ETSI EN 303 687 V1.1.1 (2023-06)
6 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum
6 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum
DEN/BRAN-230021
6 GHz WAS/RLAN - Harmonizirani standard za dostop do radijskega spektra
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 303 687 V1.1.1:2023
01-september-2023
6 GHz WAS/RLAN - Harmonizirani standard za dostop do radijskega spektra
6 GHz WAS/RLAN Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 303 687 V1.1.1 (2023-06)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
SIST EN 303 687 V1.1.1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 303 687 V1.1.1:2023
---------------------- Page: 2 ----------------------
SIST EN 303 687 V1.1.1:2023
ETSI EN 303 687 V1.1.1 (2023-06)
HARMONISED EUROPEAN STANDARD
6 GHz WAS/RLAN;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
SIST EN 303 687 V1.1.1:2023
2 ETSI EN 303 687 V1.1.1 (2023-06)
Reference
DEN/BRAN-230021
Keywords
access, broadband, LAN, radio, regulation, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2023.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 303 687 V1.1.1:2023
3 ETSI EN 303 687 V1.1.1 (2023-06)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 12
3.1 Terms . 12
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 Equipment categories . 15
4.2.1 Description of categories . 15
4.2.2 LPI category. 15
4.2.3 VLP category . 15
4.3 Conformance requirements . 16
4.3.1 Nominal centre frequencies and nominal bandwidth . 16
4.3.1.1 General . 16
4.3.1.2 Definition . 16
4.3.1.3 Limits . 16
4.3.1.4 Conformance . 16
4.3.2 RF output power . 16
4.3.2.1 Definition . 16
4.3.2.2 Limits . 17
4.3.2.3 Conformance . 17
4.3.3 Power Spectral Density . 17
4.3.3.1 Definition . 17
4.3.3.2 Limits . 17
4.3.3.3 VLP NB usage with a PSD above 1 dBm/MHz . 17
4.3.3.4 Conformance . 17
4.3.4 Transmitter unwanted emissions . 18
4.3.4.1 Transmitter unwanted emissions in the out-of-band domain . 18
4.3.4.1.1 Definition. 18
4.3.4.1.2 Limits . 18
4.3.4.1.3 Conformance . 18
4.3.4.2 Transmitter unwanted emissions in the spurious domain . 18
4.3.4.2.1 Definition. 18
4.3.4.2.2 Limits . 18
4.3.4.2.3 Conformance . 19
4.3.4.3 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 19
4.3.4.3.1 Definition. 19
4.3.4.3.2 Limits . 19
4.3.4.3.3 Conformance . 21
4.3.5 Receiver spurious emissions . 22
4.3.5.1 Definition . 22
4.3.5.2 Limits . 22
4.3.5.3 Conformance . 22
4.3.6 Channel access mechanism . 22
4.3.6.1 Applicability. 22
4.3.6.2 Definition . 22
4.3.6.3 Requirements and limits . 22
ETSI
---------------------- Page: 5 ----------------------
SIST EN 303 687 V1.1.1:2023
4 ETSI EN 303 687 V1.1.1 (2023-06)
4.3.6.3.1 Channel access mechanism for Frame Based Equipment (FBE) . 22
4.3.6.3.2 Channel access mechanism for Load Based Equipment (LBE) . 24
4.3.6.3.3 ED Threshold level (Energy Detection Threshold level, FBE and LBE) . 29
4.3.6.3.4 Short Control Signalling transmissions (FBE and LBE) . 30
4.3.6.4 Conformance . 30
4.3.7 Receiver blocking . 30
4.3.7.1 Definition . 30
4.3.7.2 Performance criteria . 30
4.3.7.3 Limits . 30
4.3.7.4 Conformance . 31
4.3.8 Receiver selectivity . 31
4.3.8.1 Definition . 31
4.3.8.2 Performance criteria . 32
4.3.8.3 Limits . 32
4.3.8.4 Conformance . 32
4.3.9 Mechanical and electrical design . 32
4.3.9.1 Power feeding . 32
4.3.9.1.1 Description of types of power supply . 32
4.3.9.1.2 Wired power connection equipment . 33
4.3.9.2 Antenna design . 33
4.3.9.2.1 Description of types of antenna design . 33
4.3.9.2.2 Integral antenna . 33
4.3.9.3 Conformance . 33
4.3.10 User Access Restrictions . 33
4.3.10.1 Definition . 33
4.3.10.2 Requirements . 33
4.3.10.3 Conformance . 33
5 Testing for compliance with technical requirements . 34
5.1 Environmental conditions for testing . 34
5.1.1 Introduction. 34
5.1.2 Normal test conditions . 34
5.1.2.1 Normal temperature and humidity . 34
5.1.2.2 Normal power source . 34
5.1.3 Extreme test conditions . 34
5.2 Interpretation of the measurement results . 34
5.3 Definition of other test conditions . 35
5.3.1 Test sequences . 35
5.3.2 Test channels . 35
5.3.3 Antennas . 36
5.3.3.1 Integrated and dedicated antennas . 36
5.3.3.2 Transmit operating modes . 36
5.3.3.2.1 Operating mode 1 (single antenna) . 36
5.3.3.2.2 Operating mode 2 (multiple antennas, no beamforming) . 37
5.3.3.2.3 Operating mode 3 (multiple antennas, with beamforming) . 37
5.3.4 Presentation of equipment . 37
5.3.5 Measurement methods . 37
5.4 Essential radio test suites . 38
5.4.1 Product information . 38
5.4.2 Nominal centre frequencies . 39
5.4.2.1 Test conditions . 39
5.4.2.2 Test methods . 39
5.4.2.2.1 Conducted measurement. 39
5.4.2.2.2 Radiated measurement . 40
5.4.2.2.3 Test fixture measurement . 40
5.4.3 RF output power . 40
5.4.3.1 Test conditions . 40
5.4.3.2 Test methods . 41
5.4.3.2.1 Conducted measurement. 41
