Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 1: General requirements

DEN/ATTM-003

Dostop, terminali, prenos in multipleksiranje (ATTM) - Upravljanje z energijo - Operativna infrastruktura - Globalni ključni kazalniki uspešnosti (KPI) - 1. del: Splošne zahteve

Trenutni dokument opisuje področje upravljanja z energijo pri širokopasovni operativni infrastrukturi, ki ga obravnava ta večdelni dokument, njihove medsebojne povezave in omejitve.
Določa naslednje vidike globalnih ključnih kazalnikov uspešnosti (KPI) v povezavi z upravljanjem energije za širokopasovno operativno infrastrukturo:
• skupni cilji v zvezi s porabo energije:
- poraba energije;
- učinkovitost opravil;
- ponovna uporaba energije;
- obnovljiva energija;
• splošne zahteve za vse KPI, opredeljene v drugih standardih skupine ETSI EN 305 200 [i.2] v zvezi z naslednjim:
- skalabilnost infrastrukture;
- razvoj infrastrukture;
- formule in opredelitve pojmov;
- merilne točke in postopki;
• uporaba KPI.
Učinek na okolje in upravljanje različnih virov energije ne spadata na področje uporabe tega dokumenta.
V tem dokumentu:
• točka 4 pojasnjuje okvir, na katerem temelji potreba po razvoju globalnih KPI za energetsko učinkovitost, in predstavlja ciljne KPI, na katerih temeljijo globalni KPI;
• točka 5 določa splošne zahteve, ki se uporabljajo za vse KPI, opredeljene v skupini standardov ETSI EN 305 200-2 in skupini standardov ETSI EN 305 200-3;
• točka 6 vsebuje povzetek uporabe globalnih in ciljnih KPI, opredeljenih v skupini standardov ETSI EN 305 200-2 in skupini standardov ETSI EN 305 200-3;

General Information

Status
Published
Publication Date
11-Jul-2018
Current Stage
12 - Completion
Due Date
18-Jul-2018
Completion Date
12-Jul-2018
Mandate

Buy Standard

Standard
EN 305 200-1 V1.1.1:2018
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETSI EN 305 200-1 V1.1.1 (2018-07) - Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 1: General requirements
English language
19 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 305 200-1 V1.1.0 (2018-04) - Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 1: General requirements
English language
19 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Access, Terminals, Transmission and Multiplexing (ATTM) - Energy management - Operational infrastructures - Global KPIs - Part 1: General requirements35.020Informacijska tehnika in tehnologija na splošnoInformation technology (IT) in general27.015VSORãQREnergy efficiency. Energy conservation in generalICS:Ta slovenski standard je istoveten z:ETSI EN 305 200-1 V1.1.1 (2018-07)SIST EN 305 200-1 V1.1.1:2018en01-september-2018SIST EN 305 200-1 V1.1.1:2018SLOVENSKI
STANDARD



SIST EN 305 200-1 V1.1.1:2018



ETSI EN 305 200-1 V1.1.1 (2018-07) Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 1: General requirements
EUROPEAN STANDARD SIST EN 305 200-1 V1.1.1:2018



ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 2
Reference DEN/ATTM-003 Keywords broadband, energy management, ICT, sustainability ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETM are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM® and the GSM logo are trademarks registered and owned by the GSM Association. SIST EN 305 200-1 V1.1.1:2018



ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 3Contents Intellectual Property Rights . 5 Foreword . 5 Modal verbs terminology . 6 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 8 3 Definitions, symbols and abbreviations . 8 3.1 Definitions . 8 3.2 Symbols . 9 3.3 Abbreviations . 10 4 Context for Key Performance Indicators (KPI). 10 4.1 Energy management and sustainability concepts . 10 4.2 Differentiation of Key Performance Indicators . 10 4.2.1 General . 10 4.2.2 Technical KPIs . 11 4.2.3 Objective KPIs . 12 4.2.3.1 General . 12 4.2.3.2 Energy consumption within ETSI EN 305 200 series . 12 4.2.3.3 Task effectiveness within ETSI EN 305 200 series . 12 4.2.3.4 Energy re-use within ETSI EN 305 200 series . 13 4.2.3.5 Renewable energy within ETSI EN 305 200 series . 13 4.2.4 Global KPIs . 13 4.2.4.1 General . 13 4.2.4.2 Global KPIs within ETSI EN 305 200 series . 13 5 Requirements for Global and Objective KPIs . 14 5.1 General . 14 5.2 Scale . 14 5.3 Utilization and evolution . 15 5.4 Definition of boundaries . 15 5.5 Formulae. 15 5.5.1 General . 15 5.5.2 Definition of terms . 15 5.5.3 Clarity . 15 5.5.4 Criteria . 15 5.6 Measurement points and procedures . 15 5.6.1 Overview . 15 5.6.2 Detailed treatment . 16 5.7 Classifications . 17 5.8 Reporting . 17 6 The use of KPIs . 17 History . 19
SIST EN 305 200-1 V1.1.1:2018



ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 4List of figures Figure 1: The relationship of energy related Technical, Objective and Global KPIs .11 Figure 2: Schematic of the foundations of any Global KPI for energy management .14 Figure 3: Schematic of combinations of Objective KPIs within a Global KPI for energy management .14 Figure 4: Schematic showing application of TKPI , TREPEAT and Δt .16 Figure 5: Mathematical treatment of assessment timing .17
SIST EN 305 200-1 V1.1.1:2018



ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 5Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This European Standard (EN) has been produced by ETSI Technical Committee Access, Terminals, Transmission and Multiplexing (ATTM). The present document is part 1 of a multi-part deliverable covering Global Key Performance Indicators for energy management of operational broadband deployment infrastructures, as identified below: Part 1: "General requirements"; Part 2: "Specific requirements"; Part 3: "ICT Sites"; Part 4: "Design assessments".
National transposition dates Date of adoption of this EN: 4 July 2018 Date of latest announcement of this EN (doa): 31 October 2018 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 April 2019 Date of withdrawal of any conflicting National Standard (dow): 30 April 2019
SIST EN 305 200-1 V1.1.1:2018



ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 6Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction Energy costs continue to rise, a trend that will continue in the future, while broadband penetration is introducing new active equipment to the network architecture. In this context, and to reflect other environmental aspects of sustainability, it is vital that the main telecommunication operators implement effective general engineering of fixed and mobile broadband networks and sites provisioning, managing or using those networks (i.e. ICT sites) in order to respond to critical issues of energy consumption while proposing essential solutions to broadband deployment. To guide this process, it is essential that metrics are defined, termed Global Key Performance Indicators (KPIs), that enable energy usage to be managed more effectively. The Global Key Performance Indicators specified in the standards in the ETSI EN 305 200 series [i.2] address operational infrastructures and do not consider design or operation of individual components comprising those infrastructures. The ETSI EN 305 200 [i.2] multi-part deliverable comprises: • The present document: a generic requirements document addressing Global KPIs for operational infrastructures. • A sub-series ETSI EN 305 200-2 that defines the Global KPIs, and drives energy management targets, for specific operational networks and sites and which describes how the Global KPIs are to be applied (which may be used to support future regulatory objectives): - ETSI EN 305 200-2-1 [i.3]: "ICT sites"; - ETSI EN 305 200-2-2 [i.4]: "Fixed broadband access networks"; NOTE: Excluding cable access networks. - ETSI EN 305 200-2-3 [i.5]: "Mobile broadband access networks". The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain information on values that have been used by certain organizations. • A sub-series ETSI EN 305 200-3 including ETSI EN 305 200-3-1 [i.6] that defines particular implementations of Global KPIs within ICT sites based on the requirements of ETSI EN 305 200-2-1 [i.3], and which may define levels of performance to simplify and provide clearer understanding of Global KPIs allowing the evaluation of performance of energy use management in ICT sites. The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain information on values that have been used by certain organizations. • A sub-series ETSI EN 305 200-4 including ETSI EN 305 200-4-4 [i.7] that defines design assessments of Global KPIs, and drives energy management targets, for specific operational networks and sites and which describes how the Global KPIs are to be applied (which may be used to support future regulatory objectives). These standards may be considered to be a contribution to the application of ISO 50001 [i.8] in relation to the development of policy for the continuous improvement of energy management and will accelerate: • the availability of operational infrastructure architectures and network implementations that use energy more efficiently; • the definition and attainment objectives for other environmental aspects of sustainability for operational broadband networks. SIST EN 305 200-1 V1.1.1:2018



ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 71 Scope The present document describes the energy management landscape of the operational infrastructures of broadband deployment addressed by this multi-part deliverable, their inter-relationship and boundaries. It specifies the following aspects for Global Key Performance Indicators in relation to energy management for the operational infrastructures of broadband deployment: • common objectives in relation to energy consumption: - energy consumption; - task effectiveness; - energy re-use; - renewable energy; • general requirements for all KPIs specified in the other standards in the ETSI EN 305 200 series [i.2] in relation to: - infrastructure scalability; - infrastructure evolution; - formulae and definition of terms; - measurement points and procedures; • the use of KPIs. The environmental impact and management of different energy sources are outside the scope of the present document. Within the present document: • clause 4 explains the context underlying the need for the development of Global KPIs for energy efficiency and introduces the Objective KPIs upon which the Global KPIs are founded; • clause 5 specifies the general requirements that are applied to all KPIs defined within the standards in the ETSI EN 305 200-2 series and ETSI EN 305 200-3 series; • clause 6 summarizes the applicability of the Global and Objective KPIs defined within the standards in the ETSI EN 305 200-2 series and ETSI EN 305 200-3 series. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https://docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. Not applicable. SIST EN 305 200-1 V1.1.1:2018



ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 82.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings. [i.2] ETSI EN 305 200 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs". [i.3] ETSI EN 305 200-2-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 2: Specific requirements;
Sub-part 1: ICT Sites". [i.4] ETSI EN 305 200-2-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 2: Specific requirements;
Sub-part 2: Fixed broadband access networks". [i.5] ETSI EN 305 200-2-3: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 2: Specific requirements;
Sub-part 3: Mobile broadband access networks". [i.6] ETSI EN 305 200-3-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 3: ICT sites; Sub-part 1: DCEM". [i.7] ETSI EN 305 200-4-4: "Integrated broadband cable telecommunication networks (CABLE); Energy management; Operational infrastructures; Global KPIs; Part 4: Design assessments; Sub-part 4: Cable access networks". [i.8] ISO 50001: "Energy management systems - Requirements with guidance for use". [i.9] ISO Guide 82: "Guide for addressing sustainability in standards". 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: access network: functional elements (that is equipment and infrastructure) that enable communication between an operator site (OS) and a customer network cable access network: access network provided by cable operators comprising optical fibre and metallic cabling providing direct connection to customer premises energy consumption: total consumption of energy by an operational infrastructure energy management: combination of reduced energy consumption and increased task effectiveness, re-use of energy and use of renewable energy energy re-use: transfer or conversion of energy (typically in the form of heat) produced by the operational infrastructure to do other work SIST EN 305 200-1 V1.1.1:2018



ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 9fixed (broadband) access network: access network provided by telecommunications operators comprising optical fibre and metallic cabling providing direct connection to customer premises global KPI: KPI, combining two or more Objective KPIs, which reflects the overall energy management performance of an operational infrastructure ICT equipment: equipment providing data storage, processing and transport services NOTE: A combination of Information Technology Equipment and Network Telecommunications Equipment. ICT equipment load: total requirement for power by a set of information technology equipment (ITE) and/or network telecommunications equipment (NTE) ICT site: site containing structures or group of structures dedicated to the accommodation, interconnection and operation of ICT equipment together with all the facilities and infrastructures for power distribution and environmental control together with the necessary levels of resilience and security required to provide the desired service availability Information Technology Equipment (ITE): equipment providing data storage, processing and transport services for subsequent distribution by network telecommunications equipment (NTE) mobile access network: telecommunications network in which the access to the network (connection between user equipment and network) is implemented over the air interface Network Telecommunications Equipment (NTE): equipment between the boundaries of, and dedicated to providing connection to, core and/or access networks objective KPI: KPI assessing one of the objectives of operational energy performance which is subsequently used to define a Global KPI for energy management operational infrastructure: combination of ICT equipment together with the power supply and environmental control systems necessary to ensure provision of service renewable energy: energy produced from dedicated generation systems using resources that are naturally replenished and for which the energy required for production does not exceed 10 % of the energy produced NOTE: Directive 2010/31/EU [i.1] defines "energy from renewable sources" as energy from renewable non-fossil sources, namely wind, solar, aerothermal, geothermal, hydrothermal and ocean energy, hydropower, biomass, landfill gas, sewage treatment plant gas and biogases. task effectiveness: measure of the work done (as a result of design and/or operational procedures) for a given amount of energy consumed 3.2 Symbols For the purposes of the present document, the following symbols apply: Δt the maximum time variation between measurement points of the different Objective KPIs within a given Global KPI k
assessment period index KPIEC
Objective KPI of energy consumption KPIGlobal_Energy_Management
Global KPI of energy management KPIREN
Objective KPI of renewable energy usage KPIREUSE
Objective KPI of energy re-use KPITE
Objective KPI of task effectiveness TKPI
period of time over which Objective KPIs are assessed TREPEAT
the time between which the Objective and Global KPIs are assessed to determine relevant trend information WEC
weighting factor applied to KPIEC WL
weighting factor within KPIREUSE WREN
weighting factor applied to KPIREN WREUSE
weighting factor applied to KPIREUSE WTE
weighting factor applied to KPITE SIST EN 305 200-1 V1.1.1:2018



ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 103.3 Abbreviations For the purposes of the present document, the following abbreviations apply: DCEM Data processing and Communications Energy Management ICT Information and Communications Technology ISO International Organization for Standardization ITE Information Technology Equipment KPI Key Performance Indicator
NTE Network Telecommunications Equipment 4 Context for Key Performance Indicators (KPI) 4.1 Energy management and sustainability concepts ISO Guide 82 [i.9], entitled "Guide for addressing sustainability in standards", defines sustainability as "state of the global system, which includes environmental, social and economic subsystems, in which the needs of the present are met without compromising the ability of future generations to meet their own needs". The standards in the ETSI EN 305 200 series [i.2] do not specifically address any social and economic aspects of sustainability but do focus on the environmental issues in relation to the operational performance of infrastructures of deployed broadband. The standards in the ETSI EN 305 200 series [i.2] adopt the position that the environmental viability aspects of sustainability addressing those elements that relate directly to energy consumption and its outcomes within the locale of the broadband deployment infrastructures are within scope. Other aspects such as environmental elements relating to the wider impact of power generation (e.g. greenhouse gas, carbon), consumption of other resources (e.g. water), and issues such as life cycle assessment are out of scope. While it is self-evident that if less energy is consumed by an operational infrastructure then the environmental impact of that infrastructure will be reduced, it is equally important to consider: • the task effectiveness of the operation for which that energy is consumed; • while not wishing to encourage poor task effectiveness, some benefit can be seen if waste energy, typically in the form of heat, is re-used. This may substitute for, to some degree, energy from other sources. Energy consumption, task effectiveness, re-use of waste heat and the contribution of locally generated energy from renewable sources are considered to work in concert, albeit to different degrees for different infrastructures. In the ETSI EN 305 200 series [i.2], these four aspects are considered and specified as Objective KPIs from which Global KPIs are produced (see clause 4.2) which reflect energy management of operational systems - meeting the needs of operators and legislators alike. The imperatives placed on the different elements may vary from time to time - regulators specifically encouraging local generation of energy from renewable sources but then shifting focus on to other areas. 4.2 Differentiation of Key Performance Indicators 4.2.1 General It is common for equipment suppliers to define the energy efficiency of their products in terms of either: • the energy consumed to perform specific tasks; or • task performance improvements for a given energy consumption. Within the ETSI EN 305 200 series [i.2], these are considered, separately, as improvements in "energy consumption" and "task effectiveness" respectively. SIST EN 305 200-1 V1.1.1:2018



ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 11By comparison, operators and legislators are more interested in the performance of complete systems at an operational level taking into account global management aspects. As a result they apply a wider view of energy management that combines energy consumption and task effectiveness with more general objectives. Against this background, the standards in the ETSI EN 305 200 series [i.2] recognize and differentiate between three types of energy-related KPIs as shown schematically in Figure 1. Operational Global and Objective KPIs are fundamentally different to the Technical KPIs applied to products and systems at the design and engineering stages. The former are used to monitor and drive user behaviour whereas the latter are substantial indications of potential operational performance. It is therefore important to support, but differentiate, the role of the Technical KPIs from the Objective and Global operational KPIs.
Figure 1: The relationship of energy related Technical, Objective and Global KPIs Technical KPIs relate to the design and engineering phase for the components, sub-assemblies, products and systems to be employed in the infrastructures of broadband deployment. They are measured under specific operating conditions and provide indications of potential performance in an operational infrastructure. These are not addressed by the ETSI EN 305 200 series [i.2]. The left-hand side of Figure 1 relates to the Technical KPIs of the design and engineering phase for components, sub-assemblies, products and
...

