ETSI ETS 300 185-2 ed.1 (1995-09)

Integrated Services Digital Network (ISDN); Conference call, add-on (CONF) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

DE/SPS-05028-J1

Digitalno omrežje z integriranimi storitvami (ISDN) - Dopolnilna storitev: konferenčni klic z dodajanjem (CONF) - Protokol digitalne naročniške signalizacije št. 1 (DSS1) - 2. del: Izjava o skladnosti izvedbe protokola (PICS) - Proforma specifikacije

General Information

• Status: Published
• Publication Date: 04-Sep-1995
• Technical Committee: SPS 5 - Digital access signalling
• Current Stage: 12 - Completion
• Due Date: 15-Sep-1995
• Completion Date: 05-Sep-1995
• Mandate: T-234B
• Ref Project: SIST ETS 300 185-2:1998 - Integrated Services Digital Network (ISDN); Conference call, add-on (CONF) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VWRULWHYVSHFLILNDFLMHIntegrated Services Digital Network (ISDN); Conference call, add-on (CONF) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:ETS 300 185-2 E13SIST ETS 300 185-2:1998en01-DSULO19983SIST ETS 300 185-2:1998SLOVENSKI
STANDARD



SIST ETS 300 185-2:1998



EUROPEANETS 300 185-2TELECOMMUNICATIONSeptember 1995STANDARDSource: ETSI TC-SPSReference: DE/SPS-05028-J1ICS:33.080Key words:ISDN, supplementary service, PICSIntegrated Services Digital Network (ISDN);Conference call, add-on (CONF) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS)proforma specificationETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail].: [phone] - Fax: [phone]Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1995. All rights reserved.SIST ETS 300 185-2:1998



Page 2ETS 300 185-2: September 1995Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Standards Approval Dept." at the address shown on the title page.SIST ETS 300 185-2:1998



Page 3ETS 300 185-2: September 1995ContentsForeword.51Scope.72Normative references.73Definitions.84Symbols and abbreviations.85Conformance.9Annex A (normative):PICS proforma.10A.1Instructions for completing the PICS proforma.10A.1.1Identification of the implementation.10A.1.2Global statement of conformance.10A.1.3Explanation of PICS proforma subclauses.10A.1.4Symbols, abbreviations and terms.11A.2Identification of the implementation.11A.2.1Implementation Under Test (IUT) identification.11A.2.2System Under Test (SUT) identification.11A.2.3Product supplier.12A.2.4Client.12A.2.5PICS contact person.13A.3PICS/System Conformance Statement (SCS).13A.4Identification of the protocol.13A.5Global statement of conformance.14A.6Roles.14A.7User.15A.7.1Major capabilities.15A.7.2Subsidiary capabilities.15A.7.3Protocol data units.15A.7.4Protocol data unit parameters.16A.7.5Timers.17A.7.6Call states.17A.8Network.18A.8.1Major capabilities.18A.8.2Subsidiary capabilities.18A.8.3Protocol data units.18A.8.4Protocol data unit parameters.19A.8.5Timers.20A.8.6Call states.20SIST ETS 300 185-2:1998



Page 4ETS 300 185-2: September 1995Annex B (normative):Requirements list.21B.1User.21B.1.1Requirements on items used in the basic call PICS.21B.1.2Requirements on items used in the generic functional protocol PICS.21B.1.3Requirements on items used in the supplementary service interactions PICS.22B.2Network.22B.2.1Requirements on items used in the basic call PICS.22B.2.2Requirements on items used in the generic functional protocol PICS.23B.2.3Requirements on items used in the supplementary service interactions PICS.24History.25SIST ETS 300 185-2:1998



Page 5ETS 300 185-2: September 1995ForewordThis European Telecommunication Standard (ETS) has been produced by the Signalling Protocols andSwitching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).This ETS is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. one(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) Conference call, add-on(CONF) supplementary service, as described below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the user";Part 5:"TSS&TP specification for the network";Part 6:"ATS and partial PIXIT proforma specification for the network".NOTE:The first part, ETS 300 185-1 (1993), containing the protocol specification, was initiallypublished as ETS 300 185 (1993) and has identical contents.To evaluate conformance of a particular implementation, it is necessary to have a statement of whichcapabilities and options have been implemented for a given Open Systems Interconnection (OSI)protocol. Such a statement is called a Protocol Implementation Conformance Statement (PICS).Transposition datesDate of adoption of this ETS:1 September 1995Date of latest announcement of this ETS (doa):31 December 1995Date of latest publication of new National Standardor endorsement of this ETS (dop/e):30 June 1996Date of withdrawal of any conflicting National Standard (dow):30 June 1996SIST ETS 300 185-2:1998



