ETSI TS 119 182-1 V1.1.1 (2021-03)
Electronic Signatures and Infrastructures (ESI); JAdES digital signatures; Part 1: Building blocks and JAdES baseline signatures
Electronic Signatures and Infrastructures (ESI); JAdES digital signatures; Part 1: Building blocks and JAdES baseline signatures
DTS/ESI-0019182-1
Elektronski podpisi in infrastruktura (ESI) - Digitalni podpisi JAdES - 1. del: Gradniki in izhodiščni podpisi JAdES
General Information
Buy Standard
Standards Content (Sample)
ETSI TS 119 182-1 V1.1.1 (2021-03)
TECHNICAL SPECIFICATION
Electronic Signatures and Infrastructures (ESI);
JAdES digital signatures;
Part 1: Building blocks and JAdES baseline signatures
---------------------- Page: 1 ----------------------
2 ETSI TS 119 182-1 V1.1.1 (2021-03)
Reference
DTS/ESI-0019182-1
Keywords
electronic signature, JSON
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI TS 119 182-1 V1.1.1 (2021-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 7
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definition of terms, symbols, abbreviations and terminology . 10
3.1 Terms . 10
3.2 Symbols . 10
3.3 Abbreviations . 10
3.4 Terminology . 11
4 General Requirements . 12
5 Header parameters semantics and syntax . 13
5.1 Use of header parameters defined in IETF RFC 7515 and IETF RFC 7797 . 13
5.1.1 Introduction. 13
5.1.2 The alg (X.509 URL) header parameter . 13
5.1.3 The cty (content type) header parameter . 13
5.1.4 The kid (key identifier) header parameter . 13
5.1.5 The x5u (X.509 URL) header parameter . 14
5.1.6 The x5t (X.509 Certificate SHA-1 Thumbprint) header parameter . 14
5.1.7 The x5t#S256 (X.509 Certificate SHA-256 Thumbprint) header parameter . 14
5.1.8 The x5c (X.509 Certificate Chain) header parameter . 14
5.1.9 The crit (critical) header parameter . 15
5.1.10 The b64 header parameter . 15
5.2 New signed header parameters . 15
5.2.1 The sigT (claimed signing time) header parameter . 15
5.2.2 Header parameters for certificate references. 16
5.2.2.1 Introduction . 16
5.2.2.2 The x5t#o (X509 certificate digest) header parameter . 16
5.2.2.3 The sigX5ts (X509 certificates digests) header parameter . 16
5.2.3 The srCms (signer commitments) header parameter . 17
5.2.4 The sigPl (signature production place) header parameter . 18
5.2.5 The srAts (signer attributes) header parameter . 18
5.2.6 The adoTst (signed data time-stamp) header parameter . 20
5.2.7 The sigPId (signature policy identifier) header parameter . 21
5.2.7.1 Semantics and syntax . 21
5.2.7.2 Signature policy qualifiers . 22
5.2.8 The sigD header parameter . 23
5.2.8.1 Semantics and Syntax . 23
5.2.8.2 Mechanism HttpHeaders . 24
5.2.8.3 Mechanisms supported by URI references . 25
5.2.8.3.1 General requirements . 25
5.2.8.3.2 Mechanism ObjectIdByURI . 25
5.2.8.3.3 Mechanism ObjectIdByURIHash . 26
5.3 New unsigned header parameter . 26
5.3.1 The etsiU header parameter . 26
5.3.2 The cSig (counter signature) JSON object . 29
5.3.3 The sigPSt JSON object. 29
5.3.4 The sigTst JSON object. 30
ETSI
---------------------- Page: 3 ----------------------
4 ETSI TS 119 182-1 V1.1.1 (2021-03)
5.3.5 JSON objects for validation data values . 30
5.3.5.1 The xVals JSON array . 30
5.3.5.2 The rVals JSON object . 31
5.3.5.3 The axVals JSON array . 32
5.3.5.4 The arVals JSON object . 32
5.3.6 JSON values for long term availability and integrity of validation material . 33
5.3.6.1 The tstVD JSON object . 33
5.3.6.2 The arcTst JSON object . 34
5.3.6.2.1 Semantics and syntax . 34
5.3.6.2.2 Computation of message-imprint . 34
5.4 Generally useful syntax . 36
5.4.1 The oId data type . 36
5.4.2 The pkiOb data type . 37
5.4.3 Container for electronic time-stamps . 37
5.4.3.1 Introduction . 37
5.4.3.2 Containers for electronic time-stamps . 38
5.4.3.3 The tstContainer type . 38
6 JAdES baseline signatures. 39
6.1 Signature levels . 39
6.2 General requirements . 40
6.2.1 Algorithm requirements . 40
6.2.2 Notation for requirements . 40
6.3 Requirements on JAdES components and services . 42
Annex A (normative): Additional components Specification . 47
A.1 Components for validation data . 47
A.1.1 The xRefs JSON array . 47
A.1.2 The rRefs JSON object . 48
A.1.3 The axRefs JSON array . 50
A.1.4 The arRefs JSON object . 51
