ETSI TS 102 593 V1.2.0 (2008-04)

Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); IPv6 Security; Conformance Test Suite Structure and Test Purposes (TSS&TP)

RTS/MTS-IPT-010[2]-IPv6-SecTSS

General Information

• Status: Published
• Publication Date: 21-Apr-2008
• Technical Committee: MTS IPT - IP Testing Group
• Current Stage: 12 - Completion
• Due Date: 19-May-2008
• Completion Date: 22-Apr-2008

Standards Content (Sample)

ETSI TS 102 593 V1.2.0 (2008-04)
Technical Specification


Methods for Testing and Specification (MTS);
Internet Protocol Testing (IPT);
IPv6 Security;
Conformance Test Suite Structure and
Test Purposes (TSS&TP)


�

---------------------- Page: 1 ----------------------
2 ETSI TS 102 593 V1.2.0 (2008-04)



Reference
RTS/MTS-IPT-010[2]-IPv6-SecTSS
Keywords
IP, IPv6, security, testing, TSS&TP, TTCN
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 593 V1.2.0 (2008-04)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.5
2 References.5
2.1 Normative references.5
2.2 Informative references.6
3 Definitions and abbreviations.6
3.1 Definitions.6
3.2 Abbreviations.6
4 Test Suite Structure (TSS).6
Annex A (normative): Test Purposes (TP).8
A.1 Authentication Header (AH) .8
A.2 Encapsulating Security Payload (ESP).11
A.3 Key Exchange (IKEv2) Protocol.17
A.3.1 Exchange Message Structures .17
A.3.2 IKE Header and Payload Formats .22
A.3.2.1 Configuration payload.22
A.3.2.2 IKE Error Types .23
A.3.3 IKE Informational Exchanges .25
A.3.4 IKE Protocol.26
A.3.4.1 Authentication.26
A.3.4.1.1 Extensible Authentication Methods.26
A.3.4.2 Error Handling.28
A.3.4.3 General Protocol Handling .31
A.3.4.3.1 Address and Port Agility.31
A.3.4.3.2 IP Compression (IPComp) .32
A.3.4.3.3 Message Format.32
A.3.4.3.4 Overlapping Requests.33
A.3.4.3.5 Request Internal Address.34
A.3.4.3.6 Retransmission Timers.34
A.3.4.3.7 Version Compatibility.36
A.3.4.4 Security Parameter Negotiation .40
A.3.4.4.1 Algorithm Negotiation.40
A.3.4.4.2 Cookies.42
A.3.4.4.3 Rekeying.42
A.3.4.4.4 Traffic Selector Negotiation.43
Annex B (informative): Bibliography.45
History .46

