ETSI ETS 300 175-6 ed.2 (1996-09)

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing

RE/RES-03027-6

Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Skupni vmesnik (CI) - 6. del: Identitete in naslavljanje

General Information

• Status: Published
• Publication Date: 19-Sep-1996
• Technical Committee: RES 3 - DECT
• Current Stage: 13 - TB decision to make document historical
• Completion Date: 28-Sep-2001
• Ref Project: SIST ETS 300 175-6:1999 - Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 175-6:1999
01-julij-1999
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH'(&76NXSQLYPHVQLN&,
GHO,GHQWLWHWHLQQDVODYOMDQMH
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6:
Identities and addressing
Ta slovenski standard je istoveten z: ETS 300 175-6 Edition 2
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST ETS 300 175-6:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 175-6:1999

---------------------- Page: 2 ----------------------

SIST ETS 300 175-6:1999
EUROPEAN ETS 300 175-6
TELECOMMUNICATION September 1996
STANDARD Second Edition
Source: ETSI TC-RES Reference: RE/RES-03027-6
ICS: 33.060, 33.060.50
Key words: DECT, radio
Radio Equipment and Systems (RES);
Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI);
Part 6: Identities and addressing
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 175-6:1999
Page 2
ETS 300 175-6: September 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 175-6:1999
Page 3
ETS 300 175-6: September 1996
Contents
Foreword .5
1 Scope.7
2 Normative references.8
3 Definitions and abbreviations .9
3.1 Definitions.9
3.2 Abbreviations .12
4 General description of FP and PP identities.13
4.1 Combinations of ARIs, PARKs and IPUIs .14
5 FP identities.14
5.1 ARI class A.17
5.2 ARI class B.17
5.3 ARI class C.18
5.4 ARI class D.19
5.5 ARl class E.20
5.6 SARI list structure .20
5.6.1 ARI list length.21
5.6.2 TARIs.21
5.6.3 Black.21
5.6.4 ARI.21
5.6.5 Black-ARI .21
5.6.6 TARI messages.22
5.6.6.1 Request message from the PP .22
5.6.6.2 Response message from the FP.22
6 PP identities.23
6.1 PARK.24
6.1.1 PARK A.24
6.1.2 PARK B.24
6.1.3 PARK C.25
6.1.4 PARK D.25
6.1.5 PARK E.25
6.2 IPUI.25
6.2.1 Portable user identity type N (residential/default).25
6.2.2 Portable user identity type S (PSTN/ISDN) .26
6.2.3 Portable user identity type O (private).26
6.2.4 Portable user identity type T (private extended) .26
6.2.5 Portable user identity type P (public/public access service).27
6.2.6 Portable user identity type Q (public/general).27
6.2.7 Portable user identity type U (public/general).27
6.2.8 Portable user identity type R (public/GSM).27
6.3 Individual and group TPUIs.28
6.3.1 General .28
6.3.2 Individual TPUI .29
6.3.3 Group TPUIs.30
7 Coding of identities .31
7.1 RFPI E-bit.31
7.2 Access rights codes .31
7.3 Portable user identity types.31

---------------------- Page: 5 ----------------------

SIST ETS 300 175-6:1999
Page 4
ETS 300 175-6: September 1996
7.4 EMC, EIC and POC.31
8 Rules for the usage of FP and PP identities .32
8.1 General principles.32
8.2 PARI, SARI and TARI usage.32
9 Connection related identities.34
9.1 MAC identities (see ETS 300 175-3 [3], subclause 11.7) .34
9.1.1 FMID.34
9.1.2 PMID.34
9.2 DLC identities (see ETS 300 175-4 [4], subclause 10.3.1).35
9.3 NWL identities (see ETS 300 175-5 [5]) .35
10 Equipment related identities.35
11 Subscription and registration procedures .35
Annex A (informative): Examples of usage of FP and PP identities.36
A.1 Residential ID usage.36
A.2 Public ID usage .36
A.2.1 Primary.36
A.2.2 Secondary .37
A.2.3 Tertiary.37
A.3 Private ID usage.37
A.3.1 Primary.37
A.3.2 Secondary .38
A.4 Mixed private and public ID usage.38
A.4.1 Public in private environments.38
A.4.2 Private in public environments.38
Annex B (normative): Identities and addressing timers .39
Annex C (normative): Representation of IPEI as printed text.40
Annex D (informative): Bibliography.41
History.42