A.1.5 Time-stamps on references to validation data . 52
A.1.5.1 The sigRTst JSON object . 52
A.1.5.1.1 General . 52
A.1.5.1.2 Computation of the message imprint with Base64url incorporation . 52
A.1.5.1.3 Computation of the message imprint with JSON clear incorporation . 52
A.1.5.2 The rfsTst JSON object. 53
A.1.5.2.1 Semantics and syntax . 53
A.1.5.2.2 Computation of the message imprint with Base64url incorporation . 53
A.1.5.2.3 Computation of the message imprint with clear JSON incorporation . 53
Annex B (normative): JSON Schema files . 54
B.1 JSON Schema files location for JAdES components . 54
Annex C (informative): Correspondence between XAdES tags and JAdES tags. 55
C.1 Correspondence between XAdES qualifying properties tags and JAdES component tags . 55
Annex D (normative): Alternative mechanisms for long term availability and integrity of
validation data . 56
Annex E (normative): Digest algorithms identifiers for JAdES signatures. 57
Annex F (informative): Change History . 58
History . 59
ETSI
---------------------- Page: 4 ----------------------
5 ETSI TS 119 182-1 V1.1.1 (2021-03)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 1 of a multi-part deliverable covering JAdES digital signatures, as identified below:
Part 1: "Building blocks and JAdES baseline signatures";
Part 2: "Extended JAdES signatures".
One JSON schema file, whose location is detailed in clause B.1 and which contain JSON Schema definitions
complements the present document.
The present document has taken as starting point the paper [i.18] "Bringing JSON signatures to ETSI AdES framework:
meet JAdES signatures", by Juan Carlos Cruellas, in Computer Standards and Interfaces, Volume 71, August 2020.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
Electronic commerce has emerged as a frequent way of doing business between companies across local, wide area and
global networks. Trust in this way of doing business is essential for the success and continued development of
electronic commerce. It is therefore important that companies using this electronic means of doing business have
suitable security controls and mechanisms in place to protect their transactions and to ensure trust and confidence with
their business partners. In this respect digital signatures are an important security component that can be used to protect
information and provide trust in electronic business.
ETSI
---------------------- Page: 5 ----------------------
6 ETSI TS 119 182-1 V1.1.1 (2021-03)
The present document is intended to cover digital signatures supported by PKI and public key certificates, and aims to
meet the general requirements of the international community to provide trust and confidence in electronic transactions,
including, amongst other, applicable requirements from Regulation (EU) No 910/2014 [i.1].
The present document can be used for any transaction between an individual and a company, between two companies,
between an individual and a governmental body, etc. The present document is independent of any environment. It can
be applied to any environment e.g. smart cards, SIM cards, special programs for electronic signatures, etc.
The present document is part of a rationalized framework of standards (see ETSI TR 119 000 [i.4]).
ETSI
---------------------- Page: 6 ----------------------
7 ETSI TS 119 182-1 V1.1.1 (2021-03)
1 Scope
The present document:
1) Specifies a JSON [1] format for AdES signatures (JAdES signatures hereinafter) built on JSON Web
Signatures (JWS hereinafter) as specified in IETF RFC 7515 [2]. For this, the present document:
- Extends the JSON Web Signatures specified in IETF RFC 7515 [2] by defining an additional set of
JSON header parameters that can be incorporated in the JOSE Header (either in its JWS Protected
Header or its JWS Unprotected Header parts). Many of these new header parameters have the same
semantics as the attributes/properties defined in CAdES [i.2] and XAdES [4] digital signatures. Other
header parameters are defined to meet specific requirements that current JSON Web Signatures cannot
meet (e.g. for explicitly referencing detached JWS Payload). These new header parameters and their
corresponding types are defined in a JSON schema.
