ETSI EN 300 058-4 V1.2.4 (1998-06)

Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user

REN/SPS-05145-F-4

Digitalno omrežje z integriranimi storitvami (ISDN) - Dopolnilna storitev: čakajoči klic (CW) - Protokol digitalne naročniške signalizacije št. 1 (DSS1) - 4. del: Abstraktni preskušalni niz (ATS) in dodatna informacija za preskušanje delne izvedbe protokola - Proforma specifikacija za uporabnika

General Information

• Status: Published
• Publication Date: 23-Jun-1998
• Technical Committee: SPS 5 3 - Conformance Testing
• Current Stage: 12 - Completion
• Due Date: 03-Jul-1998
• Completion Date: 24-Jun-1998
• Ref Project: SIST EN 300 058-4 V1.2.4:2005 - Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 058-4 V1.2.4:2005
01-julij-2005
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL,6'1'RSROQLOQDVWRULWHYþDNDMRþL
NOLF&:3URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMHãW'66GHO
$EVWUDNWQLSUHVNXãDOQLQL]$76LQGRGDWQDLQIRUPDFLMD]DSUHVNXãDQMHGHOQH
L]YHGEHSURWRNROD3URIRUPDVSHFLILNDFLMD]DXSRUDEQLND
Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service;
Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: Abstract Test
Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the user
Ta slovenski standard je istoveten z: EN 300 058-4 Version 1.2.4
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST EN 300 058-4 V1.2.4:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 058-4 V1.2.4:2005

---------------------- Page: 2 ----------------------

SIST EN 300 058-4 V1.2.4:2005
EN 300 058-4 V1.2.4 (1998-06)
European Standard (Telecommunications series)
Integrated Services Digital Network (ISDN);
Call Waiting (CW) supplementary service;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 4: Abstract Test Suite (ATS) and partial Protocol
Implementation eXtra Information for Testing (PIXIT)
proforma specification for the user