Page 6ETS 300 185-2: September 1995Blank pageSIST ETS 300 185-2:1998



Page 7ETS 300 185-2: September 19951ScopeThis second part of ETS 300 185 is applicable to the stage three of the Conference call, add-on (CONF)supplementary service for the pan-European Integrated Services Digital Network (ISDN) as provided byEuropean public telecommunications operators at the T reference point or coincident S and T referencepoint (as defined in ITU-T Recommendation I.411 [12]) by means of the Digital Subscriber SignallingSystem No. one (DSS1) protocol. Stage three identifies the protocol procedures and switching functionsneeded to support a telecommunications service (see CCITT Recommendation I.130 [11]).This ETS provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISDNDSS1 CONF supplementary service protocol as specified in ETS 300 185-1 [2] in compliance with therelevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [10].The supplier of a protocol implementation which is claimed to conform to ETS 300 185-1 [2] is required tocomplete a copy of the PICS proforma provided in annex A of this ETS and is required to provide theinformation necessary to identify both the supplier and the implementation.2Normative referencesThis ETS incorporates by dated and undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-networkinterface layer 3; Specifications for basic call control".[2]ETS 300 185-1 (1993): "Integrated Services Digital Network (ISDN); Conferencecall add-on (CONF) supplementary service; Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Part 1: Protocol specification".NOTE:ETS 300 185-1 (1993) was initially published as ETS 300 185 (1993).[3]ETS 300 195-2: "Integrated Services Digital Network (ISDN); Supplementaryservice interactions; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 2: Protocol Implementation Conformance Statement (PICS)proforma specification".[4]ETS 300 196-2: "Integrated Services Digital Network (ISDN); Generic functionalprotocol for the support of supplementary services; Digital Subscriber SignallingSystem No. one (DSS1) protocol; Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification".[5]I-ETS 300 314 (1994): "Integrated Services Digital Network (ISDN); DigitalSubscriber Signalling System No. one (DSS1); Protocol ImplementationConformance Statement (PICS) proforma specification for the network layersignalling protocol for circuit-mode basic call control (basic access, user)".[6]I-ETS 300 315 (1994): "Integrated Services Digital Network (ISDN); DigitalSubscriber Signalling System No. one (DSS1); Protocol ImplementationConformance Statement (PICS) proforma specification for the network layersignalling protocol for circuit-mode basic call control (primary rate access,user)".[7]I-ETS 300 316 (1994): "Integrated Services Digital Network (ISDN); DigitalSubscriber Signalling System No. one (DSS1); Protocol ImplementationConformance Statement (PICS) proforma specification for the network layersignalling protocol for circuit-mode basic call control (basic access, network)".SIST ETS 300 185-2:1998



Page 8ETS 300 185-2: September 1995[8]I-ETS 300 317 (1994): "Integrated Services Digital Network (ISDN); DigitalSubscriber Signalling System No. one (DSS1); Protocol ImplementationConformance Statement (PICS) proforma specification for the network layersignalling protocol for circuit-mode basic call control (primary rate access,network)".[9]ISO/IEC 9646-1: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 1: General concepts".[10]ISO/IEC 9646-7: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 7: ImplementationConformance Statements".[11]CCITT Recommendation I.130 (1988): "Method for the characterization oftelecommunication services supported by an ISDN and network capabilities ofan ISDN".[12]ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -Reference configurations".3DefinitionsFor the purposes of this ETS, the following definitions apply, in addition to those given inETS 300 185-1 [2]:Protocol Implementation Conformance Statement (PICS): A statement made by the supplier of anOpen Systems Interconnection (OSI) implementation or system, stating which capabilities have beenimplemented for a given OSI protocol (see ISO/IEC 9646-1 [9]).PICS proforma: A document, in the form of a questionnaire, designed by the protocol specifier orconformance test suite specifier, which, when completed for an OSI implementation or system, becomesthe PICS (see ISO/IEC 9646-1 [9]).static conformance review: A review of the extent to which the static conformance requirements are metby the IUT, accomplished by comparing the PICS with the static conformance requirements expressed inthe relevant standard(s) (see ISO/IEC 9646-1 [9]).4Symbols and abbreviationsFor the purposes of this ETS, the following abbreviations apply:ANDBoolean "and"CConditional requirement (to be observed if the relevant conditions apply)CONFConference call, add-onDSS1Digital Subscriber Signalling System No. oneIERInformation Elements ReceivedIETInformation Elements TransmittedISDNIntegrated Services Digital NetworkIUTImplementation Under TestMMandatory requirement (to be observed in all cases)MCMajor CapabilitiesMRMessages ReceivedMTMessages TransmittedN/ANot applicable, not supported or the conditions for status are not metNonot supportedNOTBoolean "not"SIST ETS 300 185-2:1998



