Test method .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.