---------------------- Page: 6 ----------------------

SIST ETS 300 175-6:1999
Page 5
ETS 300 175-6: September 1996
Foreword
This second edition European Telecommunication Standard (ETS) has been produced by the Radio
Equipment and Systems (RES) Technical Committee of the European Telecommunications Standards
Institute (ETSI).
Annexes B and C to this ETS are normative. Annexes A and D to this ETS is informative.
Further details of the DECT system may be found in the ETR 015, ETR 043 and ETR 056.
This ETS forms part 6 of a series of 9 laying down the arrangements for the Digital Enhanced Cordless
Telecommunications (DECT) Common Interface (CI).
Part 1: "Overview".
Part 2 "Physical layer (PHL)".
Part 3 "Medium Access Control (MAC) layer".
Part 4 "Data Link Control (DLC) layer".
Part 5: "Network (NWK) layer".
Part 6: "Identities and addressing".
Part 7: "Security features".
Part 8: "Speech coding and transmission".
Part 9: "Public Access Profile (PAP)".
Transposition dates
Date of adoption of this ETS: 6 September 1996
Date of latest announcement of this ETS (doa): 31 December 1996
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 30 June 1997
Date of withdrawal of any conflicting National Standard (dow): 30 June 1997

---------------------- Page: 7 ----------------------

SIST ETS 300 175-6:1999
Page 6
ETS 300 175-6: September 1996
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 175-6:1999
Page 7
ETS 300 175-6: September 1996
1 Scope
This second edition European Telecommunication Standard (ETS) specifies the identities and addressing
structure of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface. It is Part 6 of
a series of 9 parts.
There are four categories of identities to be used for identification and addressing in a general DECT
environment. These four categories are:
- Fixed Part (FP) identities;
- Portable Part (PP) identities;
- connection-related identities;
- equipment-related identities.
Fixed part identities and portable part identities are used for:
- access information from fixed parts to portable parts;
- access requests from portable parts;
- identification of portable parts;
- identification of fixed parts and radio fixed parts;
- paging;
- billing.
These identities support:
- different environments, such as residential, public or private;
- supply to manufacturers, installers, and operators of globally unique identity elements with a
minimum of central administration;
- multiple access rights for the same portable;
- large freedom for manufacturers, installers, and operators to structure the fixed part identities, e.g.
to facilitate provision of access rights to groups of DECT systems;
- roaming agreements between DECT networks run by the same or different owners/operators;
- indication of handover domains;
- indication of location areas, i.e. paging area;
- indication of subscription areas of a public service.
This ETS also provides for length indicators and other messages that can override the default location
and/or paging area and domain indications given by the structure of the identities.
Connection related identities are used to identify the protocol instances associated with a call and are used
for peer-to-peer communication.
Equipment related identities are used to identify a stolen PP and to derive a default identity coding for PP
emergency call set-up.
Coding of identity information elements for higher layer messages is found in ETS 300 175-5 [5],
subclause 7.7.
User authentication and ciphering need additional key information and is outside the scope of this ETS, but
is covered in other Parts of ETS 300 175 Parts 1 to 8 [1] to [8], e.g. Part 7.

---------------------- Page: 9 ----------------------

SIST ETS 300 175-6:1999
Page 8
ETS 300 175-6: September 1996
2 Normative references
This ETS incorporates, by dated or undated reference, provisions from other publications. These normative
references are cited at the appropriate places in the text and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this ETS
only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies.
[1] ETS 300 175-1 (1996): "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Part 1:
Overview".
[2] ETS 300 175-2 (1996): "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical
Layer (PHL)".
[3] ETS 300 175-3 (1996): "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium
Access Control (MAC) layer".
[4] ETS 300 175-4 (1996): "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data
Link Control (DLC) layer".
[5] ETS 300 175-5 (1996): "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network
(NWK) layer".
[6] ETS 300 175-7 (1996): "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security
features".
[7] ETS 300 175-8 (1996): "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech
coding and transmission".
[8] ETS 300 175-9 (1996): "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Part 9: Public
Access Profile (PAP)".
[9] CCITT Recommendation E.163 (1988): "Numbering Plan for the ISDN Era".
[10] CCITT Recommendation E.164 (1988): "Numbering Plan for the International
Telephone Service".
[11] ETS 300 523: "Numbering, addressing, and identification" (GSM 03.03).

