ETSI EN 319 412-1 V1.4.4 (2021-05)
Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures
Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures
REN/ESI-0019412-1v142
Elektronski podpisi in infrastruktura (ESI) - Profili digitalnih potrdil - 1. del: Pregled in skupne podatkovne strukture
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 319 412-1 V1.4.4:2021
01-julij-2021
Elektronski podpisi in infrastruktura (ESI) - Profili digitalnih potrdil - 1. del: Pregled
in skupne podatkovne strukture
Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 1: Overview
and common data structures
Ta slovenski standard je istoveten z: ETSI EN 319 412-1 V1.4.4 (2021-05)
ICS:
03.080.99 Druge storitve Other services
35.040.01 Kodiranje informacij na Information coding in general
splošno
SIST EN 319 412-1 V1.4.4:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 319 412-1 V1.4.4:2021
---------------------- Page: 2 ----------------------
SIST EN 319 412-1 V1.4.4:2021
ETSI EN 319 412-1 V1.4.4 (2021-05)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 1: Overview and common data structures
---------------------- Page: 3 ----------------------
SIST EN 319 412-1 V1.4.4:2021
2 ETSI EN 319 412-1 V1.4.4 (2021-05)
Reference
REN/ESI-0019412-1v142
Keywords
e-commerce, electronic signature, security,
trust services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 319 412-1 V1.4.4:2021
3 ETSI EN 319 412-1 V1.4.4 (2021-05)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 8
4 ETSI EN 319 412 certificate profiles . 8
4.1 General approach . 8
4.2 Overview of other parts of ETSI EN 319 412 . 8
4.2.1 ETSI EN 319 412-2 . 8
4.2.2 ETSI EN 319 412-3 . 8
4.2.3 ETSI EN 319 412-4 . 9
4.2.4 ETSI EN 319 412-5 . 9
5 Common data structures . 9
5.1 Semantics identifiers . 9
5.1.1 General . 9
5.1.2 ASN.1 module . 10
5.1.3 Natural person semantics identifier . 10
5.1.4 Legal person semantics identifier . 11
5.1.5 eIDAS Natural person semantics identifier . 12
5.1.6 eIDAS Legal person semantics identifier . 12
5.2 Certificate Extensions regarding Validity Assured Certificate . 12
5.2.1 Validity Assured General . 12
5.2.2 Validity Assured - Short Term . 13
5.2.3 ASN.1 Module . 13
Annex A (informative): Change History . 14
History . 15
ETSI
---------------------- Page: 5 ----------------------
SIST EN 319 412-1 V1.4.4:2021
4 ETSI EN 319 412-1 V1.4.4 (2021-05)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 1 of a multi-part deliverable covering the Certificate Profiles, as identified below:
Part 1: "Overview and common data structures";
Part 2: "Certificate profile for certificates issued to natural persons";
Part 3: "Certificate profile for certificates issued to legal persons";
Part 4: "Certificate profile for web site certificates";
Part 5: "QCStatements".
The present document was previously published as ETSI TS 119 412-1 [i.14].
National transposition dates
Date of adoption of this EN: 24 May 2021
Date of latest announcement of this EN (doa): 31 August 2021
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 28 February 2022
Date of withdrawal of any conflicting National Standard (dow): 28 February 2022
ETSI
---------------------- Page: 6 ----------------------
SIST EN 319 412-1 V1.4.4:2021
5 ETSI EN 319 412-1 V1.4.4 (2021-05)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
ITU and ISO issued standards for certification of public keys in Recommendation ITU X.509 | ISO/IEC 9594-8 [i.3]
which are used for the security of communications and data for a wide range of electronic applications.
Regulation (EU) No 910/2014 [i.9] of the European Parliament and of the Council of 23 July 2014 on electronic
identification and trust services for electronic transactions in the internal market and repealing Directive 1999/93/EC
defines requirements on specific types of certificates named "qualified certificates". Implementation of Directive
1999/93/EC [i.1], superseded by the Regulation (EU) No 910/2014 [i.9], and deployment of certificate infrastructures
throughout Europe as well as in countries outside of Europe, have resulted in a variety of certificate implementations for
use in public and closed environments, where some are declared as qualified certificates while others are not.
Applications need support from standardized and interoperable identity certificate profiles, in particular when
applications are used for electronic signatures, authentication and secure electronic exchange in open environments and
international trust scenarios, but also when certificates are used in local application contexts.
This multi-part deliverable aims to maximize the interoperability of systems issuing and using certificates both in the
European context under the Regulation (EU) No 910/2014 [i.9] and in the wider international environment.
ETSI
---------------------- Page: 7 ----------------------
SIST EN 319 412-1 V1.4.4:2021
6 ETSI EN 319 412-1 V1.4.4 (2021-05)
1 Scope
The present document provides an overview of the Recommendation ITU-T X.509 | ISO/IEC 9594-8 [i.3] based
certificate profiles and the statements for EU Qualified Certificates specified in other parts of ETSI EN 319 412 ([i.4] to
[i.7]). It specifies common data structures that are referenced from other parts of ETSI EN 319 412 ([i.4] to [i.7]).
The profiles specified in this multi-part deliverable aim to support both the Regulation (EU) No 910/2014 [i.9] and use
of certificates in a wider international context. Within the European context, it aims to support both EU Qualified
Certificates and other forms of certificate.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] IETF RFC 3739: "Internet X.509 Public Key Infrastructure: Qualified Certificates Profile".
[2] ISO 3166-1: "Codes for the representation of names of countries and their subdivisions--Part 1:
Country code".
[3] ETSI TS 119 495: "Electronic Signatures and Infrastructures (ESI); Sector Specific Requirements;
Qualified Certificate Profiles and TSP Policy Requirements under the payment services Directive
(EU) 2015/2366".
[4] ISO 17442: "Financial services - Legal Entity Identifier (LEI)".
[5] eIDAS: "SAML Attribute Profile v1.2", 31 August 2019.