---------------------- Page: 3 ----------------------

SIST EN 300 058-4 V1.2.4:2005
2 EN 300 058-4 V1.2.4 (1998-06)
Reference
REN/SPS-05145-F-4 (0jd00iqo.PDF)
Keywords
ISDN, DSS1, supplementary service, CW,
testing, ATS, PIXIT, user
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.: [phone]  Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
[e-mail]
http://www.etsi.fr
http://www.etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 058-4 V1.2.4:2005
3 EN 300 058-4 V1.2.4 (1998-06)
Contents
Intellectual Property Rights.5
Foreword .5
1 Scope.6
2 Normative references .6
3 Definitions and abbreviations .7
3.1 Definitions . 7
3.2 Abbreviations. 7
4 Abstract Test Method (ATM) .8
5 Untestable test purposes.8
6 ATS conventions.8
6.1 Declarations part. 8
6.1.1 Type definitions . 8
6.1.1.1 Simple type definitions . 8
6.1.1.2 Structured type definitions. 9
6.1.1.2.1 TTCN structured type definitions . 9
6.1.1.2.2 ASN.1 structured type definitions. 9
6.1.1.3 ASP type definitions. 9
6.1.1.3.1 TTCN ASP type definitions. 9
6.1.1.3.2 ASN.1 ASP type definitions. 10
6.1.1.4 PDU type definitions . 10
6.1.1.4.1 TTCN PDU type definitions . 10
6.1.1.4.2 ASN.1 PDU type definitions. 10
6.1.2 Test suite constants. 10
6.1.3 Test suite parameters. 10
6.1.4 Variables . 10
6.1.4.1 Test suite variables . 10
6.1.4.2 Test case variables. 10
6.1.5 Test suite operation definitions . 10
6.1.6 Alias definitions . 10
6.2 Constraints part. 11
6.2.1 Structured type constraint declaration . 11
6.2.2 ASN.1 type constraint declaration. 11
6.2.3 ASP type constraint declaration . 11
6.2.3.1 ASN.1 ASP type constraint declaration. 11
6.2.3.2 TTCN ASP type constraint declaration . 11
6.2.4 PDU type constraint declaration. 11
6.2.4.1 ASN.1 PDU type constraint declaration . 11
6.2.4.2 TTCN PDU type constraint declaration. 11
6.2.5 Chaining of constraints. 11
6.2.5.1 Static chaining . 11
6.2.5.2 Dynamic chaining. 11
6.2.6 Derived constraints. 12
6.2.7 Parameterized constraints. 12
6.2.8 Value assignment . 12
6.2.8.1 Specific values. 12
6.2.8.2 Matching values. 12
6.3 Dynamic part. 12
6.3.1 Test cases . 12
6.3.2 Test steps. 12
6.3.3 Defaults . 12
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 058-4 V1.2.4:2005
4 EN 300 058-4 V1.2.4 (1998-06)
7 ATS to TP map .12
8 PCTR conformance.13
9 PIXIT conformance.13
10 ATS conformance .13
Annex A (normative): Protocol Conformance Test Report (PCTR) proforma.14
A.1 Identification summary .14
A.1.1 Protocol conformance test report. 14
A.1.2 IUT identification . 14
A.1.3 Testing environment . 14
A.1.4 Limits and reservations . 15
A.1.5 Comments . 15
A.2 IUT conformance status .15
A.3 Static conformance summary.15
A.4 Dynamic conformance summary.15
A.5 Static conformance review report .16
A.6 Test campaign report.16
A.7 Observations.16
Annex B (normative): Partial PIXIT proforma.17
B.1 Identification summary .17
B.2 Abstract test suite summary .17
B.3 Test laboratory .17
B.4 Client (of the test laboratory).18
B.5 System Under Test (SUT).18
B.6 Protocol information .19
B.6.1 Protocol identification. 19
B.6.2 IUT information. 19
B.6.2.1 Parameters. 19
B.6.2.2 Parameter values . 19
B.6.2.3 Timer values. 19
B.6.2.4 Sending of message by IUT . 19
Annex C (normative): Abstract Test Suite (ATS).20
C.1 The TTCN Graphical form (TTCN.GR).20
C.1.1 ATS for basic access. 20
C.1.2 ATS for primary rate access. 20
C.2 The TTCN Machine Processable form (TTCN.MP) .20
C.2.1 ATS for basic access. 20
C.2.2 ATS for primary rate access. 20
Annex D (informative): General structure of ATS .21
Annex E (informative): Changes with respect to the previous ETS 300 058-4 .22
History.23
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 058-4 V1.2.4:2005
5 EN 300 058-4 V1.2.4 (1998-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Signalling
Protocols and Switching (SPS).
The present document is part 4 of a multi-part standard covering the Digital Subscriber Signalling System No. one
(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) Call Waiting (CW) supplementary
service, as described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing
(PIXIT) proforma specification for the user";
Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network";
Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the network".
National transposition dates
Date of adoption of this EN: 19 June 1998
Date of latest announcement of this EN (doa): 30 September 1998
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 1999
Date of withdrawal of any conflicting National Standard (dow): 31 March 1999
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 058-4 V1.2.4:2005
6 EN 300 058-4 V1.2.4 (1998-06)
1 Scope
This fourth part of EN 300 058 specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra
Information for Testing (PIXIT) proforma for the User side of the T reference point or coincident S and T reference
point (as defined in ITU-T Recommendation I.411 [10]) of implementations conforming to the stage three standard for
the Call Waiting (CW) supplementary service for the pan-European Integrated Services Digital Network (ISDN) by
means of the Digital Subscriber Signalling System No. one (DSS1) protocol, EN 300 058-1 [2].
EN 300 058-3 [4] specifies the Test Suite Structure and Test Purposes (TSS&TP) related to this ATS and partial PIXIT
proforma specification. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for the Network side
