Integrated Services Digital Network (ISDN); Advice of Charge (AOC) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network

REN/SPS-05145-K-5

Digitalno omrežje z integriranimi storitvami (ISDN) – Dopolnilna storitev: obvestilo o ceni (AOC) – Protokol digitalne naročniške signalizacije št. 1 (DSS1) – 5. del: Zgradba preskušalnega niza in nameni preskušanja (TSS&TP) – Specifikacija za omrežje

General Information

Status
Published
Publication Date
28-Jun-1998
Technical Committee
Current Stage
12 - Completion
Due Date
03-Jul-1998
Completion Date
29-Jun-1998

Buy Standard

Standard
EN 300 182-5 V1.2.4:2003
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RPUHåMHIntegrated Services Digital Network (ISDN); Advice of Charge (AOC) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 300 182-5 Version 1.2.4SIST EN 300 182-5 V1.2.4:2003en01-december-2003SIST EN 300 182-5 V1.2.4:2003SLOVENSKI
STANDARD



SIST EN 300 182-5 V1.2.4:2003



EN 300 182-5 V1.2.4 (1998-06)European Standard (Telecommunications series)Integrated Services Digital Network (ISDN);Advice of Charge (AOC) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the networkSIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)2ReferenceREN/SPS-05145-K-5 (1op90iqo.PDF)KeywordsISDN, DSS1, supplementary service, AOC,testing, TSS&TP, networkETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frhttp://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)3ContentsIntellectual Property Rights.4Foreword.41Scope.52Normative references.53Definitions.63.1Definitions related to conformance testing.63.2Definitions related to EN 300 182-1.64Abbreviations.75Test Suite Structure (TSS).76Test Purposes (TP).86.1Introduction.86.1.1TP naming convention.86.1.2Source of TP definition.86.1.3TP structure.86.1.4Test strategy.96.2Network TPs for AOC.96.2.1Valid behaviour.96.2.1.1Subscription option dependent.96.2.1.1.1Per-call basis.96.2.1.1.2All calls.126.2.1.1.2.1Activation.126.2.1.1.2.1.1Normal.126.2.1.1.2.1.2Exceptions.126.2.1.2Subscription option independent.156.2.1.2.1Independent of bearer.156.2.1.2.1.1Normal.156.2.1.2.1.2GFP.166.2.1.2.2Transfer - active phase.166.2.1.2.3Transfer - clearing phase.176.2.2Syntactically invalid behaviour.256.2.3Inopportune behaviour.257Compliance.268Requirements for a comprehensive testing service.26Annex A (informative):Changes with respect to the previous ETS 300 182-5.27History.28SIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)4Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 5 of a multi-part standard covering the Digital Subscriber Signalling System No. one(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) Advice of Charge (AOC)supplementary service, as described below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user";Part 5:"Test Suite Structure and Test Purposes (TSS&TP) specification for the network";Part 6:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network".The present version updates the references to the basic call specifications.National transposition datesDate of adoption of this EN:19 June 1998Date of latest announcement of this EN (doa):30 September 1998Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 March 1999Date of withdrawal of any conflicting National Standard (dow):31 March 1999SIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)51ScopeThis fifth part of EN 300 182 specifies the Test Suite Structure and Test Purposes (TSS&TP) for the Network side ofthe T reference point or coincident S and T reference point (as defined in ITU-T Recommendation I.411 [7]) ofimplementations conforming to the stage three standard for the Advice of Charge (AOC) supplementary service for thepan-European Integrated Services Digital Network (ISDN) by means of the Digital Subscriber Signalling System No.one (DSS1) protocol, EN 300 182-1 [1].A further part of this EN specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Informationfor Testing (PIXIT) proforma based on the present document. Other parts specify the TSS&TP and the ATS and partialPIXIT proforma for the User side of the T reference point or coincident S and T reference point of implementationsconforming to EN 300 182-1 [1].2Normative referencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]EN 300 182-1 (V1.2): "Integrated Services Digital Network (ISDN); Advice of Charge (AOC)supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:Protocol specification".