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 593 V1.2.0 (2008-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Methods for Testing and
Specification (MTS).
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 593 V1.2.0 (2008-04)
1 Scope
The purpose of the present document is to provide Test Suite Structure and Test Purposes (TSS&TP) for conformance
tests of the security IPv6 protocol based on the requirements defined in the IPv6 requirements catalogue
(TS 102 558 [2]) and written according to the guidelines of TS 102 351 [1], ISO/IEC 9646-2 [4] and ETS 300 406 [5].
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI TS 102 351: "Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT);
IPv6 Testing: Methodology and Framework".
[2] ETSI TS 102 558: "Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT):
IPv6 Security; Requirements Catalogue".
[3] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[4] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 2: Abstract Test Suite specification".
[5] ETSI ETS 300 406: "Methods for Testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 102 593 V1.2.0 (2008-04)
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
Not applicable.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
abstract test case: Refer to ISO/IEC 9646-1 [3].
Abstract Test Method (ATM): Refer to ISO/IEC 9646-1 [3].
Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 [3].
Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [3].
Lower Tester (LT): Refer to ISO/IEC 9646-1 [3].
Test Purpose (TP): Refer to ISO/IEC 9646-1 [3].
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AH Authentication Header
ATM Abstract Test Method
ATS Abstract Test Suite
ESP Encapsulating Security Payload
ICV Integrity Check Value
IETF Internet Engineering Task Force
IKE Internet Key Exchange
IPv6 Internet Protocol version 6
IUT Implementation Under Test
LT Lower Test
RC Requirements Catalogue
RQ Requirement
TP Test Purpose
TSS Test Suite Structure
UDP User Datagram Protocol
4 Test Suite Structure (TSS)
Test Purposes have been written for IPv6 mobile nodes, correspondent nodes and home agents according to the
Requirements (RQ) of the Requirements Catalogue (RC) in TS 102 558 [2]. Test purposes have been written for
behaviours requested with "MUST" or "SHOULD", optional behaviour described with "MAY" or similar wording
indicating an option has not been turned into test purposes.
The test purposes have been divided into three groups:
Group 1: Authentication Header (AH)
Group 2: Encapsulating Security Payload (ESP)
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 102 593 V1.2.0 (2008-04)
Group 3: Key Exchange (IKEv2) Protocol
The sub-grouping of these three groups follows the structure of the RC.
Group 1: Authentication Header (AH)
Group 2: Encapsulating Security Payload (ESP)
Group 3: Key Exchange (IKEv2) Protocol
Group 3.1 Exchange Message Structures
Group 3.2 IKE Header and Payload Formats
Group 3.2.1 Configuration payload
Group 3.2.2 IKE Error Types
Group 3.3 IKE Informational Exchanges
Group 3.4 IKE Protocol
Group 3.4.1 Authentication
Group 3.4.1.1 Extensible Authentication Methods
Group 3.4.2 Error Handling
Group 3.4.3 General Protocol Handling
Group 3.4.3.1 Address and Port Agility
Group 3.4.3.2 IP Compression (IPComp)
Group 3.4.3.3 Message Format
Group 3.4.3.4 Overlapping Requests
Group 3.4.3.5 Request Internal Address
Group 3.4.3.6 Retransmission Timers
Group 3.4.3.7 Version Compatibility
Group 3.4.4 Security Parameter Negotiation
Group 3.4.4.1 Algorithm Negotiation
Group 3.4.4.2 Cookies
Group 3.4.4.3 Rekeying
Group 3.4.4.4 Traffic Selector Negotiation
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 102 593 V1.2.0 (2008-04)
Annex A (normative):
Test Purposes (TP)
The test purposes have been written in the formal notation TPlan as described in annex A of TS 102 351 [1]. This
original textual output ASCII file (SEC.tplan) is contained in archive ts_102593v010102p0.zip which accompanies the
present document. The raw text file has been converted to a table format in this annex to allow better readability.
The two formats shall be considered equivalent. In the event that there appears to be syntactical or semantic differences
between the two then the textual TPlan representation takes precedence over the table format in this annex.
A.1 Authentication Header (AH)
Test Purpose
Identifier: TP_SEC_2000_01
Summary:
Test of generating first unicast IPv6 packets with Authentication Header
References: RQ_002_2000, RQ_002_2006, RQ_002_2011, RQ_002_2013, RQ_002_2015, RQ_002_2017,
RQ_002_2027, RQ_002_2032, RQ_002_2033, RQ_002_2034, RQ_002_2036
IUT Role: Test Case:
Ipsec_host TC_SEC_2000_01
with { IUT and destination_node established in an AH_security_association
   }
ensure that
   { when { IUT is requested to send first unicast IPv6Packet
         containing Authentication_Header }
    then { IUT sends IPv6Packet
         containing next_header_field of previous_header
           set to 51
       and containing (Authentication_Header
               containing Security_Parameters_Index
                 set to Security_Parameters_Index
                     received from destination_node
                     during SA_establishment
             and containing sequence_number set to 1
             and containing correctly calculated
                    Integrity_Check_Value
                    including necessary padding_bits) }
   }

Test Purpose
Identifier: TP_SEC_2000_02
Summary: Test of generating subsequent unicast IPv6 packets with Authentication Header
References:
RQ_002_2000, RQ_002_2006, RQ_002_2011, RQ_002_2012, RQ_002_2015, RQ_002_2017,
RQ_002_2027, RQ_002_2032, RQ_002_2033, RQ_002_2034, RQ_002_2036
IUT Role: Ipsec_host Test Case: TC_SEC_2000_02
with { IUT and destination_node established in an AH_security_association
   }
ensure that
   { when { IUT is requested to send subsequent unicast IPv6Packet
         containing Authentication_Header }
    then { IUT sends IPv6Packet
         containing next_header_field of previous_header
           set to 51
       and containing (Authentication_Header
               containing Security_Parameters_Index
                 set to Security_Parameters_Index
                     received from destination_node
                     during SA_establishment
             and containing sequence_number set to
               (sequence_number of previous IPv6Packet) plus 1
             and containing correctly calculated
                    Integrity_Check_Value
                    including necessary padding_bits) }
   }

ETSI

---------------------- Page: 8 ----------------------
9 ETSI TS 102 593 V1.2.0 (2008-04)
Test Purpose
Identifier: TP_SEC_2000_03
Summary: Test of generating first multicast IPv6 packets with Authentication Header
References: RQ_002_2000, RQ_002_2007, RQ_002_2011, RQ_002_2013, RQ_002_2015, RQ_002_2017,
RQ_002_2027, RQ_002_2032, RQ_002_2033, RQ_002_2034, RQ_002_2036
IUT Role: Ipsec_host Test Case: TC_SEC_2000_03
with { IUT established in a multicast_group AH_Security_Association
   }
ensure that
   { when { IUT is requested to send first multicast IPv6Packet
         containing Authentication_Header }
    then { IUT sends IPv6Packet
         containing next_header_field of previous_header
           set to 51
       and containing (Authentication_Header
               containing Security_Parameters_Index
                     assigned to multicast_group
                           Security_Association
             and containing sequence_number set to 1
             and containing correctly calculated
                     Integrity_Check_Value
                     including necessary padding_bits) }
   }

