ETSI TS 102 841 V1.5.1 (2014-01)

Digital Enhanced Cordless Telecommunications (DECT); New Generation DECT; Extended wideband speech services; Profile Test Specification (PTS) and Test Case Library (TCL)

RTS/DECT-NG271

General Information

• Status: Published
• Publication Date: 14-Jan-2014
• Technical Committee: DECT NewGen - DECT NewGeneration
• Current Stage: 12 - Completion
• Due Date: 20-Jan-2014
• Completion Date: 15-Jan-2014

Standards Content (Sample)

Technical Specification
Digital Enhanced Cordless Telecommunications (DECT);
New Generation DECT;
Extended wideband speech services;
Profile Test Specification (PTS) and Test Case Library (TCL)

2 ETSI TS 102 841 V1.5.1 (2014-01)

Reference
RTS/DECT-NG271
Keywords
codec, DECT, GAP, IMT-2000, interoperability,
IP, profile, speech, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2014.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI TS 102 841 V1.5.1 (2014-01)
Contents
Intellectual Property Rights . 6
Foreword . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 10
3.3 Abbreviations . 11
4 Test method . 12
4.1 Test platform . 12
4.1.1 PP test platform . 12
4.1.1.1 List content for tests . 13
4.1.1.1.1 List of supported lists . 13
4.1.1.1.2 Missed calls list . 13
4.1.1.1.3 Outgoing calls list . 13
4.1.1.1.4 Incoming accepted calls list . 14
4.1.1.1.5 All calls list . 14
4.1.1.1.6 Contact list . 16
4.1.1.1.7 Internal names list. 16
4.1.1.1.8 DECT system settings list. 17
4.1.1.1.9 Line settings list . 17
4.1.1.1.10 All incoming calls list . 19
4.1.2 FP test platform . 19
4.1.2.1 List content for tests . 21
4.1.3 NG-DECT Part 1 backward compatibility test platform . 21
4.2 Hypothesis . 22
4.3 Test groups . 22
4.3.1 Network features . 22
4.3.2 Application features . 22
5 Test Cases (TCs) . 22
5.1 TC definition conventions . 22
5.1.1 Test equipment implementation requirements . 23
5.2 TC naming conventions . 25
5.3 Portable Part TC purposes . 25
5.3.1 List of New Generation DECT Part 3 PT tests cases related to NG-DECT Part 1 features . 25
5.3.2 List of New Generation DECT Part 3 PT tests cases . 26
5.4 Fixed Part TC purposes . 32
5.4.1 List of New Generation DECT Part 3 FT tests cases related to NG-DECT Part 1 features . 32
5.4.2 List of New Generation DECT Part 3 FT tests cases . 32
6 Portable Part Test specification . 40
6.1 TC_PT_NG1.N.1 Codec negotiation tests cases . 40
6.2 TC_PT_NG1.N.2 Codec switching tests cases. 43
6.3 TC_PT_NG1.N.3 Missed call notification tests cases . 44
6.4 TC_PT_NG1.N.4 Voice message waiting notification tests cases . 44
6.5 TC_PT_NG1.N.5 Date and time synchronization tests cases . 45
6.6 TC_PT_NG1.N.6 Parallel calls tests cases . 45
6.7 TC_PT_NG1.N.7 Common parallel call procedures tests cases . 48
6.8 TC_PT_NG1.N.8 Call transfer tests cases . 55
6.9 TC_PT_NG1.N.9 3-party conference with established external and/or internal calls tests cases . 58
6.10 TC_PT_NG1.N.10 Intrusion call tests cases . 59
6.11 TC_PT_NG1.N.11 Call deflection (external or internal) tests cases . 67
ETSI
4 ETSI TS 102 841 V1.5.1 (2014-01)
6.12 TC_PT_NG1.N.12 Line identification tests cases . 69
6.13 TC_PT_NG1.N.13 Call identification tests cases . 72
6.14 TC_PT_NG1.N.14 Multiple lines tests cases . 75
6.15 TC_PT_NG1.N.15 Multiple calls tests cases . 79
6.16 TC_PT_NG1.N.16 List access service tests cases . 82
6.17 TC_PT_NG1.N.17 Calling line identity restriction tests cases . 142
6.18 TC_PT_NG1.N.18 Call forwarding (external calls) tests cases . 143
6.19 TC_PT_NG1.N.19 DTMF handling tests cases . 144
6.20 TC_PT_NG1.N.20 Tones provision tests cases . 144
6.21 TC_PT_NG1.N.21 Headset management tests cases . 146
6.22 TC_PT_NG1.N.22 Handling of lines where second calls are signalled in-band tests cases . 150
6.23 TC_PT_GAP.N.30 Calling Line Identification Presentation tests cases . 151
6.24 TC_PT_GAP.N.31 Internal call tests cases . 151
6.25 TC_PT_GAP.N.34 Calling Name Identification Presentation tests cases . 153
6.26 TC_PT_GAP.N.35 Enhanced security tests cases . 154
6.27 TC_PT_NG1.A.1 Easy PIN code registration tests cases . 162