5.4.3.2.2 Radiated measurement . 42
5.4.3.2.3 Test fixture measurement . 43
5.4.4 Power Spectral Density . 43
ETSI
---------------------- Page: 6 ----------------------
SIST EN 303 687 V1.1.1:2023
5 ETSI EN 303 687 V1.1.1 (2023-06)
5.4.4.1 Test conditions . 43
5.4.4.2 Test methods . 43
5.4.4.2.1 Conducted measurement. 43
5.4.4.2.2 Radiated measurement . 46
5.4.4.2.3 Test fixture measurement . 46
5.4.5 Transmitter unwanted emissions outside the 6 GHz WAS/RLAN band . 46
5.4.5.1 Test conditions . 46
5.4.5.2 Test method . 46
5.4.5.2.1 Conducted measurement. 46
5.4.5.2.2 Radiated measurement . 49
5.4.5.2.3 Test fixture measurement . 49
5.4.6 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 49
5.4.6.1 Test conditions . 49
5.4.6.2 Test method . 49
5.4.6.2.1 Conducted measurement. 49
5.4.6.2.2 Radiated measurement . 51
5.4.6.2.3 Test fixture measurement . 51
5.4.7 Receiver spurious emissions . 51
5.4.7.1 Test conditions . 51
5.4.7.2 Test methods . 52
5.4.7.2.1 Conducted measurement. 52
5.4.7.2.2 Radiated measurement . 54
5.4.7.2.3 Test fixture measurement . 54
5.4.8 Channel access mechanism . 54
5.4.8.1 Test conditions . 54
5.4.8.2 Test method for FBE . 54
5.4.8.2.1 Additional test conditions . 54
5.4.8.2.2 Conducted measurements . 54
5.4.8.2.3 Generic test procedure for measuring channel/frequency usage . 58
5.4.8.2.4 Radiated measurements . 58
5.4.8.2.5 Test fixture measurement . 59
5.4.8.3 Test method for LBE . 59
5.4.8.3.1 Additional test conditions . 59
5.4.8.3.2 Conducted measurements . 59
5.4.8.3.3 Generic test procedure for measuring channel/frequency usage . 67
5.4.8.3.4 Radiated measurements . 67
5.4.8.3.5 Test fixture measurement . 68
5.4.9 Receiver blocking . 68
5.4.9.1 Test conditions . 68
5.4.9.2 Test methods . 68
5.4.9.2.1 Conducted measurement. 68
5.4.9.2.2 Radiated measurement . 69
5.4.9.2.3 Test fixture measurement . 69
5.4.10 Receiver selectivity . 70
5.4.10.1 Test conditions . 70
5.4.10.2 Test methods . 70
5.4.10.2.1 Conducted measurement. 70
5.4.10.2.2 Radiated measurements . 71
5.4.10.2.3 Test fixture measurement .
...
ETSI EN 303 687 V1.1.1 (2023-06)
HARMONISED EUROPEAN STANDARD
6 GHz WAS/RLAN;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 ETSI EN 303 687 V1.1.1 (2023-06)
Reference
DEN/BRAN-230021
Keywords
access, broadband, LAN, radio, regulation, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2023.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 303 687 V1.1.1 (2023-06)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 12
3.1 Terms . 12
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 Equipment categories . 15
4.2.1 Description of categories . 15
4.2.2 LPI category. 15
4.2.3 VLP category . 15
4.3 Conformance requirements . 16
4.3.1 Nominal centre frequencies and nominal bandwidth . 16
4.3.1.1 General . 16
4.3.1.2 Definition . 16
4.3.1.3 Limits . 16
4.3.1.4 Conformance . 16
4.3.2 RF output power . 16
4.3.2.1 Definition . 16
4.3.2.2 Limits . 17
4.3.2.3 Conformance . 17
4.3.3 Power Spectral Density . 17
4.3.3.1 Definition . 17
4.3.3.2 Limits . 17
4.3.3.3 VLP NB usage with a PSD above 1 dBm/MHz . 17
4.3.3.4 Conformance . 17
4.3.4 Transmitter unwanted emissions . 18
4.3.4.1 Transmitter unwanted emissions in the out-of-band domain . 18
4.3.4.1.1 Definition. 18
4.3.4.1.2 Limits . 18
4.3.4.1.3 Conformance . 18
4.3.4.2 Transmitter unwanted emissions in the spurious domain . 18
4.3.4.2.1 Definition. 18
4.3.4.2.2 Limits . 18
4.3.4.2.3 Conformance . 19
4.3.4.3 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 19
4.3.4.3.1 Definition. 19
4.3.4.3.2 Limits . 19
4.3.4.3.3 Conformance . 21
4.3.5 Receiver spurious emissions . 22
4.3.5.1 Definition . 22
4.3.5.2 Limits . 22
4.3.5.3 Conformance . 22
4.3.6 Channel access mechanism . 22
4.3.6.1 Applicability. 22
4.3.6.2 Definition . 22
4.3.6.3 Requirements and limits . 22
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 303 687 V1.1.1 (2023-06)
4.3.6.3.1 Channel access mechanism for Frame Based Equipment (FBE) . 22
4.3.6.3.2 Channel access mechanism for Load Based Equipment (LBE) . 24
4.3.6.3.3 ED Threshold level (Energy Detection Threshold level, FBE and LBE) . 29
4.3.6.3.4 Short Control Signalling transmissions (FBE and LBE) . 30
4.3.6.4 Conformance . 30
4.3.7 Receiver blocking . 30
4.3.7.1 Definition . 30
4.3.7.2 Performance criteria . 30
4.3.7.3 Limits . 30
4.3.7.4 Conformance . 31
4.3.8 Receiver selectivity . 31
4.3.8.1 Definition . 31
4.3.8.2 Performance criteria . 32
4.3.8.3 Limits . 32
4.3.8.4 Conformance . 32
4.3.9 Mechanical and electrical design . 32
4.3.9.1 Power feeding . 32
4.3.9.1.1 Description of types of power supply . 32
4.3.9.1.2 Wired power connection equipment . 33
4.3.9.2 Antenna design . 33
4.3.9.2.1 Description of types of antenna design . 33
4.3.9.2.2 Integral antenna . 33
4.3.9.3 Conformance . 33
4.3.10 User Access Restrictions . 33
4.3.10.1 Definition . 33
