ETSI EN 301 815-4 V1.1.1 (2002-10)

Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user

DEN/SPAN-130251-4

Širokopasovno digitalno omrežje z integriranimi storitvami (B-ISDN) – Protokol digitalne naročniške signalizacije št. 2 (DSS2) – Razred kakovosti storitve in indikacija parametrov pri vzpostavljanju klica/zveze – 4. del: Abstraktni preskušalni niz (ATS) in delna dodatna informacija za preskušanje izvedbe protokola (PIXIT) – Proforma specifikacija za uporabnika

General Information

• Status: Published
• Publication Date: 14-Oct-2002
• Technical Committee: SPAN 13 - SPAN Peer-to-Peer Control Protocol (PTPCP)
• Current Stage: 12 - Completion
• Due Date: 18-Oct-2002
• Completion Date: 15-Oct-2002
• Ref Project: SIST EN 301 815-4 V1.1.1:2005 - Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VWUDNWQLBroadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 815-4 Version 1.1.1SIST EN 301 815-4 V1.1.1:2005en01-januar-2005SIST EN 301 815-4 V1.1.1:2005SLOVENSKI
STANDARD



SIST EN 301 815-4 V1.1.1:2005



ETSI EN 301 815-4 V1.1.1 (2002-10)European Standard (Telecommunications series) Broadband Integrated Services Digital Network (B-ISDN);Digital Subscriber Signalling System No. two (DSS2) protocol;Quality of Service class and parameters indicationat call/connection establishment;Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT)proforma specification for the user
SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 2
Reference DEN/SPAN-130251-4 Keywords ATS, B-ISDN, DSS2, PIXIT, quality, user ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [e-mail] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2002. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 3
Contents Intellectual Property Rights.5 Foreword.5 1 Scope.6 2 References.6 3 Definitions and abbreviations.7 3.1 Definitions.7 3.1.1 Definitions related to conformance testing.7 3.1.2 Definitions related to EN 301 815-1.7 3.2 Abbreviations.8 4 Abstract Test Method (ATM).8 5 Untestable test purposes.8 6 ATS to TP map.8 7 PCTR conformance.9 8 PIXIT conformance.9 9 ATS Conformance.9 Annex A (normative): Protocol Conformance Test Report (PCTR) proforma.10 A.1 Identification summary.10 A.1.1 Protocol conformance test report.10 A.1.2 IUT identification.10 A.1.3 Testing environment.10 A.1.4 Limits and reservations.11 A.1.5 Comments.11 A.2 IUT Conformance status.11 A.3 Static conformance summary.11 A.4 Dynamic conformance summary.11 A.5 Static conformance review report.12 A.6 Test campaign report.12 A.7 Observations.13 Annex B (normative): Partial PIXIT proforma.14 B.1 Identification summary.14 B.2 Abstract test suite summary.14 B.3 Test laboratory.14 B.4 Client (of the Test Laboratory).15 B.5 SUT.15 B.6 Protocol information.16 B.6.1 Protocol identification.16 B.6.2 Configuration to be tested.16 B.6.3 Test management timers.16 B.6.4 Parameter Values.17 Annex C (normative): Abstract Test Suite (ATS).18 SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 4
C.1 The TTCN Graphical form (TTCN.GR).18 C.2 The TTCN Machine Processable form (TTCN.MP).18 Annex D (informative): Bibliography.19 History.20
SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 5
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). The present document is part 4 of a multi-part deliverable covering the Digital Subscriber Signalling System No. two (DSS2) protocol specification for the Broadband Integrated Services Digital Network (B-ISDN) to support Quality of Service class and parameters indication at call/connection establishment, as identified below: Part 1: "Protocol specification [ITU-T Recommendations Q.2965.1 (1999) and Q.2965.2 (1999), modified]"; Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification [ITU-T Recommendations Q.2965.1B (2000) and Q.2965.2B (2000), modified]"; Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user"; Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user"; Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network"; Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network".
National transposition dates Date of adoption of this EN: 11 October 2002 Date of latest announcement of this EN (doa): 31 January 2003 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 July 2003 Date of withdrawal of any conflicting National Standard (dow): 31 July 2003
SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 6
1 Scope The present document specifies the user Abstract Test Suite (ATS) for the TB reference point or coincident SB and TB reference point (as defined in ITU-T Recommendation I.413 [6]) of implementations conforming to the standards for the Broadband Integrated Services Digital Network (B-ISDN) Digital Subscriber Signalling System No. two (DSS2) protocol specification for support of Quality of Service Class and parameters indication at call/connection establishment defined in EN 301 815-1 [1]. A further part of the present document specifies the Test Suite Structure and Test Purposes (TSS&TP) related to this ATS and partial PIXIT proforma. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for the Network side of the TB reference point or coincident SB and TB reference point of implementations conforming to EN 301 815-1 [1]. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. [1] ETSI EN 301 815-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service Class and parameters indication at call/connection establishment; Part 1: Protocol specification [ITU-T Recommendations Q.2965.1 (1999) and Q.2965.2 (1999), modified]". [2] ETSI EN 301 815-2: "Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification [ITU-T Recommendations Q.2965.1B (2000) and Q.2965.2B (2000), modified]". [3] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts". [4] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification". [5] ISO/IEC 9646-3: "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)". [6] ITU-T Recommendation I.413 (1993): "B-ISDN user-network interface". [7] ETSI EN 300 443-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 1: Protocol specification [ITU-T Recommendation Q.2931 (1995), modified]". [8] ISO/IEC 9646-4: "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 4: Test realization". [9] ISO/IEC 9646-5: "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 5: Requirements on test laboratories and clients for the conformance assessment process". SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 7
