ETSI ETS 300 607-1 ed.5 (1997-09)

Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS) conformance specification; Part 1: Conformance specification (GSM 11.10-1 version 4.18.1)

RE/SMG-071110PR3-1

Digitalni celični telekomunikacijski sistem (faza 2) - Specifikacija skladnosti mobilne postaje (MS) - 1. del: Specifikacija skladnosti (GSM 11.10-1, različica 4.18.1)

General Information

• Status: Published
• Publication Date: 14-Sep-1997
• Technical Committee: SMG 7 - Mobile Station (MS) Testing
• Current Stage: 12 - Completion
• Due Date: 29-Aug-1997
• Completion Date: 15-Sep-1997
• Mandate: T-247
• Ref Project: SIST ETS 300 607-1 E5:2005 - Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS) conformance specification; Part 1: Conformance specification (GSM 11.10-1 version 4.18.1)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 607-1 E5:2005
01-februar-2005
'LJLWDOQLFHOLþQLWHOHNRPXQLNDFLMVNLVLVWHPID]D6SHFLILNDFLMDVNODGQRVWL
PRELOQHSRVWDMH06GHO6SHFLILNDFLMDVNODGQRVWL*60UD]OLþLFD

Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS)
conformance specification; Part 1: Conformance specification (GSM 11.10-1 version
4.18.1)
Ta slovenski standard je istoveten z: ETS 300 607-1 Edition 5
ICS:
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
SIST ETS 300 607-1 E5:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 607-1 E5:2005

---------------------- Page: 2 ----------------------

SIST ETS 300 607-1 E5:2005
EUROPEAN ETS 300 607-1
TELECOMMUNICATION September 1997
STANDARD Fifth Edition
Source: ETSI SMG Reference: RE/SMG-07111OPR3-1
ICS: 33.020
Key words: Digital cellular telecommunications system, Global System for Mobile Communication (GSM)
R
GLOBAL SYSTEM FOR
MOBILE COMMUNICATIONS
Digital cellular telecommunication system (Phase 2);
Mobile Station (MS) conformance specification;
Part 1: Conformance specification
(GSM 11.10-1 version 4.18.1)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 607-1 E5:2005
Page 2
ETS 300 607-1 (GSM 11.10-1 version 4.18.1): September 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Standards Approval Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 607-1 E5:2005
Page 3
ETS 300 607-1 (GSM 11.10-1 version 4.18.1): September 1997
Contents
Foreword .29
1 Scope .31
2 Normative references.31
3 Definitions, conventions, and applicability.37
3.1 Mobile station definition and configurations.37
3.2 Applicability .38
3.2.1 Applicability of this specification .38
3.2.2 Applicability of the individual tests .38
3.2.3 Applicability to terminal equipment.58
3.3 Definitions .58
3.4 Conventions for mathematical notations.59
3.4.1 Mathematical signs.59
3.4.2 Powers to the base 10.59
3.5 Conventions on electrical terms.59
3.5.1 Radio Frequency (RF) input signal level .59
3.5.2 Reference sensitivity level.59
3.5.3 Power level of fading signal.60
3.6 Terms on test conditions. 60
3.6.1 Radio test conditions .60
4 Test Equipment .60
4.1 Terms used to describe test equipment in this ETS.60
4.2 Functional requirements of test equipment.61
5 Testing methodology in general (layers 1, 2, and 3) .61
5.1 Testing of optional functions and procedures.61
5.2 Test interfaces and facilities .61
5.3 Different protocol layers.62
5.4 Information to be provided by the apparatus supplier.62
5.5 Definitions of transmit and receive times.62
6 Reference test methods.62
6.1 General .62
6.2 Choice of frequencies in the frequency hopping mode.62
6.3 "Ideal" radio conditions .63
6.4 Standard test signals. .63
6.5 Power (control) levels. .63
7 Implicit testing.63
8 Measurement uncertainty.63
9 Format of tests .64
10 Generic call set up procedures .64
10.1 Generic call set-up procedure for mobile terminating speech calls.64
10.1.1 Initial conditions.64
10.1.2 Definition of system information messages.65
10.1.3 Procedure.67
10.1.4 Specific message contents .68
10.2 Generic call set-up procedure for mobile originating speech calls .69
10.2.1 Initial conditions.69
10.2.2 Definition of system information messages.69

