ETSI EN 301 141-2 V1.2.2 (1998-09)

Integrated Services Digital Network (ISDN); Narrowband Multi-service Delivery System (NMDS); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

DEN/SPS-09054-2

Digitalno omrežje z integriranimi storitvami (ISDN) – Ozkopasovni večstoritveni dostavni sistem (NMDS) – 2. del: Izjava o skladnosti izvedbe protokola (PICS) – Proforma specifikacija

General Information

• Status: Published
• Publication Date: 04-Oct-1998
• Technical Committee: SPS 9 - Access Networks and Service Node Interfaces
• Current Stage: 12 - Completion
• Due Date: 02-Oct-1998
• Completion Date: 05-Oct-1998
• Ref Project: SIST EN 301 141-2 V1.2.2:2005 - Integrated Services Digital Network (ISDN); Narrowband Multi-service Delivery System (NMDS); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 141-2 V1.2.2:2005
01-april-2005
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL,6'1±2]NRSDVRYQLYHþVWRULWYHQL
GRVWDYQLVLVWHP10'6±GHO,]MDYDRVNODGQRVWLL]YHGEHSURWRNROD3,&6±
3URIRUPDVSHFLILNDFLMD
Integrated Services Digital Network (ISDN); Narrowband Multi-service Delivery System
(NMDS); Part 2: Protocol Implementation Conformance Statement (PICS) proforma
specification
Ta slovenski standard je istoveten z: EN 301 141-2 Version 1.2.2
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST EN 301 141-2 V1.2.2:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 141-2 V1.2.2:2005

---------------------- Page: 2 ----------------------

SIST EN 301 141-2 V1.2.2:2005
EN 301 141-2 V1.2.2 (1998-09)
European Standard (Telecommunications series)
Integrated Services Digital Network (ISDN);
Narrowband Multi-service Delivery System (NMDS);
Part 2: Protocol Implementation Conformance
Statement (PICS) proforma specification

---------------------- Page: 3 ----------------------

SIST EN 301 141-2 V1.2.2:2005
2 EN 301 141-2 V1.2.2 (1998-09)
Reference
DEN/SPS-09054-2 (akci0ipc.PDF)
Keywords
NMDS, access, basic, ISDN, PICS, PSTN
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.: [phone]  Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
[e-mail]
http://www.etsi.fr
http://www.etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 141-2 V1.2.2:2005
3 EN 301 141-2 V1.2.2 (1998-09)
Contents
Intellectual Property Rights.4
Foreword .4
Introduction .4
1 Scope.5
2 Normative references .5
3 Definitions and abbreviations .6
3.1 Definitions . 6
3.2 Abbreviations. 6
4 Conformance to this PICS proforma specification .6
Annex A (normative): Protocol ICS proforma for EN 301 141-1 .7
A.1 Guidance for completing the PICS proforma.7
A.1.1 Purposes and structure . 7
A.1.2 Abbreviations and conventions. 7
A.1.3 Instructions for completing the PICS proforma . 9
A.2 Identification of the implementation.9
A.2.1 Date of the statement . 9
A.2.2 Implementation Under Test (IUT) identification . 9
A.2.3 System Under Test (SUT) identification. 9
A.2.4 Product supplier. 10
A.2.5 Client (if different from product supplier) . 10
A.2.6 PICS contact person. 11
A.3 Identification of the protocol .11
A.4 Global statement of conformance .11
A.5 Local Exchange. 12
A.5.1 Main features . 12
A.5.1.1 General. 12
A.5.2 Protocol. 12
A.5.2.1 Physical layer . 12
A.5.2.2 Protocol conformance . 12
A.6 Network terminating node.13
A.6.1 Main features . 13
A.6.1.1 General. 13
A.6.2 Protocol. 13
A.6.2.1 Physical layer . 13
A.6.2.1.1 Physical layer options. 13
A.6.2.2 Protocol conformance . 14
A.6.3 Powering user ports under failure conditions. 14
Bibliography.15
History.16
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 141-2 V1.2.2:2005
4 EN 301 141-2 V1.2.2 (1998-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Signalling
Protocols and Switching (SPS).
The present document is part 2 of a multi-part EN covering Narrowband Multi-service Delivery System (NMDS), as
identified below:
Part 1: "NMDS interface specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification".
National transposition dates
Date of adoption of this EN: 18 September 1998
Date of latest announcement of this EN (doa): 31 December 1998
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 June 1999
Date of withdrawal of any conflicting National Standard (dow): 30 June 1999
Introduction
To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and
options have been implemented for a telecommunication specification. Such a statement is called a Protocol
Implementation Conformance Statement (PICS).
ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 141-2 V1.2.2:2005
5 EN 301 141-2 V1.2.2 (1998-09)
1 Scope
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the
"Narrowband Multi-service Delivery System (NMDS)" defined in EN 301 141-1 [3] in compliance with the relevant
requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [5] and ETS 300 406 [2].
It allows either the network operator to formulate the requirements for an NMDS implemented in an Access Network
(AN) or a Service Node (SN), or to decide whether an implementation meets these requirements. It details in tabular
form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
2 Normative references
References may be made to:
a) specific versions of publications (identified by date of publication, edition number, version number, etc.), in
which case, subsequent revisions to the referenced document do not apply; or
b) all versions up to and including the identified version (identified by "up to and including" before the version
identity); or
c) all versions subsequent to and including the identified version (identified by "onwards" following the version
identity); or
d) publications without mention of a specific version, in which case the latest version applies.
A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETS 300 012-1 (1996): "Integrated Services Digital Network (ISDN); Basic User Network
Interface (UNI); Part 1: Layer 1 specification".
[2] ETS 300 406 (1995): "Methods for Testing and Specification (MTS); Protocol and profile
conformance testing specifications Standardization Methodology".
[3] EN 301 141-1 (V1.1): "Narrowband Multi-service Delivery System (NMDS); Part 1: NMDS
interface specification".
[4] ISO/IEC 9646-1 (1994): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 1: General concepts".
[5] ISO/IEC 9646-7 (1995): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 7: Implementation Conformance Statements".
ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 141-2 V1.2.2:2005
6 EN 301 141-2 V1.2.2 (1998-09)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following definitions apply:
- terms defined in EN 301 141-1 [3];
- terms defined in ISO/IEC 9646-1 [4] and in ISO/IEC 9646-7 [5].
In particular, the following terms defined in ISO/IEC 9646-1 [4] apply:
Protocol Implementation Conformance Statement (PICS): A statement made by the supplier of an implementation or
system claimed to conform to a given specification, stating which capabilities have been implemented. The ICS can take
several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc.
ICS proforma: A document, in the form of a questionnaire, which when completed for an implementation or system
becomes an ICS.
Protocol ICS (PICS): An ICS for an implementation or system claimed to conform to a given protocol specification.
Static conformance review: A review of the extent to which the static conformance requirements are met by the
Implementation Under Test (IUT), accomplished by comparing the PICS with the static conformance requirements
expressed in the relevant standard(s) (see ISO/IEC 9646-1 [4]).
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AN Access Network
ICS Implementation Conformance Statement
ISDN-BA Integrated Services Digital Network - Basic Access
IUT Implementation Under Test
NMDS Narrowband Multi-service Delivery System
PICS Protocol Implementation Conformance Statement
PSTN Public Switched Telephone Network
SCS System Conformance Statement
SN Service Node
SUT System Under Test
4 Conformance to this PICS proforma specification
If it claims to conform to the present document the actual PICS proforma to be filled in by a supplier shall be technically
equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming and ordering of
the proforma items.
An PICS which conforms to the present document shall be a conforming PICS proforma completed in accordance with
the guidance for completion given in clause A.1.
ETSI

