ETSI EN 300 396-1 V1.2.1 (2011-12)

Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 1: General network design

REN/TETRA-08196

Prizemni snopovni radio (TETRA) - Tehnične zahteve za neposredni način delovanja (DMO) - 1. del: Splošna zasnova omrežja

Večdelni dokument EN 300 396 določa neposredni način delovanja (DMO) prizemnega snopovnega radia (TETRA)
Določa osnovni radijski vmesnik, medsebojno delovanje skupin neposrednega načina (DM) prek ponavljalnikov in medsebojno delovanje s sistemom prizemnega snopovnega radia, ki podpira govor in podatke (V+D), prek prehodov. Poleg osnovnih nosilnih in telekomunikacijskih storitev določa tudi varnostne vidike neposrednega načina delovanja prizemnega snopovnega radia in storitve, ki jih podpira.
Ta dokument se uporablja za splošno zasnovo omrežij za neposredni način delovanja prizemnega snopovnega radia na naslednji način:
• določa in opredeljuje referenčne točke vodovnega načina za mobilne postaje (MS), ponavljalnike in prehode do komutacijske in upravne infrastrukture (SwMI);
• določa in opredeljuje protokolarni sklad radijskega vmesnika, v katerem so navedene različne funkcije plasti in podplasti;
• določa in opredeljuje naslavljanje in identitete neposrednega načina delovanja prizemnega snopovnega radia ter njihovo organizacijo v skupine glede na različne funkcije;
• določa in opredeljuje funkcije, ki jih omogočajo vodovne telekomunikacijske storitve za govor in osnovne storitve za prenos podatkov;
• določa in opredeljuje značilne storitve za razširitev zmogljivosti nosilnih in telekomunikacijskih storitev v vodovnem načinu.
• določa in opredeljuje funkcije, povezane s prenosom kratkih podatkovnih sporočil.
OPOMBA: Če se pojavi neskladje med tem dokumentom in katerim koli drugim delom večdelnega dokumenta EN 300 396, ima prednost drugi del. Ta del se bo posodabljal tako pogosto, da se bo ohranila celovitost tega dokumenta kot celote.

General Information

• Status: Published
• Publication Date: 22-Dec-2011
• Technical Committee: TCCE 8 - TCCE Off-network services
• Current Stage: 12 - Completion
• Due Date: 05-Jan-2012
• Completion Date: 23-Dec-2011
• Mandate: T-172
• Ref Project: SIST EN 300 396-1 V1.2.1:2012 - Terrestrial Trunked Radio (TETRA) - Technical requirements for Direct Mode Operation (DMO) - Part 1: General network design

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 396-1 V1.2.1:2012
01-februar-2012
3UL]HPQLVQRSRYQLUDGLR7(75$7HKQLþQH]DKWHYH]DQHSRVUHGQLQDþLQ
GHORYDQMD'02GHO6SORãQD]DVQRYDRPUHåMD
Terrestrial Trunked Radio (TETRA) - Technical requirements for Direct Mode Operation
(DMO) - Part 1: General network design
Ta slovenski standard je istoveten z: EN 300 396-1 Version 1.2.1
ICS:
33.070.10 Prizemni snopovni radio Terrestrial Trunked Radio
(TETRA) (TETRA)
SIST EN 300 396-1 V1.2.1:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 396-1 V1.2.1:2012

---------------------- Page: 2 ----------------------

SIST EN 300 396-1 V1.2.1:2012
ETSI EN 300 396-1 V1.2.1 (2011-12)






European Standard
Terrestrial Trunked Radio (TETRA);
Technical requirements for Direct Mode Operation (DMO);
Part 1: General network design

---------------------- Page: 3 ----------------------

SIST EN 300 396-1 V1.2.1:2012
 2 ETSI EN 300 396-1 V1.2.1 (2011-12)



