ETSI EN 300 417-3-2 V1.1.4 (1999-05)

Transmission and Multiplexing (TM); Generic requirements of transport functionality of equipment; Part 3-2: Synchronous Transport Module-N (STM-N) regenerator and multiplex section layer functions; Implementation Conformance Statement (ICS) proforma specification

REN/TM-01015-3-2b

Prenos in multipleksiranje (TM) – Generične zahteve za prenosno funkcionalnost opreme – 3-2. del: Funkcije plasti regeneratorskega in multipleksnega odseka za sinhroni prenosni modul-N (STM-N) – Proforma specifikacija izjave o skladnosti izvedbe (ICS)

General Information

• Status: Published
• Publication Date: 09-May-1999
• Technical Committee: TM 1 - TM Core networks, fibres and cables
• Current Stage: 12 - Completion
• Due Date: 07-May-1999
• Completion Date: 10-May-1999
• Ref Project: SIST EN 300 417-3-2 V1.1.4:2003 - Transmission and Multiplexing (TM); Generic requirements of transport functionality of equipment; Part 3-2: Synchronous Transport Module-N (STM-N) regenerator and multiplex section layer functions; Implementation Conformance Statement (ICS) proforma specification

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.XQNFLRQDOQRVWTransmission and Multiplexing (TM); Generic requirements of transport functionality of equipment; Part 3-2: Synchronous Transport Module-N (STM-N) regenerator and multiplex section layer functions; Implementation Conformance Statement (ICS) proforma specification33.040.20Prenosni sistemTransmission systemsICS:Ta slovenski standard je istoveten z:EN 300 417-3-2 Version 1.1.4SIST EN 300 417-3-2 V1.1.4:2003en01-december-2003SIST EN 300 417-3-2 V1.1.4:2003SLOVENSKI
STANDARD



SIST EN 300 417-3-2 V1.1.4:2003



EN 300 417-3-2 V1.1.4 (1999-05)European Standard (Telecommunications series)Transmission and Multiplexing (TM);Generic requirements of transport functionality of equipment;Part 3-2: Synchronous Transport Module-N (STM-N)regenerator and multiplex section layer functions;Implementation Conformance Statement (ICS)proforma specificationSIST EN 300 417-3-2 V1.1.4:2003



ETSIEN 300 417-3-2 V1.1.4 (1999-05)2ReferenceREN/TM-01015-3-2b (3v0riieo.PDF)KeywordsICS, STM, SDH, transmission, testingETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail] copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: [e-mail] NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 300 417-3-2 V1.1.4:2003



ETSIEN 300 417-3-2 V1.1.4 (1999-05)3ContentsIntellectual Property Rights.9Foreword.9Introduction.101Scope.112References.113Definitions and abbreviations.123.1Definitions.123.2Abbreviations.124Conformance to this ICS proforma specification.15Annex A (normative):ICS proforma for EN 300 417-3-1.16A.1Guidance for completing the ICS proforma.16A.1.1Purposes and structure.16A.1.2Abbreviations and conventions.16A.1.3Instructions for completing the ICS proforma.18Annex B (normative):ICS proforma for STM-1 regenerator section layer.19B.1Identification of the implementation.19B.1.1Date of the statement.19B.1.2Implementation Under Test (IUT) identification.19B.1.3System Under Test (SUT) identification.20B.1.4Product supplier.20B.1.5Client.21B.1.6ICS contact person.21B.2Identification of the EN.22B.3Global statement of conformance of STM-1 Regenerator Section (RS1) layer.22B.4RS1 Layer function.23B.4.1RS1 layer description.23B.4.2RS1 layer transmission tables.24B.4.2.1RS1 connection function: RS1_C.24B.4.2.2STM-1 regenerator section layer trail termination functions: RS1_TT_So and RS1_TT_Sk.24B.4.2.2.1Frame alignment signal.24B.4.2.2.2FAS generation.24B.4.2.2.3Signal scrambling / descrambling.25B.4.2.2.4In service error monitoring process.26B.4.2.2.5Trail Trace Identifier (TTI).27B.4.2.3RS1 layer to MS1 Layer adaptation functions: RS1/MS1_A_So and RS1/MS1_A_Sk.29B.4.2.3.1RS1 layer to STM-1 Multiplex Section (MS1) layer multiplexing and demultiplexing processes.29B.4.2.4RS1 layer to DCC Layer adaptation functions: RS1/DCC_A_So and RS1/DCC_A_Sk.29B.4.2.4.1RS1 layer to DCC layer multiplexing and demultiplexing processes.29B.4.2.5RS1 layer to P0s layer adaptation functions: RS1/P0s_A_So-N and RS1/P0s_A_Sk-N.30B.4.2.5.1RS1 layer to P0s layer multiplexing and demultiplexing processes.30B.4.2.5.2RS1 layer to P0s layer frequency justification and bitrate adaptation processes.30B.4.2.6RS1 layer to V0x layer adaptation functions: RS1/V0x_A_So and RS1/V0x_A_Sk.31B.4.2.6.1RS1 layer to V0x layer multiplexing and demultiplexing processes.31B.4.3Defect, fault and performance monitoring.32B.4.3.1Trail termination point mode management.32B.4.3.2Defect detection and clearance criteria.32B.4.3.3Consequent action activation and clearance criteria.33SIST EN 300 417-3-2 V1.1.4:2003