NOTE: available at
https://ec.europa.eu/cefdigital/wiki/download/attachments/82773108/eIDAS%20SAML%20Attribute%20
Profile%20v1.2%20Final.pdf?version=2&modificationDate=1571068651772&api=v2.
[6] IETF RFC 5912: "New ASN.1 Modules for the Public Key Infrastructure Using X.509 (PKIX)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 1999/93/EC of the European Parliament and of the Council of 13 December 1999 on a
Community framework for electronic signatures.
ETSI
---------------------- Page: 8 ----------------------
SIST EN 319 412-1 V1.4.4:2021
7 ETSI EN 319 412-1 V1.4.4 (2021-05)
[i.2] ETSI EN 319 401: "Electronic Signatures and Infrastructures (ESI); General Policy Requirements
for Trust Service Providers".
[i.3] Recommendation ITU-T X.509 | ISO/IEC 9594-8: "Information technology - Open Systems
Interconnection - The Directory: Public-key and attribute certificate frameworks".
[i.4] ETSI EN 319 412-2: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 2:
Certificate Profile for certificates issued to natural persons".
[i.5] ETSI EN 319 412-3: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 3:
Certificate Profile for certificates issued to legal persons".
[i.6] ETSI EN 319 412-4: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 4:
Certificate Profile for web site certificates".
[i.7] ETSI EN 319 412-5: "Electronic Signatures and Infrastructures (ESI) ; Certificate Profiles; Part 5:
QCStatements".
[i.8] IETF RFC 5246: "The Transport Layer Security (TLS) Protocol Version 1.2".
[i.9] Regulation (EU) No 910/2014 of the European Parliament and of the Council of 23 July 2014 on
electronic identification and trust services for electronic transactions in the internal market and
repealing Directive 1999/93/EC.
[i.10] Recommendation ITU-T X.520 (10/2012): "Information technology - Open Systems
Interconnection - The Directory: Selected attribute types".
[i.11] IETF RFC 5280: "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation
List (CRL) Profile".
[i.12] Council Directive 2006/112/EC of 28 November 2006 on the common system of value added tax.
[i.13] Directive (EU) 2015/2366 of the European Parliament and of the Council of 25 November 2015 on
payment services in the internal market, amending Directives 2002/65/EC, 2009/110/EC and
2013/36/EU and Regulation (EU) No 1093/2010, and repealing Directive 2007/64/EC.
[i.14] ETSI TS 119 412-1: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1:
Overview and common data structures".
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 319 401 [i.2] and the following apply:
EU Qualified Certificate: qualified certificate that is stated to be in accordance with Annex I, III or IV of the
Regulation (EU) No 910/2014 [i.9] or annex I of the Directive 1999/93/EC [i.1] whichever is in f
...
ETSI EN 319 412-1 V1.4.4 (2021-05)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 1: Overview and common data structures
---------------------- Page: 1 ----------------------
2 ETSI EN 319 412-1 V1.4.4 (2021-05)
Reference
REN/ESI-0019412-1v142
Keywords
e-commerce, electronic signature, security,
trust services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 319 412-1 V1.4.4 (2021-05)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 8
4 ETSI EN 319 412 certificate profiles . 8
4.1 General approach . 8
4.2 Overview of other parts of ETSI EN 319 412 . 8
4.2.1 ETSI EN 319 412-2 . 8
4.2.2 ETSI EN 319 412-3 . 8
4.2.3 ETSI EN 319 412-4 . 9
4.2.4 ETSI EN 319 412-5 . 9
5 Common data structures . 9
5.1 Semantics identifiers . 9
5.1.1 General . 9
5.1.2 ASN.1 module . 10
5.1.3 Natural person semantics identifier . 10
5.1.4 Legal person semantics identifier . 11
5.1.5 eIDAS Natural person semantics identifier . 12
5.1.6 eIDAS Legal person semantics identifier . 12
5.2 Certificate Extensions regarding Validity Assured Certificate . 12
5.2.1 Validity Assured General . 12
5.2.2 Validity Assured - Short Term . 13
5.2.3 ASN.1 Module . 13
Annex A (informative): Change History . 14
History . 15
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 319 412-1 V1.4.4 (2021-05)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 1 of a multi-part deliverable covering the Certificate Profiles, as identified below:
Part 1: "Overview and common data structures";
Part 2: "Certificate profile for certificates issued to natural persons";
Part 3: "Certificate profile for certificates issued to legal persons";
Part 4: "Certificate profile for web site certificates";
Part 5: "QCStatements".
The present document was previously published as ETSI TS 119 412-1 [i.14].
National transposition dates
Date of adoption of this EN: 24 May 2021
Date of latest announcement of this EN (doa): 31 August 2021
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 28 February 2022
Date of withdrawal of any conflicting National Standard (dow): 28 February 2022
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 319 412-1 V1.4.4 (2021-05)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
ITU and ISO issued standards for certification of public keys in Recommendation ITU X.509 | ISO/IEC 9594-8 [i.3]
which are used for the security of communications and data for a wide range of electronic applications.
Regulation (EU) No 910/2014 [i.9] of the European Parliament and of the Council of 23 July 2014 on electronic
identification and trust services for electronic transactions in the internal market and repealing Directive 1999/93/EC
defines requirements on specific types of certificates named "qualified certificates". Implementation of Directive
1999/93/EC [i.1], superseded by the Regulation (EU) No 910/2014 [i.9], and deployment of certificate infrastructures
throughout Europe as well as in countries outside of Europe, have resulted in a variety of certificate implementations for
use in public and closed environments, where some are declared as qualified certificates while others are not.
Applications need support from standardized and interoperable identity certificate profiles, in particular when
applications are used for electronic signatures, authentication and secure electronic exchange in open environments and
international trust scenarios, but also when certificates are used in local application contexts.