4.3.10.2 Requirements . 33
4.3.10.3 Conformance . 33
5 Testing for compliance with technical requirements . 34
5.1 Environmental conditions for testing . 34
5.1.1 Introduction. 34
5.1.2 Normal test conditions . 34
5.1.2.1 Normal temperature and humidity . 34
5.1.2.2 Normal power source . 34
5.1.3 Extreme test conditions . 34
5.2 Interpretation of the measurement results . 34
5.3 Definition of other test conditions . 35
5.3.1 Test sequences . 35
5.3.2 Test channels . 35
5.3.3 Antennas . 36
5.3.3.1 Integrated and dedicated antennas . 36
5.3.3.2 Transmit operating modes . 36
5.3.3.2.1 Operating mode 1 (single antenna) . 36
5.3.3.2.2 Operating mode 2 (multiple antennas, no beamforming) . 37
5.3.3.2.3 Operating mode 3 (multiple antennas, with beamforming) . 37
5.3.4 Presentation of equipment . 37
5.3.5 Measurement methods . 37
5.4 Essential radio test suites . 38
5.4.1 Product information . 38
5.4.2 Nominal centre frequencies . 39
5.4.2.1 Test conditions . 39
5.4.2.2 Test methods . 39
5.4.2.2.1 Conducted measurement. 39
5.4.2.2.2 Radiated measurement . 40
5.4.2.2.3 Test fixture measurement . 40
5.4.3 RF output power . 40
5.4.3.1 Test conditions . 40
5.4.3.2 Test methods . 41
5.4.3.2.1 Conducted measurement. 41
5.4.3.2.2 Radiated measurement . 42
5.4.3.2.3 Test fixture measurement . 43
5.4.4 Power Spectral Density . 43
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 303 687 V1.1.1 (2023-06)
5.4.4.1 Test conditions . 43
5.4.4.2 Test methods . 43
5.4.4.2.1 Conducted measurement. 43
5.4.4.2.2 Radiated measurement . 46
5.4.4.2.3 Test fixture measurement . 46
5.4.5 Transmitter unwanted emissions outside the 6 GHz WAS/RLAN band . 46
5.4.5.1 Test conditions . 46
5.4.5.2 Test method . 46
5.4.5.2.1 Conducted measurement. 46
5.4.5.2.2 Radiated measurement . 49
5.4.5.2.3 Test fixture measurement . 49
5.4.6 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 49
5.4.6.1 Test conditions . 49
5.4.6.2 Test method . 49
5.4.6.2.1 Conducted measurement. 49
5.4.6.2.2 Radiated measurement . 51
5.4.6.2.3 Test fixture measurement . 51
5.4.7 Receiver spurious emissions . 51
5.4.7.1 Test conditions . 51
5.4.7.2 Test methods . 52
5.4.7.2.1 Conducted measurement. 52
5.4.7.2.2 Radiated measurement . 54
5.4.7.2.3 Test fixture measurement . 54
5.4.8 Channel access mechanism . 54
5.4.8.1 Test conditions . 54
5.4.8.2 Test method for FBE . 54
5.4.8.2.1 Additional test conditions . 54
5.4.8.2.2 Conducted measurements . 54
5.4.8.2.3 Generic test procedure for measuring channel/frequency usage . 58
5.4.8.2.4 Radiated measurements . 58
5.4.8.2.5 Test fixture measurement . 59
5.4.8.3 Test method for LBE . 59
5.4.8.3.1 Additional test conditions . 59
5.4.8.3.2 Conducted measurements . 59
5.4.8.3.3 Generic test procedure for measuring channel/frequency usage . 67
5.4.8.3.4 Radiated measurements . 67
5.4.8.3.5 Test fixture measurement . 68
5.4.9 Receiver blocking . 68
5.4.9.1 Test conditions . 68
5.4.9.2 Test methods . 68
5.4.9.2.1 Conducted measurement. 68
5.4.9.2.2 Radiated measurement . 69
5.4.9.2.3 Test fixture measurement . 69
5.4.10 Receiver selectivity . 70
5.4.10.1 Test conditions . 70
5.4.10.2 Test methods . 70
5.4.10.2.1 Conducted measurement. 70
5.4.10.2.2 Radiated measurements . 71
5.4.10.2.3 Test fixture measurement . 71
5.4.11 Mechanical and electrical design . 72
5.4.12 VLP NB operation with a PSD exceeding 1 dBm/MHz . 72
5.4.12.1 Test conditions . 72
5.4.12.2 Test methods . 72
5.4.12.2.1 Conducted measurements .
...
Draft ETSI EN 303 687 V1.1.0 (2023-03)
HARMONISED EUROPEAN STANDARD
6 GHz WAS/RLAN;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 303 687 V1.1.0 (2023-03)
Reference
DEN/BRAN-230021
Keywords
access, broadband, LAN, radio, regulation, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2023.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 303 687 V1.1.0 (2023-03)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 12
3.1 Terms . 12
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 Equipment categories . 15
4.2.1 Description of categories . 15
4.2.2 LPI category. 15
4.2.3 VLP category . 15
4.3 Conformance requirements . 16
4.3.1 Nominal centre frequencies and nominal bandwidth . 16
4.3.1.1 General . 16
4.3.1.2 Definition . 16
4.3.1.3 Limits . 16
4.3.1.4 Conformance . 16
4.3.2 RF output power . 16
4.3.2.1 Definition . 16
4.3.2.2 Limits . 17
4.3.2.3 Conformance . 17
4.3.3 Power Spectral Density . 17
4.3.3.1 Definition . 17
4.3.3.2 Limits . 17
4.3.3.3 VLP NB usage with a PSD above 1 dBm/MHz . 17
4.3.3.4 Conformance . 17
4.3.4 Transmitter unwanted emissions . 18
4.3.4.1 Transmitter unwanted emissions in the out-of-band domain . 18
4.3.4.1.1 Definition. 18
4.3.4.1.2 Limits . 18
4.3.4.1.3 Conformance . 18
4.3.4.2 Transmitter unwanted emissions in the spurious domain . 18
4.3.4.2.1 Definition. 18
4.3.4.2.2 Limits . 18
4.3.4.2.3 Conformance . 19