[10] ETSI EN 300 443-2: "Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Parts 2: Protocol Implementation Conformance Statement (PICS) proforma specification". 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in EN 301 815-1 [1], EN 300 443-1 [7] and the following apply. 3.1.1 Definitions related to conformance testing Abstract test case: Refer to ISO/IEC 9646-1 [3]. Abstract Test Method (ATM): Refer to ISO/IEC 9646-1 [3]. Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 [3]. Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [3]. System Under Test (SUT): Refer to ISO/IEC 9646-1 [3]. Upper Tester (UT): Refer to ISO/IEC 9646-1 [3]. Lower Tester (LT): Refer to ISO/IEC 9646-1 [3]. Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 [3]. PICS proforma: Refer to ISO/IEC 9646-1 [3]. Protocol Implementation eXtra Information for Testing (PIXIT): Refer to ISO/IEC 9646-1 [3]. PIXIT proforma: Refer to ISO/IEC 9646-1 [3]. Test Purpose (TP): Refer to ISO/IEC 9646-1 [3]. Point of Control and Observation (PCO): Refer to ISO/IEC 9646-1 [3]. 3.1.2 Definitions related to EN 301 815-1 user: DSS2 protocol entity at the User side of the user-network interface where a TB reference point or coincident SB and TB reference point applies user (SB/TB): DSS2 protocol entity at the User side of the user-network interface where a coincident SB and TB reference point applies user (TB): DSS2 protocol entity at the User side of the user-network interface where a TB reference point applies (user is a private ISDN) SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 8
3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ATM Abstract Test Method ATS Abstract Test Suite B-ISDN Broadband Integrated Services Digital Network
DSS2 Digital Subscriber Signalling System No. two IUT Implementation Under Test LT Lower Tester
MOT Means Of Testing PCO Point of Control and Observation PICS Protocol Implementation Conformance Statement PIXIT Protocol Implementation eXtra Information for Testing SUT System Under Test TP Test Purpose TSS Test Suite Structure TTCN Tree and Tabular Combined Notation UT Upper Tester VCI Virtual Channel Identifier VPCI Virtual Path Connection Identifier 4 Abstract Test Method (ATM) The remote test method is applied for the user ATS. The Point of Control and Observation (PCO) resides at the service access point between layers 2 and 3. This PCO is named "L0" (for Lower). The L0 PCO is used to control and observe the behaviour of the Implementation Under Test (IUT) and test case verdicts are assigned depending on the behaviour observed at this PCO. Tester
SUT LT
IUT
PCO
Layer 2
Layer 2 Layer 1
Layer 1 Service provider
Figure 1: Remote test method ISO/IEC 9646-2 [4] allows the informal expression of Test Co-ordination Procedures (TCP) between the System Under Test (SUT) upper layer(s) and the Lower Tester (LT). In the ATS contained in annex C, TCP is achieved by use of a second "informal" PCO, called "O" (for Operator). This PCO is used to specify control but not observation above the IUT and consequently, events at this PCO are never used to generate test case verdicts. The use of this O PCO is regarded as a preferred alternative to the use of the implicit send event, in that it allows the ATS to specify in a clear and meaningful way what actions are required to be performed on the IUT. 5 Untestable test purposes There are no untestable test purposes associated with this ATS. 6 ATS to TP map The identifiers used for the TPs are reused as test case names. Thus there is a straightforward one-to-one mapping. SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 9
7 PCTR conformance A test laboratory, when requested by a client to produce a PCTR, is required, as specified in ISO/IEC 9646-5 [9], to produce a PCTR conformant with the PCTR template given in annex B of ISO/IEC 9646-5 [9]. Furthermore, a test laboratory, offering testing for the ATS specification contained in annex C, when requested by a client to produce a PCTR, is required to produce a PCTR conformant with the PCTR proforma contained in annex A of the present document. A PCTR which conforms to this PCTR proforma specification shall preserve the content and ordering of the clauses contained in annex A. Clause A.6 of the PCTR may contain additional columns. If included, these shall be placed to the right of the existing columns. Text in italics may be retained by the test laboratory. 