ETSI ETS 300 210-2 ed.1 (1996-02)
Integrated Services Digital Network (ISDN); Freephone (FPH) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Integrated Services Digital Network (ISDN); Freephone (FPH) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
DE/SPS-05028-P
Digitalno omrežje z integriranimi storitvami (ISDN) - Dopolnilna storitev: brezplačni telefonski klic (FPH) - Protokol digitalne naročniške signalizacije št. 1 (DSS1) - 2. del: Izjava o skladnosti izvedbe protokola (PICS) - Proformna specifikacija
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ETS 300 210-2:1996
01-GHFHPEHU-1996
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL ,6'1 'RSROQLOQDVWRULWHY EUH]SODþQL
WHOHIRQVNLNOLF )3+ 3URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMHãW '66
GHO ,]MDYDRVNODGQRVWLL]YHGEHSURWRNROD 3,&6 3URIRUPQDVSHFLILNDFLMD
Integrated Services Digital Network (ISDN); Freephone (FPH) supplementary service;
Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol
Implementation Conformance Statement (PICS) proforma specification
Ta slovenski standard je istoveten z: ETS 300 210-2 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST ETS 300 210-2:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
PSIST ETS 300 210-2:1996
---------------------- Page: 2 ----------------------
PSIST ETS 300 210-2:1996
EUROPEAN ETS 300 210-2
TELECOMMUNICATION February 1996
STANDARD
Source: ETSI TC-SPS Reference: DE/SPS-05028-P
ICS: 33.080
ISDN, supplementary service, PICS
Key words:
Integrated Services Digital Network (ISDN);
Freephone (FPH) supplementary service;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 2: Protocol Implementation Conformance Statement (PICS)
proforma specification
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
*
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.
---------------------- Page: 3 ----------------------
PSIST ETS 300 210-2:1996
Page 2
ETS 300 210-2: February 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
---------------------- Page: 4 ----------------------
PSIST ETS 300 210-2:1996
Page 3
ETS 300 210-2: February 1996
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions.8
4 Symbols and abbreviations .8
5 Conformance.9
Annex A (normative): PICS proforma.10
A.1 Instructions for completing the PICS proforma .10
A.1.1 Identification of the implementation .10
A.1.2 Global statement of conformance.10
A.1.3 Explanation of PICS proforma subclauses .10
A.1.4 Symbols, abbreviations and terms.11
A.2 Identification of the implementation.11
A.2.1 Implementation Under Test (IUT) identification .11
A.2.2 System Under Test (SUT) identification .11
A.2.3 Product supplier.12
A.2.4 Client.12
A.2.5 PICS contact person.13
A.3 PICS/System Conformance Statement (SCS).13
A.4 Identification of the protocol .13
A.5 Global statement of conformance .14
A.6 Roles .14
A.7 User.15
A.7.1 Major capabilities .15
A.7.2 Subsidiary capabilities.15
A.7.3 Protocol data units .15
A.7.4 Protocol data unit parameters.15
A.7.5 Timers.16
A.7.6 Call states .16
A.8 Network .16
A.8.1 Major capabilities .16
A.8.2 Subsidiary capabilities.16
A.8.3 Protocol data units .16
A.8.4 Protocol data unit parameters.17
A.8.5 Timers.18
A.8.6 Call states .18
---------------------- Page: 5 ----------------------
PSIST ETS 300 210-2:1996
Page 4
ETS 300 210-2: February 1996
Annex B (normative): Requirements list . 19
B.1 User . 19
B.1.1 Requirements on items used in the basic call PICS . 19
B.1.2 Requirements on items used in the generic functional protocol PICS . 19
B.1.3 Requirements on items used in the supplementary service interactions PICS. 20
B.2 Network. 20
B.2.1 Requirements on items used in the basic call PICS . 20
B.2.2 Requirements on items used in the generic functional protocol PICS . 20
B.2.3 Requirements on items used in the supplementary service interactions PICS. 21
History. 22
---------------------- Page: 6 ----------------------
PSIST ETS 300 210-2:1996
Page 5
ETS 300 210-2: February 1996
Foreword
This European Telecommunication Standard (ETS) has been produced by the Signalling Protocols and
Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. one
(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) Freephone (FPH)
supplementary service, as described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing
(PIXIT) proforma specification for the user";
Part 5: "TSS&TP specification for the network";
Part 6: "ATS and partial PIXIT proforma specification for the network".