- Specifies the mechanisms for incorporating the aforementioned JSON components in JSON Web
Signatures [2] to build JAdES signatures, offering the same features as CAdES and XAdES in JSON
syntax, and therefore fulfilling the same requirements (such as the long-term validity of digital
signatures).
2) Defines four levels of JAdES baseline signatures addressing incremental requirements to maintain the validity
of the signatures over the long term. Each level requires the presence of certain JAdES header parameters,
suitably profiled for reducing the optionality as much as possible. The aforementioned levels provide the basic
features necessary for a wide range of business and governmental use cases for electronic procedures and
communications to be applicable to a wide range of communities when there is a clear need for
interoperability of digital signatures used in electronic documents.
EXAMPLE: An example of requirements raised in specific domains is signing HTTP messages exchanged by
parties in certain environments, which require signing both the HTTP body and some specific http
headers. The format specified in IETF RFC 7515 [2] does not provide any native mechanism for
individually identifying a detached JWS Payload. Clause 5.2.8 of the present document defines
sigD, a new JSON header parameter that allows to identify one or more detached data objects
which, suitably processed and concatenated, form the detached JWS Payload.
Procedures for creation, augmentation, and validation of JAdES digital signatures are out of scope.
NOTE 1: ETSI EN 319 102-1 [i.3] specifies procedures for creation, augmentation and validation of other types of
AdES digital signatures.
The present multi-part deliverable aims at supporting electronic signatures independent of any specific regulatory
framework.
NOTE 2: Specifically, but not exclusively, it is the aim that JAdES digital signatures specified in the present
multi-part deliverable can be used to meet the requirements of electronic signatures, advanced electronic
signatures, qualified electronic signatures, electronic seals, advanced electronic seals, and qualified
electronic seals as defined in Regulation (EU) No 910/2014 [i.1].
ETSI
---------------------- Page: 7 ----------------------
8 ETSI TS 119 182-1 V1.1.1 (2021-03)
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] IETF RFC 8259 (December 2017): "The JavaScript Object Notation (JSON) Data Interchange
Format".
[2] IETF RFC 7515 (May 2015): "JSON Web Signature (JWS)".
[3] IETF RFC 3061 (February 2001): "A URN Namespace of Object Identifiers".
[4] ETSI EN 319 132-1: "Electronic Signatures and Infrastructures (ESI); XAdES digital signatures;
Part 1: Building blocks and XAdES baseline signatures".
[5] IETF RFC 5035 (August 2007): "Enhanced Security Services (ESS) Update: Adding CertID
Algorithm Agility".
[6] Recommendation ITU-T X.509: "Information technology - Open Systems Interconnection - The
Directory: Public-key and attribute certificate frameworks".
[7] IETF RFC 3161 (August 2001): "Internet X.509 Public Key Infrastructure Time Stamp Protocol
(TSP)".
[8] IETF RFC 5280 (May 2008): "Internet X.509 Public Key Infrastructure Certificate and Certificate
Revocation List (CRL) Profile".
[9] IETF RFC 6960 (June 2013): "X.509 Internet Public Key Infrastructure Online Certificate Status
Protocol - OCSP".
[10] IETF RFC 5816 (April 2010): "ESSCertIDv2 Update for RFC 3161".
[11] IETF RFC 3494 (March 2003): "Lightweight Directory Access Protocol version 2 (LDAPv2) to
Historic Status".
[12] IETF RFC 4648 (October 2006): "The Base16, Base32, and Base64 Data Encodings".
[13] IETF RFC 3230 (January 2002): "Instance Digests in HTTP".
[14] IETF RFC 7797 (February 2016): "JSON Web Signature (JWS) Unencoded Payload Option".
[15] IETF RFC 3339 (July 2002): "Date and Time on the Internet: Timestamps".
[16] IETF RFC 7518 (May 2015): "JSON Web Algorithms (JWA)".