ETSI EN 305 200-1 V1.1.1 (2018-07)






EUROPEAN STANDARD
Access, Terminals, Transmission and Multiplexing (ATTM);
Energy management;
Operational infrastructures;
Global KPIs;
Part 1: General requirements

---------------------- Page: 1 ----------------------
2 ETSI EN 305 200-1 V1.1.1 (2018-07)



Reference
DEN/ATTM-003
Keywords
broadband, energy management, ICT,
sustainability
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 305 200-1 V1.1.1 (2018-07)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 9
3.3 Abbreviations . 10
4 Context for Key Performance Indicators (KPI). 10
4.1 Energy management and sustainability concepts . 10
4.2 Differentiation of Key Performance Indicators . 10
4.2.1 General . 10
4.2.2 Technical KPIs . 11
4.2.3 Objective KPIs . 12
4.2.3.1 General . 12
4.2.3.2 Energy consumption within ETSI EN 305 200 series . 12
4.2.3.3 Task effectiveness within ETSI EN 305 200 series . 12
4.2.3.4 Energy re-use within ETSI EN 305 200 series . 13
4.2.3.5 Renewable energy within ETSI EN 305 200 series . 13
4.2.4 Global KPIs . 13
4.2.4.1 General . 13
4.2.4.2 Global KPIs within ETSI EN 305 200 series . 13
5 Requirements for Global and Objective KPIs . 14
5.1 General . 14
5.2 Scale . 14
5.3 Utilization and evolution . 15
5.4 Definition of boundaries . 15
5.5 Formulae. 15
5.5.1 General . 15
5.5.2 Definition of terms . 15
5.5.3 Clarity . 15
5.5.4 Criteria . 15
5.6 Measurement points and procedures . 15
5.6.1 Overview . 15
5.6.2 Detailed treatment . 16
5.7 Classifications . 17
5.8 Reporting . 17
6 The use of KPIs . 17
History . 19

ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 305 200-1 V1.1.1 (2018-07)
List of figures
Figure 1: The relationship of energy related Technical, Objective and Global KPIs .11
Figure 2: Schematic of the foundations of any Global KPI for energy management .14
Figure 3: Schematic of combinations of Objective KPIs within a Global KPI for energy management .14
Figure 4: Schematic showing application of T , T and Δt .16
KPI REPEAT
Figure 5: Mathematical treatment of assessment timing .17

ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 305 200-1 V1.1.1 (2018-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Access, Terminals, Transmission and
Multiplexing (ATTM).
The present document is part 1 of a multi-part deliverable covering Global Key Performance Indicators for energy
management of operational broadband deployment infrastructures, as identified below:
Part 1: "General requirements";
Part 2: "Specific requirements";
Part 3: "ICT Sites";
Part 4: "Design assessments".

National transposition dates
Date of adoption of this EN: 4 July 2018
Date of latest announcement of this EN (doa): 31 October 2018
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 April 2019
Date of withdrawal of any conflicting National Standard (dow): 30 April 2019

ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 305 200-1 V1.1.1 (2018-07)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
Energy costs continue to rise, a trend that will continue in the future, while broadband penetration is introducing new
active equipment to the network architecture. In this context, and to reflect other environmental aspects of
sustainability, it is vital that the main telecommunication operators implement effective general engineering of fixed
and mobile broadband networks and sites provisioning, managing or using those networks (i.e. ICT sites) in order to
respond to critical issues of energy consumption while proposing essential solutions to broadband deployment. To guide
this process, it is essential that metrics are defined, termed Global Key Performance Indicators (KPIs), that enable
energy usage to be managed more effectively.
The Global Key Performance Indicators specified in the standards in the ETSI EN 305 200 series [i.2] address
operational infrastructures and do not consider design or operation of individual components comprising those
infrastructures.
The ETSI EN 305 200 [i.2] multi-part deliverable comprises:
• The present document: a generic requirements document addressing Global KPIs for operational
infrastructures.
• A sub-series ETSI EN 305 200-2 that defines the Global KPIs, and drives energy management targets, for
specific operational networks and sites and which describes how the Global KPIs are to be applied (which may
be used to support future regulatory objectives):
- ETSI EN 305 200-2-1 [i.3]: "ICT sites";
- ETSI EN 305 200-2-2 [i.4]: "Fixed broadband access networks";
NOTE: Excluding cable access networks.
- ETSI EN 305 200-2-3 [i.5]: "Mobile broadband access networks".
The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain
information on values that have been used by certain organizations.
• A sub-series ETSI EN 305 200-3 including ETSI EN 305 200-3-1 [i.6] that defines particular implementations
of Global KPIs within ICT sites based on the requirements of ETSI EN 305 200-2-1 [i.3], and which may
define levels of performance to simplify and provide clearer understanding of Global KPIs allowing the
evaluation of performance of energy use management in ICT sites.
The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain
information on values that have been used by certain organizations.
• A sub-series ETSI EN 305 200-4 including ETSI EN 305 200-4-4 [i.7] that defines design assessments of
Global KPIs, and drives energy management targets, for specific operational networks and sites and which
describes how the Global KPIs are to be applied (which may be used to support future regulatory objectives).
These standards may be considered to be a contribution to the application of ISO 50001 [i.8] in relation to the
development of policy for the continuous improvement of energy management and will accelerate:
• the availability of operational infrastructure architectures and network implementations that use energy more
efficiently;
• the definition and attainment objectives for other environmental aspects of sustainability for operational
broadband networks.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI EN 305 200-1 V1.1.1 (2018-07)
1 Scope
The present document describes the energy management landscape of the operational infrastructures of broadband
deployment addressed by this multi-part deliverable, their inter-relationship and boundaries.
It specifies the following aspects for Global Key Performance Indicators in relation to energy management for the
operational infrastructures of broadband deployment:
• common objectives in relation to energy consumption:
- energy consumption;
- task effectiveness;
- energy re-use;
- renewable energy;
• general requirements for all KPIs specified in the other standards in the ETSI EN 305 200 series [i.2] in
relation to:
- infrastructure scalability;
- infrastructure evolution;
- formulae and definition of terms;
- measurement points and procedures;
• the use of KPIs.
The environmental impact and management of different energy sources are outside the scope of the present document.
Within the present document:
• clause 4 explains the context underlying the need for the development of Global KPIs for energy efficiency
and introduces the Objective KPIs upon which the Global KPIs are founded;
• clause 5 specifies the general requirements that are applied to all KPIs defined within the standards in the ETSI
EN 305 200-2 series and ETSI EN 305 200-3 series;
• clause 6 summarizes the applicability of the Global and Objective KPIs defined within the standards in the
ETSI EN 305 200-2 series and ETSI EN 305 200-3 series.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
ETSI

