ETSI TR 102 216 V5.0.0 (2019-11)

Smart Cards; Vocabulary for Smart Card Platform specifications

RTR/SCP-000014

General Information

• Status: Published
• Publication Date: 17-Nov-2019
• Technical Committee: SET - Secure Element Technologies
• Current Stage: 12 - Completion
• Due Date: 20-Nov-2019
• Completion Date: 18-Nov-2019

Standards Content (Sample)

ETSI TR 102 216 V5.0.0 (2019-11)






TECHNICAL REPORT
Smart Cards;
Vocabulary for Smart Card Platform specifications

---------------------- Page: 1 ----------------------
2 ETSI TR 102 216 V5.0.0 (2019-11)



Reference
RTR/SCP-000014
Keywords
smart card
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2019.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TR 102 216 V5.0.0 (2019-11)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols, equations and abbreviations. 7
3.1 Terms . 7
3.1.0 Introduction. 7
3.1.1 0-9 . 7
3.1.2 A . 7
3.1.3 B . 8
3.1.4 C . 8
3.1.5 D . 9
3.1.6 E . 9
3.1.7 F . 9
3.1.8 G . 9
3.1.9 H . 10
3.1.10 I . 10
3.1.11 J . 10
3.1.12 K . 10
3.1.13 L . 10
3.1.14 M . 10
3.1.15 N . 10
3.1.16 O . 10
3.1.17 P . 10
3.1.18 Q . 11
3.1.19 R . 11
3.1.20 S . 11
3.1.21 T . 11
3.1.22 U . 12
3.1.23 V . 12
3.1.24 W . 12
3.1.25 X . 12
3.1.26 Y . 12
3.1.27 Z . 12
3.2 Symbols and equations . 12
3.3 Abbreviations . 13
3.3.0 Introduction. 13
3.3.1 0-9 . 13
3.3.2 A . 13
3.3.3 B . 13
3.3.4 C . 13
3.3.5 D . 14
3.3.6 E . 14
3.3.7 F . 14
3.3.8 G . 14
3.3.9 H . 14
3.3.10 I . 14
3.3.11 J . 15
3.3.12 K . 15
3.3.13 L . 15
3.3.14 M . 15
3.3.15 N . 15
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TR 102 216 V5.0.0 (2019-11)
3.3.16 O . 15
3.3.17 P . 15
3.3.18 Q . 16
3.3.19 R . 16
3.3.20 S . 16
3.3.21 T . 16
3.3.22 U . 16
3.3.23 V . 16
3.3.24 W . 16
3.3.25 X . 17
3.3.26 Y . 17
3.3.27 Z . 17
Annex A: Change history . 18
History . 19

ETSI

---------------------- Page: 4 ----------------------
5 ETSI TR 102 216 V5.0.0 (2019-11)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Report (TR) has been produced by ETSI Technical Committee Smart Card Platform (SCP).
The contents of the present document are subject to continuing work within EP SCP and may change following formal
EP SCP approval. If EP SCP decide to modify the contents of the present document, it will be re-released by EP SPC
with an identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to EP SCP for information;
2 presented to EP SCP for approval;
3 or greater indicates EP SCP approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
Modal verbs terminology
In the present document "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be
interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TR 102 216 V5.0.0 (2019-11)
1 Scope
The purpose of the present document is to identify specialist technical terms used within the Smart Card Platform (SCP)
project for the purposes of writing technical documents. The motivations for this are:
• to ensure that editors use terminology that is consistent across specifications;
• to provide a reader with convenient reference for technical terms that are used across multiple documents;
• to prevent inconsistent use of terminology across documents.
The present document is a collection of terms, definitions, abbreviations and acronyms related to the baseline
documents defining SCP objectives and systems framework. The present document provides a tool for further work on
SCP technical documentation and facilitates their understanding.
The terms, definitions and abbreviations as given in the present document are either imported from existing
documentation (SCP, 3GPP, ETSI, ISO/IEC or elsewhere) or newly created by smart card experts whenever the need
for precise vocabulary was identified.
The following types of terms and acronyms are not included in the present document:
• terms and acronyms generally used in computer science, information technology and cryptography;
• terms and acronyms from specific application domains such as mobile telephony and banking;
• terms and acronyms defined and used solely within a specific SCP specification to facilitate readability.
But such terms and acronyms may be included if they are frequently used in the SCP specifications and a common,
precise definition of the term or acronym would aid the interpretation and implementation of the specifications.
2 References
2.1 Normative references
Normative references are not applicable in the present document.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
• In the case of a reference to a TC SCP document, a non specific reference implicitly refers to the latest version
of that document in the same Release as the present document.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Void.
[i.2] ETSI TS 102 221: "Smart Cards; UICC-Terminal interface; Physical and logical characteristics".
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TR 102 216 V5.0.0 (2019-11)
3 Definition of terms, symbols, equations and
abbreviations
3.1 Terms
3.1.0 Introduction
The purpose of the present document is to provide the terms to be used in ETSI SCP deliverables.
3.1.1 0-9
1,8 V technology Smart Card: smart card containing an integrated circuit designed to operate with supply voltages of
1,8 V ± 10 % and 3 V ± 10 %
3 V technology Smart Card: smart card containing an integrated circuit designed to operate with supply volt
...