[17] IETF RFC 3986 (January 2005): "Uniform Resource Identifier (URI): Generic Syntax".
[18] IETF RFC 2616 (June 1999): "Hypertext Transfer Protocol - HTTP/1.1".
[19] draft-handrews-json-schema-01 (March 2018): "JSON Schema: A Media Type for Describing
JSON Documents".
ETSI
---------------------- Page: 8 ----------------------
9 ETSI TS 119 182-1 V1.1.1 (2021-03)
[20] draft-handrews-json-schema-validation-01 (March 2018): "JSON Schema Validation: A
Vocabulary for Structural Validation of JSON".
[21] ETSI TS 119 312 (V1.3.1): "Electronic Signatures and Infrastructures (ESI); Cryptographic
Suites".
[22] FIPS Publication 180-4 (August 2015): "Secure Hash Standard (SHS)", National Institute of
Standards and Technology.
[23] FIPS Publication 202 (August 2015): "SHA-3 Standard: Permutation-Based Hash and Extendable-
Output Functions", National Institute of Standards and Technology.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Regulation (EU) No 910/2014 of the European Parliament and of the Council on electronic
identification and trust services for electronic transactions in the internal market and repealing
Directive 1999/93/EC. OJ L 257, 28.08.2014, p. 73-114.
[i.2] ETSI EN 319 122-1: "Electronic Signatures and Infrastructures (ESI); CAdES digital signatures;
Part 1: Building blocks and CAdES baseline signatures".
[i.3] ETSI EN 319 102-1: "Electronic Signatures and Infrastructures (ESI); Procedures for Creation and
Validation of AdES Digital Signatures; Part 1: Creation and Validation".
[i.4] ETSI TR 119 000: "Electronic Signatures and Infrastructures (ESI); The framework for
standardization of signatures: overview".
[i.5] ETSI TR 119 001: "Electronic Signatures and Infrastructures (ESI); The framework for
standardization of signatures; Definitions and abbreviations".
[i.6] ETSI TR 119 100: "Electronic Signatures and Infrastructures (ESI); Guidance on the use of
standards for signature creation and validation".
[i.7] ETSI TS 119 172-1: "Electronic Signatures and Infrastructures (ESI); Signature Policies; Part 1:
Building blocks and table of contents for human readable signature policy documents".
[i.8] OASIS Standard: "Assertions and Protocols for the OASIS Security Assertion Markup Language
(SAML) V2.0".
[i.9] ETSI TS 101 533-1: "Electronic Signatures and Infrastructures (ESI); Data Preservation Systems
Security; Part 1: Require
...
SLOVENSKI STANDARD
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021
01-september-2021
Elektronski podpisi in infrastruktura (ESI) - Digitalni podpisi JAdES - 1. del:
Gradniki in izhodiščni podpisi JAdES
Electronic Signatures and Infrastructures (ESI) - JAdES digital signatures - Part 1:
Building blocks and JAdES baseline signatures
Ta slovenski standard je istoveten z: ETSI TS 119 182-1 V1.1.1 (2021-03)
ICS:
35.040.01 Kodiranje informacij na Information coding in general
splošno
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021
---------------------- Page: 2 ----------------------
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021
ETSI TS 119 182-1 V1.1.1 (2021-03)
TECHNICAL SPECIFICATION
Electronic Signatures and Infrastructures (ESI);
JAdES digital signatures;
Part 1: Building blocks and JAdES baseline signatures
---------------------- Page: 3 ----------------------
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021
2 ETSI TS 119 182-1 V1.1.1 (2021-03)
Reference
DTS/ESI-0019182-1
Keywords
electronic signature, JSON
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021
3 ETSI TS 119 182-1 V1.1.1 (2021-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 7
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definition of terms, symbols, abbreviations and terminology . 10
3.1 Terms . 10
3.2 Symbols . 10
3.3 Abbreviations . 10
3.4 Terminology . 11
4 General Requirements . 12
5 Header parameters semantics and syntax . 13
5.1 Use of header parameters defined in IETF RFC 7515 and IETF RFC 7797 . 13
5.1.1 Introduction. 13
5.1.2 The alg (X.509 URL) header parameter . 13
5.1.3 The cty (content type) header parameter . 13
5.1.4 The kid (key identifier) header parameter . 13
5.1.5 The x5u (X.509 URL) header parameter . 14
