ETSI EN 302 435-2 V1.3.1 (2009-12)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
REN/ERM-TGUWB-006-2
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Naprave kratkega dosega (SRD) - Tehnične karakteristike za opremo SRD, ki uporablja ultra širokopasovno (UWB) tehnologijo - Aplikacije opreme za analizo in klasifikacijo vgrajenih materialov, ki deluje v frekvenčnem pasu od 2,2 GHz do 8 GHz - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Pričujoči dokument določa zahteve za aplikacije za analizo in klasifikacijo vgrajenih materialov z uporabo tehnologije UWB, ki deluje v celotnem ali delu frekvenčnega pasu od 2,2 GHz do 8,5 GHz. Dodatno določa zmanjšane emisije v pasovih od 0,96 GHz do 2,2 GHz in od 8,5 GHz do 10,6 GHz. Oprema, ki jo zajema pričujoči dokument, deluje v skladu s spremenjenim sklepom Odbora za elektronske komunikacije ECC/DEC(07)01 o posebnih napravah za zaznavanje materialov z uporabo ultra širokopasovne (UWB) tehnologije (spremenjen 26. 6. 2009)[3] in Odločbo Komisije z dne 21. 4. 2009 [i.5], ki spreminja Odločbo 2007/131/ES [2] o dovoljenju za usklajeno rabo radijskega spektra v Skupnosti za opremo, ki uporablja širokopasovno tehnologijo (notificirano pod številko dokumenta C(2009) 2787) (2009/343/ES) [i.5].
Pričujoči dokument velja za:
opremo za analizo in klasifikacijo vgrajenih materialov za UWB za aplikacije slikanja in detekcijo objektov,
opremo, opremljeno z vgrajeno anteno,
ročne naprave.
Pričujoči dokument ne velja za:
komunikacijske naprave za UWB,
georadarske naprave in
naprave za radarsko slikanje skozi steno,
kot je opredeljeno v Priporočilu ITU-R SM.1754 [i.3].
Pričujoči dokument določa opremo, ki je narejena tako, da ne seva v odprti prostor. Deluje le, kadar je nameščena tako, da seva neposredno v absorptivni material, kot so stene in drugi vgrajeni materiali, ki absorbirajo emisije. Pričujoči dokument ne vključuje nujno vseh značilnosti, potrebnih za uporabnika, niti nujno ne predstavlja največje dosegljive zmogljivosti. Pričujoči dokument zajema določbe člena 3.2 Direktive 1999/5/ES [i.2] (direktiva R&TTE), ki navaja »... radijska oprema je narejena tako, da učinkovito izrablja spekter, razporejen za prizemne/vesoljske radiokomunikacije in orbitalne vire, tako da ne pride do škodljivega motenja«.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.577(Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Technical characteristics for SRD equipment using Ultra WideBand technology (UWB) - Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 302 435-2 Version 1.3.1SIST EN 302 435-2 V1.3.1:2010en01-februar-2010SIST EN 302 435-2 V1.3.1:2010SLOVENSKI
STANDARD
SIST EN 302 435-2 V1.3.1:2010
ETSI EN 302 435-2 V1.3.1 (2009-12)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Short Range Devices (SRD);Technical characteristics for SRD equipment usingUltra WideBand technology (UWB);Building Material Analysis and Classification equipment applicationsoperating in the frequency band from 2,2 GHz to 8,5 GHz;Part 2: Harmonized EN covering the essential requirementsof article 3.2 of the R&TTE Directive SIST EN 302 435-2 V1.3.1:2010
ETSI ETSI EN 302 435-2 V1.3.1 (2009-12) 2
Reference REN/ERM-TGUWB-006-2 Keywords radio, SRD, UWB, testing, regulation ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 435-2 V1.3.1:2010
ETSI ETSI EN 302 435-2 V1.3.1 (2009-12) 3 Contents Intellectual Property Rights . 4 Foreword . 4 Introduction . 4 1 Scope . 5 2 References . 6 2.1 Normative references . 6 2.2 Informative references . 6 3 Definitions, symbols and abbreviations . 7 3.1 Definitions . 7 3.2 Symbols . 7 3.3 Abbreviations . 7 4 Technical requirements specifications . 7 4.1 Environmental profile . 7 4.2 Conformance requirements . 7 4.2.1 Transmitter requirements . 7 4.2.1.1 Maximum Undesired UWB Emissions (UE) . 7 4.2.1.2 Maximum Other Emissions (OE) . 7 4.2.1.3 Total Power spectral density (UE-TP) . 7 4.2.1.4 Minimum pulse repetition frequency . 7 4.2.2 Other equipment requirements . 7 4.2.2.1 Design requirements. 7 4.2.2.2 Listen before Talk . 8 5 Testing for compliance with technical requirements . 8 5.1 Environmental conditions for testing . 8 5.2 Essential radio test suites . 8 5.2.1 Transmitter test suites . 8 5.2.1.1 Maximum Undesired UWB Emissions (UE) . 8 5.2.1.2 Maximum Other Emissions (OE) . 8 5.2.1.3 Total Power spectral density (UE-TP) . 8 5.2.2 Other test suites . 8 5.2.2.1 Listen before Talk . 8 5.3 Interpretation of measurement results . 8 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 9 Annex B (informative): The EN title in the official languages . 11 Annex C (informative): Bibliography . 12 History . 13