[2]EN 300 182-2 (V1.2): "Integrated Services Digital Network (ISDN); Advice of Charge (AOC)supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2:Protocol Implementation Conformance Statement (PICS) proforma specification".[3]ISO/IEC 9646-1: "Information Technology - OSI Conformance Testing Methodology andFramework; Part 1: General Concepts".[4]ISO/IEC 9646-2: "Information Technology - OSI Conformance Testing Methodology andFramework; Part 2: Abstract Test Suite specification".[5]ISO/IEC 9646-3: "Information Technology - OSI Conformance Testing Methodology andFramework; Part 3: The Tree and Tabular Combined Notation".[6]ETS 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for thesupport of supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification".[7]ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces - Reference configurations".[8]EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1:Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".[9]ITU-T Recommendation I.112: "Vocabulary and terms for ISDNs".[10]CCITT Recommendation E.164: "Numbering plan for the ISDN era".SIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)6[11]ITU-T Recommendation I.210: "Principles of the telecommunication services supported by anISDN and the means to describe them".3DefinitionsFor the purposes of the present document, the following definitions apply:3.1Definitions related to conformance testingabstract test case: Refer to ISO/IEC 9646-1 [3].Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 [3].Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [3].implicit send event: Refer to ISO/IEC 9646-3 [5].lower tester: Refer to ISO/IEC 9646-1 [3].point of control and observation: Refer to ISO/IEC 9646-1 [3].Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 [3].PICS proforma: Refer to ISO/IEC 9646-1 [3].Protocol Implementation eXtra Information for Testing (PIXIT): Refer to ISO/IEC 9646-1 [3].PIXIT proforma: Refer to ISO/IEC 9646-1 [3].system under test: Refer to ISO/IEC 9646-1 [3].Test Purpose (TP): Refer to ISO/IEC 9646-1 [3].3.2Definitions related to EN 300 182-1call reference: See EN 300 403-1 [8], subclause 4.3.component: See ETS 300 196-1 [6], subclause 11.2.2.1.Integrated Services Digital Network (ISDN): See ITU-T Recommendation I.112 [9], definition 308.invoke component: See ETS 300 196-1 [6], subclause 11.2.2.1.ISDN number: A number conforming to the numbering and structure specified in CCITT Recommendation E.164 [10].network: The DSS1 protocol entity at the Network side of the user-network interface where a T reference point orcoincident S and T reference point applies.network (S/T): The DSS1 protocol entity at the network side of the user-network interface where a coincident S and Treference point applies.network (T): The DSS1 protocol entity at the Network side of the user-network interface where a T reference pointapplies (Network connected to Private ISDN).return error component: See ETS 300 196-1 [6], subclause 11.2.2.1.return result component: See ETS 300 196-1 [6], subclause 11.2.2.1.served user: The served user is the user who invokes the AOC supplementary service.service; telecommunication service: See ITU-T Recommendation I.112 [9], definition 201.SIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)7supplementary service: See ITU-T Recommendation I.210 [11], subclause 2.4.4AbbreviationsFor the purposes of the present document, the following abbreviations apply:AOCAdvice of ChargeATMAbstract Test MethodATSAbstract Test SuiteDSS1Digital Subscriber Signalling System No. oneGFPGeneric Functional ProtocolISDNIntegrated Services Digital NetworkIUTImplementation Under TestN00Null call stateN02Overlap Sending call stateN03Outgoing Call Proceeding call stateN04Call Delivered call stateN06Call Present call stateN07Call Received call stateN08Connect Request call stateN09Incoming Call Proceeding call stateN10Active call stateN12Disconnect Indication call stateN19Release Request call stateN25Overlap Receiving call stateTPTest PurposeTSSTest Suite Structure5Test Suite Structure (TSS)AOC - NetworkValidSyntactically invalidInopportune(08)(09)Subscription option dependentSubscription option independentPer-call basisAll callsTransfer -Transfer -(01)active phaseclearing phase(06)(07)ActivationIndependent of bearerNormal(02)Exceptions(03)Normal(04)GFP(05)NOTE:Numbers in brackets represent group numbers and are used in TP identifiers.Figure 1: Test suite structureSIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)86Test Purposes (TP)6.1IntroductionFor each test requirement a TP is defined.6.1.1TP naming conventionTPs are numbered, starting at 001, within each group. Groups are organized according to the TSS. Additional referencesare added to identify the actual test suite and whether it applies to the network or the user (see table 1).Table 1: TP identifier naming convention schemeIdentifier:__=supplementary service:e.g. "AOC"=type of IUT:UUserNNetwork=group2 digit field representing group reference according to TSS=sequential number(001-999)6.1.2Source of TP definitionThe TPs are based on EN 300 182-1 [1].6.1.3TP structureEach TP has been written in a manner which is consistent with all other TPs. The intention of this is to make the TPsmore readable and checkable. A particular structure has been used and this is illustrated in table 2. This table should beread in conjunction with any TP, i.e. use a TP as an example to fully understand the table.SIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)9Table 2: Structure of a single TPTP partTextExampleHeader tabsee table 1 tabsubclause 0.0.0 tabvalid, invalid, inopportune CRmandatory, optional, conditionalStimulusEnsure that the IUT in theN10 etc./ /AOC-S Idle,. see below for message structurereceiving a XXXX messageor to request a .Reactionsends, saves, does, etc.using en bloc sending, .if the action is sending
see below for message structure, etc.and remains in the same stateor and enters state Messagestructuremessage containing aSETUP, FACILITY, CONNECT, …a) information element withb) a encoded as or including and back to a or b,Bearer capability, Facility, .NOTE:Text in italics will not appear in TPs and text between <> is filled in for each TP and may differ from oneTP to the next.6.1.4Test strategyAs the base standard EN 300 182-1 [1] contains no explicit requirements for testing, the TPs were generated as a resultof an analysis of the base standard and the PICS specification EN 300 182-2 [2]. The criteria applied include thefollowing:-only the requirements from the point of view of the T or coincident S and T reference point are considered;-whether or not a test case can be built from the TP is not considered.6.2Network TPs for AOCAll PICS items referred to in this subclause are as specified in EN 300 182-2 [2] unless indicated otherwise by anothernumbered reference.6.2.1Valid behaviour6.2.1.1Subscription option dependent6.2.1.1.1Per-call basisAOC_N01_001subclause 9.2.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message including a Facility information elementcoded as ChargingRequest invoke component indicating the AOC-S service and charging information is available,returns a ChargingRequest return result component indicating "AOCSCurrencyInfoList" or"AOCSSpecialArrInfo" in a Facility information element in either a SETUP ACKNOWLEDGE, CALLPROCEEDING, PROGRESS, ALERTING, CONNECT or a FACILITY message and enters the AOC-S Idlestate and continues normal call handling.Selection:AOC-S supported. PICS: MC 10.Selection:The supply of charging information is controllable.SIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)10AOC_N01_002subclause 9.2.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message including a Facility information elementcoded as ChargingRequest invoke component indicating the AOC-S service and charging information is not available,returns a ChargingRequest return error component indicating "NoChargingInfoAvailable" or indicating a generalerror in a Facility information element in either a SETUP ACKNOWLEDGE, CALL PROCEEDING,PROGRESS, ALERTING, CONNECT or a FACILITY message and continues normal call handling and remainsin AOC Idle state.Selection:AOC-S supported. PICS: MC 10.Selection:The supply of charging information is controllable.AOC_N01_003subclause 9.2.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message including a Facility information elementcoded as ChargingRequest invoke component indicating the AOC-S service and charging information is available,returns a ChargingRequest return result component indicating "AOCSCurrencyInfoList" or"AOCSSpecialArrInfo" in a Facility information element in either a SETUP ACKNOWLEDGE, CALLPROCEEDING, PROGRESS, ALERTING, CONNECT or a FACILITY message and enters the AOC-S Idlestate and continues normal call handlingor when no charging information is available,returns a ChargingRequest return error component indicating "NoChargingInfoAvailable" or indicating a generalerror in a Facility information element in either a SETUP ACKNOWLEDGE, CALL PROCEEDING,PROGRESS, ALERTING, CONNECT or a FACILITY message and continues normal call handling and remainsin AOC Idle state.Selection:AOC-S supported. PICS: MC 10.Selection:The supply of charging information is not controllable.AOC_N01_004subclause 9.1.