Test Purpose
Identifier: TP_SEC_2000_04
Summary: Test of generating subsequent multicast IPv6 packets with Authentication Header
References: RQ_002_2000, RQ_002_2007, RQ_002_2011, RQ_002_2012, RQ_002_2015, RQ_002_2017,
RQ_002_2027, RQ_002_2032, RQ_002_2033, RQ_002_2034, RQ_002_2036
IUT Role: Ipsec_host Test Case: TC_SEC_2000_04
with { IUT established in multicast_group AH_Security_Association
   }
ensure that
   { when { IUT is requested to send subsequent multicast IPv6Packet
         containing Authentication_Header }
    then { IUT sends IPv6Packet
         containing next_header_field of previous_header
           set to 51
       and containing (Authentication_Header
               containing Security_Parameters_Index
                 set to Security_Parameters_Index
                     assigned to multicast_group
                           Security_Association
             and containing sequence_number set to
               (sequence_number of previous IPv6Packet) plus 1
             and containing correctly calculated
                    Integrity_Check_Value
                    including necessary padding_bits) }
   }

Test Purpose
Identifier: TP_SEC_2009_01
Summary: Test reaction on IPv6 packets for unknown SA
References: RQ_002_2009
IUT Role: Ipsec_host Test Case: TC_SEC_2009_01
with { IUT established in AH_Security_Association
   }
ensure that
   { when { IUT receives IPv6Packet
         containing (Authentication_Header
               containing Security_Parameters_Index
                     unrelated to established
                     Security_Association) }
    then { IUT discards IPv6Packet }
   }

ETSI

---------------------- Page: 9 ----------------------
10 ETSI TS 102 593 V1.2.0 (2008-04)
Test Purpose
Identifier: TP_SEC_2042_01
Summary: Test reaction on IPv6 packets with AH header and fragmentation header
References: RQ_002_2042
IUT Role: Test Case:
Ipsec_host TC_SEC_2042_01
with { IUT and destination_node established in an AH_security_association
   }
ensure that
   { when { IUT receives IPv6Packet
         containing Authentication_Header
       and containing (Fragment_Header
               containing offset not set to 0) }
    then { IUT discards IPv6Packet }
   }

Test Purpose
Identifier: TP_SEC_2046_01
Summary: Test reaction on IPv6 packets with AH header when no SA exists
References: RQ_002_2046
IUT Role: Ipsec_host Test Case: TC_SEC_2046_01
with { IUT and destination_node not established in an AH_Security_Association
   }
ensure that
   { when { IUT receives IPv6Packet
         containing Authentication_Header }
    then { IUT discards IPv6Packet }
   }

Test Purpose
Identifier: TP_SEC_2053_01
Summary: Test reaction on IPv6 packets with AH header with incorrect sequence number
References: RQ_002_2053
IUT Role: Ipsec_host Test Case: TC_SEC_2053_01
with {   IUT and destination_node established in an AH_security_association
    and IUT and destination_node 'having already exchanged
                   at least one packet'
   }
ensure that
   { when { IUT receives IPv6Packet
         containing (Authentication_Header
               containing sequence_number
                 set to sequence_number received
                   in previous IPv6packet) }
    then { IUT discards IPv6Packet }
   }

Test Purpose
Identifier: TP_SEC_2057_01
Summary: Test reaction on IPv6 packets with AH header with correct ICV value
References: RQ_002_2057, RQ_002_2028
IUT Role: Test Case:
Ipsec_host TC_SEC_2057_01
with { IUT and destination_node established in an AH_security_association
   }
ensure that
   { when { IUT receives IPv6Packet
         containing (Authentication_Header
               containing Integrity_Check_Value
               calculated from Security_Association_data
                     and packet_contents) }
    then { IUT accepts IPv6Packet }
   }

ETSI

---------------------- Page: 10 ----------------------
11 ETSI TS 102 593 V1.2.0 (2008-04)
Test Purpose
Identifier: TP_SEC_2058_01
Summary: Test reaction on IPv6 packets with AH header with incorrect ICV value
References: RQ_002_2058, RQ_002_2028
IUT Role: Test Case:
Ipsec_host TC_SEC_2058_01
with { IUT and destination_node established in an AH_security_association
   }
ensure that
   { when { IUT receives IPv6Packet
         containing (Authentication_Header
               containing Integrity_Check_Value
               not calculated from Security_Association_data
                       and packet_contents) }
    then { IUT discards IPv6Packet }
   }