SIST EN 302 435-2 V1.3.1:2010
ETSI ETSI EN 302 435-2 V1.3.1 (2009-12) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 2 of a multi-part deliverable covering Ultra WideBand (UWB) Building Material Analysis (BMA) and Classification equipment applications operating in the frequency band from 2,2 GHz to 8 GHz, as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
National transposition dates Date of adoption of this EN: 7 December 2009 Date of latest announcement of this EN (doa): 31 March 2010 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 September 2010 Date of withdrawal of any conflicting National Standard (dow): 30 September 2011
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular structure is shown in EG 201 399 [i.1]. SIST EN 302 435-2 V1.3.1:2010
ETSI ETSI EN 302 435-2 V1.3.1 (2009-12) 5 1 Scope The present document specifies the requirements for Building Material Analysis and Classification (BMA) applications using UWB technology operating in all or part of the frequency band from 2,2 GHz to 8,5 GHz. Additionally it specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz.
Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on specific Material Sensing devices using Ultra-Wideband (UWB) technology (amended 26 June 2009) [3] and Commission Decision of 21 April 2009 [i.5] amending Decision 2007/131/EC [2] on allowing the use of the radio spectrum for equipment using ultra-wideband technology in a harmonized manner in the Community (notified under document number C(2009) 2787) (2009/343/EC) [i.5]. Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands Transmit 2 200 MHz to 8 500 MHz Receive 2 200 MHz to 8 500 MHz
The present document applies to: • UWB building material analysis and classification equipment for imaging and object dete
...
ETSI EN 302 435-2 V1.3.1 (2009-12)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Technical characteristics for SRD equipment using
Ultra WideBand technology (UWB);
Building Material Analysis and Classification equipment applications
operating in the frequency band from 2,2 GHz to 8,5 GHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 ETSI EN 302 435-2 V1.3.1 (2009-12)
Reference
REN/ERM-TGUWB-006-2
Keywords
radio, SRD, UWB, testing, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 302 435-2 V1.3.1 (2009-12)
Contents
Intellectual Property Rights . 4
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Technical requirements specifications . 7
4.1 Environmental profile . 7
4.2 Conformance requirements . 7
4.2.1 Transmitter requirements . 7
4.2.1.1 Maximum Undesired UWB Emissions (UE) . 7
4.2.1.2 Maximum Other Emissions (OE) . 7
4.2.1.3 Total Power spectral density (UE-TP) . 7
4.2.1.4 Minimum pulse repetition frequency . 7
4.2.2 Other equipment requirements . 7
4.2.2.1 Design requirements. 7
4.2.2.2 Listen before Talk . 8
5 Testing for compliance with technical requirements . 8
5.1 Environmental conditions for testing . 8
5.2 Essential radio test suites . 8
5.2.1 Transmitter test suites . 8
5.2.1.1 Maximum Undesired UWB Emissions (UE) . 8
5.2.1.2 Maximum Other Emissions (OE) . 8
5.2.1.3 Total Power spectral density (UE-TP) . 8
5.2.2 Other test suites . 8
5.2.2.1 Listen before Talk . 8
5.3 Interpretation of measurement results . 8
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 9
Annex B (informative): The EN title in the official languages . 11
Annex C (informative): Bibliography . 12
History . 13
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 302 435-2 V1.3.1 (2009-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 2 of a multi-part deliverable covering Ultra WideBand (UWB) Building Material
Analysis (BMA) and Classification equipment applications operating in the frequency band from 2,2 GHz to 8 GHz, as
identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
National transposition dates
Date of adoption of this EN: 7 December 2009
Date of latest announcement of this EN (doa): 31 March 2010
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 September 2010
Date of withdrawal of any conflicting National Standard (dow): 30 September 2011
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 [i.1].