6.28 TC_PT_NG1.A.2 Easy pairing registration tests cases . 164
6.29 TC_PT_NG1.A.3 Handset locator tests cases . 164
7 Fixed Part Test specification . 165
7.1 TC_FT_NG1.N.1 Codec negotiation tests cases . 165
7.2 TC_FT_NG1.N.2 Codec switching tests cases. 169
7.3 TC_FT_NG1.N.3 Missed call notification tests cases . 169
7.4 TC_FT_NG1.N.4 Voice message waiting notification tests cases . 170
7.5 TC_FT_NG1.N.5 Date and time synchronization tests cases . 170
7.6 TC_FT_NG1.N.6 Parallel calls tests cases . 171
7.7 TC_FT_NG1.N.7 Common parallel call procedures tests cases . 173
7.8 TC_FT_NG1.N.8 Call transfer tests cases . 181
7.9 TC_FT_NG1.N.9 3-party conference with established external and/or internal calls tests cases . 187
7.10 TC_FT_NG1.N.10 Intrusion call tests cases . 190
7.11 TC_FT_NG1.N.11 Call deflection (external or internal) tests cases . 200
7.12 TC_FT_NG1.N.12 Line identification tests cases . 202
7.13 TC_FT_NG1.N.13 Call identification tests cases . 206
7.14 TC_FT_NG1.N.14 Multiple lines tests cases . 210
7.15 TC_FT_NG1.N.15 Multiple calls tests cases . 217
7.16 TC_FT_NG1.N.16 List access service tests cases . 221
7.17 TC_FT_NG1.N.17 Calling line identity restriction tests cases . 270
7.18 TC_FT_NG1.N.18 Call forwarding (external calls) tests cases . 271
7.19 TC_FT_NG1.N.19 DTMF handling tests cases . 273
7.20 TC_FT_NG1.N.20 Tones provision tests cases . 273
7.21 TC_FT_NG1.N.21 Headset management tests cases . 276
7.22 TC_FT_NG1.N.22 Handling of lines where second calls are signalled in-band tests cases . 280
7.23 TC_FT_GAP.N.30 Calling Line Identification Presentation tests cases . 283
7.24 TC_FT_GAP.N.31 Internal call tests cases . 283
7.25 TC_FT_GAP.N.34 Calling Name Identification Presentation tests cases . 284
7.26 TC_FT_GAP.N.35 Enhanced security tests cases . 285
7.27 TC_FT_NG1.A.1 Easy PIN code registration tests cases . 291
7.28 TC_FT_NG1.A.2 Easy pairing registration tests cases . 291
7.29 TC_FT_NG1.A.3 Handset locator tests cases . 292
Annex A (normative): Declarations on features and procedures supported . 294
A.1 Declarations for portable part . 294
A.1.1 Optional PT features . 294
A.1.2 Extra information for PT testing . 294
A.1.3 Optional or conditional PT procedures . 295
A.1.4 PT relevant test cases list . 297
A.1.4.1 PT is a normal PT (not a headset portable part) . 298
A.1.4.2 PT is a headset portable part . 298
A.2 Declarations for fixed part . 298
A.2.1 Optional FT features . 298
A.2.2 Extra information for FT testing . 299
ETSI
5 ETSI TS 102 841 V1.5.1 (2014-01)
A.2.3 Optional or conditional FT procedures . 301
A.2.4 FT relevant test cases list . 306
A.2.4.1 FT handling only 'Common parallel call procedures' lines . 306
A.2.4.2 FT handling only 'double call with in-band signalling' lines . 306
A.2.4.3 FT handling 'Common parallel call procedures' lines and 'double call with in-band signalling' lines . 307
Annex B (informative): List of NG-DECT Part 3 procedures . 308
Annex C (normative): Configuration for testing . 314
C.1 Portable part configuration to be declared by supplier . 314
C.2 Fixed part internal configuration to be declared by supplier . 314
C.3 Test environment configuration to be declared by test house or supplier . 315
Annex D (normative): Amendments to other DECT specifications . 317
D.1 Amendments to the Technical Basis for Regulation TBR 022 amended by TBR 022/A1
applicable to equipment compliant with TS 102 527-3 . 317
D.1.1 Additional testing requirements for PP side . 317
D.1.1.1 Modifications to Clause A.2.1.1.2 "CC features" . 318
D.1.1.2 Modifications to Clause A.2.1.1.4 "SS features (services)" . 318
D.1.1.3 Modifications to Clause A.2.1.1.6 "Procedures" . 319
D.1.2 Additional testing requirements for FP side . 319
D.1.2.1 Modifications to Clause A.3.1.1.2 "CC features" . 320
D.1.2.2 Modifications to Clause A.3.1.1.3 "MM features" . 321
D.1.2.3 Modifications to Clause A.3.1.1.6 "Procedures" . 322
D.1.3 Additional Test Cases applicable to equipment compliant with TS 102 527-3 . 322
D.1.3.1 Additional PT NWK layer test cases . 322
D.1.3.2 Additional FT NWK layer test cases . 323
History . 324