4.3.4.3 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 19
4.3.4.3.1 Definition. 19
4.3.4.3.2 Limits . 19
4.3.4.3.3 Conformance . 21
4.3.5 Receiver spurious emissions . 22
4.3.5.1 Definition . 22
4.3.5.2 Limits . 22
4.3.5.3 Conformance . 22
4.3.6 Channel access mechanism . 22
4.3.6.1 Applicability. 22
4.3.6.2 Definition . 22
4.3.6.3 Requirements and limits . 22
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 303 687 V1.1.0 (2023-03)
4.3.6.3.1 Channel access mechanism for Frame Based Equipment (FBE) . 22
4.3.6.3.2 Channel access mechanism for Load Based Equipment (LBE) . 24
4.3.6.3.3 ED Threshold level (Energy Detection Threshold level, FBE and LBE) . 29
4.3.6.3.4 Short Control Signalling transmissions (FBE and LBE) . 30
4.3.6.4 Conformance . 30
4.3.7 Receiver blocking . 30
4.3.7.1 Definition . 30
4.3.7.2 Performance criteria . 30
4.3.7.3 Limits . 30
4.3.7.4 Conformance . 31
4.3.8 Receiver selectivity . 31
4.3.8.1 Definition . 31
4.3.8.2 Performance criteria . 32
4.3.8.3 Limits . 32
4.3.8.4 Conformance . 32
4.3.9 Mechanical and electrical design . 32
4.3.9.1 Power feeding . 32
4.3.9.1.1 Description of types of power supply . 32
4.3.9.1.2 Wired power connection equipment . 33
4.3.9.2 Antenna design . 33
4.3.9.2.1 Description of types of antenna design . 33
4.3.9.2.2 Integral antenna . 33
4.3.9.3 Conformance . 33
4.3.10 User Access Restrictions . 33
4.3.10.1 Definition . 33
4.3.10.2 Requirements . 33
4.3.10.3 Conformance . 33
5 Testing for compliance with technical requirements . 34
5.1 Environmental conditions for testing . 34
5.1.1 Introduction. 34
5.1.2 Normal test conditions . 34
5.1.2.1 Normal temperature and humidity . 34
5.1.2.2 Normal power source . 34
5.1.3 Extreme test conditions . 34
5.2 Interpretation of the measurement results . 34
5.3 Definition of other test conditions . 35
5.3.1 Test sequences . 35
5.3.2 Test channels . 35
5.3.3 Antennas . 36
5.3.3.1 Integrated and dedicated antennas . 36
5.3.3.2 Transmit operating modes . 36
5.3.3.2.1 Operating mode 1 (single antenna) . 36
5.3.3.2.2 Operating mode 2 (multiple antennas, no beamforming) . 37
5.3.3.2.3 Operating mode 3 (multiple antennas, with beamforming) . 37
5.3.4 Presentation of equipment . 37
5.3.5 Measurement methods . 37
5.4 Essential radio test suites . 38
5.4.1 Product information . 38
5.4.2 Nominal centre frequencies . 39
5.4.2.1 Test conditions . 39
5.4.2.2 Test methods . 39
5.4.2.2.1 Conducted measurement. 39
5.4.2.2.2 Radiated measurement . 40
5.4.2.2.3 Test fixture measurement . 40
5.4.3 RF output power . 40
5.4.3.1 Test conditions . 40
5.4.3.2 Test methods . 41
5.4.3.2.1 Conducted measurement. 41
5.4.3.2.2 Radiated measurement . 42
5.4.3.2.3 Test fixture measurement . 43
5.4.4 Power Spectral Density . 43
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 303 687 V1.1.0 (2023-03)
5.4.4.1 Test conditions . 43
5.4.4.2 Test methods . 43
5.4.4.2.1 Conducted measurement. 43
5.4.4.2.2 Radiated measurement . 46
5.4.4.2.3 Test fixture measurement . 46
5.4.5 Transmitter unwanted emissions outside the 6 GHz WAS/RLAN band . 46
5.4.5.1 Test conditions . 46
5.4.5.2 Test method . 46
5.4.5.2.1 Conducted measurement. 46
5.4.5.2.2 Radiated measurement . 49
5.4.5.2.3 Test fixture measurement . 49
5.4.6 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 49
5.4.6.1 Test conditions . 49
5.4.6.2 Test method . 49
5.4.6.2.1 Conducted measurement. 49
5.4.6.2.2 Radiated measurement . 51
5.4.6.2.3 Test fixture measurement . 51
5.4.7 Receiver spurious emissions . 51
5.4.7.1 Test conditions . 51
5.4.7.2 Test methods . 52
5.4.7.2.1 Conducted measurement. 52
5.4.7.2.2 Radiated measurement . 54
5.4.7.2.3 Test fixture measurement . 54
5.4.8 Channel access mechanism . 54
5.4.8.1 Test conditions . 54
5.4.8.2 Test method for FBE . 54
5.4.8.2.1 Additional test conditions . 54
5.4.8.2.2 Conducted measurements . 54
5.4.8.2.3 Generic test procedure for measuring channel/frequency usage . 58
5.4.8.2.4 Radiated measurements . 58
5.4.8.2.5 Test fixture measurement . 59
5.4.8.3 Test method for LBE . 59
5.4.8.3.1 Additional test conditions . 59
5.4.8.3.2 Conducted measurements . 59
5.4.8.3.3 Generic test procedure for measuring channel/frequency usage . 67
5.4.8.3.4 Radiated measurements . 67
5.4.8.3.5 Test fixture measurement . 68
5.4.9 Receiver blocking . 68
5.4.9.1 Test conditions . 68
5.4.9.2 Test methods . 68
5.4.9.2.1 Conducted measurement. 68
5.4.9.2.2 Radiated measurement . 69
5.4.9.2.3 Test fixture measurement . 69
5.4.10 Receiver selectivity . 70
5.4.10.1 Test conditions . 70
5.4.10.2 Test methods . 70
5.4.10.2.1 Conducted measurement. 70
5.4.10.2.2 Radiated measurements . 71
5.4.10.2.3 Test fixture measurement . 71
5.4.11 Mechanical and electrical design . 72
5.4.12 VLP NB operation with a PSD exceeding 1 dBm/MHz . 72
5.4.12.1 Test conditions . 72
5.4.12.2 Test methods . 72
5.4.12.2.1 Conducted measurements .
...