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message including a Facility information elementcoded as ChargingRequest invoke component indicating the AOC-D service and charging information is available,returns a ChargingRequest return result component indicating "chargingInfoFollows" in a Facility informationelement in either a SETUP ACKNOWLEDGE, CALL PROCEEDING, PROGRESS, ALERTING, CONNECTor a FACILITY message and enters the AOC-D Activated state and continues normal call handling.Selection:AOC-D supported. PICS: MC 11.Selection:The supply of charging information is controllable.AOC_N01_005subclause 9.1.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message including a Facility information elementcoded as ChargingRequest invoke component indicating the AOC-D service and charging information is not available,returns a ChargingRequest return error component indicating "NoChargingInfoAvailable" or indicating a generalerror in a Facility information element in either a SETUP ACKNOWLEDGE, CALL PROCEEDING,PROGRESS, ALERTING, CONNECT or a FACILITY message and continues normal call handling and remainsin state AOC Idle.Selection:AOC-D supported. PICS: MC 11.Selection:The supply of charging information is controllable.SIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)11AOC_N01_006subclause 9.1.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message including a Facility information elementcoded as ChargingRequest invoke component indicating the AOC-D service and charging information is available,returns a ChargingRequest return result component indicating "chargingInfoFollows" in a Facility informationelement in either a SETUP ACKNOWLEDGE, CALL PROCEEDING, PROGRESS, ALERTING, CONNECTor a FACILITY message and enters the AOC-D Activated state and continues normal call handlingor when no charging information is available,returns a ChargingRequest return error component indicating "NoChargingInfoAvailable" or indicating a generalerror in a Facility information element in either a SETUP ACKNOWLEDGE, CALL PROCEEDING,PROGRESS, ALERTING, CONNECT or a FACILITY message and continues normal call handling and remainsin state AOC Idle.Selection:AOC-D supported. PICS: MC 11.Selection:The supply of charging information is not controllable.AOC_N01_007subclause 9.1.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message including a Facility information elementcoded as ChargingRequest invoke component indicating the AOC-E service and charging information is available,returns a ChargingRequest return result component indicating "chargingInfoFollows" in a Facility informationelement in either a SETUP ACKNOWLEDGE, CALL PROCEEDING, PROGRESS, ALERTING, CONNECTor a FACILITY message and enters the AOC-E Activated state and continues normal call handling.Selection:AOC-E supported. PICS: MC 12.Selection:The supply of charging information is controllable.AOC_N01_008subclause 9.1.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message including a Facility information elementcoded as ChargingRequest invoke component indicating the AOC-E service and charging information is not available,returns a ChargingRequest return error component indicating "NoChargingInfoAvailable" or indicating a generalerror in a Facility information element in either a SETUP ACKNOWLEDGE, CALL PROCEEDING,PROGRESS, ALERTING, CONNECT or a FACILITY message and continues normal call handling and remainsin state AOC Idle.Selection:AOC-E supported. PICS: MC 12.Selection:The supply of charging information is controllable.AOC_N01_009subclause 9.1.