ETSI ETS 300 699 ed.1 (1996-10)

Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Generic data link service for closed user groups (service type C, class 1)

DE/RES-03035

Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Profil podatkovnih storitev (DSP) - Generična storitev: podatkovna povezava za zaprte skupine uporabnikov (CUG) (storitev tipa C, razred 1)

General Information

• Status: Published
• Publication Date: 23-Oct-1996
• Technical Committee: RES 3 - DECT
• Current Stage: 13 - TB decision to make document historical
• Completion Date: 17-Nov-1999
• Ref Project: SIST ETS 300 699:1998 - Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Generic data link service for closed user groups (service type C, class 1)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 699:1998
01-oktober-1998
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH'(&73URILOSRGDWNRYQLK
VWRULWHY'63*HQHULþQDVWRULWHYSRGDWNRYQDSRYH]DYD]D]DSUWHVNXSLQH
XSRUDEQLNRY&8*VWRULWHYWLSD&UD]UHG
Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP);
Generic data link service for closed user groups (service type C, class 1)
Ta slovenski standard je istoveten z: ETS 300 699 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST ETS 300 699:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 699:1998

---------------------- Page: 2 ----------------------

SIST ETS 300 699:1998
EUROPEAN ETS 300 699
TELECOMMUNICATION October 1996
STANDARD
Source: ETSI TC-RES Reference: DE/RES-03035
ICS: 33.020, 33.060.50
Key words: DECT, profile, data
Radio Equipment and Systems (RES);
Digital Enhanced Cordless Telecommunications (DECT);
Data Services Profile (DSP);
Generic data link service for closed user groups
(service type C, class 1)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 699:1998
Page 2
ETS 300 699: October 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 699:1998
Page 3
ETS 300 699: October 1996
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions and abbreviations .8
3.1 Definitions .8
3.2 Abbreviations .9
4 Description of services .10
4.1 Reference configuration.10
4.2 Service objectives.10
5 Physical layer requirements .11
6 MAC layer requirements.11
7 DLC layer requirements .11
8 Network layer requirements .11
9 Management entity requirements.11
10 Generic interworking conventions and procedures .11
11 Configuration capabilities .11
Annex A (normative): Interworking conventions to specific networks .12
A.1 Interworking to V.24 circuits .12
A.1.1 Reference configuration.12
A.1.2 Global assumptions .12
A.1.3 Interworking procedures and conventions .13
A.1.3.1 Procedures at the DTE-side IWF .13
A.1.3.1.1 DTE-initiated link establishment .13
A.1.3.1.2 DCE-initiated link establishment.13
A.1.3.1.3 DTE-initiated link release.13
A.1.3.1.4 DCE-initiated link release .13
A.1.3.2 Procedures at the DCE-side IWF.13
A.1.3.2.1 DCE-initiated link establishment.14
A.1.3.2.2 DTE-initiated link establishment .14
A.1.3.2.3 DCE-initiated link release .14
A.1.3.2.4 DTE-initiated link release.14
A.1.3.3 PAD function .14
A.1.3.4 Timing conventions .14
A.1.3.5 Interworking of modem status lines, BREAK condition and PAUSE
condition .15
A.1.3.5.1 BREAK condition .15
A.1.3.5.2 PAUSE condition .15
A.1.3.6 Interworking of flow control.15
A.1.3.6.1 Flow control across the DTE / DTE-side IWF interface.15
A.1.3.6.2 Flow control across the DCE-side IWF / DCE interface.16
A.1.3.7 Configuration capabilities .16
A.2 Interworking to ISO 8802.3 and ISO 8802.5 networks.16

---------------------- Page: 5 ----------------------

SIST ETS 300 699:1998
Page 4
ETS 300 699: October 1996
History. 17

---------------------- Page: 6 ----------------------

SIST ETS 300 699:1998
Page 5
ETS 300 699: October 1996
Foreword
This European Telecommunication Standard (ETS) has been produced by the Radio Equipment and
Systems (RES) Technical Committee of the European Telecommunications Standards Institute (ETSI).
Transposition dates
Date of adoption of this ETS: 18 October 1996
Date of latest announcement of this ETS (doa): 31 January 1997
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 31 July 1997
Date of withdrawal of any conflicting National Standard (dow): 31 July 1997

