ETSI EN 305 200-4-4 V1.1.1 (2018-04)
Integrated broadband cable telecommunication networks (CABLE); Energy management; Operational infrastructures; Global KPIs; Part 4: Design assessments; Sub-part 4: Cable Access Networks
Integrated broadband cable telecommunication networks (CABLE); Energy management; Operational infrastructures; Global KPIs; Part 4: Design assessments; Sub-part 4: Cable Access Networks
DEN/CABLE-00022
Integrirana širokopasovna kabelska telekomunikacijska omrežja (CABLE) - Upravljanje z energijo - Operativna infrastruktura - Globalni ključni kazalniki uspešnosti (KPI) - 4. del: Ocene načrtovanja - 4. poddel: Kabelska dostopovna omrežja
Ta dokument določa zahteve za globalni ključni kazalnik uspešnosti (KPI) za upravljanje z energijo (KPIEP) in njegov temeljni ciljni ključni kazalnik uspešnosti za porabo energije ter naslavlja naslednje cilje za širokopasovna dostopovna omrežja kabelskih operaterjev:
• poraba energije;
• obnovljiva energija.
Zahteve so preslikane v koncepte ETSI EN 305 200-1 [i.5].
Upravljanje z energijo kabelskih dostopovnih omrežij je sestavljeno iz več neodvisnih slojev. Ta dokument naslavlja učinkovitost infrastruktur, ki podpirajo običajno delovanje gostujoče opreme ICT znotraj kabelskega dostopovnega omrežja (npr. distribucija električne energije, okoljski nadzor, zaščita in varnost). Ta dokument ne naslavlja drugih slojev, kot so učinkovitost same opreme ICT, učinkovitost uporabe razpoložljive zmogljivosti procesorja,
in sloji, povezani s končno zagotovljeno storitvijo (npr. potrebna zmogljivost procesorja glede na rezultat po elementih), ali prekrivni sloji (npr. poraba energije glede na rezultat po elementih).
Učinek na okolje in upravljanje različnih virov energije ne spadata na področje uporabe tega dokumenta.
V tem dokumentu:
• točka 4 opisuje energijske parametre za kabelska dostopovna omrežja, ki uporabljajo DOCSIS 3.0 in/ali
DOCSIS 3.1, skupaj z vključitvami/izključitvami različnih energijskih virov;
• točka 5 določa zahteve za merjenje, izračun, razvrstitev in poročanje za KPIEP.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RPUHåMDIntegrated broadband cable telecommunication networks (CABLE) - Energy management - Operational infrastructures - Global KPIs - Part 4: Design assessments - Sub-part 4: Cable Access Networks35.020Informacijska tehnika in tehnologija na splošnoInformation technology (IT) in general33.040.01Telekomunikacijski sistemi na splošnoTelecommunication systems in general27.015VSORãQREnergy efficiency. Energy conservation in generalICS:Ta slovenski standard je istoveten z:ETSI EN 305 200-4-4 V1.1.1 (2018-04)SIST EN 305 200-4-4 V1.1.1:2018en01-junij-2018SIST EN 305 200-4-4 V1.1.1:2018SLOVENSKI
STANDARD
SIST EN 305 200-4-4 V1.1.1:2018
ETSI EN 305 200-4-4 V1.1.1 (2018-04) Integrated broadband cable telecommunication networks (CABLE); Energy management; Operational infrastructures; Global KPIs; Part 4: Design assessments; Sub-part 4: Cable Access Networks
EUROPEAN STANDARD SIST EN 305 200-4-4 V1.1.1:2018
ETSI ETSI EN 305 200-4-4 V1.1.1 (2018-04)2
Reference DEN/CABLE-00022 Keywords cable, energy efficiency ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETM are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM® and the GSM logo are trademarks registered and owned by the GSM Association. SIST EN 305 200-4-4 V1.1.1:2018
ETSI ETSI EN 305 200-4-4 V1.1.1 (2018-04)3 Contents Intellectual Property Rights . 7 Foreword . 7 Modal verbs terminology . 7 Introduction . 8 1 Scope . 9 2 References . 9 2.1 Normative references . 9 2.2 Informative references . 9 3 Definitions, symbols and abbreviations . 11 3.1 Definitions . 11 3.2 Symbols . 12 3.3 Abbreviations . 12 4 Energy management of cable access networks . 13 4.1 General . 13 4.1.1 Cable access networks . 13 4.1.2 Cable access network technologies . 14 4.1.2.1 General . 14 4.1.2.2 DOCSIS 3.0 . 14 4.1.2.3 DOCSIS 3.1 . 15 4.1.3 Energy consumption . 15 4.1.4 Data volume . 16 4.1.4.1 General . 16 4.1.4.2 DOCSIS 3.0 . 16 4.1.4.3 DOCSIS 3.1 . 17 4.2 Application of KPIEP . 17 4.3 Related standards and regulations . 17 4.3.1 Standards . 17 4.3.1.1 DOCSIS 3.0 . 17 4.3.1.2 DOCSIS 3.1 . 18 4.3.2 Regulation . 18 5 Global KPI (KPIEP) for cable access networks . 18 5.1 General . 18 5.1.1 Global KPI (KPIEP) for cable access networks . 18 5.1.2 Objective KPIs . 19 5.1.2.1 Energy consumption (KPIEC,NIU) . 19 5.1.2.2 Task efficiency (KPITE) . 19 5.1.2.3 Energy re-use (KPIREUSE) . 19 5.1.2.4 Renewable energy (KPIREN) . 19 5.2 Scale . 20 5.3 Evolution . 20 5.4 Definition of boundaries . 20 5.5 Formulae. 20 5.5.1 Global KPI (KPIEP) for cable access networks . 20 5.5.1.1 General . 20 5.5.1.2 Definition of terms . 20 5.5.2 Objective KPIs for cable access networks . 20 5.5.2.1 Energy consumption (KPIEC,NIU) for DOCSIS 3.0 . 20 5.5.2.1.1 Formula . 20 5.5.2.1.2 Definitions of terms . 20 5.5.2.2 Energy consumption (KPIEC,NIU) for DOCSIS 3.1 . 21 5.5.2.2.1 Formula . 21 5.5.3 Data_volume (data_volume) . 21 5.5.3.1 General . 21 SIST EN 305 200-4-4 V1.1.1:2018
ETSI ETSI EN 305 200-4-4 V1.1.1 (2018-04)4 5.5.3.2 Data_volume (DNIU) for DOCSIS 3.0 . 21 5.5.3.2.1 General . 21 5.5.3.2.2 Formula . 21 5.5.3.2.3 Definitions of terms . 22 5.5.3.3 Data_volume (DNIU) for DOCSIS 3.1 . 22 5.5.3.3.1 General . 22 5.5.3.3.2 Formula . 22 5.6 Reporting . 23 Annex A (informative): History of network schematics . 24 Annex B (informative): DOCSIS 3.0 data rates (downstream/upstream) . 25 Annex C (informative): DOCSIS 3.0 Use Case Sample Calculation of KPIEP . 26 History . 28
SIST EN 305 200-4-4 V1.1.1:2018