---------------------- Page: 7 ----------------------
8 ETSI EN 305 200-1 V1.1.1 (2018-07)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the
energy performance of buildings.
[i.2] ETSI EN 305 200 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs".
[i.3] ETSI EN 305 200-2-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements;
Sub-part 1: ICT Sites".
[i.4] ETSI EN 305 200-2-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements;
Sub-part 2: Fixed broadband access networks".
[i.5] ETSI EN 305 200-2-3: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements;
Sub-part 3: Mobile broadband access networks".
[i.6] ETSI EN 305 200-3-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 3: ICT sites; Sub-part 1: DCEM".
[i.7] ETSI EN 305 200-4-4: "Integrated broadband cable telecommunication networks (CABLE);
Energy management; Operational infrastructures; Global KPIs; Part 4: Design assessments;
Sub-part 4: Cable access networks".
[i.8] ISO 50001: "Energy management systems - Requirements with guidance for use".
[i.9] ISO Guide 82: "Guide for addressing sustainability in standards".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
access network: functional elements (that is equipment and infrastructure) that enable communication between an
operator site (OS) and a customer network
cable access network: access network provided by cable operators comprising optical fibre and metallic cabling
providing direct connection to customer premises
energy consumption: total consumption of energy by an operational infrastructure
energy management: combination of reduced energy consumption and increased task effectiveness, re-use of energy
and use of renewable energy
energy re-use: transfer or conversion of energy (typically in the form of heat) produced by the operational
infrastructure to do other work
ETSI

---------------------- Page: 8 ----------------------
9 ETSI EN 305 200-1 V1.1.1 (2018-07)
fixed (broadband) access network: access network provided by telecommunications operators comprising optical
fibre and metallic cabling providing direct connection to customer premises
global KPI: KPI, combining two or more Objective KPIs, which reflects the overall energy management performance
of an operational infrastructure
ICT equipment: equipment providing data storage, processing and transport services
NOTE: A combination of Information Technology Equipment and Network Telecommunications Equipment.
ICT equipment load: total requirement for power by a set of information technology equipment (ITE) and/or network
telecommunications equipment (NTE)
ICT site: site containing structures or group of structures dedicated to the accommodation, interconnection and
operation of ICT equipment together with all the facilities and infrastructures for power distribution and environmental
control together with the necessary levels of resilience and security required to provide the desired service availability
Information Technology Equipment (ITE): equipment providing data storage, processing and transport services for
subsequent distribution by network telecommunications equipment (NTE)
mobile access network: telecommunications network in which the access to the network (connection between user
equipment and network) is implemented over the air interface
Network Telecommunications Equipment (NTE): equipment between the boundaries of, and dedicated to providing
connection to, core and/or access networks
objective KPI: KPI assessing one of the objectives of operational energy performance which is subsequently used to
define a Global KPI for energy management
operational infrastructure: combination of ICT equipment together with the power supply and environmental control
systems necessary to ensure provision of service
renewable energy: energy produced from dedicated generation systems using resources that are naturally replenished
and for which the energy required for production does not exceed 10 % of the energy produced
NOTE: Directive 2010/31/EU [i.1] defines "energy from renewable sources" as energy from renewable non-fossil
sources, namely wind, solar, aerothermal, geothermal, hydrothermal and ocean energy, hydropower,
biomass, landfill gas, sewage treatment plant gas and biogases.
task effectiveness: measure of the work done (as a result of design and/or operational procedures) for a given amount
of energy consumed
3.2 Symbols
For the purposes of the present document, the following symbols apply:
Δt the maximum time variation between measurement points of the different Objective
KPIs within a given Global KPI
k  assessment period index
KPI  Objective KPI of energy consumption
EC
KPI Global KPI of energy management
Global_Energy_Management
KPI  Objective KPI of renewable energy usage
REN
KPI  Objective KPI of energy re-use
REUSE
KPI  Objective KPI of task effectiveness
TE
T   period of time over which Objective KPIs are assessed
KPI
T the time between which the Objective and Global KPIs are assessed to determine
REPEAT
relevant trend information
W  weighting factor applied to KPI
EC EC
W  weighting factor within KPI
L REUSE
W  weighting factor applied to KPI
REN REN
W  weighting factor applied to KPI
REUSE REUSE
W  weighting factor applied to KPI
TE TE
ETSI