8 PIXIT conformance A test realizer, producing an executable test suite for the Abstract Test Suite (ATS) specification contained in annex C, is required, as specified in ISO/IEC 9646-4 [8], to produce an augmented partial PIXIT proforma conformant with this partial PIXIT proforma specification. An augmented partial PIXIT proforma which conforms to this partial PIXIT proforma specification shall, as a minimum, have contents which are technically equivalent to annex B. The augmented partial PIXIT proforma may contain additional questions that need to be answered in order to prepare the Means Of Testing (MOT) for a particular Implementation Under Test (IUT). A test laboratory, offering testing for the ATS specification contained in annex C, is required, as specified in ISO/IEC 9646-5 [9], to further augment the augmented partial PIXIT proforma to produce a PIXIT proforma conformant with this partial PIXIT proforma specification. A PIXIT proforma which conforms to this partial PIXIT proforma specification shall, as a minimum, have contents which are technically equivalent to annex B. The PIXIT proforma may contain additional questions that need to be answered in order to prepare the test laboratory for a particular IUT. 9 ATS Conformance The test realizer, producing a Means Of Testing (MOT) and Executable Test Suite (ExTS) for this Abstract Test Suite (ATS) specification, shall comply with the requirements of ISO/IEC 9646-4 [8]. In particular, these concern the realization of an Executable Test Suite (ExTS) based on each ATS. The test realizer shall provide a statement of conformance of the MOT to this ATS specification. An ExTS which conforms to this ATS specification shall contain test groups and test cases which are technically equivalent to those contained in the ATS in annex C. All sequences of test events comprising an abstract test case shall be capable of being realized in the executable test case. Any further checking which the test system might be capable of performing is outside the scope of this ATS specification and shall not contribute to the verdict assignment for each test case. Test laboratories running conformance test services using this ATS shall comply with ISO/IEC 9646-5 [9]. A test laboratory which claims to conform to this ATS specification shall use an MOT which conforms to this ATS. SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 10 Annex A (normative): Protocol Conformance Test Report (PCTR) proforma Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PCTR proforma in this annex so that it can be used for its intended purposes and may further publish the completed PCTR. A.1 Identification summary A.1.1 Protocol conformance test report PCTR number:
PCTR Date:
Corresponding SCTR number:
Corresponding SCTR date:
Test Laboratory identification:
Test Laboratory Manager:
Signature:
A.1.2 IUT identification Name:
Version:
Protocol specification: EN 301 815-1 PICS:
Previous PCTRs (if any):
A.1.3 Testing environment PIXIT Reference number:
ATS Specification: EN 301 815-4
Abstract Test Method: Remote test method (see ISO/IEC 9646-2) Means of Testing identification:
Dates of testing:
Conformance Log reference(s):
Retention Date for Log reference(s):
SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 11 A.1.4 Limits and reservations Additional information relevant to the technical contents or further use of the test report, or to the rights and obligations of the test laboratory and the client, may be given here. Such information may include restriction on the publication of the report. . . . . . A.1.5 Comments Additional comments may be given by either the client or the test laboratory on any of the contents of the PCTR, for example, to note disagreement between the two parties. . . . . A.2 IUT Conformance status This IUT has or has not been shown by conformance assessment to be non-conforming to the specified protocol specification. Strike the appropriate words in this sentence. If the PICS for this IUT is consistent with the static conformance requirements (as specified in clause A.3 of the present document) and there are no "FAIL" verdicts to be recorded (in clause A.6) strike the words "has or", otherwise strike the words "or has not". A.3 Static conformance summary The PICS for this IUT is or is not consistent with the static conformance requirements in the specified protocol. Strike the appropriate words in this sentence. A.4 Dynamic conformance summary The test campaign did or did not reveal errors in the IUT. Strike the appropriate words in this sentence. If there are no "FAIL" verdicts to be recorded (in clause A.6 of the present document) strike the words "did or", otherwise strike the words "or did not". Summary of the results of groups of tests:
......................................................................................................................................................................................... ......................................................................................................................................................................................... ......................................................................................................................................................................................... SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 12 A.5 Static conformance review report If clause A.3 indicates non-conformance, this clause itemizes the mismatches between the PICS and the static conformance requirements of the specified protocol specification. . . . . . . A.6 Test campaign report ATS Reference Selected?
(Y/N) Run?
(Y/N) Verdict Observations Signalling procedures at the coincident SB/TB and at the TB reference points QOSU_01_01
QOSU_01_02
QOSU_01_03
QOSU_01_04
QOSU_02_01
QOSU_02_02
QOSU_02_03
QOSU_02_04
QOSU_02_05
QOSU_02_06
QOSU_02_07
QOSU_02_08
QOSU_02_09
QOSU_02_10
QOSU_02_11
QOSU_02_12
QOSU_02_13
QOSU_02_14
QOSU_02_15
QOSU_02_16
QOSU_02_17
QOSU_02_18
QOSU_02_19
QOSU_02_20
QOSU_02_21
QOSU_02_22
QOSU_02_23
QOSU_03_01
QOSU_03_02
QOSU_03_03
QOSU_03_04
QOSU_03_05
QOSU_03_06
QOSU_03_07
QOSU_03_08
QOSU_03_09
SIST EN 301 815-4 V1.1.1:2005



ETSI ETSI EN 301 815-4 V1.1.1 (2002-10) 13 A.7 Observations Additional information relevant to the technical content of the PCTR are given here. . .
...