ETSI ETSI EN 305 200-4-4 V1.1.1 (2018-04)5 List of figures Figure 1: Updated schematic of fixed and mobile communication networks .13 Figure 2: Schematic of cable access network technologies .14 Figure 3: Schematic of cable access network energy consumption .15 Figure A.1: Schematic of fixed and mobile communication networks (June 2011) .24
SIST EN 305 200-4-4 V1.1.1:2018
ETSI ETSI EN 305 200-4-4 V1.1.1 (2018-04)6 List of tables Table B.1: Available data rates for a DVB-C system (in Mb/s) .25 Table B.2: Data rates for DOCSIS US channels (in Mb/s) .25 Table C.1: Example of DOCSIS 3.0 calculation of KPIEP .27
SIST EN 305 200-4-4 V1.1.1:2018
ETSI ETSI EN 305 200-4-4 V1.1.1 (2018-04)7 Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This European Standard (EN) has been produced by ETSI Technical Committee Integrated broadband cable telecommunication networks (CABLE). The present document is part 4, sub-part 4 of a multi-part deliverable covering Global Key Performance Indicators for energy management of operational broadband deployment infrastructures as identified below: Part 1: "General requirements"; Part 2: "Specific requirements"; Part 3: "ICT sites"; Part 4: "Design assessments"; Sub-part 4: "Cable Access Networks".
National transposition dates Date of adoption of this EN: 24 April 2018 Date of latest announcement of this EN (doa): 31 July 2018 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 January 2019 Date of withdrawal of any conflicting National Standard (dow): 31 January 2019
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. SIST EN 305 200-4-4 V1.1.1:2018
ETSI ETSI EN 305 200-4-4 V1.1.1 (2018-04)8 Introduction Energy costs continue to rise, a trend that will continue in the future, while broadband penetration is introducing new active equipment to the network architecture. In this context, and to reflect other environmental aspects of sustainability, it is vital that the main telecommunication operators implement effective general engineering of fixed and mobile broadband networks and sites provisioning, managing or using those networks (i.e. ICT sites) in order to respond to critical issues of energy consumption while proposing essential solutions to true broadband deployment. To guide this process, it is essential that metrics are defined, termed Global Key Performance Indicators (KPIs), that enable energy usage to be managed more effectively. The Global Key Performance Indicators of the ETSI EN 305 200 [i.4] series address operational infrastructures and do not consider design/operation of components of broadband deployment networks. The ETSI EN 305 200 series of standards [i.4] comprises: • ETSI EN 305 200-1 [i.5]: a generic requirements document addressing Global KPIs for operational infrastructures; • a sub-series ETSI EN 305 200-2 that defines the Global KPIs, and drives energy management targets, for specific operational networks and sites and which describes how the Global KPIs are to be applied (which may be used to support future regulatory objectives): - ETSI EN 305 200-2-1 [i.6]: ICT sites; - ETSI EN 305 200-2-2 [i.7]: Fixed broadband access networks; NOTE: Excluding cable access networks. - ETSI EN 305 200-2-3 [i.8]: Mobile broadband access networks; The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain information on values that have been used by certain organizations. • a sub-series ETSI EN 305 200-3 [i.9] including ETSI EN 305 200-3-1 [i.10] that defines particular implementations of Global KPIs within ICT sites based on the requirements of ETSI EN 305 200-2-1 [i.6], and which may define levels of performance to simplify and provide clearer understanding of Global KPIs allowing the evaluation of performance of energy use management in ICT sites; The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain information on values that have been used by certain organizations. • a sub-series ETSI EN 305 200-4 including ETSI EN 305 200-4-4, the present document, that defines design assessments of Global KPIs, and drives energy management targets, for specific operational networks and sites and which describes how the Global KPIs are to be applied (which may be used to support future regulatory objectives). These standards may be considered to be a contribution to the application of ISO 50001 [i.11] in relation to the development of policy for the continuous improvement of energy management and will accelerate: • the availability of operational infrastructure architectures and network implementations that use energy more efficiently; • the definition and attainment objectives for other environmental aspects of sustainability for operational broadband networks. The present document specifies the requirements for a Global KPI for energy management (KPIEM) and its underpinning Objective KPI for energy consumption for cable access networks of broadband deployment employing DOCSIS 3.0 and/or DOCSIS 3.1.The requirements are mapped to the general requirements of ETSI EN 305 200-1 [i.5]. DOCSIS® is a registered Trade Mark of Cable Television Laboratories, Inc., and is used in the present document with permission. SIST EN 305 200-4-4 V1.1.1:2018