5.1.6 The x5t (X.509 Certificate SHA-1 Thumbprint) header parameter . 14
5.1.7 The x5t#S256 (X.509 Certificate SHA-256 Thumbprint) header parameter . 14
5.1.8 The x5c (X.509 Certificate Chain) header parameter . 14
5.1.9 The crit (critical) header parameter . 15
5.1.10 The b64 header parameter . 15
5.2 New signed header parameters . 15
5.2.1 The sigT (claimed signing time) header parameter . 15
5.2.2 Header parameters for certificate references. 16
5.2.2.1 Introduction . 16
5.2.2.2 The x5t#o (X509 certificate digest) header parameter . 16
5.2.2.3 The sigX5ts (X509 certificates digests) header parameter . 16
5.2.3 The srCms (signer commitments) header parameter . 17
5.2.4 The sigPl (signature production place) header parameter . 18
5.2.5 The srAts (signer attributes) header parameter . 18
5.2.6 The adoTst (signed data time-stamp) header parameter . 20
5.2.7 The sigPId (signature policy identifier) header parameter . 21
5.2.7.1 Semantics and syntax . 21
5.2.7.2 Signature policy qualifiers . 22
5.2.8 The sigD header parameter . 23
5.2.8.1 Semantics and Syntax . 23
5.2.8.2 Mechanism HttpHeaders . 24
5.2.8.3 Mechanisms supported by URI references . 25
5.2.8.3.1 General requirements . 25
5.2.8.3.2 Mechanism ObjectIdByURI . 25
5.2.8.3.3 Mechanism ObjectIdByURIHash . 26
5.3 New unsigned header parameter . 26
5.3.1 The etsiU header parameter . 26
5.3.2 The cSig (counter signature) JSON object . 29
5.3.3 The sigPSt JSON object. 29
5.3.4 The sigTst JSON object. 30
ETSI
---------------------- Page: 5 ----------------------
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021
4 ETSI TS 119 182-1 V1.1.1 (2021-03)
5.3.5 JSON objects for validation data values . 30
5.3.5.1 The xVals JSON array . 30
5.3.5.2 The rVals JSON object . 31
5.3.5.3 The axVals JSON array . 32
5.3.5.4 The arVals JSON object . 32
5.3.6 JSON values for long term availability and integrity of validation material . 33
5.3.6.1 The tstVD JSON object . 33
5.3.6.2 The arcTst JSON object . 34
5.3.6.2.1 Semantics and syntax . 34
5.3.6.2.2 Computation of message-imprint . 34
5.4 Generally useful syntax . 36
5.4.1 The oId data type . 36
5.4.2 The pkiOb data type . 37
5.4.3 Container for electronic time-stamps . 37
5.4.3.1 Introduction . 37
5.4.3.2 Containers for electronic time-stamps . 38
5.4.3.3 The tstContainer type . 38
6 JAdES baseline signatures. 39
6.1 Signature levels . 39
6.2 General requirements . 40
6.2.1 Algorithm requirements . 40
6.2.2 Notation for requirements . 40
6.3 Requirements on JAdES components and services . 42
Annex A (normative): Additional components Specification . 47
A.1 Components for validation data . 47
A.1.1 The xRefs JSON array . 47
A.1.2 The rRefs JSON object . 48
A.1.3 The axRefs JSON array . 50
A.1.4 The arRefs JSON object . 51
A.1.5 Time-stamps on references to validation data . 52
A.1.5.1 The sigRTst JSON object . 52
A.1.5.1.1 General . 52
A.1.5.1.2 Computation of the message imprint with Base64url incorporation . 52
A.1.5.1.3 Computation of the message imprint with JSON clear incorporation . 52
A.1.5.2 The rfsTst JSON object. 53
A.1.5.2.1 Semantics and syntax . 53
A.1.5.2.2 Computation of the message imprint with Base64url incorporation . 53
A.1.5.2.3 Computation of the message imprint with clear JSON incorporation . 53
Annex B (normative): JSON Schema files . 54
B.1 JSON Schema files location for JAdES components . 54
Annex C (informative): Correspondence between XAdES tags and JAdES tags. 55
C.1 Correspondence between XAdES qualifying properties tags and JAdES component tags . 55
Annex D (normative): Alternative mechanisms for long term availability and integrity of
validation data . 56
Annex E (normative): Digest algorithms identifiers for JAdES signatures. 57
Annex F (informative): Change History . 58
History . 59
ETSI
---------------------- Page: 6 ----------------------
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021
5 ETSI TS 119 182-1 V1.1.1 (2021-03)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 1 of a multi-part deliverable covering JAdES digital signatures, as identified below:
Part 1: "Building blocks and JAdES baseline signatures";
Part 2: "Extended JAdES signatures".