This multi-part deliverable aims to maximize the interoperability of systems issuing and using certificates both in the
European context under the Regulation (EU) No 910/2014 [i.9] and in the wider international environment.
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 319 412-1 V1.4.4 (2021-05)
1 Scope
The present document provides an overview of the Recommendation ITU-T X.509 | ISO/IEC 9594-8 [i.3] based
certificate profiles and the statements for EU Qualified Certificates specified in other parts of ETSI EN 319 412 ([i.4] to
[i.7]). It specifies common data structures that are referenced from other parts of ETSI EN 319 412 ([i.4] to [i.7]).
The profiles specified in this multi-part deliverable aim to support both the Regulation (EU) No 910/2014 [i.9] and use
of certificates in a wider international context. Within the European context, it aims to support both EU Qualified
Certificates and other forms of certificate.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] IETF RFC 3739: "Internet X.509 Public Key Infrastructure: Qualified Certificates Profile".
[2] ISO 3166-1: "Codes for the representation of names of countries and their subdivisions--Part 1:
Country code".
[3] ETSI TS 119 495: "Electronic Signatures and Infrastructures (ESI); Sector Specific Requirements;
Qualified Certificate Profiles and TSP Policy Requirements under the payment services Directive
(EU) 2015/2366".
[4] ISO 17442: "Financial services - Legal Entity Identifier (LEI)".
[5] eIDAS: "SAML Attribute Profile v1.2", 31 August 2019.
NOTE: available at
https://ec.europa.eu/cefdigital/wiki/download/attachments/82773108/eIDAS%20SAML%20Attribute%20
Profile%20v1.2%20Final.pdf?version=2&modificationDate=1571068651772&api=v2.
[6] IETF RFC 5912: "New ASN.1 Modules for the Public Key Infrastructure Using X.509 (PKIX)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 1999/93/EC of the European Parliament and of the Council of 13 December 1999 on a
Community framework for electronic signatures.
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 319 412-1 V1.4.4 (2021-05)
[i.2] ETSI EN 319 401: "Electronic Signatures and Infrastructures (ESI); General Policy Requirements
for Trust Service Providers".
[i.3] Recommendation ITU-T X.509 | ISO/IEC 9594-8: "Information technology - Open Systems
Interconnection - The Directory: Public-key and attribute certificate frameworks".
[i.4] ETSI EN 319 412-2: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 2:
Certificate Profile for certificates issued to natural persons".
[i.5] ETSI EN 319 412-3: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 3:
Certificate Profile for certificates issued to legal persons".
[i.6] ETSI EN 319 412-4: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 4:
Certificate Profile for web site certificates".
[i.7] ETSI EN 319 412-5: "Electronic Signatures and Infrastructures (ESI) ; Certificate Profiles; Part 5:
QCStatements".
[i.8] IETF RFC 5246: "The Transport Layer Security (TLS) Protocol Version 1.2".
[i.9] Regulation (EU) No 910/2014 of the European Parliament and of the Council of 23 July 2014 on
electronic identification and trust services for electronic transactions in the internal market and
repealing Directive 1999/93/EC.
[i.10] Recommendation ITU-T X.520 (10/2012): "Information technology - Open Systems
Interconnection - The Directory: Selected attribute types".
[i.11] IETF RFC 5280: "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation
List (CRL) Profile".
[i.12] Council Directive 2006/112/EC of 28 November 2006 on the common system of value added tax.
[i.13] Directive (EU) 2015/2366 of the European Parliament and of the Council of 25 November 2015 on
payment services in the internal market, amending Directives 2002/65/EC, 2009/110/EC and
2013/36/EU and Regulation (EU) No 1093/2010, and repealing Directive 2007/64/EC.
[i.14] ETSI TS 119 412-1: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1:
Overview and common data structures".
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 319 401 [i.2] and the following apply:
EU Qualified Certificate: qualified certificate that is stated to be in accordance with Annex I, III or IV of the
Regulation (EU) No 910/2014 [i.9] or annex I of the Directive 1999/93/EC [i.1] whichever is in force at the time of
issuance
short-term certificate: certificate whose validity period, i.e. the period of time from notBefore through notAfter,
inclusive, is shorter than the maximum time to process a revocation request as specified in the certificate practice
statement
3.2 Symbols
Void.
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 31
...
SLOVENSKI STANDARD
SIST EN 319 412-1 V1.4.4:2021
01-julij-2021
Elektronski podpisi in infrastruktura (ESI) - Profili potrdil - 1. del: Pregled in
skupne podatkovne strukture
Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 1: Overview
and common data structures
Ta slovenski standard je istoveten z: ETSI EN 319 412-1 V1.4.4 (2021-05)
ICS:
03.080.99 Druge storitve Other services
35.040.01 Kodiranje informacij na Information coding in general
splošno
SIST EN 319 412-1 V1.4.4:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 319 412-1 V1.4.4:2021
---------------------- Page: 2 ----------------------
SIST EN 319 412-1 V1.4.4:2021
ETSI EN 319 412-1 V1.4.4 (2021-05)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 1: Overview and common data structures
---------------------- Page: 3 ----------------------
SIST EN 319 412-1 V1.4.4:2021
2 ETSI EN 319 412-1 V1.4.4 (2021-05)
Reference
REN/ESI-0019412-1v142
Keywords
e-commerce, electronic signature, security,
trust services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 319 412-1 V1.4.4:2021
3 ETSI EN 319 412-1 V1.4.4 (2021-05)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 8
4 ETSI EN 319 412 certificate profiles . 8
4.1 General approach . 8
4.2 Overview of other parts of ETSI EN 319 412 . 8
4.2.1 ETSI EN 319 412-2 . 8
4.2.2 ETSI EN 319 412-3 . 8
4.2.3 ETSI EN 319 412-4 . 9
4.2.4 ETSI EN 319 412-5 . 9
5 Common data structures . 9
5.1 Semantics identifiers . 9
5.1.1 General . 9
5.1.2 ASN.1 module . 10
5.1.3 Natural person semantics identifier . 10
5.1.4 Legal person semantics identifier . 11
5.1.5 eIDAS Natural person semantics identifier . 12
5.1.6 eIDAS Legal person semantics identifier . 12
5.2 Certificate Extensions regarding Validity Assured Certificate . 12
5.2.1 Validity Assured General . 12
5.2.2 Validity Assured - Short Term . 13
5.2.3 ASN.1 Module . 13
Annex A (informative): Change History . 14
History . 15
ETSI
---------------------- Page: 5 ----------------------
SIST EN 319 412-1 V1.4.4:2021
4 ETSI EN 319 412-1 V1.4.4 (2021-05)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 1 of a multi-part deliverable covering the Certificate Profiles, as identified below:
Part 1: "Overview and common data structures";
Part 2: "Certificate profile for certificates issued to natural persons";
Part 3: "Certificate profile for certificates issued to legal persons";
Part 4: "Certificate profile for web site certificates";
Part 5: "QCStatements".