ETSI ETSI EN 305 200-4-4 V1.1.1 (2018-04)9 1 Scope The present document specifies the requirements for a Global KPI for energy management (designated KPIEP) and its underpinning Objective KPI for energy consumption addressing the following objectives for the cable operator access networks of broadband deployment: • energy consumption; • renewable energy. The requirements are mapped to the concepts of ETSI EN 305 200-1 [i.5]. Energy management of cable access networks comprises a number of independent layers. The present document addresses performance of infrastructures that supports the normal function of hosted ICT equipment within the cable access network (e.g. power distribution, environmental control, security and safety). The present document does not address other layers such as performance of ICT equipment itself, performance of usage of available processing power, and layers related to final service delivered (e.g. processing power required per itemized outcome) or overlay layers (e.g. final energy required per itemized outcome). The environmental impact and management of different energy sources are outside the scope of the present document. Within the present document: • clause 4 describes the energy parameters for cable access networks employing DOCSIS 3.0 and/or DOCSIS 3.1 together with inclusions/exclusions of different energy sources; • clause 5 specifies the requirements for measurement, calculation, classification and reporting of KPIEP. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https://docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. Not applicable. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. SIST EN 305 200-4-4 V1.1.1:2018
ETSI ETSI EN 305 200-4-4 V1.1.1 (2018-04)10 [i.1] Commission Regulation (EC) No 801/2013 of 22 August 2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment, and amending Regulation (EC) No 642/2009 with regard to ecodesign requirements for televisions. NOTE: Available at http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2013:225:0001:0012:en:PDF. [i.2] Commission Regulation (EC) No 1275/2008 of 17 December 2008 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment. NOTE: Available at http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2008:339:0045:0052:en:PDF. [i.3] Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products ("Ecodesign Directive"). NOTE: Available at http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2009:285:0010:0035:en:PDF. [i.4] ETSI EN 305 200 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs". [i.5] ETSI EN 305 200-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 1: General requirements". [i.6] ETSI EN 305 200-2-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 1: ICT Sites". [i.7] ETSI EN 305 200-2-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 2: Fixed broadband access networks". [i.8] ETSI EN 305 200-2-3: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 3: Mobile broadband access networks". [i.9] ETSI EN 305 200-3 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 3: ICT Sites". [i.10] ETSI EN 305 200-3-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 3: ICT Sites; Sub-part 1: DCEM". [i.11] ISO 50001: "Energy management systems - Requirements with guidance for use". [i.12] ETSI EN 302 878-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 1: General; DOCSIS 3.0". [i.13] ETSI EN 302 878-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 2: Physical Layer; DOCSIS 3.0". [i.14] ETSI EN 302 878-3: "Access, Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 3: Downstream Radio Frequency Interface; DOCSIS 3.0". [i.15] ETSI EN 302 878-4: "Access, Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 4: MAC and Upper Layer Protocols; DOCSIS 3.0". [i.16] ETSI EN 302 878-5: "Access, Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 5: Security Services; DOCSIS 3.0". SIST EN 305 200-4-4 V1.1.1:2018
ETSI ETSI EN 305 200-4-4 V1.1.1 (2018-04)11 [i.17] ETSI TS 103 311-1: "Integrated broadband cable telecommunication networks (CABLE); Fourth Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 1: General; DOCSIS® 3.1". [i.18] ETSI TS 103 311-2: "Integrated broadband cable telecommunication networks (CABLE); Fourth Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 2: Physical Layer; DOCSIS® 3.1". [i.19] ETSI TS 103 311-3: "Integrated broadband cable telecommunication networks (CABLE); Fourth Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 3: MAC and Upper Layer Protocols Interface; DOCSIS® 3.1". [i.20] M/462 Standardisation mandate addressed to CEN, CENELEC and ETSI in the field of ICT to enable efficient energy use in fixed and mobile information and communication networks. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: cable access network: access network provided by cable operators comprising optical fibre and metallic cabling providing direct connection to customer premises Customer Premises (CP): any location which is the sole responsibility of the customer energy consumption: total consumption of energy by an operational infrastructure energy management: combination of reduced energy consumption and increased task effectiveness, re-use of energy and use of renewable energy Fibre Node (FN): device which performs a media conversion between an optical fibre cable link and a coaxial cable link in a cable access network global KPI: KPI, combining two or more Objective KPIs, which reflects the overall energy management performance of an operational infrastructure Head-End (HE): facility for receiving television signals for processing and distribution over a cable access network ICT equipment: equipment providing data storage, processing and transport services NOTE: A combination of Information Technology Equipment and Network Telecommunications Equipment. ICT site: site containing structures or group of structures dedicated to the accommodation, interconnection and ope
...