Page 9ETS 300 185-2: September 1995OOption (may be selected to suit the implementation, provided that anyrequirements applicable to the option are observed)O.nOptions, but support required for either at least one or only one of the options inthe group labelled with the same numeral "n"ORBoolean "or"OSIOpen Systems InterconnectionPParametersPICSProtocol Implementation Conformance StatementRRolesRLRequirements ListSCSSystem Conformance StatementSSSupplementary ServiceSUTSystem Under TestYessupported5ConformanceA PICS proforma which conforms to this PICS proforma specification shall be technically equivalent toannex A, and shall preserve the numbering and ordering of the items in annex A.A PICS which conforms to this PICS proforma specification shall:a)describe an implementation which claims to conform to ETS 300 185-1 [2];b)be a conforming ICS proforma which has been completed in accordance with the instructions forcompletion given in clause A.1;c)include the information necessary to uniquely identify both the supplier and the implementation.SIST ETS 300 185-2:1998



Page 10ETS 300 185-2: September 1995Annex A (normative):PICS proformaNotwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants thatusers of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for itsintended purposes and may further publish the completed PICS.A.1Instructions for completing the PICS proformaA.1.1Identification of the implementationIdentification of the Implementation Under Test (IUT) and the system in which it resides (the SystemUnder Test (SUT)) should be filled in so as to provide as much detail as possible regarding versionnumbers and configuration options.The product supplier information and client information should both be filled in if they are different.A person who can answer queries regarding information supplied in the PICS should be named as thecontact person.The SCS as defined in ISO/IEC 9646-1 [9] is a document supplied by the client or product supplier thatsummarizes which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or otherstandards are implemented and to which conformance is claimed. The PICS/SCS subclause shoulddescribe the relationship of the PICS to the SCS.A.1.2Global statement of conformanceIf the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completedto facilitate selection of test cases for optional functions.If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed,and all non-supported mandatory capabilities should be identified and explained. Explanations may beentered in the comments field at the bottom of each table or on attached sheets of paper.A.1.3Explanation of PICS proforma subclausesThe PICS proforma contains a Roles clause and thereafter is presented in two parts (for user andnetwork) with the following subclauses, as required:-major capabilities;-subsidiary capabilities;-protocol data unit support;-protocol data unit parameters;-timers;-call states.The User clause shall only be completed for user implementations (including private networkimplementations) while the Network clause shall only be completed for network implementations. TheRoles subclause shall be completed for all implementations.The relationship between this PICS proforma and other related PICS proforma (e.g. the basic call PICSproforma) is expressed in the Requirements List (RL) contained in annex B. This provides the additionalrestrictions placed on the related proforma (different conditions, different status, etc.).SIST ETS 300 185-2:1998



Page 11ETS 300 185-2: September 1995A.1.4Symbols, abbreviations and termsThe PICS proforma contained in this annex is comprised of information in tabular form in accordance withthe guidelines presented in ISO/IEC 9646-7 [10].The reference column contained in the tables gives reference to the appropriate part(s) ofETS 300 185-1 [2] describing the particular item. Note, however, that a reference merely indicates theplace where the core of a description of an item can be found. Any additional information contained inETS 300 185-1 [2] has to be taken into account when making a statement about the conformance of thatparticular item.The following common notations, defined in ISO/IEC 9646-7 [10], are used for the status column:MmandatoryOoptionalN/Anot applicableO.for mutually exclusive or selectable options from a setThe following common notations, defined in ISO/IEC 9646-7 [10], are used for the support column:Yfor supported/implementedNfor not supported/not implementedA.2Identification of the implementationA.2.1Implementation Under Test (IUT) identificationIUT name:.IUT version:.A.2.2System Under Test (SUT) identificationSUT name:.Hardware configuration:.Operating system:.SIST ETS 300 185-2:1998