The present document was previously published as ETSI TS 119 412-1 [i.14].
National transposition dates
Date of adoption of this EN: 24 May 2021
Date of latest announcement of this EN (doa): 31 August 2021
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 28 February 2022
Date of withdrawal of any conflicting National Standard (dow): 28 February 2022
ETSI
---------------------- Page: 6 ----------------------
SIST EN 319 412-1 V1.4.4:2021
5 ETSI EN 319 412-1 V1.4.4 (2021-05)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
ITU and ISO issued standards for certification of public keys in Recommendation ITU X.509 | ISO/IEC 9594-8 [i.3]
which are used for the security of communications and data for a wide range of electronic applications.
Regulation (EU) No 910/2014 [i.9] of the European Parliament and of the Council of 23 July 2014 on electronic
identification and trust services for electronic transactions in the internal market and repealing Directive 1999/93/EC
defines requirements on specific types of certificates named "qualified certificates". Implementation of Directive
1999/93/EC [i.1], superseded by the Regulation (EU) No 910/2014 [i.9], and deployment of certificate infrastructures
throughout Europe as well as in countries outside of Europe, have resulted in a variety of certificate implementations for
use in public and closed environments, where some are declared as qualified certificates while others are not.
Applications need support from standardized and interoperable identity certificate profiles, in particular when
applications are used for electronic signatures, authentication and secure electronic exchange in open environments and
international trust scenarios, but also when certificates are used in local application contexts.
This multi-part deliverable aims to maximize the interoperability of systems issuing and using certificates both in the
European context under the Regulation (EU) No 910/2014 [i.9] and in the wider international environment.
ETSI
---------------------- Page: 7 ----------------------
SIST EN 319 412-1 V1.4.4:2021
6 ETSI EN 319 412-1 V1.4.4 (2021-05)
1 Scope
The present document provides an overview of the Recommendation ITU-T X.509 | ISO/IEC 9594-8 [i.3] based
certificate profiles and the statements for EU Qualified Certificates specified in other parts of ETSI EN 319 412 ([i.4] to
[i.7]). It specifies common data structures that are referenced from other parts of ETSI EN 319 412 ([i.4] to [i.7]).
The profiles specified in this multi-part deliverable aim to support both the Regulation (EU) No 910/2014 [i.9] and use
of certificates in a wider international context. Within the European context, it aims to support both EU Qualified
Certificates and other forms of certificate.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] IETF RFC 3739: "Internet X.509 Public Key Infrastructure: Qualified Certificates Profile".
[2] ISO 3166-1: "Codes for the representation of names of countries and their subdivisions--Part 1:
Country code".
[3] ETSI TS 119 495: "Electronic Signatures and Infrastructures (ESI); Sector Specific Requirements;
Qualified Certificate Profiles and TSP Policy Requirements under the payment services Directive
(EU) 2015/2366".
[4] ISO 17442: "Financial services - Legal Entity Identifier (LEI)".
[5] eIDAS: "SAML Attribute Profile v1.2", 31 August 2019.
NOTE: available at
https://ec.europa.eu/cefdigital/wiki/download/attachments/82773108/eIDAS%20SAML%20Attribute%20
Profile%20v1.2%20Final.pdf?version=2&modificationDate=1571068651772&api=v2.
[6] IETF RFC 5912: "New ASN.1 Modules for the Public Key Infrastructure Using X.509 (PKIX)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 1999/93/EC of the European Parliament and of the Council of 13 December 1999 on a
Community framework for electronic signatures.
ETSI
---------------------- Page: 8 ----------------------
SIST EN 319 412-1 V1.4.4:2021
7 ETSI EN 319 412-1 V1.4.4 (2021-05)
[i.2] ETSI EN 319 401: "Electronic Signatures and Infrastructures (ESI); General Policy Requirements
for Trust Service Providers".
[i.3] Recommendation ITU-T X.509 | ISO/IEC 9594-8: "Information technology - Open Systems
Interconnection - The Directory: Public-key and attribute certificate frameworks".
[i.4] ETSI EN 319 412-2: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 2:
Certificate Profile for certificates issued to natural persons".
[i.5] ETSI EN 319 412-3: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 3:
Certificate Profile for certificates issued to legal persons".
[i.6] ETSI EN 319 412-4: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 4:
Certificate Profile for web site certificates".
[i.7] ETSI EN 319 412-5: "Electronic Signatures and Infrastructures (ESI) ; Certificate Profiles; Part 5:
QCStatements".
[i.8] IETF RFC 5246: "The Transport Layer Security (TLS) Protocol Version 1.2".
[i.9] Regulation (EU) No 910/2014 of the European Parliament and of the Council of 23 July 2014 on
electronic identification and trust services for electronic transactions in the internal market and
repealing Directive 1999/93/EC.
[i.10] Recommendation ITU-T X.520 (10/2012): "Information technology - Open Systems
Interconnection - The Directory: Selected attribute types".