ETSIEN 300 417-3-2 V1.1.4 (1999-05)4B.4.3.4Defect correlation.34Annex C (normative):ICS proforma for STM-1 multiplex section layer.35C.1Identification of the implementation.35C.1.1Date of the statement.35C.1.2Implementation Under Test (IUT) identification.35C.1.3System Under Test (SUT) identification.35C.1.4Product supplier.36C.1.5Client.36C.1.6ICS contact person.37C.2Identification of the EN.37C.3Global statement of conformance of MS1 layer.37C.4MS1 section layer function.38C.4.1MS1 layer description.38C.4.2MS1 layer transmission tables.40C.4.2.1MS1 connection function: MS1_C.40C.4.2.2MS1 layer trail termination functions: MS1_TT_So and MS1_TT_Sk.41C.4.2.2.1In service error monitoring process.41C.4.2.2.2Server layer status monitoring process.42C.4.2.2.2.1MS1 Alarm Indication Signal (MS1 AIS).42C.4.2.2.3Remote indicators monitoring process.42C.4.2.2.3.1MS1 Remote Defect Indication (MS1 RDI).42C.4.2.2.3.2MS1 Remote Error Indication (REI) (MS1 REI).43C.4.2.3MS1 layer to S4 layer adaptation functions: MS1/S4_A_So and MS1/S4_A_Sk.44C.4.2.3.1MS1 layer to S4 Layer frequency justification and bitrate adaptation processes.44C.4.2.3.2MS1 layer to S4 layer alignment process.45C.4.2.3.2.1AU-4 pointer generation.47C.4.2.3.2.2AU-4 pointer interpretation.50C.4.2.3.3MS1 layer to S4 layer multiplexing and demultiplexing processes.55C.4.2.4MS1 layer to DCC layer adaptation functions: MS1/DCC_A_So and MS1/DCC_A_Sk.55C.4.2.4.1MS1 layer to DCC layer multiplexing and demultiplexing processes.55C.4.2.5MS1 layer to P0s layer adaptation functions: MS1/P0s_A_So and MS1/P0s_A_Sk.56C.4.2.5.1MS1 layer to P0s layer frequency justification and bitrate adaptation processes.56C.4.2.5.2MS1 layer to P0s layer multiplexing and demultiplexing processes.56C.4.3MS1 linear trail protection transmission tables.57C.4.3.1MS1 linear trail protection connection functions: MS1P1+1_C and MS1P1:n_C.59C.4.3.2MS1 linear protection trail termination functions: MS1P_TT_So and MS1P_TT_Sk.60C.4.3.3MS1 linear trail protection adaptation functions: MS1/MS1P_A_So and MS1/MS1P_A_Sk.61C.4.3.3.1MS1 layer to MS1 protection layer multiplexing and demultiplexing processes.61C.4.3.4MS1 linear trail protection processes.61C.4.3.4.1Automatic Protection Switching (APS) externally initiated commands.61C.4.3.4.2Automatic Protection Switching (APS) automatically initiated commands.63C.4.3.4.3Automatic Protection Switching (APS) generalities.64C.4.3.4.4Automatic Protection Switching (APS) switch performance.65C.4.3.4.5Automatic Protection Switching (APS) subprocesses.65C.4.3.4.6Automatic Protection Switching (APS) signal generation.67C.4.3.4.7Automatic Protection Switching (APS) signal interpretation.68C.4.3.4.8Automatic Protection Switching (APS) status report.69C.4.4MS1 layer defect, fault and performance monitoring tables.69C.4.4.1Port status management.69C.4.4.2Defect detection and clearance criteria.70C.4.4.3Consequent action activation and clearance criteria.72C.4.4.4Defect correlation.74C.4.4.5Performance monitoring.75C.4.4.5.1Near end performance monitoring.75C.4.4.5.2Far end performance monitoring.75C.4.4.5.3Pointer performance monitoring.76C.4.5MS1 protection layer defect, fault and performance monitoring tables.76SIST EN 300 417-3-2 V1.1.4:2003