Page 12ETS 300 185-2: September 1995A.2.3Product supplierName:.Address:.Telephone number:.Facsimile number:.Additional information:.A.2.4ClientName:.Address:.Telephone number:.Facsimile number:.Additional information:.SIST ETS 300 185-2:1998



Page 13ETS 300 185-2: September 1995A.2.5PICS contact personName:.Address:.Telephone number:.Facsimile number:.Additional information:.A.3PICS/System Conformance Statement (SCS)Provide the relationship of the PICS with the SCS for the system:.A.4Identification of the protocolThis PICS proforma applies to the following standard:ETS 300 185-1 (1993): "Integrated Services Digital Network (ISDN); Conference call, add-on (CONF)supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocolspecification".NOTE:ETS 300 185-1 (1993) was initially published as ETS 300 185 (1993).SIST ETS 300 185-2:1998



Page 14ETS 300 185-2: September 1995A.5Global statement of conformanceThe implementation described in this PICS meets all the mandatory requirements of the referencedstandard?[
] Yes[
] NoNOTE:Answering "No" to this question indicates non-conformance to the protocolspecification. Non-supported mandatory capabilities are to be identified in the PICS,with an explanation of why the implementation is non-conforming. Explanations maybe entered in the comments field at the bottom of each table or on attached pages.In the tabulations which follow, all references are to ETS 300 185-1 [2] unless another numberedreference is explicitly indicated.A.6RolesTable A.1: Type of implementationItemMajor role:Does the implementation.Conditions forstatusStatusReferenceSupportType of implementationR 1not usedR 2.1support user requirements?O.19[ ]Yes [ ]NoR 2.2support network requirements?O.19[ ]Yes [ ]NoR 3.1support requirements at the coincident S and Treference point?O.29[ ]Yes [ ]NoR 3.2support requirements for interworking with privateISDNs at the T reference point?O.210[ ]Yes [ ]NoR 4.1support user requirements at the interface of theserved user?R 2.1 AND R 3.1R 2.1 AND R 3.2NOT R 2.1MO.3N/A9.2, 10[ ]Yes [ ]No[ ]N/AR 4.2support user requirements at the interface of theremote user?N/AN/AR 4.3support network requirements
...

SLOVENSKI STANDARD
SIST ETS 300 185-2:1998
01-november-1998
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL,6'1'RSROQLOQDVWRULWHY
NRQIHUHQþQLNOLF]GRGDMDQMHP&21)3URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMH
ãW'66GHO,]MDYDRVNODGQRVWLL]YHGEHSURWRNROD3,&63URIRUPD
VSHFLILNDFLMH
Integrated Services Digital Network (ISDN); Conference call, add-on (CONF)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Ta slovenski standard je istoveten z: ETS 300 185-2 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST ETS 300 185-2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 185-2:1998

---------------------- Page: 2 ----------------------

SIST ETS 300 185-2:1998
EUROPEAN ETS 300 185-2
TELECOMMUNICATION September 1995
STANDARD
Source: ETSI TC-SPS Reference: DE/SPS-05028-J1
ICS: 33.080
ISDN, supplementary service, PICS
Key words:
Integrated Services Digital Network (ISDN);
Conference call, add-on (CONF) supplementary service;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 2: Protocol Implementation Conformance Statement (PICS)
proforma specification
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - [e-mail]
X.400: Internet:
Tel.: [phone] - Fax: [phone]
*
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1995. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 185-2:1998
Page 2
ETS 300 185-2: September 1995
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Standards Approval Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 185-2:1998
Page 3
ETS 300 185-2: September 1995
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions.8
4 Symbols and abbreviations .8
5 Conformance.9
Annex A (normative): PICS proforma.10
A.1 Instructions for completing the PICS proforma .10
A.1.1 Identification of the implementation .10
A.1.2 Global statement of conformance.10
A.1.3 Explanation of PICS proforma subclauses .10
A.1.4 Symbols, abbreviations and terms.11
A.2 Identification of the implementation.11
A.2.1 Implementation Under Test (IUT) identification .11
A.2.2 System Under Test (SUT) identification .11
A.2.3 Product supplier.12
A.2.4 Client.12
A.2.5 PICS contact person.13
A.3 PICS/System Conformance Statement (SCS).13
A.4 Identification of the protocol .13
A.5 Global statement of conformance .14
A.6 Roles .14
A.7 User.15
A.7.1 Major capabilities .15
A.7.2 Subsidiary capabilities.15
A.7.3 Protocol data units .15
A.7.4 Protocol data unit parameters.16
A.7.5 Timers.17
A.7.6 Call states .17
A.8 Network .18
A.8.1 Major capabilities .18
A.8.2 Subsidiary capabilities.18
A.8.3 Protocol data units .18
A.8.4 Protocol data unit parameters.19
A.8.5 Timers.20
A.8.6 Call states .20