One JSON schema file, whose location is detailed in clause B.1 and which contain JSON Schema definitions
complements the present document.
The present document has taken as starting point the paper [i.18] "Bringing JSON signatures to ETSI AdES framework:
meet JAdES signatures", by Juan Carlos Cruellas, in Computer Standards and Interfaces, Volume 71, August 2020.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
Electronic commerce has emerged as a frequent way of doing business between companies across local, wide area and
global networks. Trust in this way of doing business is essential for the success and continued development of
electronic commerce. It is therefore important that companies using this electronic means of doing business have
suitable security controls and mechanisms in place to protect their transactions and to ensure trust and confidence with
their business partners. In this respect digital signatures are an important security component that can be used to protect
information and provide trust in electronic business.
ETSI
---------------------- Page: 7 ----------------------
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021
6 ETSI TS 119 182-1 V1.1.1 (2021-03)
The present document is intended to cover digital signatures supported by PKI and public key certificates, and aims to
meet the general requirements of the international community to provide trust and confidence in electronic transactions,
including, amongst other, applicable requirements from Regulation (EU) No 910/2014 [i.1].
The present document can be used for any transaction between an individual and a company, between two companies,
between an individual and a governmental body, etc. The present document is independent of any environment. It can
be applied to any environment e.g. smart cards, SIM cards, special programs for electronic signatures, etc.
The present document is part of a rationalized framework of standards (see ETSI TR 119 000 [i.4]).
ETSI
---------------------- Page: 8 ----------------------
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021
7 ETSI TS 119 182-1 V1.1.1 (2021-03)
1 Scope
The present document:
1) Specifies a JSON [1] format for AdES signatures (JAdES signatures hereinafter) built on JSON Web
Signatures (JWS hereinafter) as specified in IETF RFC 7515 [2]. For this, the present document:
- Extends the JSON Web Signatures specified in IETF RFC 7515 [2] by defining an additional set of
JSON header parameters that can be incorporated in the JOSE Header (either in its JWS Protected
Header or its JWS Unprotected Header parts). Many of these new header parameters have the same
semantics as the attributes/properties defined in CAdES [i.2] and XAdES [4] digital signatures. Other
header parameters are defined to meet specific requirements that current JSON Web Signatures cannot
meet (e.g. for explicitly referencing detached JWS Payload). These new header parameters and their
corresponding types are defined in a JSON schema.
- Specifies the mechanisms for incorporating the aforementioned JSON components in JSON Web
Signatures [2] to build JAdES signatures, offering the same features as CAdES and XAdES in JSON
syntax, and therefore fulfilling the same requirements (such as the long-term validity of digital
signatures).
2) Defines four levels of JAdES baseline signatures addressing incremental requirements to maintain the validity
of the signatures over the long term. Each level requires the presence of certain JAdES header parameters,
suitably profiled for reducing the optionality as much as possible. The aforementioned levels provide the basic
features necessary for a wide range of business and governmental use cases for electronic procedures and
communications to be applicable to a wide range of communities when there is a clear need for
interoperability of digital signatures used in electronic documents.
EXAMPLE: An example of requirements raised in specific domains is signing HTTP messages exchanged by
parties in certain environments, which require signing both the HTTP body and some specific http
headers. The format specified in IETF RFC 7515 [2] does not provide any native mechanism for
individually identifying a detached JWS Payload. Clause 5.2.8 of the present document defines
sigD, a new JSON header parameter that allows to identify one or more detached data objects
which, suitably processed and concatenated, form the detached JWS Payload.