of the T reference point or coincident S and T reference point of implementations conforming to EN 300 058-1 [2].
2 Normative references
References may be made to:
a) specific versions of publications (identified by date of publication, edition number, version number, etc.), in
which case, subsequent revisions to the referenced document do not apply; or
b) all versions up to and including the identified version (identified by "up to and including" before the version
identity); or
c) all versions subsequent to and including the identified version (identified by "onwards" following the version
identity); or
d) publications without mention of a specific version, in which case the latest version applies.
A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System
No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1:
Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[2] EN 300 058-1 (V1.2): "Integrated Services Digital Network (ISDN); Call Waiting (CW)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:
Protocol specification".
[3] EN 300 058-2 (V1.2): "Integrated Services Digital Network (ISDN); Call Waiting (CW)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2:
Protocol Implementation Conformance Statement (PICS) proforma specification".
[4] EN 300 058-3 (V1.2): "Integrated Services Digital Network (ISDN); Call Waiting (CW)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test
Suite Structure and Test Purposes (TSS&TP) specification for the user".
[5] ISO/IEC 9646-1: "Information technology - OSI Conformance Testing Methodology and
Framework; Part 1: General Concepts".
[6] ISO/IEC 9646-2: "Information technology - OSI Conformance Testing Methodology and
Framework; Part 2: Abstract Test Suite Specification".
[7] ISO/IEC 9646-3: "Information technology - OSI Conformance Testing Methodology and
Framework; Part 3: The Tree and Tabular Combined Notation".
[8] ISO/IEC 9646-4: "Information technology - OSI Conformance Testing Methodology and
Framework; Part 4: Test realization".
[9] ISO/IEC 9646-5: "Information technology - OSI Conformance Testing Methodology and
Framework; Part 5: Requirements on test laboratories and clients for the conformance assessment
process".
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 058-4 V1.2.4:2005
7 EN 300 058-4 V1.2.4 (1998-06)
[10] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces - Reference configurations".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following definitions apply:
Abstract Test Suite (ATS): See ISO/IEC 9646-1 [5].
Implementation Under Test (IUT): See ISO/IEC 9646-1 [5].
Lower Tester (LT): See ISO/IEC 9646-1 [5].
Point Of Control And Observation (PCO): See ISO/IEC 9646-1 [5].
Protocol Implementation Conformance Statement (PICS): See ISO/IEC 9646-1 [5].
PICS proforma: See ISO/IEC 9646-1 [5].
Protocol Implementation Extra Information For Testing (PIXIT): See ISO/IEC 9646-1 [5].
PIXIT proforma: See ISO/IEC 9646-1 [5].
System Under Test (SUT): See ISO/IEC 9646-1 [5].
Upper Tester (UT): See ISO/IEC 9646-1 [5].
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ASP Abstract Service Primitive
ATM Abstract Test Method
ATS Abstract Test Suite
BER Basic Encoding Rules
CW Call Waiting
ExTS Executable Test Suite
IUT Implementation Under Test
LT Lower Tester
MOT Means Of Testing
PCO Point of Control and Observation
PCTR Protocol Conformance Test Report
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
SUT System Under Test
TCP Test Co-ordination Procedures
TP Test Purpose
TTCN Tree and Tabular Combined Notation
UT Upper Tester
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 058-4 V1.2.4:2005
8 EN 300 058-4 V1.2.4 (1998-06)
4 Abstract Test Method (ATM)
The remote test method is applied for the CW user ATS. The Point of Control and Observation (PCO) resides at the
service access point between layers 2 and 3. This PCO is named "L" (for Lower). The L PCO is used to control and
observe the behaviour of the Implementation Under Test (IUT) and test case verdicts are assigned depending on the
behaviour observed at this PCO.
Tester SUT
LT IUT
PCO
Layer 2 Layer 2
Layer 1 Layer 1
Service provider
Figure 1: Remote test method
ISO/IEC 9646-2 [6] allows the informal expression of Test Co-ordination Procedures (TCP) between the System Under
Test (SUT) upper layer(s) and the Lower Tester (LT). In the ATS contained in annex C, TCP is achieved by use of a
second "informal" PCO, called "O" (for Operator). This PCO is used to specify control but not observation above the
IUT and consequently, events at this PCO are never used to generate test case verdicts. The use of this O PCO is
regarded as a preferred alternative to the use of the implicit send event, in that it allows the ATS to specify in a clear and
meaningful way what actions are required to be performed on the IUT.
5 Untestable test purposes
There are no untestable test purposes associated with this ATS.
6 ATS conventions
This clause is structured similarly to the structure of a TTCN ATS. However, the names of the subclauses are arranged
in a way more suitable to the present document.
6.1 Declarations part
6.1.1 Type definitions
6.1.1.1 Simple type definitions
Where appropriate, simple types have a length, a value list or a range restriction attached.
Simple types defined as being of some string type (e.g. BIT STRING, OCTET STRING), have a length restriction or a
value list attached.
Simple types, defined as being of INTEGER type, have a value list or a range restriction attached.
ETSI