---------------------- Page: 10 ----------------------

SIST ETS 300 175-6:1999
Page 9
ETS 300 175-6: September 1996
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this ETS, the following definitions apply:
Access Rights Class (ARC): This shows the type of access to a DECT network, such as public,
residential or private.
Access Rights Details (ARD): This is a unique number within one ARC.
Access Rights Identity (ARI): This is, to a service provider, a globally unique identity that shows the
access rights related to that service provider. The ARI consists of an ARC and an ARD. There are three
categories of ARIs:
- PARI = Primary ARI;
- SARI = Secondary ARI;
- TARI = Tertiary ARI.
attach: See ETS 300 175-1 [1].
authentication (of a subscriber): See ETS 300 175-1 [1].
bearer: See ETS 300 175-1 [1].
bearer handover: See ETS 300 175-1 [1].
cell: See ETS 300 175-1 [1].
Central Control Fixed Part (CCFP): See ETS 300 175-1 [1].
cluster: See ETS 300 175-1 [1].
connection: See ETS 300 175-1 [1].
connection handover: See ETS 300 175-1 [1].
Cordless Radio Fixed Part (CRFP): See ETS 300 175-1 [1].
coverage area: See ETS 300 175-1 [1].
DECT Network (DNW): See ETS 300 175-1 [1].
Data Link Control (DLC): Layer 2b of the DECT protocol stack.
external handover: See ETS 300 175-1 [1].
Fixed Part (DECT Fixed Part) (FP): See ETS 300 175-1 [1].
Fixed Radio Termination (FT): See ETS 300 175-1 [1].
frame: See ETS 300 175-1 [1].
geographically unique: See ETS 300 175-1 [1].
Global Network (GNW): See ETS 300 175-1 [1].
globally unique identity: See ETS 300 175-1 [1].

---------------------- Page: 11 ----------------------

SIST ETS 300 175-6:1999
Page 10
ETS 300 175-6: September 1996
handover: See ETS 300 175-1 [1].
intercell handover: See ETS 300 175-1 [1].
internal handover: See ETS 300 175-1 [1].
International Portable User Identity (IPUI): This is an identity that uniquely defines one user within the
domain defined by his access rights related to this IPUI. The IPUI consists of a Portable User Type (PUT)
and a Portable User Number (PUN).
NOTE 1: The IPUI may be locally unique or globally unique depending on type of PUT.
interoperability: See ETS 300 175-1 [1].
interoperator roaming: See ETS 300 175-1 [1].
intracell handover: See ETS 300 175-1 [1].
intraoperator roaming: See ETS 300 175-1 [1].
Local Network (LNW): See ETS 300 175-1 [1].
locally unique identity: See ETS 300 175-1 [1].
location area: See ETS 300 175-1 [1].
location registration: See ETS 300 175-1 [1].
Medium Access Control (MAC): Layer 2a of the DECT protocol stack.
multiframe: See ETS 300 175-1 [1].
network (telecommunication network): See ETS 300 175-1 [1].
operator (DECT operator): See ETS 300 175-1 [1].
paging: See ETS 300 175-1 [1].
paging area: See ETS 300 175-1 [1].
PARK Length Indicator (PLI): Associates a group of FP ARIs to the PARK, by indicating how many of
the first ARC + ARD bits are relevant. The rest have "don't care" status.
NOTE 2: The PLI is programmed into a PP as part of the subscription process.
Physical (PHL): Layer 1 of the DECT protocol stack.
Plain Old Telephone (Service) (POT(S)): The basic analogue telephony teleservice.
Primary Access Rights Identity (PARI): This is the most frequently transmitted ARI. Every DECT RFP
must transmit a PARI.
Portable Access Rights Key (PARK): This states the access rights for a PP.
Portable Handset (PHS): See ETS 300 175-1 [1].
Portable Part (DECT Portable Part) (PP): See ETS 300 175-1 [1].
Portable radio Termination (PT): See ETS 300 175-1 [1].

---------------------- Page: 12 ----------------------

SIST ETS 300 175-6:1999
Page 11
ETS 300 175-6: September 1996
Portable User Number (PUN): This is a globally or locally unique number within one PUT.
Portable User Type (PUT): This shows the numbering plan structure of a PUN.
private: See ETS 300 175-1 [1].
public: See ETS 300 175-1 [1].
Public Access Profile (PAP): See ETS 300 175-1 [1].
public access service: See ETS 300 175-1 [1].
radio end point: A physical grouping that contains one radio transceiver (transmitter/receiver), fixed or
portable.
Radio Fixed Part (RFP): See ETS 300 175-1 [1].
Radio Fixed Part Identity (RFPI): Every RFP frequently transmits this identity, that is geographically
unique. The RFPI shows:
- PARI;
- the RFPs local identity within that FP;
- domains for handover and location areas.
registration: An ambiguous term, that should always be qualified. See either location registration or
subscription registration.
Repeater Part (REP): See ETS 300 175-1 [1].
roaming: See ETS 300 175-1 [1].
roaming service: See ETS 300 175-1 [1].
Secondary Access Rights Identity (SARI): This is less frequently broadcast than the PARI.
service provider (telecommunications service provider): See ETS 300 175-1 [1].
Single Radio Fixed Part (SRFP): See ETS 300 175-1 [1].
subscriber (customer): See ETS 300 175-1 [1].
subscription registration: See ETS 300 175-1 [1].
Tertiary Access Rights Identity (TARI): This is not broadcast at all and is available as a Yes/No answer
upon a request including the wanted ARI.
TDMA frame: A time-division multiplex of 10 ms duration, containing 24 successive full slots. A TDMA
frame starts with the first bit period of full slot 0 and ends with the last bit period of full slot 23.
TPUI domain: See ETS 300 175-1 [1].
user (of a telecommunication network): See ETS 300 175-1 [1].
Wireless Relay Station (WRS): See ETS 300 175-1 [1].

