ETSI TS 138 101-2 V15.8.0 (2020-01)
5G; NR; User Equipment (UE) radio transmission and reception; Part 2: Range 2 Standalone (3GPP TS 38.101-2 version 15.8.0 Release 15)
5G; NR; User Equipment (UE) radio transmission and reception; Part 2: Range 2 Standalone (3GPP TS 38.101-2 version 15.8.0 Release 15)
RTS/TSGR-0438101-2vf80
General Information
Standards Content (Sample)
ETSI TS 138 101-2 V15.8.0 (2020-01)
TECHNICAL SPECIFICATION
5G;
NR;
User Equipment (UE) radio transmission and reception;
Part 2: Range 2 Standalone
(3GPP TS 38.101-2 version 15.8.0 Release 15)
---------------------- Page: 1 ----------------------
3GPP TS 38.101-2 version 15.8.0 Release 15 1 ETSI TS 138 101-2 V15.8.0 (2020-01)
Reference
RTS/TSGR-0438101-2vf80
Keywords
5G
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3GPP TS 38.101-2 version 15.8.0 Release 15 2 ETSI TS 138 101-2 V15.8.0 (2020-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Legal Notice
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities. These shall be
interpreted as being references to the corresponding ETSI deliverables.
The cross reference between 3GPP and ETSI identities can be found under http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 3 ----------------------
3GPP TS 38.101-2 version 15.8.0 Release 15 3 ETSI TS 138 101-2 V15.8.0 (2020-01)
Contents
Intellectual Property Rights . 2
Legal Notice . 2
Modal verbs terminology . 2
Foreword . 10
1 Scope . 11
2 References . 11
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Symbols . 13
3.3 Abbreviations . 15
4 General . 16
4.1 Relationship between minimum requirements and test requirements . 16
4.2 Applicability of minimum requirements . 16
4.3 Specification suffix information . 16
5 Operating bands and channel arrangement . 17
5.1 General . 17
5.2 Operating bands . 17
5.2A Operating bands for CA . 17
5.2A.1 Intra-band CA . 17
5.2A.2 Void . 18
5.2D Operating bands for UL MIMO . 18
5.3 UE Channel bandwidth . 19
5.3.1 General . 19
5.3.2 Maximum transmission bandwidth configuration . 19
5.3.3 Minimum guardband and transmission bandwidth configuration . 20
5.3.4 RB alignment . 21
5.3A UE channel bandwidth for CA . 22
5.3A.1 General . 22
5.3A.2 Minimum guardband and transmission bandwidth configuration for CA . 22
5.3A.3 RB alignment with different numerologies for CA. 23
5.3A.4 UE channel bandwidth per operating band for CA . 23
5.3D Channel bandwidth for UL MIMO . 24
5.4 Channel arrangement . 24
5.4.1 Channel spacing . 24
5.4.1.1 Channel spacing for adjacent NR carriers . 24
5.4.2 Channel raster . 25
5.4.2.1 NR-ARFCN and channel raster. 25
5.4.2.2 Channel raster to resource element mapping. 25
5.4.2.3 Channel raster entries for each operating band . 26
5.4.3 Synchronization raster . 26
5.4.3.1 Synchronization raster and numbering . 26
5.4.3.2 Synchronization raster to synchronization block resource element mapping . 26
5.4.3.3 Synchronization raster entries for each operating band. 27
5.4A Channel arrangement for CA. 27
5.4A.1 Channel spacing for CA . 27
5.5 Configurations . 28
5.5A Configurations for CA . 28
5.5A.1 Configurations for intra-band contiguous CA. 28
5.5A.2 Configurations for intra-band non-contiguous CA . 29
5.5D Configurations for UL MIMO . 32
6 Transmitter characteristics . 33
6.1 General . 33
ETSI
---------------------- Page: 4 ----------------------
3GPP TS 38.101-2 version 15.8.0 Release 15 4 ETSI TS 138 101-2 V15.8.0 (2020-01)
6.2 Transmitter power . 33
6.2.1 UE maximum output power . 33
6.2.1.0 General . 33
6.2.1.1 UE maximum output power for power class 1 . 33
6.2.1.2 UE maximum output power for power class 2 . 34
6.2.1.3 UE maximum output power for power class 3 . 35
6.2.1.4 UE maximum output power for power class 4 . 36
6.2.2 UE maximum output power reduction . 37
6.2.2.1 UE maximum output power reduction for power class 1 . 37
6.2.2.2 UE maximum output power reduction for power class 2 . 38
6.2.2.3 UE maximum output power reduction for power class 3 . 39
6.2.2.4 UE maximum output power reduction for power class 4 . 39
6.2.3 UE maximum output power with additional requirements . 40
6.2.3.1 General . 40
6.2.3.2 A-MPR for NS_201 . 40
6.2.3.2.1 A-MPR for NS_201 for power class 1 . 40
6.2.3.2.2 A-MPR for NS_201 for power class 2 . 40
6.2.3.2.3 A-MPR for NS_201 for power class 3 . 41
6.2.3.2.4 A-MPR for NS_201 for power class 4 . 41
6.2.3.3 A-MPR for NS_202 . 41
6.2.3.3.1 A-MPR for NS_202 for power class 1 . 41
6.2.3.3.2 A-MPR for NS_202 for power class 2 . 41
6.2.3.3.3 A-MPR for NS_202 for power class 3 . 41
6.2.3.3.4 A-MPR for NS_202 for power class 4 . 41