ETSI
6 ETSI TS 102 841 V1.5.1 (2014-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Digital Enhanced Cordless
Telecommunications (DECT).
The present document is based on EN 300 175 parts 1 [1] to 8 [8], EN 300 444 [12], TS 102 527-1 [13] and
TS 102 527-3 [14]. General attachment requirements and speech attachment requirements are based on
EN 300 176-1 [9], EN 301 406 [11] (replacing TBR 006 [i.2]) and EN 300 176-2 [10] (previously covered by
TBR 010 [i.3]). Further details of the DECT system may be found in TR 101 178 [i.1].
The information in the present document is believed to be correct at the time of publication. However, DECT
standardization is a rapidly changing area, and it is possible that some of the information contained in the present
document may become outdated or incomplete within relatively short time-scales.
All numbers and names used in examples are imaginary. Any similarities to actual persons, places or directory numbers
are merely coincidental.
ETSI
7 ETSI TS 102 841 V1.5.1 (2014-01)
1 Scope
The present document contains the Profile Test Specification (PTS) and the Test Case Library (TCL) for "New
Generation DECT; Part 3: Extended wideband speech" (TS 102 527-3 [14]). The present document covers both the
Portable (PT) and the Fixed (FT) Radio terminations.
The Test Case Library (TCL) covers also some test cases for "DECT New Generation; Part 1: Wideband speech"
(TS 102 527-1 [13]) and for the "Generic Access Profile" (EN 300 444 [12]). This is done because such test cases are
mandatory or especially relevant for New Generation DECT part 3 (see TS 102 527-3 [14]), and are not covered by
existing GAP test specifications.
Due to the ascending compatibility of DECT profiles, all New Generation DECT part 3 devices (see TS 102 527-3 [14])
are required to be also compliant with "DECT New Generation; Part 1: Wideband speech" (TS 102 527-1 [13]) and
with the "Generic Access Profile" (GAP, EN 300 444 [12]). Annex D of the present document specifies the
modifications to GAP test cases for requirements and tests that are optional in GAP test specifications (see note), but
that become mandatory by the support of the corresponding GAP features in New Generation DECT Part 3.
NOTE: The industry de-facto standard practice for insuring the compliance to GAP [12] is the use of
TBR 022 [i.4] amended by TBR 022/A1 [i.5], even when these two documents do not have any longer
their initial regulatory signification. TBR 022 [i.4] relies on the GAP Profile Test Specification
(EN 300 494 parts 1 [i.6] to 3 [i.8]) and on the DECT Test Case Library (EN 300 497 parts 1 [i.9]
to 9 [i.17]). GAP test suite includes also the GAP Profile Implementation Conformance Statement (PICS)
(EN 300 474 parts 1 [i.25] and 2 [i.26]) and the DECT Common Interface (CI) Profile Implementation
Conformance Statement (PICS) (EN 300 476 parts 1 [i.18] to 7 [i.24]).
The objective of the present document is to provide a basis for approval tests of NG-DECT Part 3 equipment giving a
high probability of air interface inter-operability between different manufacturer's DECT equipment.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 1: Overview".
[2] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 2: Physical layer (PHL)".
[3] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 3: Medium Access Control (MAC) layer".
[4] ETSI EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] ETSI EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 5: Network (NWK) layer".
ETSI
8 ETSI TS 102 841 V1.5.1 (2014-01)
[6] ETSI EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 6: Identities and addressing".
[7] ETSI EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 7: Security features".
[8] ETSI EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 8: Speech and audio coding and transmission".
[9] ETSI EN 300 176-1: "Digital Enhanced Cordless Telecommunications (DECT); Test
specification; Part 1: Radio".
[10] ETSI EN 300 176-2: "Digital Enhanced Cordless Telecommunications (DECT); Test
specification; Part 2: Audio and speech".
[11] ETSI EN 301 406: "Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for
Digital Enhanced Cordless Telecommunications (DECT) covering the essential requirements
under article 3.2 of the R&TTE Directive; Generic radio".
[12] ETSI EN 300 444: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP)".
[13] ETSI TS 102 527-1: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 1: Wideband Speech".
[14] ETSI TS 102 527-3: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 3: Extended wideband speech services".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 101 178: "Digital Enhanced Cordless Telecommunications (DECT); A high Level Guide