---------------------- Page: 9 ----------------------
10 ETSI EN 305 200-1 V1.1.1 (2018-07)
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
DCEM Data processing and Communications Energy Management
ICT Information and Communications Technology
ISO International Organization for Standardization
ITE Information Technology Equipment
KPI Key Performance Indicator
NTE Network Telecommunications Equipment
4 Context for Key Performance Indicators (KPI)
4.1 Energy management and sustainability concepts
ISO Guide 82 [i.9], entitled "Guide for addressing sustainability in standards", defines sustainability as "state of the
global system, which includes environmental, social and economic subsystems, in which the needs of the present are
met without compromising the ability of future generations to meet their own needs".
The standards in the ETSI EN 305 200 series [i.2] do not specifically address any social and economic aspects of
sustainability but do focus on the environmental issues in relation to the operational performance of infrastructures of
deployed broadband.
The standards in the ETSI EN 305 200 series [i.2] adopt the position that the environmental viability aspects of
sustainability addressing those elements that relate directly to energy consumption and its outcomes within the locale of
the broadband deployment infrastructures are within scope.
Other aspects such as environmental elements relating to the wider impact of power generation (e.g. greenhouse gas,
carbon), consumption of other resources (e.g. water), and issues such as life cycle assessment are out of scope.
While it is self-evident that if less energy is consumed by an operational infrastructure then the environmental impact of
that infrastructure will be reduced, it is equally important to consider:
• the task effectiveness of the operation for which that energy is consumed;
• while not wishing to encourage poor task effectiveness, some benefit can be seen if waste energy, typically in
the form of heat, is re-used. This may substitute for, to some degree, energy from other sources.
Energy consumption, task effectiveness, re-use of waste heat and the contribution of locally generated energy from
renewable sources are considered to work in concert, albeit to different degrees for different infrastructures. In the ETSI
EN 305 200 series [i.2], these four aspects are considered and specified as Objective KPIs from which Global KPIs are
produced (see clause 4.2) which reflect energy management of operational systems - meeting the needs of operators and
legislators alike.
The imperatives placed on the different elements may vary from time to time - regulators specifically encouraging local
generation of energy from renewable sources but then shifting focus on to other areas.
4.2 Differentiation of Key Performance Indicators
4.2.1 General
It is common for equipment suppliers to define the energy efficiency of their products in terms of either:
• the energy consumed to perform specific tasks; or
• task performance improvements for a given energy consumption.
Within the ETSI EN 305 200 series [i.2], these are considered, separately, as improvements in "energy consumption"
and "task effectiveness" respectively.
ETSI

---------------------- Page: 10 ----------------------
11 ETSI EN 305 200-1 V1.1.1 (2018-07)
By comparison, operators and legislators are more interested in the performance of complete systems at an operational
level taking into account global management aspects. As a result they apply a wider view of energy management that
combines energy consumption and task effectiveness with more general objectives.
Against this background, the standards in the ETSI EN 305 200 series [i.2] recognize and differentiate between three
types of energy-related KPIs as shown schematically in Figure 1. Operational Global and Objective KPIs are
fundamentally different to the Technical KPIs applied to products and systems at the design and engineering stages. The
former are used to monitor and drive user behaviour whereas the latter are substantial indications of potential
operational performance.
It is therefore important to support, but differentiate, the role of the Technical KPIs from the Objective and Global
operational KPIs.
DESIGN AND
SYSTEM OPERATION
ENGINEERING
TECHNICAL KPI OBJECTIVE KPI GLOBAL KPI
Components
Energy Energy
Sub-assemblies consumption consumption
TECHNICAL KPI OBJECTIVE KPI
Products
Task efficiency Task effectiveness
Systems
Energy
OBJECTIVE KPI
management
Energy
re-use
OBJECTIVE KPI
Renewable
contribution

Figure 1: The relationship of energy related Technical, Objective and Global KPIs
Technical KPIs relate to the design and engineering phase for the components, sub-assemblies, products and syst
...

Draft ETSI EN 305 200-1 V1.1.0 (2018-04)






EUROPEAN STANDARD
Access, Terminals, Transmission and Multiplexing (ATTM);
Energy management;
Operational infrastructures;
Global KPIs;
Part 1: General requirements

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 305 200-1 V1.1.0 (2018-04)



Reference
DEN/ATTM-003
Keywords
broadband, energy management, ICT,
sustainability
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 305 200-1 V1.1.0 (2018-04)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 9
3.3 Abbreviations . 10
4 Context for Key Performance Indicators (KPI). 10
4.1 Energy management and sustainability concepts . 10
4.2 Differentiation of Key Performance Indicators . 10
4.2.1 General . 10
4.2.2 Technical KPIs . 11
4.2.3 Objective KPIs . 12
4.2.3.1 General . 12
4.2.3.2 Energy consumption within ETSI EN 305 200 series . 12
4.2.3.3 Task effectiveness within ETSI EN 305 200 series . 12
4.2.3.4 Energy re-use within ETSI EN 305 200 series . 13
4.2.3.5 Renewable energy within ETSI EN 305 200 series . 13
4.2.4 Global KPIs . 13
4.2.4.1 General . 13
4.2.4.2 Global KPIs within ETSI EN 305 200 series . 13
5 Requirements for Global and Objective KPIs . 14
5.1 General . 14
5.2 Scale . 14
5.3 Utilization and evolution . 15
5.4 Definition of boundaries . 15
5.5 Formulae. 15
5.5.1 General . 15
5.5.2 Definition of terms . 15
5.5.3 Clarity . 15
5.5.4 Criteria . 15
5.6 Measurement points and procedures . 15
5.6.1 Overview . 15
5.6.2 Detailed treatment . 16
5.7 Classifications . 17
5.8 Reporting . 17
6 The use of KPIs . 17
History . 19

ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 305 200-1 V1.1.0 (2018-04)
List of figures
Figure 1: The relationship of energy related Technical, Objective and Global KPIs .11
Figure 2: Schematic of the foundations of any Global KPI for energy management .14
Figure 3: Schematic of combinations of Objective KPIs within a Global KPI for energy management .14
Figure 4: Schematic showing application of T , T and Δt .16
KPI REPEAT
Figure 5: Mathematical treatment of assessment timing .17


ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 305 200-1 V1.1.0 (2018-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Access, Terminals, Transmission
and Multiplexing (ATTM), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI
standards EN Approval Procedure.
The present document is part 1 of a multi-part deliverable covering Global Key Performance Indicators for energy
management of operational broadband deployment infrastructures, as identified below:
Part 1: "General requirements";
Part 2: "Specific requirements";
Part 3: "ICT sites";
Part 4: "Design assessments".