ETSI EN 305 200-4-4 V1.1.1 (2018-04)
EUROPEAN STANDARD
Integrated broadband cable
telecommunication networks (CABLE);
Energy management;
Operational infrastructures;
Global KPIs;
Part 4: Design assessments;
Sub-part 4: Cable Access Networks
---------------------- Page: 1 ----------------------
2 ETSI EN 305 200-4-4 V1.1.1 (2018-04)
Reference
DEN/CABLE-00022
Keywords
cable, energy efficiency
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 305 200-4-4 V1.1.1 (2018-04)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 11
3.1 Definitions . 11
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Energy management of cable access networks . 13
4.1 General . 13
4.1.1 Cable access networks . 13
4.1.2 Cable access network technologies . 14
4.1.2.1 General . 14
4.1.2.2 DOCSIS 3.0 . 14
4.1.2.3 DOCSIS 3.1 . 15
4.1.3 Energy consumption . 15
4.1.4 Data volume . 16
4.1.4.1 General . 16
4.1.4.2 DOCSIS 3.0 . 16
4.1.4.3 DOCSIS 3.1 . 17
4.2 Application of KPI . 17
EP
4.3 Related standards and regulations . 17
4.3.1 Standards . 17
4.3.1.1 DOCSIS 3.0 . 17
4.3.1.2 DOCSIS 3.1 . 18
4.3.2 Regulation . 18
5 Global KPI (KPI ) for cable access networks . 18
EP
5.1 General . 18
5.1.1 Global KPI (KPI ) for cable access networks . 18
EP
5.1.2 Objective KPIs . 19
5.1.2.1 Energy consumption (KPI ) . 19
EC,NIU
5.1.2.2 Task efficiency (KPI ) . 19
TE
5.1.2.3 Energy re-use (KPI ) . 19
REUSE
5.1.2.4 Renewable energy (KPI ) . 19
REN
5.2 Scale . 20
5.3 Evolution . 20
5.4 Definition of boundaries . 20
5.5 Formulae. 20
5.5.1 Global KPI (KPI ) for cable access networks . 20
EP
5.5.1.1 General . 20
5.5.1.2 Definition of terms . 20
5.5.2 Objective KPIs for cable access networks . 20
5.5.2.1 Energy consumption (KPI ) for DOCSIS 3.0 . 20
EC,NIU
5.5.2.1.1 Formula . 20
5.5.2.1.2 Definitions of terms . 20
5.5.2.2 Energy consumption (KPI ) for DOCSIS 3.1 . 21
EC,NIU
5.5.2.2.1 Formula . 21
5.5.3 Data_volume (data_volume) . 21
5.5.3.1 General . 21
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 305 200-4-4 V1.1.1 (2018-04)
5.5.3.2 Data_volume (D ) for DOCSIS 3.0 . 21
NIU
5.5.3.2.1 General . 21
5.5.3.2.2 Formula . 21
5.5.3.2.3 Definitions of terms . 22
5.5.3.3 Data_volume (D ) for DOCSIS 3.1 . 22
NIU
5.5.3.3.1 General . 22
5.5.3.3.2 Formula . 22
5.6 Reporting . 23
Annex A (informative): History of network schematics . 24
Annex B (informative): DOCSIS 3.0 data rates (downstream/upstream) . 25
Annex C (informative): DOCSIS 3.0 Use Case Sample Calculation of KPI . 26
EP
History . 28
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 305 200-4-4 V1.1.1 (2018-04)
List of figures
Figure 1: Updated schematic of fixed and mobile communication networks .13
Figure 2: Schematic of cable access network technologies .14
Figure 3: Schematic of cable access network energy consumption .15
Figure A.1: Schematic of fixed and mobile communication networks (June 2011) .24
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 305 200-4-4 V1.1.1 (2018-04)
List of tables
Table B.1: Available data rates for a DVB-C system (in Mb/s) .25
Table B.2: Data rates for DOCSIS US channels (in Mb/s) .25
Table C.1: Example of DOCSIS 3.0 calculation of KPI .27
EP
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 305 200-4-4 V1.1.1 (2018-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Integrated broadband cable
telecommunication networks (CABLE).
The present document is part 4, sub-part 4 of a multi-part deliverable covering Global Key Performance Indicators for
energy management of operational broadband deployment infrastructures as identified below:
Part 1: "General requirements";
Part 2: "Specific requirements";
Part 3: "ICT sites";
Part 4: "Design assessments";
Sub-part 4: "Cable Access Networks".