[i.11] IETF RFC 5280: "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation
List (CRL) Profile".
[i.12] Council Directive 2006/112/EC of 28 November 2006 on the common system of value added tax.
[i.13] Directive (EU) 2015/2366 of the European Parliament and of the Council of 25 November 2015 on
payment services in the internal market, amending Directives 2002/65/EC, 2009/110/EC and
2013/36/EU and Regulation (EU) No 1093/2010, and repealing Directive 2007/64/EC.
[i.14] ETSI TS 119 412-1: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1:
Overview and common data structures".
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 319 401 [i.2] and the following apply:
EU Qualified Certificate: qualified certificate that is stated to be in accordance with Annex I, III or IV of the
Regulation (EU) No 910/2014 [i.9] or annex I of the Directive 1999/93/EC [i.1] whichever is in force
...
Final draft ETSI EN 319 412-1 V1.4.3 (2021-03)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 1: Overview and common data structures
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 319 412-1 V1.4.3 (2021-03)
Reference
REN/ESI-0019412-1v142
Keywords
e-commerce, electronic signature, security,
trust services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 319 412-1 V1.4.3 (2021-03)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 8
4 ETSI EN 319 412 certificate profiles . 8
4.1 General approach . 8
4.2 Overview of other parts of ETSI EN 319 412 . 8
4.2.1 ETSI EN 319 412-2 . 8
4.2.2 ETSI EN 319 412-3 . 8
4.2.3 ETSI EN 319 412-4 . 9
4.2.4 ETSI EN 319 412-5 . 9
5 Common data structures . 9
5.1 Semantics identifiers . 9
5.1.1 General . 9
5.1.2 ASN.1 module . 10
5.1.3 Natural person semantics identifier . 10
5.1.4 Legal person semantics identifier . 11
5.1.5 eIDAS Natural person semantics identifier . 12
5.1.6 eIDAS Legal person semantics identifier . 12
5.2 Certificate Extensions regarding Validity Assured Certificate . 12
5.2.1 Validity Assured General . 12
5.2.2 Validity Assured - Short Term . 13
5.2.3 ASN.1 Module . 13
Annex A (informative): Change History . 14
History . 15
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 319 412-1 V1.4.3 (2021-03)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This final draft European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI), and is now submitted for the Vote phase of the ETSI standards EN Approval Procedure.
The present document is part 1 of a multi-part deliverable covering the Certificate Profiles, as identified below:
Part 1: "Overview and common data structures";
Part 2: "Certificate profile for certificates issued to natural persons";
Part 3: "Certificate profile for certificates issued to legal persons";
Part 4: "Certificate profile for web site certificates";
Part 5: "QCStatements".
The present document was previously published as ETSI TS 119 412-1 [i.14].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 319 412-1 V1.4.3 (2021-03)
Introduction
ITU and ISO issued standards for certification of public keys in Recommendation ITU X.509 | ISO/IEC 9594-8 [i.3]
which are used for the security of communications and data for a wide range of electronic applications.
Regulation (EU) No 910/2014 [i.9] of the European Parliament and of the Council of 23 July 2014 on electronic
identification and trust services for electronic transactions in the internal market and repealing Directive 1999/93/EC
defines requirements on specific types of certificates named "qualified certificates". Implementation of Directive
1999/93/EC [i.1], superseded by the Regulation (EU) No 910/2014 [i.9], and deployment of certificate infrastructures
throughout Europe as well as in countries outside of Europe, have resulted in a variety of certificate implementations for
use in public and closed environments, where some are declared as qualified certificates while others are not.
Applications need support from standardized and interoperable identity certificate profiles, in particular when
applications are used for electronic signatures, authentication and secure electronic exchange in open environments and
international trust scenarios, but also when certificates are used in local application contexts.
This multi-part deliverable aims to maximize the interoperability of systems issuing and using certificates both in the
European context under the Regulation (EU) No 910/2014 [i.9] and in the wider international environment.
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 319 412-1 V1.4.3 (2021-03)
1 Scope
The present document provides an overview of the Recommendation ITU-T X.509 | ISO/IEC 9594-8 [i.3] based
certificate profiles and the statements for EU Qualified Certificates specified in other parts of ETSI EN 319 412 ([i.4] to
[i.7]). It specifies common data structures that are referenced from other parts of ETSI EN 319 412 ([i.4] to [i.7]).
The profiles specified in this multi-part deliverable aim to support both the Regulation (EU) No 910/2014 [i.9] and use
of certificates in a wider international context. Within the European context, it aims to support both EU Qualified
Certificates and other forms of certificate.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] IETF RFC 3739: "Internet X.509 Public Key Infrastructure: Qualified Certificates Profile".
[2] ISO 3166-1: "Codes for the representation of names of countries and their subdivisions--Part 1:
Country code".
[3] ETSI TS 119 495: "Electronic Signatures and Infrastructures (ESI); Sector Specific Requirements;
Qualified Certificate Profiles and TSP Policy Requirements under the payment services Directive
(EU) 2015/2366".
[4] ISO 17442: "Financial services - Legal Entity Identifier (LEI)".
[5] eIDAS: "SAML Attribute Profile v1.2", 31 August 2019.
NOTE: available at
https://ec.europa.eu/cefdigital/wiki/download/attachments/82773108/eIDAS%20SAML%20Attribute%20
Profile%20v1.2%20Final.pdf?version=2&modificationDate=1571068651772&api=v2.
[6] IETF RFC 5912: "New ASN.1 Modules for the Public Key Infrastructure Using X.509 (PKIX)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 1999/93/EC of the European Parliament and of the Council of 13 December 1999 on a
Community framework for electronic signatures.
ETSI
---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 319 412-1 V1.4.3 (2021-03)
[i.2] ETSI EN 319 401: "Electronic Signatures and Infrastructures (ESI); General Policy Requirements
for Trust Service Providers".