---------------------- Page: 5 ----------------------

SIST ETS 300 185-2:1998
Page 4
ETS 300 185-2: September 1995
Annex B (normative): Requirements list . 21
B.1 User . 21
B.1.1 Requirements on items used in the basic call PICS . 21
B.1.2 Requirements on items used in the generic functional protocol PICS . 21
B.1.3 Requirements on items used in the supplementary service interactions PICS. 22
B.2 Network. 22
B.2.1 Requirements on items used in the basic call PICS . 22
B.2.2 Requirements on items used in the generic functional protocol PICS . 23
B.2.3 Requirements on items used in the supplementary service interactions PICS. 24
History. 25

---------------------- Page: 6 ----------------------

SIST ETS 300 185-2:1998
Page 5
ETS 300 185-2: September 1995
Foreword
This European Telecommunication Standard (ETS) has been produced by the Signalling Protocols and
Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. one
(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) Conference call, add-on
(CONF) supplementary service, as described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing
(PIXIT) proforma specification for the user";
Part 5: "TSS&TP specification for the network";
Part 6: "ATS and partial PIXIT proforma specification for the network".
NOTE: The first part, ETS 300 185-1 (1993), containing the protocol specification, was initially
published as ETS 300 185 (1993) and has identical contents.
To evaluate conformance of a particular implementation, it is necessary to have a statement of which
capabilities and options have been implemented for a given Open Systems Interconnection (OSI)
protocol. Such a statement is called a Protocol Implementation Conformance Statement (PICS).
Transposition dates
Date of adoption of this ETS: 1 September 1995
Date of latest announcement of this ETS (doa): 31 December 1995
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 30 June 1996
Date of withdrawal of any conflicting National Standard (dow): 30 June 1996

---------------------- Page: 7 ----------------------

SIST ETS 300 185-2:1998
Page 6
ETS 300 185-2: September 1995
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 185-2:1998
Page 7
ETS 300 185-2: September 1995
1 Scope
This second part of ETS 300 185 is applicable to the stage three of the Conference call, add-on (CONF)
supplementary service for the pan-European Integrated Services Digital Network (ISDN) as provided by
European public telecommunications operators at the T reference point or coincident S and T reference
point (as defined in ITU-T Recommendation I.411 [12]) by means of the Digital Subscriber Signalling
System No. one (DSS1) protocol. Stage three identifies the protocol procedures and switching functions
needed to support a telecommunications service (see CCITT Recommendation I.130 [11]).
This ETS provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISDN
DSS1 CONF supplementary service protocol as specified in ETS 300 185-1 [2] in compliance with the
relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [10].
The supplier of a protocol implementation which is claimed to conform to ETS 300 185-1 [2] is required to
complete a copy of the PICS proforma provided in annex A of this ETS and is required to provide the
information necessary to identify both the supplier and the implementation.
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-network
interface layer 3; Specifications for basic call control".
[2] ETS 300 185-1 (1993): "Integrated Services Digital Network (ISDN); Conference
call add-on (CONF) supplementary service; Digital Subscriber Signalling System
No. one (DSS1) protocol; Part 1: Protocol specification".
NOTE: ETS 300 185-1 (1993) was initially published as ETS 300 185 (1993).
[3] ETS 300 195-2: "Integrated Services Digital Network (ISDN); Supplementary
service interactions; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 2: Protocol Implementation Conformance Statement (PICS)
proforma specification".
[4] ETS 300 196-2: "Integrated Services Digital Network (ISDN); Generic functional
protocol for the support of supplementary services; Digital Subscriber Signalling
System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance
Statement (PICS) proforma specification".
[5] I-ETS 300 314 (1994): "Integrated Services Digital Network (ISDN); Digital
Subscriber Signalling System No. one (DSS1); Protocol Implementation
Conformance Statement (PICS) proforma specification for the network layer
signalling protocol for circuit-mode basic call control (basic access, user)".
[6] I-ETS 300 315 (1994): "Integrated Services Digital Network (ISDN); Digital
Subscriber Signalling System No. one (DSS1); Protocol Implementation
Conformance Statement (PICS) proforma specification for the network layer
signalling protocol for circuit-mode basic call control (primary rate access,
user)".
[7] I-ETS 300 316 (1994): "Integrated Services Digital Network (ISDN); Digital
Subscriber Signalling System No. one (DSS1); Protocol Implementation
Conformance Statement (PICS) proforma specification for the network layer
signalling protocol for circuit-mode basic call control (basic access, network)".