Reference
REN/TETRA-08196
Keywords
air interface, DMO, radio, TETRA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2011.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 396-1 V1.2.1:2012
 3 ETSI EN 300 396-1 V1.2.1 (2011-12)
Contents
Intellectual Property Rights . 6
Foreword . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 12
3.3 Abbreviations . 12
4 DMO reference points . . 13
5 Protocol architecture for DMO . 13
6 DM addressing and identities . 13
6.1 Introduction . 13
6.2 Mobile Network Identity (MNI) . 14
6.3 Subscriber identities . 15
6.3.1 General . 15
6.3.2 TETRA Subscriber Identity (TSI) . 15
6.3.3 Short Subscriber Identity (SSI) . 16
6.3.3A Open identities . 16
6.3.4 Installation of TSIs. 16
6.3.5 Use of subscriber identities . 16
6.4 DM repeater or gateway address . 17
6.4.1 Contents of DM repeater or gateway address . 17
6.4.2 Use of DM repeater or gateway address . 17
6.5 TETRA Equipment Identity (TEI) . 17
6.5.1 Contents of TEI . 17
6.5.2 Allocation principles for TEI . 17
6.6 Layer 2 addresses and labels . 18
6.6.1 DM colour code . 18
6.7 Use of TETRA addresses . 19
6.7.1 Air interface addressing functions . 19
6.7.2 Address placement in primitives and PDUs . 19
6.7.2.1 Use of addresses at layer 2 for direct MS-MS operation . 19
6.7.2.2 Use of TSI at layer 3 for direct MS-MS operation . 20
6.7.2.3 Use of addresses for DM repeater operation . 20
6.7.2.4 Use of addresses for DM gateway operation . 20
6.7.3 Address and identity comparison . 21
7 DM circuit mode teleservices and bearer services . 21
8 DM intrinsic services. 21
9 DM Short Data Service (SDS) . 21
Annex A (informative): DMO reference points . 22
A.1 Introduction . 22
A.2 Reference configuration . 22
A.2.1 Reference models . 22
A.2.1.1 Direct mode mobile station (DM-MS) . 23
A.2.1.2 Dual watch mobile station (DW-MS) . 23
A.2.1.3 Direct mode repeater (DM-REP) . 24
A.2.1.4 Direct mode gateway (DM-GATE) . 25
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 396-1 V1.2.1:2012
 4 ETSI EN 300 396-1 V1.2.1 (2011-12)
A.2.1.5 Direct mode repeater/gateway combination (DM-REP/GATE) . 25
A.3 TETRA DM access . . 26
A.3.1 DM-MS access . 26
A.3.2 MS functional groups . 26
A.3.3 Reference points . 27
Annex B (informative): Protocol architecture for DMO . 28
B.1 Introduction . 28
B.2 DM-MS protocol architecture . 28
B.2.1 Overview . 28
B.2.2 Air interface layer 1 . 29
B.2.3 Air interface layer 2 . 30
B.2.4 Air interface layer 3 . 31
B.2.4.1 Direct Mode Call Control (DMCC) entity . 31
B.2.4.1.1 Intrinsic services control . 31
B.2.4.1.2 Short Data Service (SDS) . 31
B.2.4.1.3 SDS-TL service . 31
B.2.4.2 DMMM entity (optional) . 32
B.2.5 Security management . 32
B.2.5.1 Identity management (authentication) . 32
B.2.5.2 Key management . 32
Annex C (informative): DM circuit mode teleservices and bearer services . 33
C.1 Service definitions . 33
C.1.1 Bearer service . 33
C.1.2 Teleservice . 33
C.1.3 Intrinsic service . 33
C.2 Services offered in TETRA DMO . 34
C.2.1 Direct Mode teleservices . 34
C.2.1.1 Individual call . 34
C.2.1.2 Group call . 35
C.2.1.3 SDS based teleservices . 35
C.2.2 Direct Mode bearer services . 35
C.2.2.1 Circuit mode unprotected bearer services . 35
C.2.2.2 Circuit mode protected bearer services . 35
C.2.2.3 Short Data Service (SDS) . 35
C.2.2.4 SDS-TL service . 36
C.2.3 Intrinsic services . 37
C.2.3.1 DM late entry . 37
C.2.3.2 Transmitting Party Number Identification (TPNI) . 37
C.2.3.3 Emergency calls . 37
Annex D (normative): TETRA type approval code information element . 38
D.1 Encoding of the TAC information element . 38
D.2 Application for the TAC value . 38
Annex E (normative): TETRA final assembly code information element . 41
E.1 Encoding of the FAC information element . 41
E.2 Application for the FAC value . 41
E.3 WEB page contents for FAC data base . 41
Annex F (normative): TETRA electronic serial number information element . 44
F.1 Encoding of the ESN information element . 44
F.2 Usage of the ESN . 44
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 396-1 V1.2.1:2012
 5 ETSI EN 300 396-1 V1.2.1 (2011-12)
F.3 Usage of check sum of the equipment identity . 44
Annex G (informative): Bibliography . 45
History . 46

ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 396-1 V1.2.1:2012
 6 ETSI EN 300 396-1 V1.2.1 (2011-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Terrestrial Trunked Radio (TETRA).
The present document is part 1 of a multi-part deliverable covering the Technical requirements for Direct Mode
Operation (DMO), as identified below:
Part 1: "General network design";
Part 2: "Radio aspects";
Part 3: "Mobile Station to Mobile Station (MS-MS) Air Interface (AI) protocol";
Part 4: "Type 1 repeater air interface";
Part 5: "Gateway air interface";
Part 6: "Security";
Part 7: "Type 2 repeater air interface"; (Historical)
Part 8: "Protocol Implementation Conformance Statement (PICS) proforma specification"; (Historical)
Part 10: "Managed Direct Mode Operation (M-DMO)". (Historical)
NOTE: Part 7, part 8 and part 10 of this multi-part deliverable are of status "historical" and will not be updated
according to this version of the standard.

National transposition dates
Date of adoption of this EN: 22 December 2011
Date of latest announcement of this EN (doa): 31 March 2012
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 September 2012
Date of withdrawal of any conflicting National Standard (dow): 30 September 2012

ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 396-1 V1.2.1:2012
 7 ETSI EN 300 396-1 V1.2.1 (2011-12)
1 Scope
The multi-part deliverable EN 300 396 defines the Terrestrial Trunked Radio (TETRA) Direct Mode Operation (DMO).
It specifies the basic air interface, the inter-working between Direct Mode (DM) groups via repeaters, and inter-working
with the TETRA Voice plus Data (V+D) system via gateways. It also specifies the security aspects in TETRA DMO,
and the intrinsic services that are supported in addition to the basic bearer services and teleservices.
The present document applies to the general network design of TETRA DMO as follows:
• it defines and specifies the circuit mode reference points for the Mobile Station (MS), repeater and gateway to
the Switching and Management Infrastructure (SwMI);
• it defines and specifies models of the air interface protocol stack where the different functions of layers and
sub-layers are listed;
• it defines and specifies the TETRA DMO addressing and identities and their organization in groups
corresponding to the different functions;
• it defines and specifies the functions provided by the circuit mode teleservices used for speech and basic
services used for data transfer;
• it defines and specifies the intrinsic services that extend the capabilities of the circuit mode bearer services and
teleservices;
• it defines and specifies the functions related to the transport of short data messages.
NOTE: If a discrepancy occurs between the present document and any other part of the EN 300 396 multi-part
deliverable, then the other part will take precedence. This part will be updated at a frequency consistent
with maintaining the integrity of the present document as a whole.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 392-2: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 2: Air
Interface (AI)".
[2] ETSI EN 300 396-2: "Terrestrial Trunked Radio (TETRA); Technical requirements for Direct
Mode Operation (DMO); Part 2: Radio aspects".
[3] ETSI EN 300 396-3: "Terrestrial Trunked Radio (TETRA); Technical Requirements for Direct
Mode Operation (DMO); Part 3: Mobile Station to Mobile Station (MS-MS) Air Interface (AI)
Protocol".
[4] ETSI EN 300 396-4: "Terrestrial Trunked Radio (TETRA); Technical Requirements for Direct
Mode Operation (DMO); Part 4: Type 1 repeater air interface".
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 396-1 V1.2.1:2012
 8 ETSI EN 300 396-1 V1.2.1 (2011-12)
[5] ETSI EN 300 396-5: "Terrestrial Trunked Radio (TETRA); Technical Requirements for Direct
Mode Operation (DMO); Part 5: Gateway air interface".
[6] ETSI EN 300 396-6: "Terrestrial Trunked Radio (TETRA); Technical Requirements for Direct
Mode Operation (DMO); Part 6: Security".
[7] ETSI EN 300 395-2: "Terrestrial Trunked Radio (TETRA); Speech codec for full-rate traffic
channel; Part 2: TETRA codec".
[8] ITU-T Recommendation E.218: "Management of the allocation of terrestrial trunk radio Mobile
Country Codes".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI Directives: "ETSI Statutes; ETSI Rules of Procedure; ETSI Board Working Procedures;
Powers and Functions of the Board; Terms of Reference of the Operational Co-ordination Group
(OCG); ETSI Technical Working Procedures; ETSI Drafting rules".
[i.2] ETSI EN 300 392-1: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D);
Part 1: General network design".
[i.3] Void.
[i.4] ETSI TR 102 300-5: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Designers'
guide; Part 5: Guidance on numbering and addressing".
[i.5] ETSI EG 202 118: "Services and Protocols for Advanced Networks (SPAN); The structure of the
TETRA numbering resource, interworking and high level policy for administration".
[i.6] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces - Reference configurations".
[i.7] ETSI EN 300 392-5: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct
Mode Operation (DMO); Part 5: Peripheral Equipment Interface (PEI)".
[i.8] ETSI TS 100 392-18-1: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct
Mode Operation (DMO); Part 18: Air interface optimized applications; Sub-part 1: Location
Information Protocol (LIP)".
[i.9] ETSI EN 300 396-7: "Terrestrial Trunked Radio (TETRA); Technical Requirements for Direct
Mode Operation (DMO); Part 7: Type 2 repeater air interface". (Historical).
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the ETSI Directives [i.1] and the following
apply:
Bit Error Ratio (BER): ratio of the bits wrongly received to all bits received in a given logical channel
call: complete sequence of related call transactions between DM-MSs
NOTE 1: There are two types of call, individual call or group call. An individual call is a complete sequence of
related call transactions between two DM-MSs. A group call is a complete sequence of related call
transactions involving two or more DM-MSs. The number of participants in a group call is not fixed.
Participants may join (late entry) and leave an ongoing call.
NOTE 2: For calls without presence check there is no guaranty that anyone is listening.
ETSI