National transposition dates
Date of adoption of this EN: 24 April 2018
Date of latest announcement of this EN (doa): 31 July 2018
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2019
Date of withdrawal of any conflicting National Standard (dow): 31 January 2019
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 305 200-4-4 V1.1.1 (2018-04)
Introduction
Energy costs continue to rise, a trend that will continue in the future, while broadband penetration is introducing new
active equipment to the network architecture. In this context, and to reflect other environmental aspects of
sustainability, it is vital that the main telecommunication operators implement effective general engineering of fixed
and mobile broadband networks and sites provisioning, managing or using those networks (i.e. ICT sites) in order to
respond to critical issues of energy consumption while proposing essential solutions to true broadband deployment. To
guide this process, it is essential that metrics are defined, termed Global Key Performance Indicators (KPIs), that enable
energy usage to be managed more effectively.
The Global Key Performance Indicators of the ETSI EN 305 200 [i.4] series address operational infrastructures and do
not consider design/operation of components of broadband deployment networks.
The ETSI EN 305 200 series of standards [i.4] comprises:
• ETSI EN 305 200-1 [i.5]: a generic requirements document addressing Global KPIs for operational
infrastructures;
• a sub-series ETSI EN 305 200-2 that defines the Global KPIs, and drives energy management targets, for
specific operational networks and sites and which describes how the Global KPIs are to be applied (which may
be used to support future regulatory objectives):
- ETSI EN 305 200-2-1 [i.6]: ICT sites;
- ETSI EN 305 200-2-2 [i.7]: Fixed broadband access networks;
NOTE: Excluding cable access networks.
- ETSI EN 305 200-2-3 [i.8]: Mobile broadband access networks;
The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain
information on values that have been used by certain organizations.
• a sub-series ETSI EN 305 200-3 [i.9] including ETSI EN 305 200-3-1 [i.10] that defines particular
implementations of Global KPIs within ICT sites based on the requirements of ETSI EN 305 200-2-1 [i.6], and
which may define levels of performance to simplify and provide clearer understanding of Global KPIs
allowing the evaluation of performance of energy use management in ICT sites;
The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain
information on values that have been used by certain organizations.
• a sub-series ETSI EN 305 200-4 including ETSI EN 305 200-4-4, the present document, that defines design
assessments of Global KPIs, and drives energy management targets, for specific operational networks and sites
and which describes how the Global KPIs are to be applied (which may be used to support future regulatory
objectives).
These standards may be considered to be a contribution to the application of ISO 50001 [i.11] in relation to the
development of policy for the continuous improvement of energy management and will accelerate:
• the availability of operational infrastructure architectures and network implementations that use energy more
efficiently;
• the definition and attainment objectives for other environmental aspects of sustainability for operational
broadband networks.
) and its
The present document specifies the requirements for a Global KPI for energy management (KPI
EM
underpinning Objective KPI for energy consumption for cable access networks of broadband deployment employing
DOCSIS 3.0 and/or DOCSIS 3.1.The requirements are mapped to the general requirements of ETSI EN 305 200-1 [i.5].
®
DOCSIS is a registered Trade Mark of Cable Television Laboratories, Inc., and is used in the present document with
permission.
ETSI
---------------------- Page: 8 ----------------------
9 ETSI EN 305 200-4-4 V1.1.1 (2018-04)
1 Scope
The present document specifies the requirements for a Global KPI for energy management (designated KPI ) and its
EP
underpinning Objective KPI for energy consumption addressing the following objectives for the cable operator access
networks of broadband deployment:
• energy consumption;
• renewable energy.
The requirements are mapped to the concepts of ETSI EN 305 200-1 [i.5].
Energy management of cable access networks comprises a number of independent layers. The present document
addresses performance of infrastructures that supports the normal function of hosted ICT equipment within the cable
access network (e.g. power distribution, environmental control, security and safety). The present document does not
address other layers such as performance of ICT equipment itself, performance of usage of available processing power,
and layers related to final service delivered (e.g. processing power required per itemized outcome) or overlay layers
(e.g. final energy required per itemized outcome).
The environmental impact and management of different energy sources are outside the scope of the present document.
Within the present document:
• clause 4 describes the energy parameters for cable access networks employing DOCSIS 3.0 and/or
DOCSIS 3.1 together with inclusions/exclusions of different energy sources;
• clause 5 specifies the requirements for measurement, calculation, classification and reporting of KPI .
EP
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
ETSI
---------------------- Page: 9 ----------------------
10 ETSI EN 305 200-4-4 V1.1.1 (2018-04)
[i.1] Commission Regulation (EC) No 801/2013 of 22 August 2013 amending Regulation (EC)
No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power
consumption of electrical and electronic household and office equipment, and amending
Regulation (EC) No 642/2009 with regard to ecodesign requirements for televisions.
NOTE: Available at http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2013:225:0001:0012:en:PDF.
[i.2] Commission Regulation (EC) No 1275/2008 of 17 December 2008 implementing Directive
2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements
for standby and off mode electric power consumption of electrical and electronic household and
office equipment.
NOTE: Available at http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2008:339:0045:0052:en:PDF.
[i.3] Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009
establishing a framework for the setting of ecodesign requirements for energy-related products
("Ecodesign Directive").
NOTE: Available at http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2009:285:0010:0035:en:PDF.
[i.4] ETSI EN 305 200 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs".
[i.5] ETSI EN 305 200-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 1: General requirements".
[i.6] ETSI EN 305 200-2-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 1:
ICT Sites".
[i.7] ETSI EN 305 200-2-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 2:
Fixed broadband access networks".
[i.8] ETSI EN 305 200-2-3: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 3:
Mobile broadband access networks".
