ETSI TS 103 834-2 V17.0.0 (2022-12)

Smart Secure Platform (SSP); Part 2: Test Specification, SSP Test Tool Interface (Release 17)

DTS/SET-00103834-2vh00

General Information

• Status: Not Published
• Technical Committee: SET TEST - SET TEST
• Current Stage: 12 - Citation in the OJ (auto-insert)
• Due Date: 06-Jan-2023
• Completion Date: 21-Dec-2022

Standards Content (Sample)

ETSI TS 103 834-2 V17.0.0 (2022-12)






TECHNICAL SPECIFICATION
Smart Secure Platform (SSP);
Part 2: Test Specification, SSP Test Tool Interface
(Release 17)

---------------------- Page: 1 ----------------------
Release 17 2 ETSI TS 103 834-2 V17.0.0 (2022-12)

Reference
DTS/SET-00103834-2vh00
Keywords
SCL, SSP, test tool interface, testing

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
and/or governmental
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2022.
All rights reserved.

ETSI

---------------------- Page: 2 ----------------------
Release 17 3 ETSI TS 103 834-2 V17.0.0 (2022-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definition of terms, symbols, abbreviations and formats . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
3.4 Formats . 9
3.4.1 Format of the requirements tables . 9
3.4.2 Numbers and Strings . 9
3.4.3 Format of test description clauses . 9
3.4.4 Dynamic content validation in ASN.1 structure . 12
4 Requirements for the TTI . 12
4.0 Introduction . 12
4.1 Requirements from ETSI TS 103 666-1 . 13
4.1.1 Accessor authentication . 13
4.1.2 Protocol layers . 13
4.2 Requirements from ETSI TS 103 666-2 . 14
4.2.1 Runtime model . 14
4.3 Requirements from ETSI TS 103 999-1 . 14
4.3.1 Test Tool Interface requirements . 14
4.4 Requirements from GlobalPlatform - Virtual Primary Platform . 14
4.4.1 FFS. 14
4.5 Requirements from ETSI TS 103 834-1 . 15
4.5.1 TTI MQTT requirements . 15
4.5.2 TTI Accessor Authentication Service requirements . 15
4.5.3 TTI Control Service requirements . 15
4.5.4 TTI Data Service requirements . 16
4.5.5 RDE Data Service requirements . 16
4.6 ASN.1 syntax . 16
4.6.1 Introduction. 16
4.6.2 Start of ASN.1 . 16
5 Test descriptions for TTI implementations . 17
5.1 Test descriptions on ETSI TS 103 666-1 requirements . 17
5.1.1 Accessor authentication . 17
5.1.2 Protocol layers . 17
5.2 Test descriptions on ETSI TS 103 666-2 requirements . 17
5.3 Test descriptions on ETSI TS 103 999-1 requirements . 17
5.4 Test descriptions on GP Virtual Primary Platform requirements . 17
5.5 Test descriptions on ETSI TS 103 834-1 requirements . 18
5.5.1 TTI underlayers . 18
5.5.1.1 Configurations . 18
5.5.1.1.1 CTMQ_001 . 18
5.5.1.2 Procedures . 18
5.5.1.3 Test Descriptions . 19
5.5.1.3.1 TMQ_001 - TTI_UL client/server connection . 19
5.5.2 TTI Accessor Authentication Service . 19
5.5.2.1 Configurations . 19
5.5.2.2 Procedures . 19
5.5.2.3 Test Descriptions . 19
ETSI

---------------------- Page: 3 ----------------------
Release 17 4 ETSI TS 103 834-2 V17.0.0 (2022-12)
5.5.3 TTI Control Service . 20
5.5.3.1 Configurations . 20
5.5.3.1.1 CTCS_001 . 20
5.5.3.1.2 CTCS_002 . 20
5.5.3.1.3 CTCS_003 . 21
5.5.3.1.4 ASN.1 Configuration . 21
5.5.3.2 Procedures . 23
5.5.3.2.1 PTCS_001 - Open a pipe session with the Identity gate . 23
5.5.3.2.2 PTCS_002 - Open a pipe session with the Accessor Authentication Service . 24
5.5.3.2.3 PTCS_003 - Authentication of the root accessor . 25
5.5.3.2.4 PTCS_004 - Access to the Authentication Service from the root accessor . 26
5.5.3.2.5 PTCS_005 - Open a pipe session with the Accessor Authentication Service (ROOT) . 27
5.5.3.2.6 PTCS_006 - Creation of an accessor TTI Control Service Accessor (TTI1) . 28
5.5.3.2.7 PTCS_007 - Open a pipe session with the Accessor Authentication Service for the TTI