[i.3] Recommendation ITU-T X.509 | ISO/IEC 9594-8: "Information technology - Open Systems
Interconnection - The Directory: Public-key and attribute certificate frameworks".
[i.4] ETSI EN 319 412-2: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 2:
Certificate Profile for certificates issued to natural persons".
[i.5] ETSI EN 319 412-3: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 3:
Certificate Profile for certificates issued to legal persons".
[i.6] ETSI EN 319 412-4: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 4:
Certificate Profile for web site certificates".
[i.7] ETSI EN 319 412-5: "Electronic Signatures and Infrastructures (ESI) ; Certificate Profiles; Part 5:
QCStatements".
[i.8] IETF RFC 5246: "The Transport Layer Security (TLS) Protocol Version 1.2".
[i.9] Regulation (EU) No 910/2014 of the European Parliament and of the Council of 23 July 2014 on
electronic identification and trust services for electronic transactions in the internal market and
repealing Directive 1999/93/EC.
[i.10] Recommendation ITU-T X.520 (10/2012): "Information technology - Open Systems
Interconnection - The Directory: Selected attribute types".
[i.11] IETF RFC 5280: "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation
List (CRL) Profile".
[i.12] Council Directive 2006/112/EC of 28 November 2006 on the common system of value added tax.
[i.13] Directive (EU) 2015/2366 of the European Parliament and of the Council of 25 November 2015 on
payment services in the internal market, amending Directives 2002/65/EC, 2009/110/EC and
2013/36/EU and Regulation (EU) No 1093/2010, and repealing Directive 2007/64/EC.
[i.14] ETSI TS 119 412-1: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1:
Overview and common data structures".
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 319 401 [i.2] and the following apply:
EU Qualified Certificate: qualified certificate that is stated to be in accordance with Annex I, III or IV of the
Regulation (EU) No 910/2014 [i.9] or annex I of the Directive 1999/93/EC [i.1] whichever is in force at the time of
issuance
short-term certificate: certificate whose validity period, i.e. the period of time from notBefore through notAfter,
inclusive, is shorter than the maximum time to process a revocation request as specified in the certificate practice
statement
3.2 Symbols
Void.
ETSI
---------------------- Page: 7 ----------------------
8 Final draft ETSI EN 319 412-1 V1.4.3 (2021-03)
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ASN.1 Abstract Syntax Notation 1
CA Certification Authority
OID Object Identifier
LEI Legal Entity Identifier
SAML Security Assertion Markup Language
TLS Transport Layer Security protocol
NOTE: As specified in IETF RFC 5246 [i.8].
TSP Trust Service Provider
UN United Nations
4 ETSI EN 319 412 certificate
...
Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 1: Overview and common data structures
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
Reference
REN/ESI-0019412-1v142
Keywords
e-commerce, electronic signature, security,
trust services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 8
4 ETSI EN 319 412 certificate profiles . 8
4.1 General approach . 8
4.2 Overview of other parts of ETSI EN 319 412 . 8
4.2.1 ETSI EN 319 412-2 . 8
4.2.2 ETSI EN 319 412-3 . 8
4.2.3 ETSI EN 319 412-4 . 9
4.2.4 ETSI EN 319 412-5 . 9
5 Common data structures . 9
5.1 Semantics identifiers . 9
5.1.1 General . 9
5.1.2 ASN.1 module . 10
5.1.3 Natural person semantics identifier . 10
5.1.4 Legal person semantics identifier . 11
5.1.5 eIDAS Natural person semantics identifier . 12
5.1.6 eIDAS Legal person semantics identifier . 12
5.2 Certificate Extensions regarding Validity Assured Certificate . 12
5.2.1 Validity Assured General . 12
5.2.2 Validity Assured - Short Term . 13
5.2.3 ASN.1 Module . 13
Annex A (informative): Change History . 14
History . 15
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI standards EN
Approval Procedure.
The present document is part 1 of a multi-part deliverable covering the Certificate Profiles, as identified below:
Part 1: "Overview and common data structures";
Part 2: "Certificate profile for certificates issued to natural persons";
Part 3: "Certificate profile for certificates issued to legal persons";
Part 4: "Certificate profile for web site certificates";
Part 5: "QCStatements".
The present document was previously published as ETSI TS 119 412-1 [i.14].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
Introduction
ITU and ISO issued standards for certification of public keys in Recommendation ITU X.509 | ISO/IEC 9594-8 [i.3]
which are used for the security of communications and data for a wide range of electronic applications.
Regulation (EU) No 910/2014 [i.9] of the European Parliament and of the Council of 23 July 2014 on electronic
identification and trust services for electronic transactions in the internal market and repealing Directive
1999/93/EC [i.1] defines requirements on specific types of certificates named "qualified certificates". Implementation of
Directive 1999/93/EC [i.1], superseded by the Regulation (EU) No 910/2014 [i.9], and deployment of certificate
infrastructures throughout Europe as well as in countries outside of Europe, have resulted in a variety of certificate
implementations for use in public and closed environments, where some are declared as qualified certificates while
others are not.
Applications need support from standardized and interoperable identity certificate profiles, in particular when
applications are used for electronic signatures, authentication and secure electronic exchange in open environments and
international trust scenarios, but also when certificates are used in local application contexts.
This multi-part deliverable aims to maximize the interoperability of systems issuing and using certificates both in the
European context under the Regulation (EU) No 910/2014 [i.9] and in the wider international environment.
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
1 Scope
The present document provides an overview of the Recommendation ITU-T X.509 | ISO/IEC 9594-8 [i.3] based
certificate profiles and the statements for EU Qualified Certificates specified in other parts of ETSI EN 319 412 ([i.4] to
[i.7]). It specifies common data structures that are referenced from other parts of ETSI EN 319 412 ([i.4] to [i.7]).
The profiles specified in this multi-part deliverable aim to support both the Regulation (EU) No 910/2014 [i.9] and use
of certificates in a wider international context. Within the European context, it aims to support both EU Qualified
Certificates and other forms of certificate.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] IETF RFC 3739: "Internet X.509 Public Key Infrastructure: Qualified Certificates Profile".