[i.9] ETSI EN 305 200-3 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 3: ICT Sites".
[i.10] ETSI EN 305 200-3-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 3: ICT Sites; Sub-part 1: DCEM".
[i.11] ISO 50001: "Energy management systems - Requirements with guidance for use".
[i.12] ETSI EN 302 878-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Third
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
Part 1: General; DOCSIS 3.0".
[i.13] ETSI EN 302 878-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Third
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
Part 2: Physical Layer; DOCSIS 3.0".
[i.14] ETSI EN 302 878-3: "Access, Terminals, Transmission and Multiplexing (ATTM); Third
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
Part 3: Downstream Radio Frequency Interface; DOCSIS 3.0".
[i.15] ETSI EN 302 878-4: "Access, Terminals, Transmission and Multiplexing (ATTM); Third
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
Part 4: MAC and Upper Layer Protocols; DOCSIS 3.0".
[i.16] ETSI EN 302 878-5: "Access, Terminals, Transmission and Multiplexing (ATTM); Third
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
Part 5: Security Services; DOCSIS 3.0".
ETSI
---------------------- Page: 10 ----------------------
11 ETSI EN 305 200-4-4 V1.1.1 (2018-04)
[i.17] ETSI TS 103 311-1: "Integrated broadband cable telecommunication networks (CABLE); Fourth
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
®
Part 1: General; DOCSIS 3.1".
[i.18] ETSI TS 103 311-2: "Integrated broadband cable telecommunication networks (CABLE); Fourth
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
®
Part 2: Physical Layer; DOCSIS 3.1".
[i.19] ETSI TS 103 311-3: "Integrated broadband cable telecommunication networks (CABLE); Fourth
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
®
Part 3: MAC and Upper Layer Protocols Interface; DOCSIS 3.1".
[i.20] M/462 Standardisation mandate addressed to CEN, CENELEC and ETSI in the field of ICT to
enable efficient energy use in fixed and mobile information and communication networks.
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
cable access network: access network provided by cable operators comprising optical fibre and metallic cabling
providing direct connection to customer premises
Customer Premises (CP): any location which is the sole responsibility of the customer
energy consumption: total consumption of energy by an operational infrastructure
energy management: combination of reduced energy consumption and increased task effectiveness, re-use of energy
and use of renewable energy
Fibre Node (FN): device which performs a media conversion between an optical fibre cable link and a coaxial cable
link in a cable access network
global KPI: KPI, combining two or more Objective KPIs, which reflects the overall energy management performance
of an operational infrastructure
Head-End (HE): facility for receiving television signals for processing and distribution over a cable access network
ICT equipment: equipment providing data storage, processing and transport services
NOTE: A combination of Information Technology Equipment and Network Telecommunications Equipment.
ICT site: site containing structures or group of structures dedicated to the accommodation, interconnection and
operation of ICT equipment together with all the facilities and infrastructures for power distribution and environmental
...
Draft ETSI EN 305 200-4-4 V1.1.1 (2018-01)
EUROPEAN STANDARD
Integrated broadband cable
telecommunication networks (CABLE);
Energy management; Operational infrastructures; Global KPIs;
Part 4: Design assessments;
Sub-part 4: Cable Access Networks
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 305 200-4-4 V1.1.1 (2018-01)
Reference
DEN/CABLE-00022
Keywords
cable, energy efficiency
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 305 200-4-4 V1.1.1 (2018-01)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 11
3.1 Definitions . 11
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Energy management of cable access networks . 13
4.1 General . 13
4.1.1 Cable access networks . 13
4.1.2 Cable access network technologies . 14
4.1.2.1 General . 14
4.1.2.2 DOCSIS 3.0 . 14
4.1.2.3 DOCSIS 3.1 . 15
4.1.3 Energy consumption . 15
4.1.4 Data volume . 16
4.1.4.1 General . 16
4.1.4.2 DOCSIS 3.0 . 16
4.1.4.3 DOCSIS 3.1 . 16
4.2 Application of KPI . 17
EP
4.3 Related standards and regulations . 17
4.3.1 Standards . 17
4.3.1.1 DOCSIS 3.0 . 17
4.3.1.2 DOCSIS 3.1 . 18
4.3.2 Regulation . 18
5 Global KPI (KPI ) for cable access networks . 18
EP
5.1 General . 18
5.1.1 Global KPI (KPI ) for cable access networks . 18
EP
5.1.2 Objective KPIs . 19
5.1.2.1 Energy consumption (KPI ) . 19
EC,NIU
5.1.2.2 Task efficiency (KPI ) . 19
TE
5.1.2.3 Energy re-use (KPI ) . 19
REUSE
5.1.2.4 Renewable energy (KPI ) . 19
REN
5.2 Scale . 20
5.3 Evolution . 20
5.4 Definition of boundaries . 20
5.5 Formulae. 20
5.5.1 Global KPI (KPI ) for cable access networks . 20
EP
5.5.1.1 General . 20
5.5.1.2 Definition of terms . 20
5.5.2 Objective KPIs for cable access networks . 20
5.5.2.1 Energy consumption (KPI ) for DOCSIS 3.0 . 20
EC,NIU
5.5.2.1.1 Formula . 20
5.5.2.1.2 Definitions of terms . 21
5.5.2.2 Energy consumption (KPI ) for DOCSIS 3.1 . 21
EC,NIU
5.5.2.2.1 Formula . 21
5.5.3 Data_volume (data_volume) . 21
5.5.3.1 General . 21
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 305 200-4-4 V1.1.1 (2018-01)
5.5.3.2 Data_volume (D ) for DOCSIS 3.0 . 21
NIU
5.5.3.2.1 General . 21
5.5.3.2.2 Formula . 21
5.5.3.2.3 Definitions of terms . 22
5.5.3.3 Data_volume (D ) for DOCSIS 3.1 . 22
NIU
5.5.3.3.1 General . 22