ETSIEN 300 417-3-2 V1.1.4 (1999-05)5C.4.5.1Defect detection and clearance criteria.76C.4.5.2Consequent action activation and clearance criteria.78C.4.5.3Defect correlation.79C.4.5.4Performance monitoring.80Annex D (normative):ICS proforma for STM-4 regenerator section layer.81D.1Identification of the implementation.81D.1.1Date of the statement.81D.1.2Implementation Under Test (IUT) identification.81D.1.3System Under Test (SUT) identification.81D.1.4Product supplier.82D.1.5Client.82D.1.6ICS contact person.83D.2Identification of the EN.83D.3Global statement of conformance of RS-4 regenerator section (RS4).83D.4RS4 section layer function.84D.4.1STM-4 regenerator section layer description.84D.4.2RS-4 regenerator section Layer Transmission Tables.85D.4.2.1RS-4 regenerator section connection function: RS4_C.85D.4.2.2RS-4 regenerator section layer trail termination functions: RS4_TT_So and RS4_TT_Sk.85D.4.2.2.1FAS.85D.4.2.2.2FAS generation.85D.4.2.2.3Signal scrambling / descrambling.86D.4.2.2.4In service error monitoring process.87D.4.2.2.5Trail Trace Identifier (TTI).88D.4.2.3STM-4 regenerator section layer to MS4 layer adaptation functions: RS4/MS4_A_So andRS4/MS4_A_Sk.90D.4.2.3.1RS4 layer to MS4 layer multiplexing and demultiplexing processes.90D.4.2.4STM-4 regenerator section layer to DCC layer adaptation functions: RS4/DCC_A_So andRS4/DCC_A_Sk.90D.4.2.4.1RS4 layer to DCC layer multiplexing and demultiplexing processes.90D.4.2.5STM-4 regenerator section layer to P0s layer adaptation functions: RS4/P0s_A_So-N andRS4/P0s_A_Sk-N.91D.4.2.5.1RS4 layer to P0s layer multiplexing and demultiplexing processes.91D.4.2.5.2RS4 layer to P0s layer frequency justification and bitrate adaptation processes.91D.4.2.6STM-4 regenerator section layer to V0x layer adaptation functions: RS4/V0x_A_So andRS4/V0x_A_Sk.92D.4.2.6.1RS4 layer to V0x layer multiplexing and demultiplexing processes.92D.4.3Defect, fault and performance monitoring.93D.4.3.1Trail termination point mode management.93D.4.3.2Defect detection and clearance criteria.93D.4.3.3Consequent action activation and clearance criteria.94D.4.3.4Defect correlation.95Annex E (normative):ICS proforma for STM-4 multiplex section layer.96E.1Identification of the implementation.96E.1.1Date of the statement.96E.1.2Implementation Under Test (IUT) identification.96E.1.3System Under Test (SUT) identification.96E.1.4Product supplier.97E.1.5Client.97E.1.6ICS contact person.98E.2Identification of the EN.98E.3Global statement of conformance of STM-4 Multiplex Section (MS4) layer.98E.4MS4 layer function.99E.4.1MS4 layer Description.99SIST EN 300 417-3-2 V1.1.4:2003



