Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN simulation services; Anonymous Communication Rejection (ACR) and Communication Barring (CB); Part 2: Test Suite Structure and Test Purposes (TSS&TP)

RTS/TISPAN-06056-2-NGN-R2

General Information

Status
Published
Publication Date
19-Jul-2009
Technical Committee
Current Stage
12 - Completion
Due Date
17-Jul-2009
Completion Date
20-Jul-2009
Ref Project

Buy Standard

Standard
ETSI TS 186 017-2 V2.1.1 (2009-07) - Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN simulation services; Anonymous Communication Rejection (ACR) and Communication Barring (CB); Part 2: Test Suite Structure and Test Purposes (TSS&TP)
English language
15 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ETSI TS 186 017-2 V2.1.1 (2009-07)
Technical Specification

Telecommunications and Internet converged Services and
Protocols for Advanced Networking (TISPAN);
PSTN/ISDN simulation services;
Anonymous Communication Rejection (ACR) and
Communication Barring (CB);
Part 2: Test Suite Structure and Test Purposes (TSS&TP)

---------------------- Page: 1 ----------------------
2 ETSI TS 186 017-2 V2.1.1 (2009-07)



Reference
RTS/TISPAN-06056-2-NGN-R2
Keywords
CB, IMS, testing, TSS&TP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 186 017-2 V2.1.1 (2009-07)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Test Suite Structure (TSS) . 6
4.1 Configuration . 7
4.1.1 Testing of the AS . 7
5 Test Purposes (TP) . 7
5.1 Introduction . 7
5.1.1 TP naming convention . 8
5.1.2 Test strategy . 8
5.2 TPs for Anonymous Communication Rejection (ACR) . 8
5.2.1 Action for ACR at the terminating AS. 8
5.3 TPs for Communication Barring (CB) . 10
5.3.1 Actions for OCB at the originating AS . 10
5.3.2 Actions for ICB at the terminating AS. 11
5.4 Interaction with other simulation services . 12
5.4.1 Originating Identification Presentation (OIP) . 12
5.4.2 Communication Diversion services (CDIV) . 12
Annex A (informative): Change history . 14
History . 15

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 186 017-2 V2.1.1 (2009-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 2 of a multi-part deliverable covering the Anonymous Communication Rejection (ACR)
and Communication Barring (CB) simulation services, as identified below:
Part 1: "Protocol Implementation Conformance Statement (PICS)";
Part 2: "Test Suite Structure and Test Purposes (TSS&TP)";
Part 3: "Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) proforma
specification".
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 186 017-2 V2.1.1 (2009-07)
1 Scope
The present document specifies the test suite structure and test purposes of the Anonymous Communication Rejection
(ACR) and Communication Barring (CB) simulation service, based on stage three of the IMS simulation service
Anonymous Call Rejection (ACR), Incoming Communication Barring (ICB) and Outgoing Communication Barring
(OCB). Within the Next Generation Network (NGN) the stage 3 description is specified using the IP-Multimedia Call
Control Protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP).
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI TS 183 011: "Telecommunications and Internet converged Services and Protocols for
Advanced Networking (TISPAN); PSTN/ISDN simulation services: Anonymous Communication
Rejection (ACR) and Communication Barring (CB); Protocol specification".
[2] ETSI TS 181 002: "Telecommunications and Internet converged Services and Protocols for
Advanced Networking (TISPAN); Multimedia Telephony with PSTN/ISDN simulation services".
[3] IETF RFC 3261: "SIP: Session Initiation Protocol".
[4] ETSI TS 186 017-1: "Telecommunications and Internet Converged Services and Protocols for
Advanced Networking (TISPAN); PSTN/ISDN simulation services: Anonymous Communication
Rejection (ACR) and Communication Barring (CB); Part 1: Protocol Implementation
Conformance Statement (PICS)".
[5] ETSI TS 186 005-1: "Telecommunications and Internet Converged Services and Protocols for
Advanced Networking (TISPAN); Terminating Identification Presentation (TIP) and Terminating
Identification Restriction (TIR); Part 1: Protocol Implementation Conformance Statement (PICS)".
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 186 017-2 V2.1.1 (2009-07)
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
Not applicable.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in TS 181 002 [2] and the following apply:
escaped character: See RFC 3261 [3].
NOTE: This may contain additional information.
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ACR Anonymous Communication Rejection
AS Application Server
CB Communication Barring
CDIV Communication DIVersion services
CFU Communication Forwarding Unconditional
IBC Incoming Communication Barring
ICB Incoming Communication Barring
IMS IP Multimedia Subsystem
IP Internet Protocol
ISC IMS Service Control
NGN Next Generation Network
NNI Network to Network Interface
OBC Outgoing Communication Barring
OCB Outgoing Communication Barring
OIP Originating Identification Presentation
PICS Protocol Implementation Conformance Statement
SDP Session Description Protocol
SIP Session Initiation Protocol
TP Test Purposes
TSS Test Suite Structure
4 Test Suite Structure (TSS)
ACR-CB
ACR_terminating_AS ACR-CB_N01_xxx
OBC_originating_AS ACR-CB_N02_xxx
IBC_terminating_AS ACR-CB_N03_xxx
interaction_OIP ACR-CB_N04_xxx
interaction_CDIV ACR-CB_N05_xxx

ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 186 017-2 V2.1.1 (2009-07)
4.1 Configuration
The scope of the current specification is to test the signalling and procedural aspects of the stage 3 requirements as
described in TS 183 011 [1]. The stage 3 description describes the requirements for several network
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.