Draft ETSI EN 303 687 V1.0.0 (2022-04)
HARMONISED EUROPEAN STANDARD
6 GHz WAS/RLAN;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 303 687 V1.0.0 (2022-04)
Reference
DEN/BRAN-230021
Keywords
access, broadband, LAN, radio, regulation, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 303 687 V1.0.0 (2022-04)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 12
3.1 Terms . 12
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 Equipment categories . 15
4.2.1 Description of categories . 15
4.2.2 LPI category. 15
4.2.3 VLP category . 15
4.3 Conformance requirements . 16
4.3.1 Nominal centre frequencies and nominal bandwidth . 16
4.3.1.1 General . 16
4.3.1.2 Definition . 16
4.3.1.3 Limits . 16
4.3.1.4 Conformance . 16
4.3.2 RF output power . 16
4.3.2.1 Definition . 16
4.3.2.2 Limits . 17
4.3.2.3 Conformance . 17
4.3.3 Power Spectral Density . 17
4.3.3.1 Definition . 17
4.3.3.2 Limits . 17
4.3.3.3 VLP NB usage with a PSD above 1 dBm/MHz . 17
4.3.3.4 Conformance . 18
4.3.4 Transmitter unwanted emissions . 18
4.3.4.1 Transmitter unwanted emissions in the out-of-band domain . 18
4.3.4.1.1 Definition. 18
4.3.4.1.2 Limits . 18
4.3.4.1.3 Conformance . 18
4.3.4.2 Transmitter unwanted emissions in the spurious domain . 18
4.3.4.2.1 Definition. 18
4.3.4.2.2 Limits . 19
4.3.4.2.3 Conformance . 19
4.3.4.3 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 19
4.3.4.3.1 Definition. 19
4.3.4.3.2 Limits . 19
4.3.4.3.3 Conformance . 21
4.3.5 Receiver spurious emissions . 22
4.3.5.1 Definition . 22
4.3.5.2 Limits . 22
4.3.5.3 Conformance . 22
4.3.6 Channel access mechanism . 22
4.3.6.1 Applicability. 22
4.3.6.2 Definition . 22
4.3.6.3 Requirements and limits . 22
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 303 687 V1.0.0 (2022-04)
4.3.6.3.1 Channel access mechanism for Frame Based Equipment (FBE) . 22
4.3.6.3.2 Channel access mechanism for Load Based Equipment (LBE) . 24
4.3.6.3.3 ED Threshold level (Energy Detection Threshold level, FBE and LBE) . 29
4.3.6.3.4 Short Control Signalling transmissions (FBE and LBE) . 30
4.3.6.4 Conformance . 30
4.3.7 Receiver blocking . 30
4.3.7.1 Definition . 30
4.3.7.2 Performance criteria . 30
4.3.7.3 Limits . 30
4.3.7.4 Conformance . 31
4.3.8 Receiver selectivity . 31
4.3.8.1 Definition . 31
4.3.8.2 Performance criteria . 32
4.3.8.3 Limits . 32
4.3.8.4 Conformance . 32
4.3.9 Mechanical and electrical design . 32
4.3.9.1 Power feeding . 32
4.3.9.1.1 Description of types of power supply . 32
4.3.9.1.2 Wired power connection equipment . 33
4.3.9.2 Antenna design . 33
4.3.9.2.1 Description of types of antenna design . 33
4.3.9.2.2 Integral antenna . 33
4.3.9.3 Conformance . 33
4.3.10 User Access Restrictions . 33
4.3.10.1 Definition . 33
4.3.10.2 Requirements . 33
4.3.10.3 Conformance . 33
5 Testing for compliance with technical requirements . 34
5.1 Environmental conditions for testing . 34
5.1.1 Introduction. 34
5.1.2 Normal test conditions . 34
5.1.2.1 Normal temperature and humidity . 34
5.1.2.2 Normal power source . 34
5.1.3 Extreme test conditions . 34
5.2 Interpretation of the measurement results . 34
5.3 Definition of other test conditions . 34
5.3.1 Test sequences . 34
5.3.2 Test channels . 35
5.3.3 Antennas . 36
5.3.3.1 Integrated and dedicated antennas . 36
5.3.3.2 Transmit operating modes . 36
5.3.3.2.1 Operating mode 1 (single antenna) . 36
5.3.3.2.2 Operating mode 2 (multiple antennas, no beamforming) . 37
5.3.3.2.3 Operating mode 3 (multiple antennas, with beamforming) . 37
5.3.4 Presentation of equipment . 37
5.3.5 Measurement methods . 37
5.4 Essential radio test suites . 38
5.4.1 Product information . 38
5.4.2 Nominal centre frequencies . 39
5.4.2.1 Test conditions . 39
5.4.2.2 Test methods . 39
5.4.2.2.1 Conducted measurement. 39
5.4.2.2.2 Radiated measurement . 40
5.4.2.2.3 Test fixture measurement . 40
5.4.3 RF output power . 40
5.4.3.1 Test conditions . 40
5.4.3.2 Test methods . 41
5.4.3.2.1 Conducted measurement. 41
5.4.3.2.2 Radiated measurement . 42
5.4.3.2.3 Test fixture measurement . 43
5.4.4 Power Spectral Density . 43
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 303 687 V1.0.0 (2022-04)