Control Service Accessor (TTI1). 29
5.5.3.2.8 PTCS_008 - Authentication of the accessor (TTI1) . 29
5.5.3.2.9 PTCS_009 - Access to TTI Control Service with secure pipe (TTI1) . 30
5.5.3.2.10 PTCS_010 - Open a secure pipe session with the TTI Control Service for the TTI1 accessor . 30
5.5.3.2.11 PTCS_011 - Access to TTI Control Service with secure pipe (ROOT) . 31
5.5.3.2.12 PTCS_012 - Open a secure pipe session with the TTI Control Service for the root accessor . 31
5.5.3.3 Test Descriptions . 32
5.5.3.3.1 TTI-OP-GET-CAPABILITIES . 32
5.5.3.3.2 TTI-ADMIN-IMPERSONATE . 33
5.5.3.3.3 TTI-ADMIN-UPDATE-ACL . 34
5.5.4 TTI Data Service . 37
5.5.4.1 Configurations . 37
5.5.4.1.1 CTDS_001 . 37
5.5.4.2 Procedures . 38
5.5.4.2.1 PTDS_001 - Access to TTI RDE Service for TTI1 with secure pipe . 38
5.5.4.2.2 PTDS_002 - Open a secure pipe session with the TTI Data Service for the TTI1 accessor . 38
5.5.4.3 Test Descriptions . 39
5.5.4.3.1 TDS_001 - Tunnelling of SCL packets . 39
5.5.4.3.2 TDS_002 - Tunnelling of SCL packets . 39
5.5.5 RDE Data Service . 40
5.5.5.1 Configurations . 40
5.5.5.1.1 CRDE_001 . 40
5.5.5.2 Procedures . 40
5.5.5.2.1 PRDE_001 - Creation of an RDE Service gate . 40
5.5.5.2.2 PRDE_0002 - Open RDE data service session . 41
5.5.5.3 Test Descriptions . 41
5.5.5.3.1 RDE_001 - Extract Time Stamp . 41
Annex A (informative): References on ETSI forge . 42
A.1 ETSI forge repository for the TTI test specification . 42
A.2 License information . 42
A.3 ASN.1 coding . 42
Annex B (informative): ASN.1 definition . 43
B.1 End of ASN.1 . 43
Annex C (informative): Core specification version information . 44
Annex D (informative): Change History . 45
History . 46


ETSI

---------------------- Page: 4 ----------------------
Release 17 5 ETSI TS 103 834-2 V17.0.0 (2022-12)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Secure Element Technologies
(SET).
The present document is part 2 of a multi-part deliverable covering the Test Tool Interface (TTI) for the Smart Secure
Platform (SSP). Full details of the entire series can be found in part 1 [1].
The contents of the present document are subject to continuing work within TC SET and may change following formal
TC SET approval. If TC SET modifies the contents of the present document, it will then be republished by ETSI with
an identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
0 early working draft;
1 presented to TC SET for information;
2 presented to TC SET for approval;
3 or greater indicates TC SET approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
ETSI

---------------------- Page: 5 ----------------------
Release 17 6 ETSI TS 103 834-2 V17.0.0 (2022-12)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI

---------------------- Page: 6 ----------------------
Release 17 7 ETSI TS 103 834-2 V17.0.0 (2022-12)
1 Scope
The present document is part of a series of documents specifying the Test Tool Interface (TTI) for the Smart Secure
Platform. The present document is the test specification for the Test Tool Interface (TTI) shown in the test environment
of ETSI TS 103 999-1 [3], testing the implementations in accordance to ETSI TS 103 834-1 [7].
It contains:
• A list of requirements dedicated to the TTI derived from ETSI TS 103 999-1 [3];
• TTI related requirements from ETSI TS 103 834-1 [7];
• TTI related requirements from ETSI TS 103 666-1 [1] and ETSI TS 103 666-2 [2];
• the principle and requirements for testing the SSP Primary Platform (also known as VPP);
• a selection of test cases to verify the implementation of the TTI independently from the respective
manufacturers.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
• In the case of a reference to a TC SET document, a non-specific reference implicitly refers to the latest version
of that document in the same Release as the present document.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI TS 103 666-1: "Smart Secure Platform (SSP); Part 1: General characteristics".
[2] ETSI TS 103 666-2: "Smart Secure Platform (SSP); Part 2: Integrated SSP (iSSP) characteristics".
[3] ETSI TS 103 999-1: "Smart Secure Platform (SSP); Part 1: Test Specification, general
characteristics".
[4] ETSI TS 103 999-2: "Smart Secure Platform (SSP); Part 2: Integrated SSP (iSSP) characteristics
Test Specification".
[5] GlobalPlatform: "Virtual Primary Platform - Network Protocol" Version 2.0.
NOTE: Available at https://globalplatform.org/specs-library/globalplatform-technology-virtual-primary-
platform/.
[6] ETSI TS 102 622: "Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller
Interface (HCI)".
[7] ETSI TS 103 834-1: "Smart Secure Platform (SSP); Part 1: Technical Specification, SSP Test Tool
Interface".
ETSI

---------------------- Page: 7 ----------------------
Release 17 8 ETSI TS 103 834-2 V17.0.0 (2022-12)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
• In the case of a reference to a TC SET document, a non-specific reference implicitly refers to the latest version
of that document in the same Release as the present document.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Recommendation ITU-T X.680: "Information technology - Abstract Syntax Notation One
(ASN.1): Specification of basic notation".
[i.2] Recommendation ITU-T X.690: "Information technology - ASN.1 encoding rules: Specification of
Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding
Rules (DER)".
3 Definition of terms, symbols, abbreviations and
formats
3.1 Terms
For the purposes of the present document, the terms given in ETSI TS 103 666-1 [1] and ETSI TS 103 999-1 [3] apply.
3.2 Symbols
For the purposes of the present document, the symbols given in ETSI TS 103 666-1 [1] and ETSI TS 103 999-1 [3]
apply.
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in ETSI TS 103 666-1 [1], ETSI TS 103 999-1 [3]
and the following apply:
AA Accessor Authentication
FFS For Further Study
RDE Router Data Extractor
TT Test Tool
TTI Tests Tool Interface
ETSI

---------------------- Page: 8 ----------------------
Release 17 9 ETSI TS 103 834-2 V17.0.0 (2022-12)
3.4 Formats
3.4.1 Format of the requirements tables
The columns in the requirement tables in clause 5 have the following meaning.
Column Meaning
Req.ID This column shows the ordinal term assigned to a requirement identified in the referenced
specification. The following syntax has been used to define the unique R(equirement) terms:
R_
n: Identification letter for the referenced specification
Q: ETSI TS 103 666-1 [1]
R: ETSI TS 103 666-2 [2]
S: ETSI TS 103 999-1 [3]
T: GlobalPlatform, Virtual Primary Platform [5]
U: ETSI TS 103 834-1 [7]
XX: Main clause of the core specification in which the requirement is listed.
YY: Subclause of the main clause in the core specification in which the requirement is listed.
ZZZ: Continuously increasing number starting with '001'.
Clause The "Clause" column helps to identify the location of a requirement by listing the clause hierarchy
down to the subclause the requirement is located in.
Release An optional column that is used if the listed requirement is valid for a specific release or a specific
range of releases only, up to a specific release, or from a specific release onwards.
Description In this column the requirement text is shown. Where the text can either be a copy of the original
requirement, or a text analogous to the requirement text (e.g. if the requirement text is descriptive
and can be shortened or truncated).

3.4.2 Numbers and Strings
The conventions used for decimal numbers, binary numbers and strings are listed in table 3.1.
Table 3.1: Convention of Numbering and Strings
Convention Description
nnnnn A decimal number, e.g. PIN value or phone number
'b' A single digit binary number
'bbbbbbbb' An 8-bit binary number
'hh' A single octet hexadecimal number
'hh hh…hh' A multi-octet hexadecimal number or string
"SSSS" A character string
NOTE: If an 'X' is present in a binary or hexadecimal number, then the digit might have any allowed value. This 'X'
value does not need to be interpreted within the particular coding shown.

3.4.3 Format of test description clauses
In general clauses with test descriptions use the following basic format:
X.Y. Group of test descriptions for a particular topic
X.Y.1 Configur
...