to the DECT Standardization".
[i.2] ETSI TBR 006: "Digital Enhanced Cordless Telecommunications (DECT); General terminal
attachment requirements".
[i.3] ETSI TBR 010: "Digital Enhanced Cordless Telecommunications (DECT); General terminal
attachment requirements: Telephony applications".
[i.4] ETSI TBR 022: "Radio Equipment and Systems (RES); Attachment requirements for terminal
equipment for Digital Enhanced Cordless Telecommunications (DECT) Generic Access Profile
(GAP) applications".
[i.5] ETSI TBR 022/A1: Amendment to: "Radio Equipment and Systems (RES); Attachment
requirements for terminal equipment for Digital Enhanced Cordless Telecommunications (DECT)
Generic Access Profile (GAP) applications".
[i.6] ETSI EN 300 494-1: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile Test Specification (PTS); Part 1: Summary".
[i.7] ETSI EN 300 494-2: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS)
- Portable radio Termination (PT)".
[i.8] ETSI EN 300 494-3: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS)
- Fixed radio Termination (FT)".
[i.9] ETSI EN 300 497-1: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 1: Test Suite Structure (TSS) and Test Purposes (TP)
for Medium Access Control (MAC) layer".
ETSI
9 ETSI TS 102 841 V1.5.1 (2014-01)
[i.10] ETSI EN 300 497-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 2: Abstract Test Suite (ATS) for Medium Access
Control (MAC) layer - Portable radio Termination (PT)".
[i.11] ETSI EN 300 497-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 3: Abstract Test Suite (ATS) for Medium Access
Control (MAC) layer - Fixed radio Termination (FT)".
[i.12] ETSI EN 300 497-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 4: Test Suite Structure (TSS) and Test Purposes (TP)
- Data Link Control (DLC) layer".
[i.13] ETSI EN 300 497-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 5: Abstract Test Suite (ATS) - Data Link Control
(DLC) layer".
[i.14] ETSI EN 300 497-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 6: Test Suite Structure (TSS) and Test Purposes (TP)
- Network (NWK) layer - Portable radio Termination (PT)".
[i.15] ETSI EN 300 497-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 7: Abstract Test Suite (ATS) for Network (NWK)
layer - Portable radio Termination (PT)".
[i.16] ETSI EN 300 497-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 8: Test Suite Structure (TSS) and Test Purposes (TP)
- Network (NWK) layer - Fixed radio Termination (FT)".
[i.17] ETSI EN 300 497-9: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 9: Abstract Test Suite (ATS) for Network (NWK)
layer - Fixed radio Termination (FT)".
[i.18] ETSI EN 300 476-1: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma;
Part 1: Network (NWK) layer - Portable radio Termination (PT)".
[i.19] ETSI EN 300 476-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 2: Data
Link Control (DLC) layer - Portable radio Termination (PT)".
[i.20] ETSI EN 300 476-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma;
Part 3: Medium Access Control (MAC) layer - Portable radio Termination (PT)".
[i.21] ETSI EN 300 476-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma;
Part 4: Network (NWK) layer - Fixed radio Termination (FT)".
[i.22] ETSI EN 300 476-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 5: Data
Link Control (DLC) layer - Fixed radio Termination (FT)".
[i.23] ETSI EN 300 476-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma;
Part 6: Medium Access Control (MAC) layer - Fixed radio Termination (FT)".
[i.24] ETSI EN 300 476-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma;
Part 7: Physical layer".
[i.25] ETSI EN 300 474-1: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile requirement list and profile specific Implementation Conformance
Statement (ICS) proforma; Part 1: Portable radio Termination (PT)".
ETSI
10 ETSI TS 102 841 V1.5.1 (2014-01)
[i.26] ETSI EN 300 474-2: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile requirement list and profile specific Implementation Conformance
Statement (ICS) proforma; Part 2: Fixed radio Termination (FT)".
[i.27] Recommendation ITU-T P.311 (2005): "Transmission characteristics for wideband (150-7000 Hz)
digital handset telephones".
[i.28] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in TS 102 527-3 [14], TS 102 527-1 [13],
EN 300 444 [12] and the following apply:
GAP (PP, FP, device or equipment): PP, FP or any of them compliant with EN 300 444 [12]
golden device: ideal example of a device used as reference device for compliance testing and against which later
devices are tested and judged
NG-DECT Part 1 golden device: golden device, such as the one administered by the DECT Forum, used for