5.4.4.1 Test conditions . 43
5.4.4.2 Test methods . 43
5.4.4.2.1 Conducted measurement. 43
5.4.4.2.2 Radiated measurement . 46
5.4.4.2.3 Test fixture measurement . 46
5.4.5 Transmitter unwanted emissions outside the 6 GHz WAS/RLAN band . 46
5.4.5.1 Test conditions . 46
5.4.5.2 Test method . 46
5.4.5.2.1 Conducted measurement. 46
5.4.5.2.2 Radiated measurement . 49
5.4.5.2.3 Test fixture measurement . 49
5.4.6 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 49
5.4.6.1 Test conditions . 49
5.4.6.2 Test method . 49
5.4.6.2.1 Conducted measurement. 49
5.4.6.2.2 Radiated measurement . 51
5.4.6.2.3 Test fixture measurement . 51
5.4.7 Receiver spurious emissions . 51
5.4.7.1 Test conditions . 51
5.4.7.2 Test methods . 52
5.4.7.2.1 Conducted measurement. 52
5.4.7.2.2 Radiated measurement . 54
5.4.7.2.3 Test fixture measurement . 54
5.4.8 Channel access mechanism . 54
5.4.8.1 Test conditions . 54
5.4.8.2 Test method for FBE . 54
5.4.8.2.1 Additional test conditions . 54
5.4.8.2.2 Conducted measurements . 54
5.4.8.2.3 Generic test procedure for measuring channel/frequency usage . 58
5.4.8.2.4 Radiated measurements . 58
5.4.8.2.5 Test fixture measurement . 59
5.4.8.3 Test method for LBE . 59
5.4.8.3.1 Additional test conditions . 59
5.4.8.3.2 Conducted measurements . 59
5.4.8.3.3 Generic test procedure for measuring channel/frequency usage . 67
5.4.8.3.4 Radiated measurements . 67
5.4.8.3.5 Test fixture measurement . 68
5.4.9 Receiver blocking . 68
5.4.9.1 Test conditions . 68
5.4.9.2 Test methods . 68
5.4.9.2.1 Conducted measurement. 68
5.4.9.2.2 Radiated measurement . 69
5.4.9.2.3 Test fixture measurement . 69
5.4.10 Receiver selectivity . 70
5.4.10.1 Test conditions . 70
5.4.10.2 Test methods . 70
5.4.10.2.1 Conducted measurement. 70
5.4.10.2.2 Radiated measurements . 71
5.4.10.2.3 Test fixture measurement . 71
5.4.11 Mechanical and electrical design . 71
5.4.12 VLP NB operation with a PSD exceeding 1 dBm/MHz . 72
5.4.12.1 Test conditions . 72
5.4.12.2 Test methods . 72
5.4.12.2.1 Conducted measurements .
...
SLOVENSKI STANDARD
oSIST prEN 303 687 V1.1.0:2023
01-junij-2023
6 GHz WAS/RLAN - Harmonizirani standard za dostop do radijskega spektra
6 GHz WAS/RLAN Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 303 687 V1.1.0 (2023-03)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
oSIST prEN 303 687 V1.1.0:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 303 687 V1.1.0:2023
---------------------- Page: 2 ----------------------
oSIST prEN 303 687 V1.1.0:2023
Draft ETSI EN 303 687 V1.1.0 (2023-03)
HARMONISED EUROPEAN STANDARD
6 GHz WAS/RLAN;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
oSIST prEN 303 687 V1.1.0:2023
2 Draft ETSI EN 303 687 V1.1.0 (2023-03)
Reference
DEN/BRAN-230021
Keywords
access, broadband, LAN, radio, regulation, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2023.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 303 687 V1.1.0:2023
3 Draft ETSI EN 303 687 V1.1.0 (2023-03)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 12
3.1 Terms . 12
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 Equipment categories . 15
4.2.1 Description of categories . 15
4.2.2 LPI category. 15
4.2.3 VLP category . 15
4.3 Conformance requirements . 16
4.3.1 Nominal centre frequencies and nominal bandwidth . 16
4.3.1.1 General . 16
4.3.1.2 Definition . 16
4.3.1.3 Limits . 16
4.3.1.4 Conformance . 16
4.3.2 RF output power . 16
4.3.2.1 Definition . 16
4.3.2.2 Limits . 17
4.3.2.3 Conformance . 17
4.3.3 Power Spectral Density . 17
4.3.3.1 Definition . 17
4.3.3.2 Limits . 17
4.3.3.3 VLP NB usage with a PSD above 1 dBm/MHz . 17
4.3.3.4 Conformance . 17
4.3.4 Transmitter unwanted emissions . 18
4.3.4.1 Transmitter unwanted emissions in the out-of-band domain . 18
4.3.4.1.1 Definition. 18
4.3.4.1.2 Limits . 18
4.3.4.1.3 Conformance . 18
4.3.4.2 Transmitter unwanted emissions in the spurious domain . 18
4.3.4.2.1 Definition. 18
4.3.4.2.2 Limits . 18
4.3.4.2.3 Conformance . 19
4.3.4.3 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 19
4.3.4.3.1 Definition. 19
4.3.4.3.2 Limits . 19
4.3.4.3.3 Conformance . 21
4.3.5 Receiver spurious emissions . 22
4.3.5.1 Definition . 22
4.3.5.2 Limits . 22
4.3.5.3 Conformance . 22
4.3.6 Channel access mechanism . 22
4.3.6.1 Applicability. 22
4.3.6.2 Definition . 22
4.3.6.3 Requirements and limits . 22
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 303 687 V1.1.0:2023
4 Draft ETSI EN 303 687 V1.1.0 (2023-03)
4.3.6.3.1 Channel access mechanism for Frame Based Equipment (FBE) . 22
4.3.6.3.2 Channel access mechanism for Load Based Equipment (LBE) . 24
4.3.6.3.3 ED Threshold level (Energy Detection Threshold level, FBE and LBE) . 29
4.3.6.3.4 Short Control Signalling transmissions (FBE and LBE) . 30
4.3.6.4 Conformance . 30
4.3.7 Receiver blocking . 30
4.3.7.1 Definition . 30
4.3.7.2 Performance criteria . 30
4.3.7.3 Limits . 30
4.3.7.4 Conformance . 31
4.3.8 Receiver selectivity . 31
4.3.8.1 Definition . 31
4.3.8.2 Performance criteria . 32
4.3.8.3 Limits . 32
4.3.8.4 Conformance . 32
4.3.9 Mechanical and electrical design . 32
4.3.9.1 Power feeding . 32