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message including a Facility information elementcoded as ChargingRequest invoke component indicating the AOC-E service and charging information is available,returns a ChargingRequest return result component indicating "chargingInfoFollows" in a Facility informationelement in either a SETUP ACKNOWLEDGE, CALL PROCEEDING, PROGRESS, ALERTING, CONNECTor a FACILITY message and enters the AOC-E Activated state and continues normal call handlingor when no charging information is available,returns a ChargingRequest return error component indicating "NoChargingInfoAvailable" or indicating a generalerror in a Facility information element in either a SETUP ACKNOWLEDGE, CALL PROCEEDING,PROGRESS, ALERTING, CONNECT or a FACILITY message and continues normal call handling and remainsin state AOC Idle.Selection:AOC-E supported. PICS: MC 12.Selection:The supply of charging information is not controllable.SIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)126.2.1.1.2All calls6.2.1.1.2.1Activation6.2.1.1.2.1.1NormalAOC_N02_001subclause 9.2.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message NOT including a ChargingRequest invokecomponent indicating the AOC-S service and charging information is available,returns an AOCSCurrency invoke component indicating "AOCSCurrencyInfoList" or an AOCSSpecialArrinvoke component indicating "AOCSSpecialArrInfo" in a Facility information element in either a SETUPACKNOWLEDGE, CALL PROCEEDING, PROGRESS, ALERTING, CONNECT or a FACILITY messageand enters the AOC-S Idle state and continues normal call handling.Selection:AOC-S supported. PICS: MC 10.Selection:The supply of charging information is controllable.AOC_N02_002subclause 9.2.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message NOT including a ChargingRequest invokecomponent indicating the AOC-S service and charging information is not available,returns an AOCSCurrency or an AOCSSpecialArr invoke component indicating "chargeNotAvailable" in aFacility information element in either a SETUP ACKNOWLEDGE, CALL PROCEEDING, PROGRESS,ALERTING, CONNECT or a FACILITY message and continues normal call handling and remains in state AOCIdle.Selection:AOC-S supported. PICS: MC 10.Selection:The supply of charging information is controllable.AOC_N02_003subclause 9.2.1validoptionalEnsure that the IUT in state N00/AOC Idle on receipt of a SETUP message NOT including a ChargingRequest invokecomponent indicating the AOC-S service and charging information is available,returns an AOCSCurrency invoke component indicating "AOCSCurrencyInfoList" or an AOCSSpecialArrinvoke component indicating "AOCSSpecialArrInfo" in a Facility information element in either a SETUPACKNOWLEDGE, CALL PROCEEDING, PROGRESS, ALERTING, CONNECT or a FACILITY messageand enters the AOC-S Idle state and continues normal call handlingor when no charging information is available,returns an AOCSCurrency or an AOCSSpecialArr invoke component indicating "chargeNotAvailable" in aFacility information element in either a SETUP ACKNOWLEDGE, CALL PROCEEDING, PROGRESS,ALERTING, CONNECT or a FACILITY message and continues normal call handling and remains in state AOCIdle.Selection:AOC-S supported. PICS: MC 10.Selection:The supply of charging information is not controllable.6.2.1.1.2.1.2ExceptionsAOC_N03_001subclause 9.1.2 i)validoptionalEnsure that the IUT in the state N00/AOC Idle, on receipt of a SETUP message including a Facility information elementcoded as ChargingRequest invoke component indicating the AOC-S service and charging information is available,returns aChargingRequest return result component indicating "AOCSCurrencyInfoList" or"AOCSSpecialArrInfo" in a Facility information element in either a SETUP ACKNOWLEDGE, CALLPROCEEDING, PROGRESS, ALERTING, CONNECT or a FACILITY message and enters the AOC-S Idlestate.Selection:AOC-S supported. PICS: MC 10.Selection:The supply of charging information is controllable.SIST EN 300 182-5 V1.2.4:2003



ETSIEN 300 182-5 V1.2.4 (1998-06)13AOC_N03_002subclause 9.1.2 i)validoptionalEnsure that the IUT in the state N00/AOC Idle, on receipt of a SETUP message including a Facility information elementcoded as ChargingRequest invoke component indicating the AOC-S service and charging information is not available,returns a ChargingRequest return error component indicating "NoChargingInfoAvailable" in a Facilityinformation element in either a SETUP ACKNOWLEDGE, CALL PROCEEDING, PROGRESS, ALERTING,CONNECT or a FACILITY message and continues normal call handling and remains in state AOC Idle.Selection:AOC-S supported. PICS: MC 10.Selection:The supply of charging information is controllable.AOC_N03_003subclause 9.1.2 i)validoptionalEnsure that the IUT in the state N00/AOC Idle, on receipt of a SETUP message including a Facility informati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.