compliance testing of NG-DECT Part 1 [13] equipment
NG-DECT Part 1 (PP, FP, device or equipment), also shortened as Part 1 (PP, FP, device or equipment): PP, FP
or any of them compliant with TS 102 527-1 [13]
NG-DECT Part 3 (PP, FP, device or equipment), also shortened as Part 3 (PP, FP, device or equipment): PP, FP
or any of them compliant with TS 102 527-3 [14]
Off-hook CLIP: ability of a network to send CLIP information for a waiting call (also known as "CLIP on call
waiting" or "CLIP phase II")
ZAP: ability first to assign and then to re-program the account data held in the PP
3.2 Symbols
For the purposes of the present document, the following symbols apply:
M mandatory to support (provision mandatory, process mandatory)
O optional to support (provision optional, process mandatory)
I out-of-scope (provision optional, process optional) not subject for testing
C conditional to support (process mandatory)
N/A not applicable (in the given context the present document makes it impossible to use this
capability)
Provision mandatory, process mandatory means that the indicated feature service or procedure is to be implemented as
described in the present document, and may be subject to testing.
Provision optional, process mandatory means that the indicated feature, service or procedure may be implemented, and
if implemented, the feature, service or procedure is to be implemented as described in the present document, and may
be subject to testing.
NOTE: The used notation is based on the notation proposed in ISO/IEC 9646-7 [i.28].
ETSI
11 ETSI TS 102 841 V1.5.1 (2014-01)
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AAC-LD Advanced Audio Coding - Low Delay
AC Authentication Code
ADPCM Adaptive Delta Pulse Code Modulation
AP Application
BCD Binary Code Decimal
CC Call Control
CFB Call forwarding on Busy subscriber
CFNA Call forwarding on No Answer
CFU Call forwarding Unconditional
CI Common Interface
CISS Call Independant Supplementary Services
CLIP Calling Line Identification Presentation
CLIR Calling Line Identification Restriction
CLMS Connection Less Message Service
CNIP Calling Name Identification Presentation
CS Call Status
DCIBS Double Call with In-Band Signalling
DCK Derived Cypher Key
DECT Digital Enhanced Cordless Telecommunications
DHCP Dynamic Host Configuation Protocol
DLC Data Link Control
DNS Domain Name Server
DTMF Dual Tone Multi-Frequency
ER Enhanced Rate
FP Fixed Part
FT Fixed radio Termination
GAP Generic Access Profile
GFSK Gaussian Filtered Frequency Shift Keying
HATS Head and Torso Simulator
HPP Headset Portable Part
HTTP HyperText Transfer Protocol
IA-5 International Alphabet-5
IE Information Element
IP Internet Protocol
ISDN Integrated Services Digital Network
IUT Implementation Under Test
IWU InterWorking Unit
IXIT Implementation eXtra Information for Testing
LA List Access
LAPC Link Access Protocol for the Control plane
LiA List Access
LU Link access protocol User
MAC Medium Access Control
MM Mobility Management
MMI Man and Machine Interface
MPEG Moving Picture Expert Group
NB Narrow Band
NDT Network Delay Type
NEM No Emission Mode
NG New Generation
NG-DECT New Generation DECT
NWK NetWorK
PABX Private Automatic Branch Exchange
PBX Private Branch eXchange
PCM Pulse Code Modulation
PHL PHysical Layer
PHY PHYsical layer
ETSI
12 ETSI TS 102 841 V1.5.1 (2014-01)
PIN Personal Identification Number
PLC Packet Loss Concealment
PP Portable Part
PSTN Public Switched Telephone Network
PT Portable radio Termination
PTS Profile Test Specification
RF Radio Frequency
RFPI Radio Fixed Part Identity
SARI Secondary Access Rights Identity
SC Speech Coding
SIP Session Initiated Protocol
SS Supplementary Services
TC Test Case
TCL Test Case Library
TPUI Temporary Portable User Identity
TRUP Transparent UnProtected
TS Test System
UNF Unprotected Framed
USR USeR
UTF Unicode Transformation Format
VoIP Voice over IP
WB WideBand
4 Test method
This clause describes the test method used to test the NG-DECT Part 3 devices.
Device Under
Test System
Test
Application
Tester
NWK PDUs
DECT NWK
IUT
DECT DLC DECT DLC
DECT MAC DECT MAC
DECT PHL DECT PHL
Figure 1: New Generation DECT remote test method
Tester: A tester is located in a remote DECT test system. It controls and observes the behaviour of the
Implementation Under Test (IUT). The TS behaves as a FP (or a PP) when testing a PP
(respectively a FP).
4.1 Test platform
4.1.1 PP test platform
The PP test platform is depicted on Figure 2.
ETSI
13 ETSI TS 102 841 V1.5.1 (2014-01)
Test System
RF front end 1
NG FP
TS_1 P
DUT
P
PP2 (see note)
TS_2
RF front end 2
Device Under Test
NOTE: PP2 behaves either as a NG PP or a legacy GAP PP according to test case.