To evaluate conformance of a particular implementation, it is necessary to have a statement of which
capabilities and options have been implemented for a given Open Systems Interconnection (OSI)
protocol. Such a statement is called a Protocol Implementation Conformance Statement (PICS).
Transposition dates
Date of adoption of this ETS: 1 March 1996
Date of latest announcement of this ETS (doa): 31 May 1996
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 30 November 1996
Date of withdrawal of any conflicting National Standard (dow): 30 November 1996
---------------------- Page: 7 ----------------------
PSIST ETS 300 210-2:1996
Page 6
ETS 300 210-2: February 1996
Blank page
---------------------- Page: 8 ----------------------
PSIST ETS 300 210-2:1996
Page 7
ETS 300 210-2: February 1996
1 Scope
This second part of ETS 300 210 is applicable to the stage three of the Freephone (FPH) supplementary
service for the pan-European Integrated Services Digital Network (ISDN) as provided by European public
telecommunications operators at the T reference point or coincident S and T reference point (as defined in
ITU-T Recommendation I.411 [12]) by means of the Digital Subscriber Signalling System No. one (DSS1)
protocol. Stage three identifies the protocol procedures and switching functions needed to support a
telecommunication service (see CCITT Recommendation I.130 [11]).
This ETS provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISDN
DSS1 FPH supplementary service protocol as specified in ETS 300 210-1 [6] in compliance with the
relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [10].
The supplier of a protocol implementation which is claimed to conform to ETS 300 210-1 [6] is required to
complete a copy of the PICS proforma provided in annex A of this ETS and is required to provide the
information necessary to identify both the supplier and the implementation.
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-network
interface layer 3; Specifications for basic call control".
[2] ETS 300 195-1 (1995): "Integrated Services Digital Network (ISDN);
Supplementary service interactions; Digital Subscriber Signalling System No.
one (DSS1) protocol; Part 1: Protocol specification".
[3] ETS 300 195-2: "Integrated Services Digital Network (ISDN); Supplementary
service interactions; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 2: Protocol Implementation Conformance Statement (PICS)
proforma specification".
[4] ETS 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional
protocol for the support of supplementary services; Digital Subscriber Signalling
System No. one (DSS1) protocol; Part 1: Protocol specification".
[5] ETS 300 196-2: "Integrated Services Digital Network (ISDN); Generic functional
protocol for the support of supplementary services; Digital Subscriber Signalling
System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance
Statement (PICS) proforma specification".
[6] ETS 300 210-1: "Integrated Services Digital Network (ISDN); Freephone (FPH)
supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[7] I-ETS 300 314: "Integrated Services Digital Network (ISDN); Digital Subscriber
Signalling System No. one (DSS1); Protocol Implementation Conformance
Statement (PICS) proforma specification for signalling network layer protocol for
circuit-mode basic call control (basic access, user)".
[8] I-ETS 300 315: "Integrated Services Digital Network (ISDN); Digital Subscriber
Signalling System No. one (DSS1); Protocol Implementation Conformance
Statement (PICS) proforma specification for signalling network layer protocol for
circuit-mode basic call control (primary rate access, user)".
[9] ISO/IEC 9646-1: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 1: General concepts".
---------------------- Page: 9 ----------------------
PSIST ETS 300 210-2:1996
Page 8
ETS 300 210-2: February 1996
[10] ISO/IEC 9646-7: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 7: Implementation
Conformance Statements".
[11] CCITT Recommendation I.130 (1988): "Method for the characterization of
telecommunication services supported by an ISDN and network capabilities of
an ISDN".
[12] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -
Reference configurations".