---------------------- Page: 9 ----------------------

SIST ETS 300 185-2:1998
Page 8
ETS 300 185-2: September 1995
[8] I-ETS 300 317 (1994): "Integrated Services Digital Network (ISDN); Digital
Subscriber Signalling System No. one (DSS1); Protocol Implementation
Conformance Statement (PICS) proforma specification for the network layer
signalling protocol for circuit-mode basic call control (primary rate access,
network)".
[9] ISO/IEC 9646-1: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 1: General concepts".
[10] ISO/IEC 9646-7: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 7: Implementation
Conformance Statements".
[11] CCITT Recommendation I.130 (1988): "Method for the characterization of
telecommunication services supported by an ISDN and network capabilities of
an ISDN".
[12] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -
Reference configurations".
3 Definitions
For the purposes of this ETS, the following definitions apply, in addition to those given in
ETS 300 185-1 [2]:
Protocol Implementation Conformance Statement (PICS): A statement made by the supplier of an
Open Systems Interconnection (OSI) implementation or system, stating which capabilities have been
implemented for a given OSI protocol (see ISO/IEC 9646-1 [9]).
PICS proforma: A document, in the form of a questionnaire, designed by the protocol specifier or
conformance test suite specifier, which, when completed for an OSI implementation or system, becomes
the PICS (see ISO/IEC 9646-1 [9]).
static conformance review: A review of the extent to which the static conformance requirements are met
by the IUT, accomplished by comparing the PICS with the static conformance requirements expressed in
the relevant standard(s) (see ISO/IEC 9646-1 [9]).
4 Symbols and abbreviations
For the purposes of this ETS, the following abbreviations apply:
AND Boolean "and"
C Conditional requirement (to be observed if the relevant conditions apply)
CONF Conference call, add-on
DSS1 Digital Subscriber Signalling System No. one
IER Information Elements Received
IET Information Elements Transmitted
ISDN Integrated Services Digital Network
IUT Implementation Under Test
M Mandatory requirement (to be observed in all cases)
MC Major Capabilities
MR Messages Received
MT Messages Transmitted
N/A Not applicable, not supported or the conditions for status are not met
No not supported
NOT Boolean "not"

---------------------- Page: 10 ----------------------

SIST ETS 300 185-2:1998
Page 9
ETS 300 185-2: September 1995
O Option (may be selected to suit the implementation, provided that any
requirements applicable to the option are observed)
O.n Options, but support required for either at least one or only one of the options in
the group labelled with the same numeral "n"
OR Boolean "or"
OSI Open Systems Interconnection
P Parameters
PICS Protocol Implementation Conformance Statement
R Roles
RL Requirements List
SCS System Conformance Statement
SS Supplementary Service
SUT System Under Test
Yes supported
5 Conformance
A PICS proforma which conforms to this PICS proforma specification shall be technically equivalent to
annex A, and shall preserve the numbering and ordering of the items in annex A.
A PICS which conforms to this PICS proforma specification shall:
a) describe an implementation which claims to conform to ETS 300 185-1 [2];
b) be a conforming ICS proforma which has been completed in accordance with the instructions for
completion given in clause A.1;
c) include the information necessary to uniquely identify both the supplier and the implementation.