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 302 435-2 V1.3.1 (2009-12)
1 Scope
The present document specifies the requirements for Building Material Analysis and Classification (BMA) applications
using UWB technology operating in all or part of the frequency band from 2,2 GHz to 8,5 GHz. Additionally it
specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz.
Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on
specific Material Sensing devices using Ultra-Wideband (UWB) technology (amended 26 June 2009) [3] and
Commission Decision of 21 April 2009 [i.5] amending Decision 2007/131/EC [2] on allowing the use of the radio
spectrum for equipment using ultra-wideband technology in a harmonized manner in the Community (notified under
document number C(2009) 2787) (2009/343/EC) [i.5].
Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands
Transmit 2 200 MHz to 8 500 MHz
Receive 2 200 MHz to 8 500 MHz
The present document applies to:
• UWB building material analysis and classification equipment for imaging and object detection applications;
• equipment fitted with an integral antenna;
• handheld devices.
The present document does not apply to:
• UWB communication devices;
• Ground penetrating radar devices; nor
• Through-wall radar imaging devices;
as defined in ITU-R Recommendation SM.1754 [i.3].
The present document specifies the equipment which is designed to not radiate into the free space. It is designed to
function only when positioned such that it radiates directly into the absorptive material such as walls and other buildi
...
Final draft ETSI EN 302 435-2 V1.3.1 (2009-08)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Technical characteristics for SRD equipment using
Ultra WideBand technology (UWB);
Building Material Analysis and Classification equipment applications
operating in the frequency band from 2,2 GHz to 8,5 GHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 302 435-2 V1.3.1 (2009-08)
Reference
REN/ERM-TGUWB-006-2
Keywords
radio, SRD, UWB, testing, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 302 435-2 V1.3.1 (2009-08)
Contents
Intellectual Property Rights . 4
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Technical requirements specifications . 7
4.1 Environmental profile . 7
4.2 Conformance requirements . 7
4.2.1 Transmitter requirements . 7
4.2.1.1 Maximum Undesired UWB Emissions (UE) . 7
4.2.1.2 Maximum Other Emissions (OE) . 7
4.2.1.3 Total Power spectral density (UE-TP) . 7
4.2.1.4 Minimum pulse repetition frequency . 7
4.2.2 Other equipment requirements . 7
4.2.2.1 Design requirements. 7
4.2.2.2 Listen before Talk . 8
5 Testing for compliance with technical requirements . 8
5.1 Environmental conditions for testing . 8
5.2 Essential radio test suites . 8
5.2.1 Transmitter test suites . 8
5.2.1.1 Maximum Undesired UWB Emissions (UE) . 8
5.2.1.2 Maximum Other Emissions (OE) . 8
5.2.1.3 Total Power spectral density (UE-TP) . 8
5.2.2 Other test suites . 8
5.2.2.1 Listen before Talk . 8
5.3 Interpretation of measurement results . 8
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 9
Annex B (informative): The EN title in the official languages . 11
Annex C (informative): Bibliography . 12
History . 13
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 302 435-2 V1.3.1 (2009-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the ETSI standards One-
step Approval Procedure.
The present document is part 2 of a multi-part deliverable covering Ultra WideBand (UWB) Building Material
Analysis (BMA) and Classification equipment applications operating in the frequency band from 2,2 GHz to 8 GHz, as
identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 [i.1].
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 302 435-2 V1.3.1 (2009-08)
1 Scope
The present document specifies the requirements for Building Material Analysis and Classification (BMA) applications
using UWB technology operating in all or part of the frequency band from 2,2 GHz to 8,5 GHz. Additionally it
specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz.
Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on
specific Material Sensing devices using Ultra-Wideband (UWB) technology (amended 26 June 2009) [3] and
Commission Decision of 21 April 2009 [i.5] amending Decision 2007/131/EC [2] on allowing the use of the radio
spectrum for equipment using ultra-wideband technology in a harmonized manner in the Community (notified under
document number C(2009) 2787) (2009/343/EC) [i.5].
Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands
Transmit 2 200 MHz to 8 500 MHz
Receive 2 200 MHz to 8 500 MHz
The present document applies to:
• UWB building material analysis and classification equipment for imaging and object detection applications;
• equipment fitted with an integral antenna;
• handheld devices.
The present document does not apply to:
• UWB communication devices;
• Ground penetrating radar devices; nor
• Through-wall radar imaging devices;
as defined in ITU-R Recommendation SM.1754 [i.3].
The present document specifies the equipment which is designed to not radiate into the free space. It is designed to
function only when positioned such that it radiates directly into the absorptive material such
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.