5.5.3.3.2 Formula . 22
5.6 Reporting . 23
Annex A (informative): History of network schematics . 24
Annex B (informative): DOCSIS 3.0 data rates (downstream/upstream) . 25
Annex C (informative): DOCSIS 3.0 Use Case Sample Calculation of KPI . 26
EP
History . 28
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 305 200-4-4 V1.1.1 (2018-01)
List of figures
Figure 1: Updated schematic of fixed and mobile communication networks .13
Figure 2: Schematic of cable access network technologies .14
Figure 3: Schematic of cable access network energy consumption .15
Figure A.1: Schematic of fixed and mobile communication networks (June 2011) .24
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 305 200-4-4 V1.1.1 (2018-01)
List of tables
Table B.1: Available data rates for a DVB-C system (in Mb/s) .25
Table B.2: Data rates for DOCSIS US channels (in Mb/s) .25
Table C.1: Example of DOCSIS 3.0 calculation of KPI .27
EP
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 305 200-4-4 V1.1.1 (2018-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Integrated broadband cable
telecommunication networks (CABLE), and is now submitted for the combined Public Enquiry and Vote phase of the
ETSI standards EN Approval Procedure.
The present document is part 4, sub-part 4 of a multi-part deliverable covering Global Key Performance Indicators for
energy management of operational broadband deployment infrastructures as identified below:
Part 1: "General requirements";
Part 2: "Specific requirements";
Part 3: "ICT sites";
Part 4: "Design assessments";
Sub-part 4: Cable Access Networks".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 7 ----------------------
8 Draft ETSI EN 305 200-4-4 V1.1.1 (2018-01)
Introduction
Energy costs continue to rise, a trend that will continue in the future, while broadband penetration is introducing new
active equipment to the network architecture. In this context, and to reflect other environmental aspects of
sustainability, it is vital that the main telecommunication operators implement effective general engineering of fixed
and mobile broadband networks and sites provisioning, managing or using those networks (i.e. ICT sites) in order to
respond to critical issues of energy consumption while proposing essential solutions to true broadband deployment. To
guide this process, it is essential that metrics are defined, termed Global Key Performance Indicators (KPIs), that enable
energy usage to be managed more effectively.
The Global Key Performance Indicators of the ETSI EN 305 200 [i.4] series address operational infrastructures and do
not consider design/operation of components of broadband deployment networks.
The ETSI EN 305 200 series of standards [i.4] comprises:
• ETSI EN 305 200-1 [i.5]: a generic requirements document addressing Global KPIs for operational
infrastructures;
• a sub-series ETSI EN 305 200-2 that defines the Global KPIs, and drives energy management targets, for
specific operational networks and sites and which describes how the Global KPIs are to be applied (which may
be used to support future regulatory objectives):
- ETSI EN 305 200-2-1 [i.6]: ICT sites;
- ETSI EN 305 200-2-2 [i.7]: Fixed broadband access networks;
NOTE: Excluding cable access networks.
- ETSI EN 305 200-2-3 [i.8]: Mobile broadband access networks;
The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain
information on values that have been used by certain organizations.
• a sub-series ETSI EN 305 200-3 [i.9] including ETSI EN 305 200-3-1 [i.10] that defines particular
implementations of Global KPIs within ICT sites based on the requirements of ETSI EN 305 200-2-1 [i.6], and
which may define levels of performance to simplify and provide clearer understanding of Global KPIs
allowing the evaluation of performance of energy use management in ICT sites.
The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain
information on values that have been used by certain organizations.
• a sub-series ETSI EN 305 200-4 including ETSI EN 305 200-4-4, the present document, that defines design
assessments of Global KPIs, and drives energy management targets, for specific operational networks and sites
and which describes how the Global KPIs are to be applied (which may be used to support future regulatory
objectives).
These standards may be considered to be a contribution to the application of ISO 50001 [i.11] in relation to the
development of policy for the continuous improvement of energy management and will accelerate:
• the availability of operational infrastructure architectures and network implementations that use energy more
efficiently;
• the definition and attainment objectives for other environmental aspects of sustainability for operational
broadband networks.
) and its
The present document specifies the requirements for a Global KPI for energy management (KPI
EM
underpinning Objective KPI for energy consumption for cable access networks of broadband deployment employing
DOCSIS 3.0 and/or DOCSIS 3.1.The requirements are mapped to the general requirements of ETSI EN 305 200-1 [i.5].
®
DOCSIS is a registered Trade Mark of Cable Television Laboratories, Inc., and is used in the present document with
permission.
ETSI
---------------------- Page: 8 ----------------------
9 Draft ETSI EN 305 200-4-4 V1.1.1 (2018-01)
1 Scope
The present document specifies the requirements for a Global KPI for energy management (designated KPI ) and its
EP
underpinning Objective KPI for energy consumption addressing the following objectives for the cable operator access
networks of broadband deployment:
• energy consumption;
• renewable energy.