Procedures for creation, augmentation, and validation of JAdES digital signatures are out of scope.
NOTE 1: ETSI EN 319 102-1 [i.3] specifies procedures for creation, augmentation and validation of other types of
AdES digital signatures.
The present multi-part deliverable aims at supporting electronic signatures independent of any specific regulatory
framework.
NOTE 2: Specifically, but not exclusively, it is the aim that JAdES digital signatures specified in the present
multi-part deliverable can be used to meet the requirements of electronic signatures, advanced electronic
signatures, qualified electronic signatures, electronic seals, advanced electronic seals, and qualified
electronic seals as defined in Regulation (EU) No 910/2014 [i.1].
ETSI
---------------------- Page: 9 ----------------------
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021
8 ETSI TS 119 182-1 V1.1.1 (2021-03)
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] IETF RFC 8259 (December 2017): "The JavaScript Object Notation (JSON) Data Interchange
Format".
[2] IETF RFC 7515 (May 2015): "JSON Web Signature (JWS)".
[3] IETF RFC 3061 (February 2001): "A URN Namespace of Object Identifiers".
[4] ETSI EN 319 132-1: "Electronic Signatures and Infrastructures (ESI); XAdES digital signatures;
Part 1: Building blocks and XAdES baseline signatures".
[5] IETF RFC 5035 (August 2007): "Enhanced Security Services (ESS) Update: Adding CertID
Algorithm Agility".
[6] Recommendation ITU-T X.509: "Information technology - Open Systems Interconnection - The
Directory: Public-key and attribute certificate frameworks".
[7] IETF RFC 3161 (August 2001): "Internet X.509 Public Key Infrastructure Time Stamp Protocol
(TSP)".
[8] IETF RFC 5280 (May 2008): "Internet X.509 Public Key Infrastructure Certificate and Certificate
Revocation List (CRL) Profile".
[9] IETF RFC 6960 (June 2013): "X.509 Internet Public Key Infrastructure Online Certificate Status
Protocol - OCSP".
[10] IETF RFC 5816 (April 2010): "ESSCertIDv2 Update for RFC 3161".
[11] IETF RFC 3494 (March 2003): "Lightweight Directory Access Protocol version 2 (LDAPv2) to
Historic Status".
[12] IETF RFC 4648 (October 2006): "The Base16, Base32, and Base64 Data Encodings".
[13] IETF RFC 3230 (January 2002): "Instance Digests in HTTP".
[14] IETF RFC 7797 (February 2016): "JSON Web Signature (JWS) Unencoded Payload Option".
[15] IETF RFC 3339 (July 2002): "Date and Time on the Internet: Timestamps".
[16] IETF RFC 7518 (May 2015): "JSON Web Algorithms (JWA)".
[17] IETF RFC 3986 (January 2005): "Uniform Resource Identifier (URI): Generic Syntax".
[18] IETF RFC 2616 (June 1999): "Hypertext Transfer Protocol - HTTP/1.1".
[19] draft-handrews-json-schema-01 (March 2018): "JSON Schema: A Media Type for Describing
JSON Documents".
ETSI
---------------------- Page: 10 ----------------------
SIST-TS ETSI/TS 119 182-1 V1.1.1:2021
9 ETSI TS 119 182-1 V1.1.1 (2021-03)
[20] draft-handrews-json-schema-validation-01 (March 2018): "JSON Schema Validation: A
Vocabulary for Structural Validation of JSON".
[21] ETSI TS 119 312 (V1.3.1): "Electronic Signatures and Infrastructures (ESI); Cryptographic
Suites".
[22] FIPS Publication 180-4 (August 2015): "Secure Hash Standard (SHS)", National Institute of
Standards and Technology.
[23] FIPS Publication 202 (August 2015): "SHA-3 Standard: Permutation-Based Hash and Extendable-
Output Functions", National Institute of Standards and Technology.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Regulation (EU) No 910/2014 of the European Parliament and of the Council on electronic
identification and trust services for electronic transactions in the internal market and repealing
Directive 1999/93/EC. OJ L 257, 28.08.2014, p. 73-114.
[i.2] ETSI EN 319 122-1: "Electronic Signatures and Infrastructures (E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.