4.3.9.1.1 Description of types of power supply . 32
4.3.9.1.2 Wired power connection equipment . 33
4.3.9.2 Antenna design . 33
4.3.9.2.1 Description of types of antenna design . 33
4.3.9.2.2 Integral antenna . 33
4.3.9.3 Conformance . 33
4.3.10 User Access Restrictions . 33
4.3.10.1 Definition . 33
4.3.10.2 Requirements . 33
4.3.10.3 Conformance . 33
5 Testing for compliance with technical requirements . 34
5.1 Environmental conditions for testing . 34
5.1.1 Introduction. 34
5.1.2 Normal test conditions . 34
5.1.2.1 Normal temperature and humidity . 34
5.1.2.2 Normal power source . 34
5.1.3 Extreme test conditions . 34
5.2 Interpretation of the measurement results . 34
5.3 Definition of other test conditions . 35
5.3.1 Test sequences . 35
5.3.2 Test channels . 35
5.3.3 Antennas . 36
5.3.3.1 Integrated and dedicated antennas . 36
5.3.3.2 Transmit operating modes . 36
5.3.3.2.1 Operating mode 1 (single antenna) . 36
5.3.3.2.2 Operating mode 2 (multiple antennas, no beamforming) . 37
5.3.3.2.3 Operating mode 3 (multiple antennas, with beamforming) . 37
5.3.4 Presentation of equipment . 37
5.3.5 Measurement methods . 37
5.4 Essential radio test suites . 38
5.4.1 Product information . 38
5.4.2 Nominal centre frequencies . 39
5.4.2.1 Test conditions . 39
5.4.2.2 Test methods . 39
5.4.2.2.1 Conducted measurement. 39
5.4.2.2.2 Radiated measurement . 40
5.4.2.2.3 Test fixture measurement . 40
5.4.3 RF output power . 40
5.4.3.1 Test conditions . 40
5.4.3.2 Test methods . 41
5.4.3.2.1 Conducted measurement. 41
5.4.3.2.2 Radiated measurement . 42
5.4.3.2.3 Test fixture measurement . 43
5.4.4 Power Spectral Density . 43
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 303 687 V1.1.0:2023
5 Draft ETSI EN 303 687 V1.1.0 (2023-03)
5.4.4.1 Test conditions . 43
5.4.4.2 Test methods . 43
5.4.4.2.1 Conducted measurement. 43
5.4.4.2.2 Radiated measurement . 46
5.4.4.2.3 Test fixture measurement . 46
5.4.5 Transmitter unwanted emissions outside the 6 GHz WAS/RLAN band . 46
5.4.5.1 Test conditions . 46
5.4.5.2 Test method . 46
5.4.5.2.1 Conducted measurement. 46
5.4.5.2.2 Radiated measurement . 49
5.4.5.2.3 Test fixture measurement . 49
5.4.6 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 49
5.4.6.1 Test conditions . 49
5.4.6.2 Test method . 49
5.4.6.2.1 Conducted measurement. 49
5.4.6.2.2 Radiated measurement . 51
5.4.6.2.3 Test fixture measurement . 51
5.4.7 Receiver spurious emissions . 51
5.4.7.1 Test conditions . 51
5.4.7.2 Test methods . 52
5.4.7.2.1 Conducted measurement. 52
5.4.7.2.2 Radiated measurement . 54
5.4.7.2.3 Test fixture measurement . 54
5.4.8 Channel access mechanism . 54
5.4.8.1 Test conditions . 54
5.4.8.2 Test method for FBE . 54
5.4.8.2.1 Additional test conditions . 54
5.4.8.2.2 Conducted measurements . 54
5.4.8.2.3 Generic test procedure for measuring channel/frequency usage . 58
5.4.8.2.4 Radiated measurements . 58
5.4.8.2.5 Test fixture measurement . 59
5.4.8.3 Test method for LBE . 59
5.4.8.3.1 Additional test conditions . 59
5.4.8.3.2 Conducted measurements . 59
5.4.8.3.3 Generic test procedure for measuring channel/frequency usage . 67
5.4.8.3.4 Radiated measurements . 67
5.4.8.3.5 Test fixture measurement . 68
5.4.9 Receiver blocking . 68
5.4.9.1 Test conditions . 68
5.4.9.2 Test methods . 68
5.4.9.2.1 Conducted measurement. 68
5.4.9.2.2 Radiated measurement . 69
5.4.9.2.3 Test fixture measurement . 69
5.4.10 Receiver selectivity . 70
5.4.10.1 Test conditions . 70
5.4.10.2 Test methods . 70
5.4.10.2.1 Conducted measurement. 70
5.4.10.2.2 Radiated measurements . 71
5.4.10.2.3 Tes
...
SLOVENSKI STANDARD
oSIST prEN 303 687 V1.0.0:2022
01-julij-2022
6 GHz WAS/RLAN - Harmonizirani standard za dostop do radijskega spektra
6 GHz WAS/RLAN Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 303 687 V1.0.0 (2022-04)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
oSIST prEN 303 687 V1.0.0:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 303 687 V1.0.0:2022
---------------------- Page: 2 ----------------------
oSIST prEN 303 687 V1.0.0:2022
Draft ETSI EN 303 687 V1.0.0 (2022-04)
HARMONISED EUROPEAN STANDARD
6 GHz WAS/RLAN;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
oSIST prEN 303 687 V1.0.0:2022
2 Draft ETSI EN 303 687 V1.0.0 (2022-04)
Reference
DEN/BRAN-230021
Keywords
access, broadband, LAN, radio, regulation, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 303 687 V1.0.0:2022
3 Draft ETSI EN 303 687 V1.0.0 (2022-04)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 12
3.1 Terms . 12
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 Equipment categories . 15
4.2.1 Description of categories . 15
4.2.2 LPI category. 15
4.2.3 VLP category . 15
4.3 Conformance requirements . 16
4.3.1 Nominal centre frequencies and nominal bandwidth . 16
4.3.1.1 General . 16
4.3.1.2 Definition . 16
4.3.1.3 Limits . 16
4.3.1.4 Conformance . 16
4.3.2 RF output power . 16
4.3.2.1 Definition . 16
4.3.2.2 Limits . 17
4.3.2.3 Conformance . 17
4.3.3 Power Spectral Density . 17
4.3.3.1 Definition . 17
4.3.3.2 Limits . 17
4.3.3.3 VLP NB usage with a PSD above 1 dBm/MHz . 17
4.3.3.4 Conformance . 18