6.2.4 Configured transmitted power . 41
6.2A Transmitter power for CA . 42
6.2A.1 UE maximum output power for CA . 42
6.2A.2 UE maximum output power reduction for CA . 43
6.2A.2.1 General . 43
6.2A.2.2 Maximum output power reduction for power class 1 . 43
6.2A.2.3 Maximum output power reduction for power class 2 . 44
6.2A.2.4 Maximum output power reduction for power class 3 . 44
6.2A.2.5 Maximum output power reduction for power class 4 . 45
6.2A.3 UE maximum output power with additional requirements for CA . 45
6.2A.3.1 General . 45
6.2A.3.2 A-MPR for CA_NS_201 . 46
6.2A.3.2.1 A-MPR for CA_NS_201 for power class 1 . 46
6.2A.3.2.2 A-MPR for CA_NS_201 for power class 2 . 46
6.2A.3.2.3 A-MPR for CA_NS_201 for power class 3 . 46
6.2A.3.2.4 A-MPR for CA_NS_201 for power class 4 . 47
6.2A.3.3 A-MPR for CA_NS_202 . 47
6.2A.3.3.1 A-MPR for CA_NS_202 for power class 1 . 47
6.2A.3.3.2 A-MPR for CA_NS_202 for power class 2 . 47
6.2A.3.3.3 A-MPR for CA_NS_202 for power class 3 . 47
6.2A.3.3.4 A-MPR for CA_NS_202 for power class 4 . 47
6.2A.4 Configured transmitted power for CA . 47
6.2D Transmitter power for UL MIMO . 48
6.2D.1 UE maximum output power for UL MIMO . 48
6.2D.1.1 UE maximum output power for UL MIMO for power class 1 . 48
6.2D.1.2 UE maximum output power for UL MIMO for power class 2 . 49
6.2D.1.3 UE maximum output power for UL MIMO for power class 3 . 50
6.2D.1.4 UE maximum output power for UL MIMO for power class 4 . 50
6.2D.2 UE maximum output power reduction for modulation / channel bandwidth for UL MIMO . 51
6.2D.2.1 UE maximum output power reduction for modulation / channel bandwidth for UL MIMO for
power class 1 . 51
6.2D.2.2 UE maximum output power reduction for modulation / channel bandwidth for UL MIMO for
power class 2 . 52
6.2D.2.3 UE maximum output power reduction for modulation / channel bandwidth for UL MIMO for
power class 3 . 52
6.2D.2.4 UE maximum output power reduction for modulation / channel bandwidth for UL MIMO for
power class 4 . 52
6.2D.3 UE maximum output power reduction with additional requirements for UL MIMO . 52
ETSI
---------------------- Page: 5 ----------------------
3GPP TS 38.101-2 version 15.8.0 Release 15 5 ETSI TS 138 101-2 V15.8.0 (2020-01)
6.2D.3.1 UE maximum output power reduction with additional requirements for UL MIMO for power
class 1 . 52
6.2D.3.2 UE maximum output power reduction with additional requirements for UL MIMO for power
class 2 . 52
6.2D.3.3 UE maximum output power reduction with additional requirements for UL MIMO for power
class 3 . 52
6.2D.3.4 UE maximum output power reduction with additional requirements for UL MIMO for power
class 4 . 53
6.2D.4 Configured transmitted power for UL MIMO . 53
6.3 Output power dynamics . 53
6.3.1 Minimum output power . 53
6.3.1.0 General . 53
6.3.1.1 Minimum output power for power class 1 . 53
6.3.1.2 Minimum output power for power class 2, 3, and 4 . 53
6.3.2 Transmit OFF power . 53
6.3.3 Transmit ON/OFF time mask . 54
6.3.3.1 General . 54
6.3.3.2 General ON/OFF time mask . 54
6.3.3.3 Transmit power time mask for slot and short or long subslot boundaries . 55
6.3.3.4 PRACH time mask . 55
6.3.3.5 Void. 56
6.3.3.6 SRS time mask . 56
6.3.3.7 PUSCH-PUCCH and PUSCH-SRS time masks . 57
6.3.3.8 Transmit power time mask for consecutive slot or long subslot transmission and short subslot
transmission boundaries . 57
6.3.3.9 Transmit power time mask for consecutive short subslot transmissions boundaries . 58
6.3.4 Power control . 59
6.3.4.1 General . 59
6.3.4.2 Absolute power tolerance . 59
6.3.4.3 Relative power tolerance . 59
6.3.4.4 Aggregate power tolerance. 60
6.3A Output power dynamics for CA . 60
6.3A.1 Minimum output power for CA . 60
6.3A.1.0 General . 60
6.3A.1.1 Minimum output power for power class 1 . 61
6.3A.1.2 Minimum output power for power class 2, 3, and 4 . 61
6.3A.2 Transmit OFF power for CA. 61
6.3A.3 Transmit ON/OFF time mask for CA . 61
6.3A.4 Power control for CA . 62
6.3A.4.1 General . 62
6.3D Output power dynamics for UL MIMO . 63
6.3D.1 Minimum output power for UL MIMO . 63
6.3D.1.1 Minimum output power for UL MIMO for power class 1 . 63
6.3D.1.2 Minimum output power for UL MIMO for power class 2, 3 and 4. 63
6.3D.2 Transmit OFF power for UL MIMO. 63
6.3D.3 Transmit ON/OFF time mask for UL MIMO . 63
6.4 Transmit signal quality . 63
6.4.1 Frequency Error . 63
6.4.2 Transmit modulation quality . 63
6.4.2.0 General . 63
6.4.2.1 Error vector magnitude . 64
6.4.2.2 Carrier leakage . 65
6.4.2.2.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.