[2] ISO 3166: "Codes for the representation of names of countries and their subdivisions".
[3] ETSI TS 119 495: "Electronic Signatures and Infrastructures (ESI); Sector Specific Requirements;
Qualified Certificate Profiles and TSP Policy Requirements under the payment services Directive
(EU) 2015/2366".
[4] ISO 17442: "Financial services -- Legal Entity Identifier (LEI)".
[5] eIDAS: "SAML Attribute Profile v1.2", 31 August 2019.
NOTE: Available at
https://ec.europa.eu/cefdigital/wiki/download/attachments/82773108/eIDAS%20SAML%20Attribute%20
Profile%20v1.2%20Final.pdf?version=2&modificationDate=1571068651772&api=v2.
[6] IETF RFC 5912: "New ASN.1 Modules for the Public Key Infrastructure Using X.509 (PKIX)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 1999/93/EC of the European Parliament and of the Council of 13 December 1999 on a
Community framework for electronic signatures.
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
[i.2] ETSI EN 319 401: "Electronic Signatures and Infrastructures (ESI); General Policy Requirements
for Trust Service Providers".
[i.3] Recommendation ITU-T X.509 | ISO/IEC 9594-8: "Information technology - Open Systems
Interconnection - The Directory: Public-key and attribute certificate frameworks".
[i.4] ETSI EN 319 412-2: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles;
Part 2: Certificate Profile for certificates issued to natural persons".
[i.5] ETSI EN 319 412-3: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles;
Part 3: Certificate Profile for certificates issued to legal persons".
[i.6] ETSI EN 319 412-4: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles;
Part 4: Certificate Profile for web site certificates".
[i.7] ETSI EN 319 412-5: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles;
Part 5: QCStatements".
[i.8] IETF RFC 5246: "The Transport Layer Security (TLS) Protocol Version 1.2".
[i.9] Regulation (EU) No 910/2014 of the European Parliament and of the Council of 23 July 2014 on
electronic identification and trust services for electronic transactions in the internal market and
repealing Directive 1999/93/EC.
[i.10] Recommendation ITU-T X.520 (10/2012): "Information technology - Open Systems
Interconnection - The Directory: Selected attribute types".
[i.11] IETF RFC 5280: "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation
List (CRL) Profile".
[i.12] Council Directive 2006/112/EC of 28 November 2006 on the common system of value added tax.
[i.13] Directive (EU) 2015/2366 of the European Parliament and of the Council of 25 November 2015 on
payment services in the internal market, amending Directives 2002/65/EC, 2009/110/EC and
2013/36/EU and Regulation (EU) No 1093/2010, and repealing Directive 2007/64/EC.
[i.14] ETSI TS 119 412-1: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1:
Overview and common data structures".
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 319 401 [i.2] and the following apply:
EU Qualified Certificate: qualified certificate that is stated to be in accordance with annex I, III or IV of the
Regulation (EU) No 910/2014 [i.9] or annex I of the Directive 1999/93/EC [i.1] whichever is in force at the time of
issuance
short-term certificate: certificate whose validity period, i.e. the period of time from notBefore through notAfter,
inclusive, is shorter than the maximum time to process a revocation request as specified in the certificate practice
statement
3.2 Symbols
Void.
ETSI
---------------------- Page: 7 ----------------------
8 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ASN.1 Abstract Syntax Notation 1
CA Certification Authority
OID Object IDentifier
LEI Legal Entity Identifier
SAML Security Assertion Markup Language
TLS Transport Layer Security protocol
NOTE: As specified in IETF RFC 5246 [i.8].
TSP Trust Service Prov
...
SLOVENSKI STANDARD
oSIST prEN 319 412-1 V1.4.2:2020
01-oktober-2020
Elektronski podpisi in infrastruktura (ESI) - Profili potrdil - 1. del: Pregled in
skupne podatkovne strukture
Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 1: Overview
and common data structures
Ta slovenski standard je istoveten z: ETSI EN 319 412-1 V1.4.2 (2020-07)
ICS:
03.080.99 Druge storitve Other services
35.040.01 Kodiranje informacij na Information coding in general
splošno
oSIST prEN 319 412-1 V1.4.2:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 319 412-1 V1.4.2:2020
---------------------- Page: 2 ----------------------
oSIST prEN 319 412-1 V1.4.2:2020
Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 1: Overview and common data structures
---------------------- Page: 3 ----------------------
oSIST prEN 319 412-1 V1.4.2:2020
2 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
Reference
REN/ESI-0019412-1v142
Keywords
e-commerce, electronic signature, security,
trust services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 319 412-1 V1.4.2:2020
3 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 8
4 ETSI EN 319 412 certificate profiles . 8
4.1 General approach . 8
4.2 Overview of other parts of ETSI EN 319 412 . 8
4.2.1 ETSI EN 319 412-2 . 8
4.2.2 ETSI EN 319 412-3 . 8
4.2.3 ETSI EN 319 412-4 . 9
4.2.4 ETSI EN 319 412-5 . 9
5 Common data structures . 9
5.1 Semantics identifiers . 9
5.1.1 General . 9
5.1.2 ASN.1 module . 10
5.1.3 Natural person semantics identifier . 10
5.1.4 Legal person semantics identifier . 11
5.1.5 eIDAS Natural person semantics identifier . 12
5.1.6 eIDAS Legal person semantics identifier . 12
5.2 Certificate Extensions regarding Validity Assured Certificate . 12
5.2.1 Validity Assured General . 12
5.2.2 Validity Assured - Short Term . 13
5.2.3 ASN.1 Module . 13
Annex A (informative): Change History . 14
History . 15
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 319 412-1 V1.4.2:2020
4 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI standards EN
Approval Procedure.