4.3.4 Transmitter unwanted emissions . 18
4.3.4.1 Transmitter unwanted emissions in the out-of-band domain . 18
4.3.4.1.1 Definition. 18
4.3.4.1.2 Limits . 18
4.3.4.1.3 Conformance . 18
4.3.4.2 Transmitter unwanted emissions in the spurious domain . 18
4.3.4.2.1 Definition. 18
4.3.4.2.2 Limits . 19
4.3.4.2.3 Conformance . 19
4.3.4.3 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 19
4.3.4.3.1 Definition. 19
4.3.4.3.2 Limits . 19
4.3.4.3.3 Conformance . 21
4.3.5 Receiver spurious emissions . 22
4.3.5.1 Definition . 22
4.3.5.2 Limits . 22
4.3.5.3 Conformance . 22
4.3.6 Channel access mechanism . 22
4.3.6.1 Applicability. 22
4.3.6.2 Definition . 22
4.3.6.3 Requirements and limits . 22
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 303 687 V1.0.0:2022
4 Draft ETSI EN 303 687 V1.0.0 (2022-04)
4.3.6.3.1 Channel access mechanism for Frame Based Equipment (FBE) . 22
4.3.6.3.2 Channel access mechanism for Load Based Equipment (LBE) . 24
4.3.6.3.3 ED Threshold level (Energy Detection Threshold level, FBE and LBE) . 29
4.3.6.3.4 Short Control Signalling transmissions (FBE and LBE) . 30
4.3.6.4 Conformance . 30
4.3.7 Receiver blocking . 30
4.3.7.1 Definition . 30
4.3.7.2 Performance criteria . 30
4.3.7.3 Limits . 30
4.3.7.4 Conformance . 31
4.3.8 Receiver selectivity . 31
4.3.8.1 Definition . 31
4.3.8.2 Performance criteria . 32
4.3.8.3 Limits . 32
4.3.8.4 Conformance . 32
4.3.9 Mechanical and electrical design . 32
4.3.9.1 Power feeding . 32
4.3.9.1.1 Description of types of power supply . 32
4.3.9.1.2 Wired power connection equipment . 33
4.3.9.2 Antenna design . 33
4.3.9.2.1 Description of types of antenna design . 33
4.3.9.2.2 Integral antenna . 33
4.3.9.3 Conformance . 33
4.3.10 User Access Restrictions . 33
4.3.10.1 Definition . 33
4.3.10.2 Requirements . 33
4.3.10.3 Conformance . 33
5 Testing for compliance with technical requirements . 34
5.1 Environmental conditions for testing . 34
5.1.1 Introduction. 34
5.1.2 Normal test conditions . 34
5.1.2.1 Normal temperature and humidity . 34
5.1.2.2 Normal power source . 34
5.1.3 Extreme test conditions . 34
5.2 Interpretation of the measurement results . 34
5.3 Definition of other test conditions . 34
5.3.1 Test sequences . 34
5.3.2 Test channels . 35
5.3.3 Antennas . 36
5.3.3.1 Integrated and dedicated antennas . 36
5.3.3.2 Transmit operating modes . 36
5.3.3.2.1 Operating mode 1 (single antenna) . 36
5.3.3.2.2 Operating mode 2 (multiple antennas, no beamforming) . 37
5.3.3.2.3 Operating mode 3 (multiple antennas, with beamforming) . 37
5.3.4 Presentation of equipment . 37
5.3.5 Measurement methods . 37
5.4 Essential radio test suites . 38
5.4.1 Product information . 38
5.4.2 Nominal centre frequencies . 39
5.4.2.1 Test conditions . 39
5.4.2.2 Test methods . 39
5.4.2.2.1 Conducted measurement. 39
5.4.2.2.2 Radiated measurement . 40
5.4.2.2.3 Test fixture measurement . 40
5.4.3 RF output power . 40
5.4.3.1 Test conditions . 40
5.4.3.2 Test methods . 41
5.4.3.2.1 Conducted measurement. 41
5.4.3.2.2 Radiated measurement . 42
5.4.3.2.3 Test fixture measurement . 43
5.4.4 Power Spectral Density . 43
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 303 687 V1.0.0:2022
5 Draft ETSI EN 303 687 V1.0.0 (2022-04)
5.4.4.1 Test conditions . 43
5.4.4.2 Test methods . 43
5.4.4.2.1 Conducted measurement. 43
5.4.4.2.2 Radiated measurement . 46
5.4.4.2.3 Test fixture measurement . 46
5.4.5 Transmitter unwanted emissions outside the 6 GHz WAS/RLAN band . 46
5.4.5.1 Test conditions . 46
5.4.5.2 Test method . 46
5.4.5.2.1 Conducted measurement. 46
5.4.5.2.2 Radiated measurement . 49
5.4.5.2.3 Test fixture measurement . 49
5.4.6 Transmitter unwanted emissions within the 6 GHz WAS/RLAN band . 49
5.4.6.1 Test conditions . 49
5.4.6.2 Test method . 49
5.4.6.2.1 Conducted measurement. 49
5.4.6.2.2 Radiated measurement . 51
5.4.6.2.3 Test fixture measurement . 51
5.4.7 Receiver spurious emissions . 51
5.4.7.1 Test conditions . 51
5.4.7.2 Test methods . 52
5.4.7.2.1 Conducted measurement. 52
5.4.7.2.2 Radiated measurement . 54
5.4.7.2.3 Test fixture measurement . 54
5.4.8 Channel access mechanism . 54
5.4.8.1 Test conditions . 54
5.4.8.2 Test method for FBE . 54
5.4.8.2.1 Additional test conditions . 54
5.4.8.2.2 Conducted measurements . 54
5.4.8.2.3 Generic test procedure for measuring channel/frequency usage . 58
5.4.8.2.4 Radiated measurements . 58
5.4.8.2.5 Test fixture measurement . 59
5.4.8.3 Test method for LBE . 59
5.4.8.3.1 Additional test conditions . 59
5.4.8.3.2 Conducted measurements . 59
5.4.8.3.3 Generic test procedure for measuring channel/frequency usage . 67
5.4.8.3.4 Radiated measurements . 67
5.4.8.3.5 Test fixture measurement . 68
5.4.9 Receiver blocking . 68
5.4.9.1 Test conditions . 68
5.4.9.2 Test methods . 68
5.4.9.2.1 Conducted measurement. 68
5.4.9.2.2 Radiated measurement . 69
5.4.9.2.3 Test fixture measurement . 69
5.4.10 Receiver selectivity . 70
5.4.10.1 Test conditions . 70
5.4.10.2 Test methods . 70
5.4.10.2.1 Conducted measurement. 70
5.4.10.2.2 Radiated measurements . 71
5.4.10.2.3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.