ETSI EN 300 019-1-0 V2.1.2 (2003-09)

Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-0: Classification of environmental conditions; Introduction

REN/EE-01027-1-0

Okoljski inženiring (EE) – Okoljski pogoji in preskusi vplivov okolja za telekomunikacijsko opremo – 1-0. del: Klasifikacija okoljskih pogojev – Uvod

General Information

• Status: Published
• Publication Date: 10-Sep-2003
• Technical Committee: EE 1 - EE Environmental Conditions
• Current Stage: 12 - Completion
• Due Date: 12-Sep-2003
• Completion Date: 11-Sep-2003
• Ref Project: SIST EN 300 019-1-0 V2.1.2:2006 - Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-0: Classification of environmental conditions; Introduction

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 019-1-0 V2.1.2:2006
01-februar-2006
Okoljski inženiring (EE) – Okoljski pogoji in preskusi vplivov okolja za
telekomunikacijsko opremo – 1-0. del: Klasifikacija okoljskih pogojev – Uvod
Environmental Engineering (EE); Environmental conditions and environmental tests for
telecommunications equipment; Part 1-0: Classification of environmental conditions;
Introduction
Ta slovenski standard je istoveten z: EN 300 019-1-0 Version 2.1.2
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
SIST EN 300 019-1-0 V2.1.2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 019-1-0 V2.1.2:2006

---------------------- Page: 2 ----------------------

SIST EN 300 019-1-0 V2.1.2:2006

ETSI EN 300 019-1-0 V2.1.2 (2003-09)
European Standard (Telecommunications series)


Environmental Engineering (EE);
Environmental conditions and environmental tests
for telecommunications equipment;
Part 1-0: Classification of environmental conditions;
Introduction

---------------------- Page: 3 ----------------------

SIST EN 300 019-1-0 V2.1.2:2006
 2 ETSI EN 300 019-1-0 V2.1.2 (2003-09)



Reference
REN/EE-01027-1-0
Keywords
environment, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2003.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 019-1-0 V2.1.2:2006
 3 ETSI EN 300 019-1-0 V2.1.2 (2003-09)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.5
2 References.5
3 Definitions.5
4 Environmental classes.6
4.1 Purpose of classification.6
4.2 Environmental classes covered in Part 1 .7
5 Explanation of climatograms.8
6 Environmental contents of equipment documentation .8
6.1 Environmental considerations to be included in the design process for producing equipment .8
6.2 Environmental contents of a product specification .9
6.3 Contents of an environmental test programme.9
History .10

ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 019-1-0 V2.1.2:2006
 4 ETSI EN 300 019-1-0 V2.1.2 (2003-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Environmental
Engineering (EE).
The present document is part 1, sub-part 0 of a multi-part deliverable covering the classification of environmental
conditions and environmental tests for telecommunications equipment, as identified below:
Part 1: "Classification of environmental conditions";
Sub-part 0: "Introduction";
Sub-part 1: "Storage";
Sub-part 2: "Transportation";
Sub-part 3: "Stationary use at weatherprotected locations";
Sub-part 4: "Stationary use at non-weatherprotected locations";
Sub-part 5: "Ground vehicle installations";
Sub-part 6: "Ship environments";
Sub-part 7: "Portable and non-stationary use";
Sub-part 8: "Stationary use at underground locations";
Part 2: "Specification of environmental tests".
Part 1 specifies different standardized environmental classes covering climatic and biological conditions, chemically
and mechanically active substances and mechanical conditions during storage, transportation and in use.
Part 2 specifies the recommended test severities and test methods for the different environmental classes.

National transposition dates
Date of adoption of this EN: 5 September 2003
Date of latest announcement of this EN (doa): 31 December 2003
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 June 2004
Date of withdrawal of any conflicting National Standard (dow): 30 June 2004

ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 019-1-0 V2.1.2:2006
 5 ETSI EN 300 019-1-0 V2.1.2 (2003-09)
1 Scope
The purpose of the present document is to select class(es) of environmental conditions and their severities to which
equipment may be exposed. Only severe conditions, which may be harmful to the equipment, are included. The
severities specified are those which will have a low probability of being exceeded; generally less than 1 %.
The purpose of the present document is to form a general overview of Part 1.
TR 100 035 [1] should be used in conjunction with all parts of EN 300 019 series. It gives an introduction to the main
concepts of environmental engineering, the purpose and use of environmental classes and the corresponding test
philosophy.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] ETSI TR 100 035: "Environmental Engineering (EE); Environmental engineering; Guidance and
terminology".
[2] ETSI EN 300 019-1 (all subparts): "Environmental Engineering (EE); Environmental conditions
and environmental tests for telecommunications equipment; Classification of environmental
conditions".
[3] ETSI EN 300 019-2 (all subparts): "Environmental Engineering (EE); Environmental conditions
and environmental tests for telecommunications equipment; Specification of environmental tests".
3 Definitions
For the purposes of the present document, the following terms and definitions apply:
environmental class: systematic representation of the environment for a family of locations with "similar properties"
NOTE: This means that the detailed description of the class may be envisaged as an envelope around a group of
related environmental conditions. The class itself may not be considered directly as a typical example.
A class is composed of the most significant single factors, termed environmental parameters, selected
from those factors which are assumed to influence equipment performance.
Full descriptions of each class are included in the app
...