---------------------- Page: 8 ----------------------

SIST EN 301 141-2 V1.2.2:2005
7 EN 301 141-2 V1.2.2 (1998-09)
Annex A (normative):
Protocol ICS proforma for EN 301 141-1
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users
of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended
purposes and may further publish the completed PICS.
A.1 Guidance for completing the PICS proforma
A.1.1 Purposes and structure
The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the
requirements defined in EN 301 141-1 [3] may provide information about the implementation in a standardized manner.
The PICS proforma is subdivided into subclauses for the following categories of information:
- guidance for completing the PICS proforma;
- identification of the implementation;
- identification of the protocol;
- global statement of conformance;
- .
A.1.2 Abbreviations and conventions
The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the
guidelines presented in ISO/IEC 9646-7 [5].
Item column
The item column contains a number which identifies the item in the table.
Item description column
The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly
means "is supported by the implementation?".
Status column
The following notations, defined in ISO/IEC 9646-7 [5], are used for the status column:
m mandatory - the capability is required to be supported.
o optional - the capability may be supported or not.
n/a not applicable - in the given context, it is impossible to use the capability.
x prohibited (excluded) - there is a requirement not to use this capability in the given context.
o.i qualified optional - for mutually exclusive or selectable options from a set. "i" is an integer which
identifies an unique group of related optional items and the logic of their selection which is defined
immediately following the table.
ci conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on the support of
other optional or conditional items. "i" is an integer identifying an unique conditional status
expression which is defined immediately following the table.
ETSI

---------------------- Page: 9 ----------------------

SIST EN 301 141-2 V1.2.2:2005
8 EN 301 141-2 V1.2.2 (1998-09)
Reference column
The reference column makes reference to EN 301 141-1 [3], except where explicitly stated otherwise.
Support column
The support column shall be filled in by the supplier of the implementation. The following common notations, defined in
ISO/IEC 9646-7 [5], are used for the support column:
Y or y supported by the implementation.
N or n not supported by the implementation.
N/A, n/a or - no answer required (allowed only if the status
...