ETSI TS 138 101-1 V15.18.0 (2022-07)

5G ; NR; User Equipment (UE) radio transmission and reception; Part 1: Range 1 Standalone (3GPP TS 38.101-1 version 15.18.0 Release 15)

RTS/TSGR-0438101-1vfi0

General Information

• Status: Not Published
• Technical Committee: 3GPP RAN 4 - Specification for radio performance
• Current Stage: 12 - Citation in the OJ (auto-insert)
• Completion Date: 08-Jul-2022

Standards Content (Sample)

ETSI TS 138 101-1 V15.18.0 (2022-07)






TECHNICAL SPECIFICATION
5G ;
NR;
User Equipment (UE) radio transmission and reception;
Part 1: Range 1 Standalone
(3GPP TS 38.101-1 version 15.18.0 Release 15)

---------------------- Page: 1 ----------------------
3GPP TS 38.101-1 version 15.18.0 Release 15 1 ETSI TS 138 101-1 V15.18.0 (2022-07)

Reference
RTS/TSGR-0438101-1vfi0
Keywords
5G
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2022.
All rights reserved.

ETSI

---------------------- Page: 2 ----------------------
3GPP TS 38.101-1 version 15.18.0 Release 15 2 ETSI TS 138 101-1 V15.18.0 (2022-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Legal Notice
This Technical Specification (TS) has been produced by the ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities. These shall be
interpreted as being references to the corresponding ETSI deliverables.
The cross reference between 3GPP and ETSI identities can be found under http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI

---------------------- Page: 3 ----------------------
3GPP TS 38.101-1 version 15.18.0 Release 15 3 ETSI TS 138 101-1 V15.18.0 (2022-07)
Contents
Intellectual Property Rights . 2
Legal Notice . 2
Modal verbs terminology . 2
Foreword . 11
1 Scope . 12
2 References . 12
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Symbols . 13
3.3 Abbreviations . 15
4 General . 16
4.1 Relationship between minimum requirements and test requirements . 16
4.2 Applicability of minimum requirements . 16
4.3 Specification suffix information . 16
5 Operating bands and channel arrangement . 17
5.1 General . 17
5.2 Operating bands . 17
5.2A Operating bands for CA . 18
5.2A.1 Intra-band CA . 18
5.2A.2 Inter-band CA . 19
5.2A.2.1 Inter-band CA (two bands) . 19
5.2B Void . 19
5.2C Operating band combination for SUL . 19
5.3 UE channel bandwidth . 20
5.3.1 General . 20
5.3.2 Maximum transmission bandwidth configuration . 21
5.3.3 Minimum guardband and transmission bandwidth configuration . 21
5.3.4 RB alignment . 22
5.3.5 UE channel bandwidth per operating band . 22
5.3.6 Asymmetric channel bandwidths . 24
5.3A UE channel bandwidth for CA . 25
5.3A.1 General . 25
5.3A.2 Maximum transmission bandwidth configuration for CA . 25
5.3A.3 Minimum guardband and transmission bandwidth configuration for CA . 25
5.3A.4 Void . 27
5.3A.5 UE channel bandwidth per operating band for CA . 27
5.4 Channel arrangement . 27
5.4.1 Channel spacing . 27
5.4.1.1 Channel spacing for adjacent NR carriers . 27
5.4.2 Channel raster . 28
5.4.2.1 NR-ARFCN and channel raster. 28
5.4.2.2 Channel raster to resource element mapping. 28
5.4.2.3 Channel raster entries for each operating band . 29
5.4.3 Synchronization raster . 30
5.4.3.1 Synchronization raster and numbering . 30
5.4.3.2 Synchronization raster to synchronization block resource element mapping . 31
5.4.3.3 Synchronization raster entries for each operating band. 31
5.4.4 TX–RX frequency separation . 32
5.4A Channel arrangement for CA. 33
5.4A.1 Channel spacing for CA . 33
5.4A.2 Channel raster for CA . 33
5.4A.3 Synchronization raster for CA . 34
5.4A.4 Tx-Rx frequency separation for CA. 34
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 38.101-1 version 15.18.0 Release 15 4 ETSI TS 138 101-1 V15.18.0 (2022-07)
5.5 Void . 34
5.5A Configurations for CA . 34
5.5A.1 Configurations for intra-band contiguous CA. 34
5.5A.2 Void . 35
5.5A.3 Configurations for inter-band CA . 35
5.5A.3.1 Configurations for inter-band CA (two bands) . 35
5.5B Void . 38
5.5C Configurations for SUL . 38
6 Transmitter characteristics . 39
6.1 General . 39
6.2 Transmitter power . 39
6.2.1 UE maximum output power . 39
6.2.2 UE maximum output power reduction . 40
6.2.3 UE additional maximum output power reduction . 41
6.2.3.1 General . 41
6.2.3.2 A-MPR for NS_04 . 45
6.2.3.3 A-MPR for NS_10 . 46
6.2.3.4 A-MPR for NS_05 and NS_05U . 47
6.2.3.5 A-MPR for NS_40 . 49
6.2.3.6 A-MPR for NS_43 and NS_43U . 49
6.2.3.7 A-MPR for NS_03 and NS_03U . 50
6.2.3.8 A-MPR for NS_37 . 50
6.2.3.9 A-MPR for NS_38 . 51
6.2.3.10 A-MPR for NS_39 . 51
6.2.3.11 A-MPR for NS_41 . 52
6.2.3.12 A-MPR for NS_42 . 52
6.2.3.13 A-MPR for NS_18 . 53
6.2.4 Configured transmitted power . 54
6.2A Transmitter power for CA . 56
6.2A.1 UE maximum output power for CA . 56
6.2A.1.1 Void. 56
6.2A.1.2 Void. 56
6.2A.1.3 UE maximum output power for Inter-band CA . 56
6.2A.2 UE maximum output power reduction for CA . 56
6.2A.2.1 Void. 56
6.2A.2.2 Void. 56
6.2A.2.3 UE maximum output power reduction for Inter-band CA . 56
6.2A.3 UE additional maximum output power reduction for CA . 56
6.2A.3.1.1 Void . 56
6.2A.3.1.2 Void . 56
6.2A.3.1.3 UE additional maximum output power reduction for Inter-band CA . 56
6.2A.4 Configured output power for CA . 57
6.2A.4.1 Configured transmitted power level . 57
6.2A.4.1.1 Void . 57
6.2A.4.1.2 Void . 57
6.2A.4.1.3 Configured transmitted power for Inter-band CA . 57
6.2A.4.2 ΔT for CA . 59
IB,c
6.2A.4.2.1 Void . 60
6.2A.4.2.2 Void . 60
6.2A.4.2.3 ΔTIB,c for Inter-band CA (two bands) . 60
6.2B Void . 60
6.2C Transmitter power for SUL . 60
6.2C.1 Configured transmitted power for SUL . 60
6.2C.2 ΔT . 60
IB,c
6.2D Transmitter power for UL MIMO . 61
6.2D.1 UE maximum output power for UL MIMO . 61
6.2D.2 UE maximum output power reduction for UL MIMO . 61
6.2D.3 UE additional maximum output power reduction for UL MIMO . 62
6.2D.4 Configured transmitted power for UL MIMO . 62
6.3 Output power dynamics . 63
6.3.1 Minimum output power . 63
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 38.101-1 version 15.18.0 Release 15 5 ETSI TS 138 101-1 V15.18.0 (2022-07)
6.3.2 Transmit OFF power . 63
6.3.3 Transmit ON/OFF time mask . 63
6.3.3.1 General . 63
6.3.3.2 General ON/OFF time mask . 64
6.3.3.3 Transmit power time mask for slot and short or long subslot boundaries . 64
6.3.3.4 PRACH time mask . 64
6.3.3.5 Void. 65
6.3.3.6 SRS time mask . 65
6.3.3.7 PUSCH-PUCCH and PUSCH-SRS time masks . 67
6.3.3.8 Transmit power time mask for consecutive slot or long subslot transmission and short subslot
transmission boundaries . 68
6.3.3.9 Transmit power time mask for consecutive short subslot transmissions boundaries . 68
6.3.4 Power control . 69
6.3.4.1 General . 69
6.3.4.2 Absolute power tolerance . 69
6.3.4.3 Relative power tolerance . 69
6.3.4.4 Aggregate power tolerance. 70
6.3A Output power dynamics for CA . 70
6.3A.1 Minimum output power for CA . 70
6.3A.1.1 Void. 70
6.3A.1.2 Void. 70
6.3A.1.3 Minimum output power for inter-band CA . 70
6.3A.2 Transmit OFF power for CA. 71
6.3A.2.1 Void. 71
6.3A.2.2 Void. 71
6.3A.2.3 Transmit OFF power for inter-band CA. 71
6.3A.3 Transmit ON/OFF time mask for CA . 71
6.3A.3.1 Void. 71
6.3A.3.2 Void. 71
6.3A.3.3 Transmit ON/OFF time mask for inter-band CA . 71
6.3A.4 Power control for CA . 71
6.3A.4.1 Void. 71
6.3A.4.2 Void. 71
6.3A.4.3 Power control for inter-band CA .
...