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa

ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 305 200-1 V1.1.0 (2018-04)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
Energy costs continue to rise, a trend that will continue in the future, while broadband penetration is introducing new
active equipment to the network architecture. In this context, and to reflect other environmental aspects of
sustainability, it is vital that the main telecommunication operators implement effective general engineering of fixed
and mobile broadband networks and sites provisioning, managing or using those networks (i.e. ICT sites) in order to
respond to critical issues of energy consumption while proposing essential solutions to broadband deployment. To guide
this process, it is essential that metrics are defined, termed Global Key Performance Indicators (KPIs), that enable
energy usage to be managed more effectively.
The Global Key Performance Indicators specified in the standards in the ETSI EN 305 200 series [i.2] address
operational infrastructures and do not consider design or operation of individual components comprising those
infrastructures.
The ETSI EN 305 200 [i.2] multi-part deliverable comprises:
• The present document: a generic requirements document addressing Global KPIs for operational
infrastructures.
• A sub-series ETSI EN 305 200-2 that defines the Global KPIs, and drives energy management targets, for
specific operational networks and sites and which describes how the Global KPIs are to be applied (which may
be used to support future regulatory objectives):
- ETSI EN 305 200-2-1 [i.3]: "ICT sites";
- ETSI EN 305 200-2-2 [i.4]: "Fixed broadband access networks";
NOTE: Excluding cable access networks.
- ETSI EN 305 200-2-3 [i.5]: "Mobile broadband access networks".
The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain
information on values that have been used by certain organizations.
• A sub-series ETSI EN 305 200-3 including ETSI EN 305 200-3-1 [i.6] that defines particular implementations
of Global KPIs within ICT sites based on the requirements of ETSI EN 305 200-2-1 [i.3], and which may
define levels of performance to simplify and provide clearer understanding of Global KPIs allowing the
evaluation of performance of energy use management in ICT sites.
The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain
information on values that have been used by certain organizations.
• A sub-series ETSI EN 305 200-4 including ETSI EN 305 200-4-4 [i.7] that defines design assessments of
Global KPIs, and drives energy management targets, for specific operational networks and sites and which
describes how the Global KPIs are to be applied (which may be used to support future regulatory objectives).
These standards may be considered to be a contribution to the application of ISO 50001 [i.8] in relation to the
development of policy for the continuous improvement of energy management and will accelerate:
• the availability of operational infrastructure architectures and network implementations that use energy more
efficiently;
• the definition and attainment objectives for other environmental aspects of sustainability for operational
broadband networks.
ETSI

---------------------- Page: 6 ----------------------
7 Draft ETSI EN 305 200-1 V1.1.0 (2018-04)
1 Scope
The present document describes the energy management landscape of the operational infrastructures of broadband
deployment addressed by this multi-part deliverable, their inter-relationship and boundaries.
It specifies the following aspects for Global Key Performance Indicators in relation to energy management for the
operational infrastructures of broadband deployment:
• common objectives in relation to energy consumption:
- energy consumption;
- task effectiveness;
- energy re-use;
- renewable energy;
• general requirements for all KPIs specified in the other standards in the ETSI EN 305 200 series [i.2] in
relation to:
- infrastructure scalability;
- infrastructure evolution;
- formulae and definition of terms;
- measurement points and procedures;
• the use of KPIs.
The environmental impact and management of different energy sources are outside the scope of the present document.
Within the present document:
• clause 4 explains the context underlying the need for the development of Global KPIs for energy efficiency
and introduces the Objective KPIs upon which the Global KPIs are founded;
• clause 5 specifies the general requirements that are applied to all KPIs defined within the standards in the ETSI
EN 305 200-2 series and ETSI EN 305 200-3 series;
• clause 6 summarizes the applicability of the Global and Objective KPIs defined within the standards in the
ETSI EN 305 200-2 series and ETSI EN 305 200-3 series.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
ETSI

---------------------- Page: 7 ----------------------
8 Draft ETSI EN 305 200-1 V1.1.0 (2018-04)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the
energy performance of buildings.
[i.2] ETSI EN 305 200 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs".
[i.3] ETSI EN 305 200-2-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements;
Sub-part 1: ICT Sites".
[i.4] ETSI EN 305 200-2-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements;
Sub-part 2: Fixed broadband access networks".
[i.5] ETSI EN 305 200-2-3: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements;
Sub-part 3: Mobile broadband access networks".
[i.6] ETSI EN 305 200-3-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 3: ICT sites; Sub-part 1: DCEM".
[i.7] ETSI EN 305 200-4-4: "Integrated broadband cable telecommunication networks (CABLE);
Energy management; Operational infrastructures; Global KPIs; Part 4: Design assessments;
Sub-part 4: Cable access networks".
[i.8] ISO 50001: "Energy management systems - Requirements with guidance for use".
[i.9] ISO Guide 82: "Guide for addressing sustainability in standards".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
access network: functional elements (that is equipment and infrastructure) that enable communication between an
operator site (OS) and a customer network
cable access network: access network provided by cable operators comprising optical fibre and metallic cabling
providing direct connection to customer premises
energy consumption: total consumption of energy by an operational infrastructure
energy management: combination of reduced energy consumption and increased task effectiveness, re-use of energy
and use of renewable energy
energy re-use: transfer or conversion of energy (typically in the form of heat) produced by the operational
infrastructure to do other work
ETSI