Figure 2: PP test platform
The first RF front-end of Test system "TS_1" plays the role of a NG FP to which the tested PP is paired.
The following devices are needed to perform parallel call test cases: either a NG PP or a GAP legacy PP. The second
RF front-end of Test system "TS_2" plays the role of one of these PPs according to test case condition.
4.1.1.1 List content for tests
The following list contents will be used by the tester when running List access PP test cases.
4.1.1.1.1 List of supported lists
All lists are supported (list identifiers from 00H to 09H).
4.1.1.1.2 Missed calls list
Presence of 3 missed calls with a total number of 10 entries in the list.
Table 1: Missed calls test list content
Number Name Date and time Unread Line name Line id Nb of
calls
497312456897 JENDREZEJZAK 09/09/09 06:45:00 1 Provider 1 0, 0 2
0145567897 06/09/09 18:48:00 1 Provider 1 0, 0 3
00441324778824 C.Alexander 06/09/09 15:36:36 0 Provider 1 0, 0 1
0321259514 LE BIHAN 06/09/09 15:36:00 1 Provider 2 0, 1 1
0296301005 06/09/09 12:35:00 0 Provider 1 0, 0 1
008989945270 M.UWE 02/09/09 11:17:00 0 Provider 3 0, 2 1
0177476923 C.FENRIJO 01/09/09 14:08:00 0 Provider 1 0, 0 1
4526300099446770 B.ZIMMERMANN 30/08/09 18:50:00 0 Provider 3 0, 2 1
0675000209 R.ALOUSSI 22/08/09 12:00:00 0 Provider 1 0, 0 1
0247413706 VAN DER VYNC 20/08/09 18:15:00 0 Provider 2 0, 1 1