---------------------- Page: 10 ----------------------

SIST EN 300 058-4 V1.2.4:2005
9 EN 300 058-4 V1.2.4 (1998-06)
6.1.1.2 Structured type definitions
6.1.1.2.1 TTCN structured type definitions
All structured type definitions are provided with a full name.
All elements in every structured type definition, defined as being of some string type (e.g. BIT STRING,
OCTET STRING), have a length restriction attached.
If an element in a structured type definition is defined as being of a referenced type, the (possible) restriction is defined
in that referenced type.
For information elements the identifier, which is unique for each element, has its type defined as a simple type where the
value list is restricted to the single value which is the identifier itself. This has the advantage that it allows a test system
derived from this ATS to easily identify information elements embedded in messages. An ATS where information
element identifiers are represented as unrestricted types can present difficulties for a derived test system in the case
where it needs to find one information element embedded in a number of others and the constraints for the other
elements have the any-or-omit value. In such a case the test system cannot easily find the beginning of each information
element.
6.1.1.2.2 ASN.1 structured type definitions
There are no ASN.1 structured type definitions in the ATS.
6.1.1.3 ASP type definitions
6.1.1.3.1 TTCN ASP type definitions
TTCN ASP type definitions only contain one PDU or no PDU at all. The relationship between an ASP type and a PDU
type is one-to-one. That is, there exists one ASP type definition for each PDU type definition (if that ASP type contains
a PDU).
All TTCN ASP type definitions are provided with a full identifier.
Some ASPs are not parameterized as shown in the example in table 1. Such ASPs are only used for requesting or
receiving service from the lower layer.
Table 1: TTCN ASP type definition DL_REL_IN
TTCN ASP Type Definition
ASP NAME : DL_REL_IN
     (DL_RELEASE_INDICATION)
PCO Type : SAP
Comments :
Parameter Name           |   Parameter Type    |    Comments
Detailed Comments :
Table 2 shows an example of a parameterized ASP. All ASPs containing PDUs contain only that PDU and no other
parameters.
Table 2: TTCN ASP type definition DL_DATA_RQ
TTCN ASP Type Definition
ASP NAME : DL_DATA_RQ
     (DL_DATA_Request)
PCO Type : SAP
Comments : CEId: = (SAPI,CES) mapped onto
      DLCI: = (SAPI,TEI)
      ASP is used to request the transmission of layer 3 PDUs
Parameter Name           |   Parameter Type    |    Comments
mun (MessageUnit)         |PDU            |
Detailed Comments :
ETSI

---------------------- Page: 11 ----------------------

SIST EN 300 058-4 V1.2.4:2005
10 EN 300 058-4 V1.2.4 (1998-06)
6.1.1.3.2 ASN.1 ASP type definitions
There are no ASN.1 ASP type definitions in the ATS.
6.1.1.4 PDU type definitions
6.1.1.4.1 TTCN PDU type definitions
The TTCN PDU type reflects the actual data being transferred or received. All PDUs are embedded in ASPs.
If a specific PDU type definition contains elements defined in terms of a pre-defined type, that element has a restriction
attached to it.
6.1.1.4.2 ASN.1 PDU type definitions
There are no ASN.1 PDU type definitions in the ATS.
6.1.2 Test suite constants
No test suite constants are used or defined in this ATS.
6.1.3 Test suite parameters
Each test suite parameter is defined in terms of a predefined type or a referenced type. A referenced type is used when it
is necessary to attach restrictions to these type definitions (it is not allowed to include restrictions directly in the test
suite parameter table). The referenced type can have a length or value restriction attached to it in its declaration table.
6.1.4 Variables
6.1.4.1 Test suite variables
No test suite variables are used or defined in this ATS.
6.1.4.2 Test case variables
Each test case variable is defined in terms of a predefined type or a referenced type. A referenced type is used when it is
necessary to attach restrictions to
...