---------------------- Page: 8 ----------------------
9 Draft ETSI EN 305 200-1 V1.1.0 (2018-04)
fixed (broadband) access network: access network provided by telecommunications operators comprising optical
fibre and metallic cabling providing direct connection to customer premises
global KPI: KPI, combining two or more Objective KPIs, which reflects the overall energy management performance
of an operational infrastructure
ICT equipment: equipment providing data storage, processing and transport services
NOTE: A combination of Information Technology Equipment and Network Telecommunications Equipment.
ICT equipment load: total requirement for power by a set of information technology equipment (ITE) and/or network
telecommunications equipment (NTE)
ICT site: site containing structures or group of structures dedicated to the accommodation, interconnection and
operation of ICT equipment together with all the facilities and infrastructures for power distribution and environmental
control together with the necessary levels of resilience and security required to provide the desired service availability
Information Technology Equipment (ITE): equipment providing data storage, processing and transport services for
subsequent distribution by network telecommunications equipment (NTE)
mobile access network: telecommunications network in which the access to the network (connection between user
equipment and network) is implemented over the air interface
Network Telecommunications Equipment (NTE): equipment between the boundaries of, and dedicated to providing
connection to, core and/or access networks
objective KPI: KPI assessing one of the objectives of operational energy performance which is subsequently used to
define a Global KPI for energy management
operational infrastructure: combination of ICT equipment together with the power supply and environmental control
systems necessary to ensure provision of service
renewable energy: energy produced from dedicated generation systems using resources that are naturally replenished
and for which the energy required for production does not exceed 10 % of the energy produced
NOTE: Directive 2010/31/EU [i.1] defines "energy from renewable sources" as energy from renewable non-fossil
sources, namely wind, solar, aerothermal, geothermal, hydrothermal and ocean energy, hydropower,
biomass, landfill gas, sewage treatment plant gas and biogases.
task effectiveness: measure of the work done (as a result of design and/or operational procedures) for a given amount
of energy consumed
3.2 Symbols
For the purposes of the present document, the following symbols apply:
Δt the maximum time variation between measurement points of the different Objective
KPIs within a given Global KPI
k  assessment period index
KPI  Objective KPI of energy consumption
EC
KPI Global KPI of energy management
Global_Energy_Management
  Objective KPI of renewable energy usage
KPIREN
KPI  Objective KPI of energy re-use
REUSE
KPITE  Objective KPI of task effectiveness
T   period of time over which Objective KPIs are assessed
KPI
T the time between which the Objective and Global KPIs are assessed to determine
REPEAT
relevant trend information
  weighting factor applied to KPI
WEC EC
W  weighting factor within KPI
L REUSE
WREN  weighting factor applied to KPIREN
W  weighting factor applied to KPI
REUSE REUSE
W  weighting factor applied to KPI
TE TE
ETSI

---------------------- Page: 9 ----------------------
10 Draft ETSI EN 305 200-1 V1.1.0 (2018-04)
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
DCEM Data processing and Communications Energy Management
ICT Information and Communications Technology
ISO International Organization for Standardization
ITE Information Technology Equipment
KPI Key Performance Indicator
NTE Network Telecommunications Equipment
4 Context for Key Performance Indicators (KPI)
4.1 Energy management and sustainability concepts
ISO Guide 82 [i.9], entitled "Guide for addressing sustainability in standards", defines sustainability as "state of the
global system, which includes environmental, social and economic subsystems, in which the needs of the present are
met without compromising the ability of future generations to meet their own needs".
The standards in the ETSI EN 305 200 series [i.2] do not specifically address any social and economic aspects of
sustainability but do focus on the environmental issues in relation to the operational performance of infrastructures of
deployed broadband.
The standards in the ETSI EN 305 200 series [i.2] adopt the position that the environmental viability aspects of
sustainability addressing those elements that relate directly to energy consumption and its outcomes within the locale of
the broadband deployment infrastructures are within scope.
Other aspects such as environmental elements relating to the wider impact of power generation (e.g. greenhouse gas,
carbon), consumption of other resources (e.g. water), and issues such as life cycle assessment are out of scope.
While it is self-evident that if less energy is consumed by an operational infrastructure then the environmental impact of
that infrastructure will be reduced, it is equally important to consider:
• the task effectiveness of the operation for which that energy is consumed;
• while not wishing to encourage poor task effectiveness, some benefit can be seen if waste energy, typically in
the form of heat, is re-used. This may substitute for, to some degree, energy from other sources.
Energy consumption, task effectiveness, re-use of waste heat and the contribution of locally generated energy from
renewable sources are considered to work in concert, albeit to different degrees for different infrastructures. In the ETSI
EN 305 200 series [i.2], these four aspects are considered and specified as Objective KPIs from which Global KPIs are
produced (see clause 4.2) which reflect energy management of operational systems - meeting the needs of operators and
legislators alike.
The imperatives placed on the different elements may vary from time to time - regulators specifically encouraging local
generation of energy from renewable sources but then shifting focus on to other areas.
4.2 Differentiation of Key Performance Indicators
4.2.1 General
It is common for equipment suppliers to define the energy efficiency of their products in terms of either:
• the energy consumed to perform specific tasks; or
• task performance improvements for a given energy consumption.
Within the ETSI EN 305 200 series [i.2], these are considered, separately, as improvements in "energy consumption"
and "task effectiveness" respectively.
ETSI

---------------------- Page: 10 ----------------------
11 Draft ETSI EN 305 200-1 V1.1.0 (2018-04)
By comparison, operators and legislators are more interested in the performance of complete systems at an operational
level taking into account global management aspects. As a result they apply a wider view of energy management that
combines energy consumption and task effectiveness with more general objectives.
Against this background, the standards in the ETSI EN 305 200 series [i.2] recognize and differentiate between three
types of energy-related KPIs as shown schematically in Figure 1. Operational Global and Objective KPIs are
fundamentally different to the Technical KPIs applied to products and systems at the design and engineering stages. The
former are used to monitor and drive user behaviour whereas the latter are substantial indications of potential
operational performance.
It is therefore important to support, but differentiate, the role of the Technical KPIs from the Objective and Global
operational KPIs.
DESIGN AND
SYSTEM OPERATION
ENGINEERING
TECHNICAL KPI OBJECTIVE KPI GLOBAL KPI
Components
Energy Energy
Sub-assemblies consumption consumption
TECHNICAL KPI OBJECTIVE KPI
Products
Task efficiency Task effectiveness
Systems
Energy
OBJECTIVE KPI
management
Energy
re-use
OBJECTIVE KPI
Renewable
contribution

Figure 1:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.