---------------------- Page: 13 ----------------------

SIST ETS 300 175-6:1999
Page 12
ETS 300 175-6: September 1996
3.2 Abbreviations
For the purposes of this ETS the following abbreviations apply.
ACK Acknowledgement
ARC Access Rights Class
ARD Access Rights Details
ARI Access Rights Identity
BCD Binary Coded Decimal
CCFP Central Control Fixed Part. See definitions
CBI Collective Broadcast Identifier
CI Common Interface
CRFP Cordless Radio Fixed Part
DECT Digital Enhanced Cordless Telecommunications
DLC Data Link Control
DNW DECT Network
FMID Fixed Part MAC IDentity (MAC layer)
FP Fixed Part. See definitions
FT Fixed radio Termination
GNW Global Network
IPEI International Portable Equipment Identity
IPUI International Portable User Identity
ISDN Integrated Services Digital Network
LAL Location Area Level
LNW Local Network
MAC Medium Access Control.
NWK Network. Layer 3 of the DECT protocol stack
PARI Primary Access Rights Identity
PARK Portable Access Rights Key
PARK{y} PARK with value y for its park length indicator
PBX (PABX) Private (Automatic) Branch Exchange
PHL Physical
PHS Portable Handset
PLI Park Length Indicator
PMID Portable Part MAC Identity (MAC layer)
POT(S) Plain Old Telephone (Service)
PP Portable Part
PSPDN Packet Switched Public Data Network
PSTN Public Switched Telephone Network
PT Portable radio Termination
PTN Private Telecommunication Network
PUN Portable User Number
PUT Portable User Type
REP Repeater Part
RFP Radio Fixed Part
RFPI Radio Fixed Part Identity
RPN Radio fixed Part Number
SARI Secondary Access Rights Identity
TARI Tertiary Access Rights Identity
TDMA Time Division Multiple Access
TPUI Temporary Portable User Identity