---------------------- Page: 10 ----------------------

SIST EN 300 396-1 V1.2.1:2012
 9 ETSI EN 300 396-1 V1.2.1 (2011-12)
call transaction: all of the functions associated with a complete unidirectional transmission of information
NOTE: A call is made up of one or more sequential call transactions.
called user application: user application which receives an incoming call
calling user application: user application which initiates an outgoing call
Direct Mode Call Control (DMCC): layer 3 entity responsible for setting up and maintaining a call in DMO
Direct Mode GATEway (DM-GATE): device that provides gateway connectivity between a DM-MS(s) and the
TETRA TMO network
NOTE: The gateway provides the interface between TETRA DMO and TETRA TMO. A gateway may provide
only the gateway function (DM-GATE) or may provide the functions of both a DM repeater and a DM
gateway during a call (DM-REP/GATE).
Direct Mode Mobile Station (DM-MS): physical grouping that contains all of the mobile equipment that is used to
obtain TETRA DM services
NOTE: A DM-MS may have one of three roles:
master: if the DM-MS is either active in a call transaction transmitting traffic or control data, or is
reserving the channel by means of channel reservation signalling;
slave: if the DM-MS is receiving traffic and/or signalling in a call;
idle: if the DM-MS is not in a call.
Direct Mode Operation (DMO): mode of simplex operation where mobile subscriber radio units may communicate
using radio frequencies which may be monitored by, but which are outside the control of, the TETRA TMO network
NOTE: Direct Mode Operation is performed without intervention of any base station.
Direct Mode REPeater (DM-REP): device that operates in TETRA DM and provides a repeater function to enable
two or more DM-MSs to extend their coverage range
NOTE: It may be either a type 1 DM-REP, capable of supporting only a single call on the air interface, or a type 2
DM-REP, capable of supporting two calls on the air interface. A type 1 DM-REP may operate on either a
single RF carrier (type 1A DM-REP) or a pair of duplex-spaced RF carriers (type 1B DM-REP). A type 2
DM-REP [i.9] operates on a pair of duplex-spaced RF carriers.
DM channel: specific grouping of timeslots in the DM multiplex structure related to a particular DM RF carrier
(i.e. DM frequency)
NOTE: The grouping may not always be fixed, but in DMO when operating in frequency efficient mode as an
example, there are two DM channels, identified by the letters
...