---------------------- Page: 7 ----------------------

SIST ETS 300 699:1998
Page 6
ETS 300 699: October 1996
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 699:1998
Page 7
ETS 300 699: October 1996
1 Scope
This European Telecommunication Standard (ETS) defines a data profile for Digital Enhanced Cordless
Telecommunications (DECT) systems conforming to ETS 300 175, Parts 1 to 9 [1] to [9]. It is part of a
family of profiles that build upon, and extend, each other, aimed at the general connection of terminals
supporting non-voice services to a fixed infra-structure, private and public.
This ETS defines the type C service, mobility class 1, as described in ETR 185 [13].
For the type C service, this ETS specifies a Link Access Protocol service for the DECT Link Access
Procedure for the User plane (LAPU) which adds full DLC functionality to the generic frame relay service
specified in ETS 300 435 [11]. LAPU is based closely on the existing LAPC service and, allied with the
generic frame relay service, offers a robust, non-transparent transfer mechanism for synchronous and
asynchronous bit streams. It builds upon the type A and type B generic frame relay services and is
therefore fully compatible with both.
This ETS is intended for use in closed user groups and therefore specifies mobility class 1. It contains no
requirements for Mobility Management (MM) or Call Control (CC) and, hence, requires no DECT Control
plane (C-plane) functionality.
This ETS defines the specific requirements on the Physical (PHL), Medium Access Control (MAC) and
Data Link Control (DLC) layers of DECT and on ETS 300 435 [11]. The ETS also specifies Management
Entity (ME) requirements and generic interworking conventions which ensure the efficient use of the
DECT spectrum.
2 Normative references
This ETS incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 175-1: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 1:
Overview".
[2] ETS 300 175-2: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical
Layer".
[3] ETS 300 175-3: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium
Access Control (MAC) layer".
[4] ETS 300 175-4: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data
Link Control (DLC) layer".
[5] ETS 300 175-5: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network
(NWK) layer".
[6] ETS 300 175-6: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 6:
Identities and addressing".
[7] ETS 300 175-7: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security
features".

---------------------- Page: 9 ----------------------

SIST ETS 300 699:1998
Page 8
ETS 300 699: October 1996
[8] ETS 300 175-8: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech
coding and transmission".
[9] ETS 300 175-9: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 9: Public
Access Profile (PAP)".
[10] ETR 043: "Radio Equipment and Systems (RES); Digital European Cordless
Telecommunications (DECT); Common interface; Services and facilities
requirements specification".
[11] ETS 300 435: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Data Services Profile (DSP); Base
standard including interworking to connectionless networks (service types A and
B, Class 1)".
[12] ETS 300 651: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Data Services Profile (DSP); Generic
data link service; Service type C, class 2".
[13] ETR 185: "Radio Equipment and Systems (RES); Digital European Cordless
Telecommunications (DECT); Data Services Profile (DSP); Profile overview".
[14] ISO 8802: "Information technology - Telecommunications and information
exchange between systems - Local and metropolitan area networks - Specific
requirements".
[15] CCITT Recommendation V.24 (1988): "List of definitions for interchange circuits
between data terminal equipment (DTE) and data circuit-terminating equipment
(DCE)".
[16] CCITT Recommendation V.42bis (1990): "Data compression procedures for
data circuit terminating equipment (DCE) using error correction procedures".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this ETS, the following definitions apply:
kbyte: 1 000 bytes.
mobility class 1: Local area applications, for which terminals are pre-registered off-air with one or more
specific fixed parts, and establishment of service and user parameters is therefore implicit, according to a
profile-defined list.
multiframe: A repeating sequence of 16 successive TDMA frames, that allows low rate or sporadic
information to be multiplexed (e.g. basic system information or paging).
service type A: Low speed frame relay, with a net sustainable throughput of up to 24 kbits/s, optimized
for burst data, low power consumption and low complexity applications such as hand-portable equipment.
service type B: High performance frame relay, with a net sustainable throughput of up to 552 kbits/s,
optimized for high speed and low latency with burst data. Equipment implementation the type B profile
shall inter-operate with type A equipment.
service type C: Non-transparent connection of data streams requiring Link Access Protocol (LAP)
services, optimized for high reliability and low additional complexity. This builds upon the services offered
by the type A or B profiles.

---------------------- Page: 10 ----------------------

SIST ETS 300 699:1998
Page 9
ETS 300 699: October 1996
TDMA frame: A time-division multiplex of 10 ms duration, containing 24 successive full slots. A TDMA
frame starts with the first bit period of full slot 0 and ends with the last bit period of full slot 23.
3.2 Abbreviations
For the purposes of this ETS, the following abbreviations apply:
CC Call Control
C-plane Control plane
DCE Data Circuit-terminating Equipment
DECT Digital Enhanced Cordless Telecommunications
DLC Data Link Control
DSP Data Services Profile
DTE Data Terminating Equipment
FP Fixed Part
FT Fixed radio Termination
IWF Inter-Working Functions
IWU Inter-Working Unit
LAN Local Area data Network
LAP Link Access Protocol
LAPC A DLC layer C-plane protocol entity
LAPU A DLC layer U-plane protocol entity
LLME Lower Layer Management Entity
MAC Medium Access Control
ME Management Entity
MM Mobility Management
NWK Network
PAD Packet Assembly/Disassembly facility
PHL Physical layer
PP Portable Part
PT Portable radio Termination
SAP Service Access Point
SAPI Service Access Point Identifier
SDU Service Data Unit
TDMA Time Division Multiple Access
U-plane User plane

---------------------- Page: 11 ----------------------

SIST ETS 300 699:1998
Page 10
ETS 300 699: October 1996
4 Description of services
4.1 Reference configuration
The reference configuration for this profile shall be as shown in figure 1.
Closed
User Group
Set-up Data
Higher Higher
Protocol Protocol
L aye rs Layers
Interworking Function
Application Specific
Application S pecific
DE CT Layers
D ECT Layers
(op tiona l) Network Specific
(optional)
Network Specific Layers
Layers
DECT DECT
LAPU LA PU
DECT
DECT
A.1 or B.1 Service
A.1 or B.1 Service
Figure 1: Profile reference
...