---------------------- Page: 5 ----------------------

SIST ETS 300 607-1 E5:2005
Page 4
ETS 300 607-1 (GSM 11.10-1 version 4.18.1): September 1997
10.2.3 Procedure . 70
10.2.4 Specific message contents. 70
10.3 Generic call set-up procedure for mobile terminating data calls . 72
10.3.1 Initial conditions . 72
10.3.2 Definition of system information messages. 72
10.3.3 Procedure . 73
10.3.4 Specific message contents. 73
10.4 Generic call set-up procedure for mobile originating data calls . 75
10.4.1 Initial conditions . 75
10.4.2 Definition of system information messages. 75
10.4.3 Procedure . 76
10.4.4 Specific message contents. 76
11 General tests . 79
11.1 Verification of support and non-support of services (multiple numbering scheme or
ISDN). 79
11.1.1 Mobile Terminated (MT) calls . 79
11.1.2 Mobile Originated (MO) calls . 80
11.2 Verification of support of the single numbering scheme . 81
11.3 Verification of non-support of services (Advice of Charge Charging (AoCC)) . 82
11.4 Verification of non-support of services (call hold) . 83
11.5 Verification of non-support of services (multiparty). 84
11.6 Verification of non-support of feature (Fixed Dialling Number (FDN)) . 85
11.7 IMEI Security . 86
11.8 Coding of the Bearer Capability information element. 87
11.8.1 Network to MS Direction. 88
11.8.1.1 BS 21 to 26 - Asynchronous Service . 88
11.8.1.1.1 BS 21. 88
11.8.1.1.2 BS 22. 92
11.8.1.1.3 BS 24. 92
11.8.1.1.4 BS 25. 92
11.8.1.1.5 BS 26. 92
11.8.1.1.6 BS 23. 92
11.8.1.2 BS 31 to 34 - Synchronous Service . 93
11.8.1.2.1 BS 32. 93
11.8.1.2.2 BS 31. 97
11.8.1.2.3 BS 33. 98
11.8.1.2.4 BS 34. 98
11.8.1.3 BS 61 - Alternate Speech / Data. 98
11.8.1.3.1 Speech/Asynchronous Data,
Transparent. 99
11.8.1.3.2 Speech/Asynchronous Data, Non
Transparent. 101
11.8.1.3.3 Speech/Synchronous Data. 103
11.8.1.4 BS 81 - Speech followed by Data . 104
11.8.1.4.1 Speech followed by Asynchronous
Data. 104
11.8.1.4.2 Speech followed by Synchronous
Data. 104
11.8.1.5 TS 61 - Alternate Speech / Facsimile group 3 . 104
11.8.1.5.1 TS 61 - Alternate Speech / Facsimile
group 3, Transparent. 105
11.8.1.5.2 TS 61 - Alternate Speech / Facsimile
group 3, Non-Transparent. 106
11.8.1.6 TS 62 - Automatic Facsimile group 3. 107
11.8.2 MS to SS direction . 107
11.8.2.1 BS 21 to 26 - Asynchronous Service . 107
11.8.2.1.1 BS 21. 108
11.8.2.1.2 BS 22. 112
11.8.2.1.3 BS 24. 112
11.8.2.1.4 BS 25. 112
11.8.2.1.5 BS 26. 112
11.8.2.1.6 BS 23. 112