3 Definitions
For the purposes of this ETS, the following definitions apply, in addition to those given in
ETS 300 210-1 [6]:
Protocol Implementation Conformance Statement (PICS): A statement made by the supplier of an
Open Systems Interconnection (OSI) implementation or system, stating which capabilities have been
implemented for a given OSI protocol (see ISO/IEC 9646-1 [9]).
PICS proforma: A document, in the form of a questionnaire, designed by the protocol specifier or
conformance test suite specifier, which when completed for an OSI implementation or system becomes
the PICS (see ISO/IEC 9646-1 [9]).
static conformance review: A review of the extent to which the static conformance requirements are met
by the IUT, accomplished by comparing the PICS with the static conformance requirements expressed in
the relevant standard(s) (see ISO/IEC 9646-1 [9]).
4 Symbols and abbreviations
For the purposes of this ETS, the following abbreviations apply:
AND Boolean "and"
C Conditional requirement (to be observed if the relevant conditions apply)
CS Call States
DSS1 Digital Subscriber Signalling System No. one
FPH Freephone
IET Information Elements Transmitted
ISDN Integrated Services Digital Network
IUT Implementation Under Test
M Mandatory requirement (to be observed in all cases)
MC Major Capabilities
MT Messages Transmitted
N/A Not applicable, not supported or the conditions for status are not met
No not supported
NOT Boolean "not"
O Option (may be selected to suit the implementation, provided that any
requirements applicable to the option are observed)
O.n Options, but support required for either at least one or only one of the options in
the group labelled with the same numeral "n"
OR Boolean "or"
OSI Open Systems Interconnection
PICS Protocol Implementation Conformance Statement
R Role
RL Requirements List
SCS System Conformance Statement
SUT System Under Test
TM Timers
Yes supported
---------------------- Page: 10 ----------------------
PSIST ETS 300 210-2:1996
Page 9
ETS 300 210-2: February 1996
5 Conformance
A PICS proforma which conforms to this PICS proforma specification shall be technically equivalent to
annex A, and shall preserve the numbering and ordering of the items in annex A.
A PICS which conforms to this PICS proforma specification shall:
a) describe an implementation which claims to conform to ETS 300 210-1 [6];
b) be a conforming ICS proforma which has been completed in accordance with the instructions for
completion given in clause A.1;
c) include the information necessary to uniquely identify both the supplier and the implementation.
---------------------- Page: 11 ----------------------
PSIST ETS 300 210-2:1996
Page 10
ETS 300 210-2: February 1996
Annex A (normative): PICS proforma
Notwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants that
users of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PICS.
A.1 Instructions for completing the PICS proforma
A.1.1 Identification of the implementation
Identification of the Implementation Under Test (IUT) and the system in which it resides (the System
Under Test (SUT)) should be filled in so as to provide as much detail as possible regarding version
numbers and configuration options.
The product supplier information and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the PICS should be named as the
contact person.
The SCS as defined in ISO/IEC 9646-1 [9] is a document supplied by the client or product supplier that
summarizes which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or other
standards are implemented and to which conformance is claimed. The PICS/SCS subclause should
describe the relationship of the PICS to the SCS.
A.1.2 Global statement of conformance
If the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completed
to facilitate selection of test cases for optional functions.
If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed,
and all non-supported mandatory capabilities should be identified and explained. Explanations may be
entered in the comments field at the bottom of each table or on attached sheets of paper.
A.1.3 Explanation of PICS proforma subclauses
The PICS proforma contains a Roles clause and thereafter is presented in two parts (for user and
network) with the following subclauses, as required:
- major capabilities;
- subsidiary capabilities;
- protocol data unit support;
- protocol data unit parameters;
- timers;
- call states.
The User clause shall only be completed for user implementations (including private network
implementations) while the Network clause shall only be completed for network implementations. The
Roles subclause shall be completed for all implementations.
The relationship between this PICS proforma and other related PICS proforma (e.g. the basic call PICS
proforma) is expressed in the Requirements List (RL) contained in annex B. This provides the additional
restrictions placed on the related proforma (different conditions, different status, etc.).