---------------------- Page: 14 ----------------------

SIST ETS 300 175-6:1999
Page 13
ETS 300 175-6: September 1996
4 General description of FP and PP identities
Every radio FP broadcasts for its purpose a unique identity which contains a globally unique (to a service
provider) Access Rights Identity (ARI). Every PP has both a Portable Access Rights Key (PARK) and an
International Portable User Identity (IPUI). These operate as a pair. A PP is allowed to access any radio
FP which broadcasts an ARI that can be identified by any of the portable access rights keys of that PP.
The IPUI is used to identify the portable in the domain defined by its related ARI. The IPUI can either be
locally unique or globally unique.
The following figure illustrates the identity structure.
�‚¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶„‚¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶„���������‚¶¶¶¶¶¶¶¶¶¶„‚¶¶¶¶¶¶¶¶¶¶„
�•�$FFHVV�5LJKWV�&ODVV�••�$FFHVV�5LJKWV�’HWDLOV•���������•�3RUWDEOH�••�3RUWDEOH�•
�•��������$5&����������••���������$5’����������•���������•���8VHU���••���8VHU���•
�”¶¶¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶¶»”¶¶¶¶¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶»���������•���7\SH���••��1XPEHU��•
�����������”¶¶¶¶¶¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶¶»��������������������•���387����••���381����•
��������������‚¶¶¶¶¶¶¶¶¶¿¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶„��”¶¶¶¶¶�¶¶¶¶»”¶¶¶¶¶�¶¶¶¶»
�‚¶¶¶¶¶¶¶¶¶¶¶¶¿¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶„‚¶¶¶¶¶¶¶¶„���������•��������”¶¶¶¶¶�¶¶¶¶¶»
�•�����$FFHVV�5LJKWV�,GHQWLW\�����••�5DGLR��•���������•��������������•
�•��������������$5,���������������••�)L[HG��•���������•��������������•
�…¶¶¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶‰•��3DUW��•���������•��������������•
�•�3ULPDU\�•�6HFRQGDU\�•�7HUWLDU\�••�1XPEHU�•���������•��������������•
�•���3$5,��•����6$5,���•���7$5,���••��531���•���������•��������������•
�”¶¶¶¶¶�¶¶¶¿¶¶¶¶¶¶¶¶¶¶¶¿¶¶¶¶¶¶¶¶¶¶»”¶¶¶¶�¶¶¶»��‚¶¶¶¶¶¶¿¶¶¶¶¶„‚¶¶¶¶¶¶¶¿¶¶¶¶¶¶¶„
�������”¶¶¶¶¶¶¶¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶»������•��3RUWDEOH��••�,QWHUQDWLRQDO�•
�‚¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¿¶¶¶¶¶¶¶¶¶¶¶¶„�����������•���$FFHVV���••���3RUWDEOH����•
�•����5DGLR�)L[HG�3DUW�,GHQWLW\����•�����������•�5LJKWV�.H\�••�8VHU�,GHQWLW\�•
�•�������������53),����������������•�����������•����3$5.����••�����,38,������•
�”¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶»�����������”¶¶¶¶¶¶¶¶¶¶¶¶»”¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶»
���¶¶¶¶¶¶¶�)3�,GHQWLWLHV�¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶!�¶�¶�¶�¶�33�,GHQWLWLHV�¶�¶�¶�¶�¶�¶!
Figure 1: General identity structure
The common base for the DECT identity structure is the Access Rights Class (ARC) and Access Rights
Details (ARD). These must be known by both the FP and the PPs. In the FP the ARC and ARD are called
Access Rights Identity (ARI), and in the PP they are called Portable Access Rights Key (PARK). The
distinction between PARK and ARI is that each PARK can have a group of ARDs allocated, PARK{y}. "y"
is the value of the PARK length indicator given in the PP subscription process.
�����������������‚¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶„
�����������������•�$5&�•�����������$5’����������������������������•
�����������������…¶¶¶¶¶¿¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶‰
�����������������•������������\�ELWV�����������•��GRQ�W�FDUH��ELWV•
�����������������•�¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶!•�¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶!
Figure 2: Structure of PARK{y}
If the ARI is a primary ARI, i.e. PARI, it will form, together with a RFP number, the broadcast identity
RFPI. ARIs can also be less frequently broadcast as Secondary Access Rights Identities (SARIs) and may
also be available as Tertiary Access Rights Identities (TARIs), which are not broadcast, but are accessible
upon request.
The PUT and PUN form the PP user's identity, IPUI. This identity can either be globally unique or locally
unique. IPUIs can be replaced by temporary and shorter identities, TPUIs for paging.
A PP is identified by its pairs of PARK{y} and IPUI. A PP is only allowed to access a FP if one of its
PARKs includes one of the ARIs of the FP, i.e. the PARI, a SARI or a TARI.

---------------------- Page: 15 ----------------------

SIST ETS 300 175-6:1999
Page 14
ETS 300 175-6: September 1996
4.1 Combinations of ARIs, PARKs and IPUIs
DECT provides a flexible radio access technology for a large variety of private and public networks or
systems. This leads to different requirements on e.g. sub-system grouping, distribution and installation of
equipment, identity allocations and subscription.
Therefore five access rights classes A - E and a number of IPUIs have been defined to meet the need for
a differentiation in the identity structures.
The following table gives an overview of the combinations of the main identities. As described in
subclause 6.2 some flexibility is allowed in combinations of the IPUI types, e.g. IPUI type N could be used
by a service provider in combination with any ARC.
Table 1: Combinations of identities ARI, PARK and IPUI
‚¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶�¶¶¶¶¶¶¶�¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶„
•��$5,��•�(QYLURQPHQW������������•�6$5,��•�3$5.��•�,38,����•
•�FODVV�•������������������������•�7$5,��•�FODVV�•�W\SH����•
…¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶�¶¶¶¶¶¶¶�¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶‰
•�$�����•�5HVLGHQWLDO�DQG��������•�1R����•�$�����•�1�6�����•
•�������•�SULYDWH��3%;��VLQJOH���•�������•�������•���������•
•�������•�DQG�VPDOO�PXOWLSOH�����•�������•�������•���������•
•�������•�FHOO�V\VWHPV�����������•�������•�������•���������•
…¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶�¶¶¶¶¶¶¶�¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶‰
•�%�����•�3ULYDWH����������������•� •�������•��3$%;V��PXOWLSOH�FHOO��•�������•�������•���������•
…¶¶¶¶¶¶¶�¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶¶�¶¶¶¶¶¶¶�¶¶¶¶¶¶¶�¶¶
...