A.2 Encapsulating Security Payload (ESP)
Test Purpose
Identifier: TP_SEC_3030_01
Summary:
Test reaction on ESP dummy packet
References: RQ_002_3030
IUT Role: Ipsec_host Test Case: TC_SEC_3030_01
with { IUT and destination_node established in an ESP_Security_Association
   }
ensure that
   { when { IUT receives IPv6Packet
         containing (ESP_Header
               containing next_header_field set to 59) }
    then { IUT discards IPv6Packet }
   }

Test Purpose
Identifier: TP_SEC_3061_01
Summary: Test reaction on IPv6 packets with ESP header when no SA exists
References:
RQ_002_3061, RQ_002_3091
IUT Role: Ipsec_host Test Case: TC_SEC_3061_01
with { IUT 'has not established ESP Security Association with destination Node'
   }
ensure that
   { when { IUT receives IPv6Packet
         containing ESP_Header }
    then { IUT discards IPv6Packet }
   }

Test Purpose
Identifier: TP_SEC_3068_01
Summary: Test reaction on IPv6 packets with ESP header with correct ICV value
References: RQ_002_3068, RQ_002_3072
IUT Role: Test Case:
Ipsec_host TC_SEC_3068_01
with {   IUT and destination_node established in an ESP_Security_Association
    and IUT 'having enabled anti-replay service'
   }
ensure that
   { when { IUT receives IPv6Packet
         containing (ESP_Header
               containing sequence_number
               set to sequence_number from received IPv6Packet) }
    then { IUT discards IPv6Packet }
   }

ETSI

---------------------- Page: 11 ----------------------
12 ETSI TS 102 593 V1.2.0 (2008-04)
Test Purpose
Identifier: TP_SEC_3077_01
Summary: Test reaction on IPv6 packets with ESP header with correct ICV value
References: RQ_002_3077
IUT Role: Test Case:
Ipsec_host TC_SEC_3077_01
with {   IUT and destination_node established in an ESP_Security_Association
    and ESP_Security_Association configured to use
        combined_confidentiality_and_integrity_algorithms
   }
ensure that
   { when { IUT receives IPv6Packet
         containing (ESP_Header
               containing Integrity_Check_Value
               calculated from Security_Association_data
                     and packet_contents) }
    then { IUT accepts IPv6Packet }
   }

Test Purpose
Identifier: TP_SEC_3078_01
Summary: Test reaction on IPv6 packets with ESP header with incorrect ICV value
References: RQ_002_3078, RQ_002_3077
IUT Role: Ipsec_host Test Case: TC_SEC_3078_01
with {   IUT and destination_node established in an ESP_Security_Association
    and ESP_Security_Association configured to use
        combined_confidentiality_and_integrity_algorithms
   }
ensure that
   { when { IUT receives IPv6Packet
         containing (ESP_Header
               containing Integrity_Check_Value
               not calculated from Security_Association_data
                     and packet_contents) }
    then { IUT discards IPv6Packet }
   }

Test Purpose
Identifier: TP_SEC_3080_01
Summary: Test reaction on IPv6 packets with ESP header with correct ICV value
References: RQ_002_3080
IUT Role: Test Case:
Ipsec_host TC_SEC_3080_01
with {   IUT and destination_node established in an ESP_Security_Association
    and ESP_Security_Association configured to use
        separate_confidentiality_and_integrity_algorithms
   }
ensure that
   { when { IUT receives IPv6Packet
         containing (ESP_Header
               containing Integrity_Check_Value
               calculated from Security_Association_data
                     and packet_contents) }
    then { IUT accepts IPv6Packet }
   }

ETSI

---------------------- Page: 12 ----------------------
13 ETSI TS 102 593 V1.2.0 (2008-04)
Test Purpose
Identifier: TP_SEC_3083_01
Summary: Test reaction on IPv6 packets with ESP header with incorrect ICV value
References: RQ_002_3083, RQ_002_3080
IUT Role: Test Case:
Ipsec_host TC_SEC_3083_01
with {   IUT and destination_node established in an ESP_Security_Association
    and ESP_Security_Association configured to use
        separate_confidentiality_and_integrity_algorithms
   }
ensure that
   { when { IUT receives IPv6Packet
         containing (ESP_Header
               containing Integrity_Check_Value
               not calculated from Security_Association_data
                     and packet_contents) }
    then { IUT discards IPv6Packet }
   }

Test Purpose
Identifier: TP_SEC_3102_01
Summary: Test of g
...