---------------------- Page: 12 ----------------------
PSIST ETS 300 210-2:1996
Page 11
ETS 300 210-2: February 1996
A.1.4 Symbols, abbreviations and terms
The PICS proforma contained in this annex is comprised of information in tabular form in accordance with
the guidelines presented in ISO/IEC 9646-7 [10].
The reference column contained in the tables gives reference to the appropriate part(s) of
ETS 300 210-1 [6] describing the particular item. Note, however, that a reference merely indicates the
place where the core of a description of an item can be found. Any additional information contained in
ETS 300 210-1 [6] has to be taken into account when making a statement about the conformance of that
particular item.
The following common notations, defined in ISO/IEC 9646-7 [10], are used for the status column:
M mandatory
O optional
N/A not applicable
O. for mutually exclusive or selectable options from a set
The following common notations, defined in ISO/IEC 9646-7 [10], are used for the support column:
Y for supported/implemented
N for not supported/not implemented
A.2 Identification of the implementation
A.2.1 Implementation Under Test (IUT) identification
IUT name:
.....
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.FLILNDFLMDIntegrated Services Digital Network (ISDN); Freephone (FPH) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:ETS 300 210-2 Edition 1PSIST ETS 300 210-2:1996en01-oktober-1996PSIST ETS 300 210-2:1996SLOVENSKI
STANDARD
PSIST ETS 300 210-2:1996
EUROPEANETS 300 210-2TELECOMMUNICATIONFebruary 1996STANDARDSource: ETSI TC-SPSReference: DE/SPS-05028-PICS:33.080Key words:ISDN, supplementary service, PICSIntegrated Services Digital Network (ISDN);Freephone (FPH) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS)proforma specificationETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1996. All rights reserved.PSIST ETS 300 210-2:1996
Page 2ETS 300 210-2: February 1996Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.PSIST ETS 300 210-2:1996
Page 3ETS 300 210-2: February 1996ContentsForeword.51Scope.72Normative references.73Definitions.84Symbols and abbreviations.85Conformance.9Annex A (normative):PICS proforma.10A.1Instructions for completing the PICS proforma.10A.1.1Identification of the implementation.10A.1.2Global statement of conformance.10A.1.3Explanation of PICS proforma subclauses.10A.1.4Symbols, abbreviations and terms.11A.2Identification of the implementation.11A.2.1Implementation Under Test (IUT) identification.11A.2.2System Under Test (SUT) identification.11A.2.3Product supplier.12A.2.4Client.12A.2.5PICS contact person.13A.3PICS/System Conformance Statement (SCS).13A.4Identification of the protocol.13A.5Global statement of conformance.14A.6Roles.14A.7User.15A.7.1Major capabilities.15A.7.2Subsidiary capabilities.15A.7.3Protocol data units.15A.7.4Protocol data unit parameters.15A.7.5Timers.16A.7.6Call states.16A.8Network.16A.8.1Major capabilities.16A.8.2Subsidiary capabilities.16A.8.3Protocol data units.16A.8.4Protocol data unit parameters.17A.8.5Timers.18A.8.6Call states.18PSIST ETS 300 210-2:1996
Page 4ETS 300 210-2: February 1996Annex B (normative):Requirements list.19B.1User.19B.1.1Requirements on items used in the basic call PICS.19B.1.2Requirements on items used in the generic functional protocol PICS.19B.1.3Requirements on items used in the supplementary service interactions PICS.20B.2Network.20B.2.1Requirements on items used in the basic call PICS.20B.2.2Requirements on items used in the generic functional protocol PICS.20B.2.3Requirements on items used in the supplementary service interactions PICS.21History.22PSIST ETS 300 210-2:1996
Page 5ETS 300 210-2: February 1996ForewordThis European Telecommunication Standard (ETS) has been produced by the Signalling Protocols andSwitching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).This ETS is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. one(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) Freephone (FPH)supplementary service, as described below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the user";Part 5:"TSS&TP specification for the network";Part 6:"ATS and partial PIXIT proforma specification for the network".To evaluate conformance of a particular implementation, it is necessary to have a statement of whichcapabilities and options have been implemented for a given Open Systems Interconnection (OSI)protocol. Such a statement is called a Protocol Implementation Conformance Statement (PICS).Transposition datesDate of adoption of this ETS:1 March 1996Date of latest announcement of this ETS (doa):31 May 1996Date of latest publication of new National Standardor endorsement of this ETS (dop/e):30 November 1996Date of withdrawal of any conflicting National Standard (dow):30 November 1996PSIST ETS 300 210-2:1996