---------------------- Page: 6 ----------------------

SIST ETS 300 607-1 E5:2005
Page 5
ETS 300 607-1 (GSM 11.10-1 version 4.18.1): September 1997
11.8.2.2 BS 31 to 34 - Synchronous Service.113
11.8.2.2.1 BS 32 .113
11.8.2.2.2 BS 31 .117
11.8.2.2.3 BS 33 .118
11.8.2.2.4 BS 34 .118
11.8.2.3 BS 41 to 46 - PAD Access Asynchronous.119
2)
11.8.2.3.1 BS 41 .119
11.8.2.3.2 BS 42 .120
11.8.2.3.3 BS 44 .121
11.8.2.3.4 BS 45 .121
11.8.2.3.5 BS 46 .121
11.8.2.3.6 BS 43 .121
11.8.2.4 BS 51 to 53 - Packet Service Synchronous.122
2)
11.8.2.4.1 BS 51 .122
11.8.2.4.2 BS 52 .122
11.8.2.4.3 BS 53 .122
11.8.2.5 BS 61 - Alternate Speech / Data.123
11.8.2.5.1 Speech/Asynchronous Data,
Transparent .123
11.8.2.5.2 Speech/Asynchronous Data, Non
Transparent .125
11.8.2.5.3 Speech/Synchronous Data .127
11.8.2.6 BS 81 - Speech followed by Data .128
11.8.2.6.1 Speech followed by Asynchronous
Data .128
11.8.2.6.2 Speech followed by Synchronous
Data .128
11.8.2.7 TS 61 - Alternate Speech / Facsimile group 3.128
11.8.2.7.1 TS 61 - Alternate Speech / Facsimile
group 3, Transparent .129
11.8.2.7.2 TS 61 - Alternate Speech / Facsimile
group 3, Non Transparent.130
11.8.2.8 TS 62 - Automatic Facsimile group 3 .131
12 Transceiver.132
12.1 Conducted spurious emissions.132
12.1.1 MS allocated a channel .132
12.1.2 MS in idle mode.133
12.2 Radiated spurious emissions.135
12.2.1 MS allocated a channel .135
12.2.2 MS in idle mode.137
13 Transmitter .140
13.1 Frequency error and phase error.140
13.2 Frequency error under multipath and interference conditions .143
13.3 Transmitter output power and burst timing .145
13.4 Output RF spectrum .152
13.5 Intermodulation attenuation .158
14 Receiver .160
14.1 Bad frame indication .165
14.1.1 Bad frame indication - TCH/FS .165
14.1.1.1 Bad frame indication - TCH/FS - Random RF input .165
14.1.1.2 Bad frame indication - TCH/FS - Frequency hopping and
downlink DTX .166
14.1.2 Bad frame indication - TCH/HS.168
14.1.2.1 Bad frame indication - TCH/HS - Random RF input.168
14.1.2.2 Bad frame indication - TCH/HS - Frequency hopping and
downlink DTX .169
14.1.3 Bad frame indication - TCH/FS - Frequency hopping and downlink DTX -
Phase 2 MS in a phase 1 network.170
14.1.4 Bad frame indication - TCH/HS - Frequency hopping and downlink DTX -
Phase 2 MS in a phase 1 network.172