The present document is part 1 of a multi-part deliverable covering the Certificate Profiles, as identified below:
Part 1: "Overview and common data structures";
Part 2: "Certificate profile for certificates issued to natural persons";
Part 3: "Certificate profile for certificates issued to legal persons";
Part 4: "Certificate profile for web site certificates";
Part 5: "QCStatements".
The present document was previously published as ETSI TS 119 412-1 [i.14].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 319 412-1 V1.4.2:2020
5 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
Introduction
ITU and ISO issued standards for certification of public keys in Recommendation ITU X.509 | ISO/IEC 9594-8 [i.3]
which are used for the security of communications and data for a wide range of electronic applications.
Regulation (EU) No 910/2014 [i.9] of the European Parliament and of the Council of 23 July 2014 on electronic
identification and trust services for electronic transactions in the internal market and repealing Directive
1999/93/EC [i.1] defines requirements on specific types of certificates named "qualified certificates". Implementation of
Directive 1999/93/EC [i.1], superseded by the Regulation (EU) No 910/2014 [i.9], and deployment of certificate
infrastructures throughout Europe as well as in countries outside of Europe, have resulted in a variety of certificate
implementations for use in public and closed environments, where some are declared as qualified certificates while
others are not.
Applications need support from standardized and interoperable identity certificate profiles, in particular when
applications are used for electronic signatures, authentication and secure electronic exchange in open environments and
international trust scenarios, but also when certificates are used in local application contexts.
This multi-part deliverable aims to maximize the interoperability of systems issuing and using certificates both in the
European context under the Regulation (EU) No 910/2014 [i.9] and in the wider international environment.
ETSI
---------------------- Page: 7 ----------------------
oSIST prEN 319 412-1 V1.4.2:2020
6 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
1 Scope
The present document provides an overview of the Recommendation ITU-T X.509 | ISO/IEC 9594-8 [i.3] based
certificate profiles and the statements for EU Qualified Certificates specified in other parts of ETSI EN 319 412 ([i.4] to
[i.7]). It specifies common data structures that are referenced from other parts of ETSI EN 319 412 ([i.4] to [i.7]).
The profiles specified in this multi-part deliverable aim to support both the Regulation (EU) No 910/2014 [i.9] and use
of certificates in a wider international context. Within the European context, it aims to support both EU Qualified
Certificates and other forms of certificate.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] IETF RFC 3739: "Internet X.509 Public Key Infrastructure: Qualified Certificates Profile".
[2] ISO 3166: "Codes for the representation of names of countries and their subdivisions".
[3] ETSI TS 119 495: "Electronic Signatures and Infrastructures (ESI); Sector Specific Requirements;
Qualified Certificate Profiles and TSP Policy Requirements under the payment services Directive
(EU) 2015/2366".
[4] ISO 17442: "Financial services -- Legal Entity Identifier (LEI)".
[5] eIDAS: "SAML Attribute Profile v1.2", 31 August 2019.
NOTE: Available at
https://ec.europa.eu/cefdigital/wiki/download/attachments/82773108/eIDAS%20SAML%20Attribute%20
Profile%20v1.2%20Final.pdf?version=2&modificationDate=1571068651772&api=v2.
[6] IETF RFC 5912: "New ASN.1 Modules for the Public Key Infrastructure Using X.509 (PKIX)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 1999/93/EC of the European Parliament and of the Council of 13 December 1999 on a
Community framework for electronic signatures.
ETSI
---------------------- Page: 8 ----------------------
oSIST prEN 319 412-1 V1.4.2:2020
7 Draft ETSI EN 319 412-1 V1.4.2 (2020-07)
[i.2] ETSI EN 319 401: "Electronic Signatures and Infrastructures (ESI); General Policy Requirements
for Trust Service Providers".
[i.3] Recommendation ITU-T X.509 | ISO/IEC 9594-8: "Information technology - Open Systems
Interconnection - The Directory: Public-key and attribute certificate frameworks".
[i.4] ETSI EN 319 412-2: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles;
Part 2: Certificate Profile for certificates issued to natural persons".
[i.5] ETSI EN 319 412-3: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles;
Part 3: Certificate Profile for certificates issued to legal persons".
[i.6] ETSI EN 319 412-4: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles;
Part 4: Certificate Profile for web site certificates".
[i.7] ETSI EN 319 412-5: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles;
Part 5: QCStatements".
[i.8] IETF RFC 5246: "The Transport Layer Security (TLS) Protocol Version 1.2".
[i.9] Regulation (EU) No 910/2014 of the European Parliament and of the Council of 23 July 2014 on
electronic identification and trust services for electronic transactions in the internal market and
repealing Directive 1999/93/EC.
[i.10] Recommendation ITU-T X.520 (10/2012): "Information technology - Open Systems
Interconnection - The Directory: Selected attribute types".
[i.11] IETF RFC 5280: "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation
List (CRL) Profile".
[i.12] Council Directive 2006/112/EC of 28 November 2006 on the common system of value added tax.
[i.13] Directive (EU) 2015/2366 of the European Parliament and of the Council of 25 November 2015 on
payment services in the internal market, amending Directives 2002/65/EC, 2009/110/EC and
2013/36/EU and Regulation (EU) No 1093/2010, and repealing Directive 2007/64/EC.
[i.14] ETSI TS 119 412-1: "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1:
Overview and common data structures".
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 319 401 [i.2] and the following apply:
EU Qualified Certificate: qualified certificate that is stated to be in accordance with annex I, III or IV of the
Regulation (EU) No 910/2014 [i.9] or annex I of the Directive 1999/93/EC [i.1] whichever is in force at the time of
issuance
short-term certificate: certificate whose validity period, i.e. the period of time from notBefore through notAfter,
inclusive, is shorter than the maximum time to process a revocation request as specified in the certificate practice
statement
3.2 Symbols
Void.
ETSI
---------------------- Page: 9 ----------------------
oSIST prEN 319 412-1 V1.4.2:2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.