ETSI EN 301 239 V1.1.3 (1998-06)

Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services for closed user groups (service type D, mobility class 1)

DEN/DECT-020084

Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Profil podatkovnih storitev (DSP) - Izohron podatkovni nosilec s sledenjem - (storitev tipa D, mobilnost razreda 1)

General Information

• Status: Published
• Publication Date: 08-Jun-1998
• Technical Committee: DECT 2 - Data applications
• Current Stage: 12 - Completion
• Due Date: 19-Jun-1998
• Completion Date: 09-Jun-1998
• Ref Project: SIST EN 301 239:2000 - Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services for closed user groups (service type D, mobility class 1)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services for closed user groups (service type D, mobility class 1)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 239 V3SIST EN 301 239:2000en01-PDM-20003SIST EN 301 239:2000SLOVENSKI
STANDARD



SIST EN 301 239:2000



EN 301 239 V1.1.3 (1998-06)European Standard (Telecommunications series)Digital Enhanced Cordless Telecommunications (DECT);Data Services Profile (DSP);Isochronous data bearer services for closed user groups(service type D, mobility class 1)SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)2ReferenceDEN/DECT-020084 (bh000ie0.PDF)KeywordsData, DECT, GSM, profileETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail]://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)3ContentsIntellectual Property Rights.5Foreword.51Scope.62Normative references.63Definitions and abbreviations.73.1Definitions.73.2Abbreviations.74Description of services.94.1Reference configuration.94.2Service objectives.94.2.1General.94.2.232 kbit/s unprotected service.104.2.3Unprotected rate adaptation service.105PHL layer requirements.106MAC layer requirements.106.132 kbit/s unprotected service.116.2Unprotected rate adaptation service.117DLC layer requirements.117.1C-plane requirements.117.2U-plane requirements.117.2.132 kbit/s unprotected service.117.2.2Unprotected rate adaptation service.118NWK layer requirements.119Management entity requirements.1110Generic interworking conventions and procedures.1111Configuration data and capabilities.12Annex A (normative):Specific interworking conventions.13A.1Interworking to V.24 isochronous bearer services.13A.1.1Scope.13A.1.2Reference configuration.13A.1.2.1PP.14A.1.2.2FP.14A.1.2.3General configuration.14A.1.3PP connection establishment procedures.14A.1.4FP connection establishment procedures.14A.1.5Isochronous bearer interworking service using V.24 connection.15A.1.5.1General.15A.1.5.2Reference configuration.15A.1.5.3TAF Interworking to V.24.15A.1.5.3.1General.15A.1.5.3.2V.24 Interchange circuit handling rules.15A.1.5.3.3Call establishment signalling handling.16A.1.5.3.4Data transmission.16A.1.5.4DECT FP Interworking procedures.16A.1.5.4.1General.16A.1.5.4.2Call establishment signalling handling.17A.1.5.4.3V.24 interchange circuit handling rules.17SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)4A.1.5.4.4DCE selection.17A.1.5.4.5Data transmission.17History.18SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin ETR 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect ofETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSIWeb server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).Pursuant to the ETSI Interim IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. Noguarantee can be given as to the existence of other IPRs not referenced in ETR 314 (or the updates on the ETSI Webserver) which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced CordlessTelecommunications (DECT).National transposition datesDate of adoption of this EN:5 June 1998Date of latest announcement of this EN (doa):30 September 1998Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 March 1999Date of withdrawal of any conflicting National Standard (dow):31 March 1999SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)61ScopeThe present document specifies a profile for Digital Enhanced Cordless Telecommunications (DECT) systemsconforming to EN 300 175, parts 1 to 7 [1] - [7]. It is part of a family of profiles aimed at the general connection ofterminals supporting non-voice services to a fixed infra-structure, private and public.The type D service, mobility class 1, as described in the ETR 185 [9], supports Isochronous Data Bearer Services(IDBSs) for Closed User Groups (CUGs) and is suitable for transparent transfer of isochronous data streams. It isintended for use in non-public applications. Video services and secure telephony services (end-to-end encrypted) overexternal networks can be considered as applications of IDBS.Phase 1 of the present document defines an unprotected service offering an unrestricted digital 32 kbit/s data bearerservice and an unprotected single bearer, multi-rate, rate adaptation service to interwork to synchronous ITU-TRecommendations V.series services.Further phases of this profile may additionally provide multiple rate, multi-bearer support and error correction capabilityfor services and applications requiring higher rates and high quality isochronous data transmission.The present document specifies the requirements on the Physical (PHL) layer, Medium Access Control (MAC) layer,Data Link Control (DLC) layer and Network (NWK) layer of DECT. The standard also specifies Management Entity(ME) requirements and generic Interworking Conventions (IC).2Normative referencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 1: Overview".