Properties
- For all fields, editable=0;
- For Number, Line name, and Line id fields: PIN protected=0.
4.1.1.1.3 Outgoing calls list
Total number of 10 entries in the list.
ETSI
14 ETSI TS 102 841 V1.5.1 (2014-01)
Table 2: Outgoing calls test list content
Number Name Date and time Line name Line id
008989945270 UWE 08/09/09 13:13:13 Provider 1 0, 0
0145567897 07/09/09 09:09:09 Provider 1 0, 0
0675000321 WOJCIECHOSKI 06/09/09 08:33:33 Provider 1 0, 0
0612345678 FENJIRO 06/09/09 08:22:22 Provider 2 0, 2
0490413002 FENJIRO 06/09/09 08:12:12 Provider 2 0, 2
00550123456789 G. DEL PIETRO 03/09/09 07:07:07 Provider 3 0, 0
4526300099446770 B.ZIMMERMANN 31/08/09 23:23:23 Provider 1 0, 0
00449876543210 C.ALEXANDER 31/08/09 16:16:16 Provider 3 0, 2
0296301005 28/08/09 17:17:17 Provider 1 0, 0
02298951214 LAGADEC 27/08/09 18:18:18 Provider 1 0, 0

Properties
- For all fields, editable=0.
- For Number, Line name, and Line id fields: PIN protected=0.
4.1.1.1.4 Incoming accepted calls list
Total number of 10 entries in the list.
Table 3: Incoming accepted calls test list content
Number Name Date Time Line name Line id
02298951214 J.LAGADEC 07/09/09 12:12:12 Provider 1 0, 0
0321259514 LE BIHAN 06/09/09 18:36:18 Provider 2 0, 1
0308980764 06/09/09 08:24:24 Provider 1 0, 0
0581321185 K.BORDONADO 06/09/09 08:16:16 Provider 1 0, 0
00441324778824 C.Alexander 06/09/09 08:16:08 Provider 1 0, 0
00550123456789 G. DEL PIETRO 02/09/09 09:18:09 Provider 3 0, 2
0296301005 01/09/09 20:40:20 Provider 1 0, 0
00449876543210 C.ALEXANDER 31/08/09 12:24:12 Provider 3 0, 2
0425960406 D.LE BRAZ 25/08/09 18:36:18 Provider 2 0, 1
0675000321 WOJCIECHOSKI 22/08/09 11:22:11 Provider 1 0, 0

Properties
- For all fields, editable=0.
- For Number, Line name, and Line id fields: PIN protected=0.
4.1.1.1.5 All
...