Page 6ETS 300 210-2: February 1996Blank pagePSIST ETS 300 210-2:1996
Page 7ETS 300 210-2: February 19961ScopeThis second part of ETS 300 210 is applicable to the stage three of the Freephone (FPH) supplementaryservice for the pan-European Integrated Services Digital Network (ISDN) as provided by European publictelecommunications operators at the T reference point or coincident S and T reference point (as defined inITU-T Recommendation I.411 [12]) by means of the Digital Subscriber Signalling System No. one (DSS1)protocol. Stage three identifies the protocol procedures and switching functions needed to support atelecommunication service (see CCITT Recommendation I.130 [11]).This ETS provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISDNDSS1 FPH supplementary service protocol as specified in ETS 300 210-1 [6] in compliance with therelevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [10].The supplier of a protocol implementation which is claimed to conform to ETS 300 210-1 [6] is required tocomplete a copy of the PICS proforma provided in annex A of this ETS and is required to provide theinformation necessary to identify both the supplier and the implementation.2Normative referencesThis ETS incorporates by dated and undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-networkinterface layer 3; Specifications for basic call control".[2]ETS 300 195-1 (1995): "Integrated Services Digital Network (ISDN);Supplementary service interactions; Digital Subscriber Signalling System No.one (DSS1) protocol; Part 1: Protocol specification".[3]ETS 300 195-2: "Integrated Services Digital Network (ISDN); Supplementaryservice interactions; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 2: Protocol Implementation Conformance Statement (PICS)proforma specification".[4]ETS 300 196-1: "Integrated Services Digital Network (ISDN); Generic functionalprotocol for the support of supplementary services; Digital Subscriber SignallingSystem No. one (DSS1) protocol; Part 1: Protocol specification".[5]ETS 300 196-2: "Integrated Services Digital Network (ISDN); Generic functionalprotocol for the support of supplementary services; Digital Subscriber SignallingSystem No. one (DSS1) protocol; Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification".[6]ETS 300 210-1: "Integrated Services Digital Network (ISDN); Freephone (FPH)supplementary service; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 1: Protocol specification".[7]I-ETS 300 314: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1); Protocol Implementation ConformanceStatement (PICS) proforma specification for signalling network layer protocol forcircuit-mode basic call control (basic access, user)".[8]I-ETS 300 315: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1); Protocol Implementation ConformanceStatement (PICS) proforma specification for signalling network layer protocol forcircuit-mode basic call control (primary rate access, user)".[9]ISO/IEC 9646-1: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 1: General concepts".PSIST ETS 300 210-2:1996
Page 8ETS 300 210-2: February 1996[10]ISO/IEC 9646-7: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 7: ImplementationConformance Statements".[11]CCITT Recommendation I.130 (1988): "Method for the characterization oftelecommunication services supported by an ISDN and network capabilities ofan ISDN".[12]ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -Reference configurations".3DefinitionsFor the purposes of this ETS, the following definitions apply, in addition to those given inETS 300 210-1 [6]:Protocol Implementation Conformance Statement (PICS): A statement made by the supplier of anOpen Systems Interconnection (OSI) implementation or system, stating which capabilities have beenimplemented for a given OSI protocol (see ISO/IEC 9646-1 [9]).PICS proforma: A document, in the form of a questionnaire, designed by the protocol specifier orconformance test suite specifier, which when completed for an OSI implementation or system becomesthe PICS (see ISO/IEC 9646-1 [9]).static conformance review: A review of the extent to which the static conformance requirements are metby the IUT, accomplished by comparing the PICS with the static conformance requirements expressed inthe relevant standard(s) (see ISO/IEC 9646-1 [9]).4Symbols and abbreviationsFor the purposes of this ETS, the following abbreviations apply:ANDBoolean "and"CConditional requirement (to be observed if the relevant conditions apply)CSCall StatesDSS1Digital Subscriber Signalling System No. oneFPHFreephoneIETInformation Elements TransmittedISDNIntegrated Services Digital NetworkIUTImplementation Under TestMMandatory requirement (to be observed in all cases)MCMajor CapabilitiesMTMessages TransmittedN/ANot applicable, not supported or the conditions for status are not metNonot supportedNOTBoolean "not"OOption (may be selected to suit the implementation, provided that anyrequirements applicable to the option are observed)O.nOptions, but support required for either at least one or only one of the options inthe group labelled with the same numeral "n"ORBoolean "or"OSIOpen Systems InterconnectionPICSProtocol Implementation Conformance StatementRRoleRLRequirements ListSCSSystem Conformance StatementSUTSystem Under TestTMTimersYessupportedPSIST ETS 300 210-2:1996