The requirements are mapped to the concepts of ETSI EN 305 200-1 [i.5].
Energy management of cable access networks comprises a number of independent layers. The present document
addresses performance of infrastructures that supports the normal function of hosted ICT equipment within the cable
access network (e.g. power distribution, environmental control, security and safety). The present document does not
address other layers such as performance of ICT equipment itself, performance of usage of available processing power,
and layers related to final service delivered (e.g. processing power required per itemized outcome) or overlay layers
(e.g. final energy required per itemized outcome).
The environmental impact and management of different energy sources are outside the scope of the present document.
Within the present document:
• clause 4 describes the energy parameters for cable access networks employing DOCSIS 3.0 and/or
DOCSIS 3.1 together with inclusions/exclusions of different energy sources;
• clause 5 specifies the requirements for measurement, calculation, classification and reporting of KPI .
EP
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
ETSI
---------------------- Page: 9 ----------------------
10 Draft ETSI EN 305 200-4-4 V1.1.1 (2018-01)
[i.1] Commission Regulation (EC) No 801/2013 of 22 August 2013 amending Regulation (EC)
No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power
consumption of electrical and electronic household and office equipment, and amending
Regulation (EC) No 642/2009 with regard to ecodesign requirements for televisions.
NOTE: Available at http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2013:225:0001:0012:en:PDF.
[i.2] Commission Regulation (EC) No 1275/2008 of 17 December 2008 implementing Directive
2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements
for standby and off mode electric power consumption of electrical and electronic household and
office equipment.
NOTE: Available at http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2008:339:0045:0052:en:PDF.
[i.3] Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009
establishing a framework for the setting of ecodesign requirements for energy-related products
("Ecodesign Directive").
NOTE: Available at http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2009:285:0010:0035:en:PDF.
[i.4] ETSI EN 305 200 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs".
[i.5] ETSI EN 305 200-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 1: General requirements".
[i.6] ETSI EN 305 200-2-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 1:
ICT Sites".
[i.7] ETSI EN 305 200-2-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 2:
Fixed broadband access networks".
[i.8] ETSI EN 305 200-2-3: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 3:
Mobile broadband access networks".
[i.9] ETSI EN 305 200-3 series: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 3: ICT Sites".
[i.10] ETSI EN 305 200-3-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Energy
management; Operational infrastructures; Global KPIs; Part 3: ICT Sites; Sub-part 1: DCEM".
[i.11] ISO 50001: "Energy management systems - Requirements with guidance for use".
[i.12] ETSI EN 302 878-1: "Access, Terminals, Transmission and Multiplexing (ATTM); Third
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
Part 1: General; DOCSIS 3.0".
[i.13] ETSI EN 302 878-2: "Access, Terminals, Transmission and Multiplexing (ATTM); Third
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
Part 2: Physical Layer; DOCSIS 3.0".
[i.14] ETSI EN 302 878-3: "Access, Terminals, Transmission and Multiplexing (ATTM); Third
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
Part 3: Downstream Radio Frequency Interface; DOCSIS 3.0".
[i.15] ETSI EN 302 878-4: "Access, Terminals, Transmission and Multiplexing (ATTM); Third
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
Part 4: MAC and Upper Layer Protocols; DOCSIS 3.0".
[i.16] ETSI EN 302 878-5: "Access, Terminals, Transmission and Multiplexing (ATTM); Third
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
Part 5: Security Services; DOCSIS 3.0".
ETSI
---------------------- Page: 10 ----------------------
11 Draft ETSI EN 305 200-4-4 V1.1.1 (2018-01)
[i.17] ETSI TS 103 311-1: "Integrated broadband cable telecommunication networks (CABLE); Fourth
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
®
Part 1: General; DOCSIS 3.1".
[i.18] ETSI TS 103 311-2: "Integrated broadband cable telecommunication networks (CABLE); Fourth
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
®
Part 2: Physical Layer; DOCSIS 3.1".
[i.19] ETSI TS 103 311-3: "Integrated broadband cable telecommunication networks (CABLE); Fourth
Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems;
®
Part 3: MAC and Upper Layer Protocols Interface; DOCSIS 3.1".
[i.20] M/462 Standardisation mandate addressed to CEN, CENELEC and ETSI in the field of ICT to
enable efficient energy use in fixed and mobile information and communication networks".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
cable access network: access network provided by cable operators comprising optical fibre and metallic cabling
providing direct connection to customer premises
Customer Premises (CP): any location which is the sole responsibility of the customer
energy consumption: total consumption of energy by an operational infrastructure
energy management: combination of reduced energy consumption and increased task effectiveness, re-use of energy
and use of renewable energy
Fibre Node (FN): device which performs a media conversion between an optical fibre cable link and a coaxial cable
link in a cable access network
global KPI: KPI, combining two or more Objective KPIs, which reflects the overall energy management performance
of an operational infrastructure
Head-End (HE): facility for receiving television signals for processing and distribution over a cable access network
ICT equipment: equipment providing data storage, processing and transport services
NOTE: A combination of Information Technology Equipment and Network Telecommunications Equipment.
ICT site: site containing structures or group of structures
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.