---------------------- Page: 11 ----------------------

SIST ETS 300 185-2:1998
Page 10
ETS 300 185-2: September 1995
Annex A (normative): PICS proforma
Notwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants that
users of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PICS.
A.1 Instructions for completing the PICS proforma
A.1.1 Identification of the implementation
Identification of the Implementation Under Test (IUT) and the system in which it resides (the System
Under Test (SUT)) should be filled in so as to provide as much detail as possible regarding version
numbers and configuration options.
The product supplier information and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the PICS should be named as the
contact person.
The SCS as defined in ISO/IEC 9646-1 [9] is a document supplied by the client or product supplier that
summarizes which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or other
standards are implemented and to which conformance is claimed. The PICS/SCS subclause should
describe the relationship of the PICS to the SCS.
A.1.2 Global statement of conformance
If the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completed
to facilitate selection of test cases for optional functions.
If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed,
and all non-supported mandatory capabilities should be identified and explained. Explanations may be
entered in the comments field at the bottom of each table or on attached sheets of paper.
A.1.3 Explanation of PICS proforma subclauses
The PICS proforma contains a Roles clause and thereafter is presented in two parts (for user and
network) with the following subclauses, as required:
- major capabilities;
- subsidiary capabilities;
- protocol data unit support;
- protocol data unit parameters;
- timers;
- call states.
The User clause shall only be completed for user implementations (including private network
implementations) while the Network clause shall only be completed for network implementations. The
Roles subclause shall be completed for all implementations.
The relationship between this PICS proforma and other related PICS proforma (e.g. the basic call PICS
proforma) is expressed in the Requirements List (RL) contained in annex B. This provides the additional
restrictions placed on the related proforma (different conditions, different status, etc.).

---------------------- Page: 12 ----------------------

SIST ETS 300 185-2:1998
Page 11
ETS 300 185-2: September 1995
A.1.4 Symbols, abbreviations and terms
The PICS proforma contained in this annex is comprised of information in tabular form in accordance with
the guidelines presented in ISO/IEC 9646-7 [10].
The reference column contained in the tables gives reference to the appropriate part(s) of
ETS 300 185-1 [2] describing the particular item. Note, however, that a reference merely indicates the
place where the core of a description of an item can be found. Any additional information contained in
ETS 300 185-1 [2] has to be taken into account when making a statement about the conformance of that
particular item.
The following common notations, defined in ISO/IEC 9646-7 [10], are used for the status column:
M mandatory
O optional
N/A not applicable
O. for mutually exclusive or selectable options from a set
The following common notations, defined in ISO/IEC 9646-7 [10], are used for the support column:
Y for supported/implemented
N for not supported/not implemented
A.2 Identification of the implementation
A.2.1 Implementation Under Test (IUT) identification
IUT name:
.........................................................................................................................................................................
.........................................................................................................................................................................
IUT version:
.........................................................................................................................................................................
A.2.2 System Under Test (SUT) identification
SUT name:
.........................................................................................................................................................................
.........................................................................................................................................................................
Hardware configuration:
.........................................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................
Operating system:
.........................................................................................................................................................................
.........................................................................................................................................................................

---------------------- Page: 13 ----------------------

SIST ETS 300 185-2:1998
Page 12
ETS 300 185-2: September 1995
A.2.3 Product supplier
Name:
........................................................................................................................................................................
Address:
........................................................................................................................................................................
........................................................................................................................................................................
........................................................................................................................................................................
Telephone number:
........................................................................................................................................................................
Facsimile number:
........................................................................................................................................................................
Additional information:
........................................................................................................................................................................
........................................................................................................................................................................
........................................................................................................................................................................
A.2.4 Client
Name:
........................................................................................................................................................................
Address:
........................................................................................................................................................................
........................................................................................................................................................................
........................................................................................................................................................................
Telephone number:
........................................................................................................................................................................
Facsimile number:
........................................................................................................................................................................
Additional information:
........................................................................................................................................................................
........................................................................................................................................................................
........................................................................................................................................................................

---------------------- Page: 14 ----------------------

SIST ETS 300 185-2:1998
Page 13
ETS 300 185-2: September 1995
A.2.5 PICS contact person
Name:
.........................................................................................................................................................................
Address:
.........................................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................
Additional information:
.........................................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................
A.3 PICS/System Conformance Statement (SCS)
Provide the relationship of the PICS with the SCS for the system:
.........................................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................
A.4 Identification of the protocol
This PICS proforma applies to the following standard:
ETS 300 185-1 (1993): "Int
...