ETSIEN 300 417-3-2 V1.1.4 (1999-05)6E.4.2MS4 layer transmission tables.101E.4.2.1MS4 connection function: MS4_C.102E.4.2.2MS4 layer trail termination functions: MS4_TT_So and MS4_TT_Sk.102E.4.2.2.1In service error monitoring process.102E.4.2.2.2Server layer status monitoring process.103E.4.2.2.2.1MS4 Alarm Indication Signal (MS4 AIS).103E.4.2.2.3Remote indicators monitoring process.103E.4.2.2.3.1MS4 Remote Defect Indication (RDI) (MS4 RDI).103E.4.2.2.3.2MS4 Remote Error Indication (REI) (MS4 REI).104E.4.2.3MS4 layer to S4 layer adaptation functions: MS4/S4_A_So and MS4/S4_A_Sk.105E.4.2.3.1MS4 layer to S4 layer frequency justification and bitrate adaptation processes.106E.4.2.3.2MS4 layer to S4 layer alignment process.106E.4.2.3.2.1AU pointer generation.108E.4.2.3.2.2AU pointer interpretation.111E.4.2.3.3MS4 layer to S4 layer multiplexing and demultiplexing processes.116E.4.2.4MS4 layer to S4-4c layer adaptation functions: MS4/S4-4c_A_So and MS4/S4-4c_A_Sk.116E.4.2.4.1MS4 layer to S4-4c layer frequency justification and bitrate adaptation processes.117E.4.2.4.2MS4 layer to S4-4c layer alignment process.117E.4.2.4.2.1Concatenation indicator recovery process.119E.4.2.4.3MS4 layer to S4-4c layer multiplexing and demultiplexing processes.121E.4.2.5MS4 layer to DCC Layer adaptation functions: MS4/DCC_A_So and MS4/DCC_A_Sk.121E.4.2.5.1MS4 layer to DCC layer multiplexing and demultiplexing processes.121E.4.2.6MS4 layer to P0s layer adaptation functions: MS4/P0s_A_So and MS4/P0s_A_Sk.122E.4.2.6.1MS4 layer to P0s layer frequency justification and bitrate adaptation processes.122E.4.2.6.2MS4 layer to P0s layer multiplexing and demultiplexing processes.122E.4.3MS4 Linear Trail Protection Transmission Tables.123E.4.3.1MS4 Linear Trail Protection Connection Functions: MS4P1+1_C and MS4P1:n_C.125E.4.3.2MS4 Linear Protection Trail Termination Functions: MS4P_TT_So and MS4P_TT_Sk.126E.4.3.3MS4 Linear Trail Protection Adaptation Functions: MS4/MS4P_A_So and MS4/MS4P_A_Sk.127E.4.3.3.1MS4 layer to MS4 Protection layer multiplexing and demultiplexing processes.127E.4.3.4MS4 Linear Trail Protection processes.127E.4.3.4.1Automatic Protection Switching (APS) externally initiated commands.127E.4.3.4.2Automatic Protection Switching (APS) automatically initiated commands.129E.4.3.4.3Automatic Protection Switching (APS) generalities.130E.4.3.4.4Automatic Protection Switching (APS) switch performance.131E.4.3.4.5Automatic Protection Switching (APS) subprocesses.131E.4.3.4.6Automatic Protection Switching (APS) signal generation.133E.4.3.4.7Automatic Protection Switching (APS) signal interpretation.134E.4.3.4.8Automatic Protection Switching (APS) status report.135E.4.4MS4 layer defect, fault and performance monitoring tables.135E.4.4.1Port status management.135E.4.4.2Defect detection and clearance
...