---------------------- Page: 7 ----------------------

SIST ETS 300 607-1 E5:2005
Page 6
ETS 300 607-1 (GSM 11.10-1 version 4.18.1): September 1997
14.2 Reference sensitivity . 174
14.2.1 Reference sensitivity - TCH/FS . 174
14.2.2 Reference sensitivity - TCH/HS (Speech frames) . 176
14.2.3 Reference sensitivity - FACCH/F. 179
14.2.4 Reference sensitivity - FACCH/H . 180
14.2.5 Reference sensitivity - full rate data channels . 181
14.2.6 Reference sensitivity - half rate data channels. 182
14.3 Usable receiver input level range. 183
14.4 Co-channel rejection . 184
14.4.1 Co-channel rejection - TCH/FS. . 184
14.4.2 Co-channel rejection - TCH/HS . 186
14.4.3 Co-channel rejection - TCH/HS (SID frames) . 188
14.4.4 Co-channel rejection - FACCH/F. 190
14.4.5 Co-channel rejection - FACCH/H. 191
14.5 Adjacent channel rejection . 192
14.5.1 Adjacent channel rejection - speech channels . 192
14.5.2 Adjacent channel rejection - control channels . 194
14.6 Intermodulation rejection. 196
14.6.1 Intermodulation rejection - speech channels . 196
14.6.2 Intermodulation rejection - control channels. 198
14.7 Blocking and spurious response . 200
14.7.1 Blocking and spurious response - speech channels . 200
14.7.2 Blocking and spurious response - control channels . 203
14.8 AM suppression. 206
14.8.1 AM suppression - speech channels. 206
14.8.2 AM suppression - control channels. 207
15 Timing advance and absolute delay . 210
16 Reception time tracking speed . 212
17 Access times during handover . 214
17.1 Intra cell channel change . 214
17.2 Inter cell handover. 216
18 Temporary reception gaps. 219
19 Channel release after unrecoverable errors . 221
19.1 Channel release after unrecoverable errors - 1 . 221
19.2 Channel release after unrecoverable errors - 2 . 222
19.3 Channel release after unrecoverable errors - 3 . 223
20 Cell selection and reselection. 225
20.1 Cell selection. 226
20.2 Cell selection with varying signal strength values . 228
20.3 Basic cell reselection. 230
20.4 Cell reselection using TEMPORARY_OFFSET, CELL_RESELECT_OFFSET,
POWER_OFFSET and PENALTY_TIME parameters. 232
20.5 Cell reselection using parameters transmitted in the System Information type 2bis, type
2ter, type 7 and type 8 messages. . 234
20.5.5 Test Requirements . 235
20.6 Cell reselection timings . 236
20.6.1 Definition and applicability . 236
20.6.2 Conformance requirement. 236
20.6.3 Test purpose. 236
20.6.4 Method of test. 236
20.6.4.1 Initial conditions. 236
20.6.4.2 Procedure. 236
20.6.5 Test requirements. 237
20.7 Priority of cells . 237
20.7.4.2 Procedure. 238
20.7.5 Test requirements. 239
20.8 Cell reselection when C1 (serving cell) < 0 for 5 seconds . 239

---------------------- Page: 8 ----------------------

SIST ETS 300 607-1 E5:2005
Page 7
ETS 300 607-1 (GSM 11.10-1 version 4.18.1): September 1997
20.8.1 Definition and applicability .239
20.8.2 Conformance requirement .239
20.8.3 Test purpose .239
20.8.4 Method of test.239
20.8.4.1 Initial conditions .239
20.8.4.2 Procedure .239
20.8.5 Test requirements .240
20.9 Running average of the surrounding cell BCCH carrier signal levels .240
20.9.1 Definition and applicability .240
20.9.2 Conformance requirement .240
20.9.3 Test purpose .240
20.9.4 Method of test.240
20.9.4.1 Initial conditions .240
20.9.4.2 Procedure .241
20.9.5 Test requirements .241
20.10 Running average of the serving cell BCCH carrier signal level .241
20.10.1 Definition and applicability .241
20.10.2 Conformance requirement .241
20.10.3 Test purpose .241
20.10.4 Method of test.241
20.10.4.1 Initial conditions .241
20.10.4.2 Procedure .242
20.10.5 Test requirement .242
20.11 Updating the list of six strongest neighbour carriers and decoding the BCCH
information of a new carrier on the list.242
20.11.1 Definition and applicability .242
20.11.2 Conformance requirement .242
20.11.3 Test purpose .242
20.11.4 Method of test.242
20.11.4.1 Initial conditions .242
20.11.4.2 Procedure .243
20.11.5 Test requirements .243
20.12 Decoding the BCCH information of the neighbour carriers on the list of six strongest
neighbour carriers.243
20.12.1 Definition and applicability .243
20.12.2 Conformance requirement .243
20.12.3 Test purpose .
...