Page 9ETS 300 210-2: February 19965ConformanceA PICS proforma which conforms to this PICS proforma specification shall be technically equivalent toannex A, and shall preserve the numbering and ordering of the items in annex A.A PICS which conforms to this PICS proforma specification shall:a)describe an implementation which claims to conform to ETS 300 210-1 [6];b)be a conforming ICS proforma which has been completed in accordance with the instructions forcompletion given in clause A.1;c)include the information necessary to uniquely identify both the supplier and the
implementation.PSIST ETS 300 210-2:1996
Page 10ETS 300 210-2: February 1996Annex A (normative):PICS proformaNotwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants thatusers of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for itsintended purposes and may further publish the completed PICS.A.1Instructions for completing the PICS proformaA.1.1Identification of the implementationIdentification of the Implementation Under Test (IUT) and the system in which it resides (the SystemUnder Test (SUT)) should be filled in so as to provide as much detail as possible regarding versionnumbers and configuration options.The product supplier information and client information should both be filled in if they are different.A person who can answer queries regarding information supplied in the PICS should be named as thecontact person.The SCS as defined in ISO/IEC 9646-1 [9] is a document supplied by the client or product supplier thatsummarizes which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or otherstandards are implemented and to which conformance is claimed. The PICS/SCS subclause shoulddescribe the relationship of the PICS to the SCS.A.1.2Global statement of conformanceIf the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completedto facilitate selection of test cases for optional functions.If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed,and all non-supported mandatory capabilities should be identified and explained. Explanations may beentered in the comments field at the bottom of each table or on attached sheets of paper.A.1.3Explanation of PICS proforma subclausesThe PICS proforma contains a Roles clause and thereafter is presented in two parts (for user andnetwork) with the following subclauses, as required:-major capabilities;-subsidiary capabilities;-protocol data unit support;-protocol data unit parameters;-timers;-call states.The User clause shall only be completed for user implementations (including private networkimplementations) while the Network clause shall only be completed for network implementations. TheRoles subclause shall be completed for all implementations.The relationship between this PICS proforma and other related PICS proforma (e.g. the basic call PICSproforma) is expressed in the Requirements List (RL) contained in annex B. This provides the additionalrestrictions placed on the related proforma (different conditions, different status, etc.).PSIST ETS 300 210-2:1996
Page 11ETS 300 210-2: February 1996A.1.4Symbols, abbreviations and termsThe PICS proforma contained in this annex is comprised of information in tabular form in accordance withthe guidelines presented in ISO/IEC 9646-7 [10].The reference column contained in the tables gives reference to the appropriate part(s) ofETS 300 210-1 [6] describing the particular item. Note, however, that a reference merely indicates theplace where the core of a description of an item can be found. Any additional information contained inETS 300 210-1 [6] has to be taken into account when making a statement about the conformance of thatparticular item.The following common notations, defined in ISO/IEC 9646-7 [10], are used for the status column:MmandatoryOoptionalN/Anot applicableO.for mutually exclusive or selectable options from a setThe following common notations, defined in ISO/IEC 9646-7 [10], are used for the support column:Yfor supported/implementedNfor not supported/not implementedA.2Identification of the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.