[2]EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 2: Physical layer (PHL)".[3]EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 3: Medium Access Control (MAC) layer".[4]EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 4: Data Link Control (DLC) layer".[5]EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 5: Network (NWK) layer".[6]EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 6: Identities and addressing".[7]EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 7: Security features".SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)7[8]EN 300 444: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile(GAP)".[9]ETR 185: "Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP);Profile overview".[10]EN 301 238: "Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile(DSP); Isochronous data bearer services with roaming mobility (service type D, mobility class 2)".[11]CCITT Recommendation V.24 (1988): "List of definitions for interchange circuits between dataterminal equipment (DTE) and data circuit-terminating equipment (DCE)".[12]ITU-T Recommendation V.34: "A modem operating at data signalling rates of up to 33 600 bit/sfor use on the general switched telephone network and on leased point-to-point 2-wire telephone-type circuits".[13]ITU-T Recommendation R.140: "Definitions of essential technical terms in the field of telegraphtransmission".3Definitions and abbreviations3.1DefinitionsFor the purposes of the present document, the following definitions apply:a)the definitions in EN 300 444 [8]; andb)the following terms:bearer service: A type of telecommunications service that provides the capability for the transmission of signalsbetween user/network interfaces. For DECT systems, the Air (Radio) interface provides the bearer services between theDECT Fixed radio Termination (FT) and the DECT Portable radio Termination (PT).isochronous: Pertaining to a signal or a time-varying phenomenon characterized by significant instants separated bytime intervals having a duration theoretically equal to the duration of a unit interval or to an integral multiple of thisduration (ITU-T Recommendation R.140 [13]).mobility class 1: Closed user groups, for which terminals are pre-registered off-air with one or more specific FixedParts (FPs), and establishment of service and user parameters is therefore implicit, according to a profile-defined list.mobility class 2: Private and public roaming applications for which terminals may move between FPs within a givendomain and for which association of service parameters is explicit at the time of service request.service: A set of functions offered to a user by an organization.synchronous transmission: Transmission using isochronous signals in which the sending and receiving instruments areoperating continuously in a constant time difference between corresponding significant instants (ITU-TRecommendation R.140 [13]).synchronous: The essential characteristics of time-scales or signals such that their corresponding significant instantsoccur at precisely the same average rate. (not in ITU-T Recommendation R.140 [13])3.2AbbreviationsFor the purposes of the present document, the following abbreviations apply:AIAir InterfaceARIAccess Rights IdentityChigher layer control ChannelCCCall ControlSIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)8C-planeControl planeCshigher layer signalling Channel (slow)CUGClosed User GroupDCEData Circuit-terminating EquipmentDECTDigital Enhanced Cordless TelecommunicationsDICDECT Independent ClockingDLCData Link ControlDSPData Services ProfileDTEData Terminal EquipmentFPFixed PartFTFixed radio TerminationGAPGeneric Access ProfileGSMGlobal System for Mobile communicationIhigher layer Information channelICInterworking ConventionsIDBSIsochronous Data Bearer ServiceIPUIInternational Portable User IdentityISDNIntegrated Services Digital NetworkIWFInterworking FunctionsIWPInterworking ProfileIWUInterworking UnitLAP-BLink Access Procedure (Balanced)LAP-CLink Access Procedure (Control)Lba DLC layer C-plane protocol entityLca DLC layer C-plane protocol entityMACMedium Access ControlMEManagement EntityNWKNetWorKPHLPHysicaLPICSProtocol Implementation Conformance StatementPPPortable PartPTPortable radio TerminationTAFTerminal Adaptation FunctionU-planeUser planeSIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)94Description of services4.1Reference configurationThe reference configuration for this profile shall be as shown in figure 1.Closeduser groupset-up dataHigherprotocollayersDECTU-DLCDECTMACDECTPHLHigherprotocollayersDECTU-DLCDECTMACDECTPHLIWFNetworkofferingisochronousbearerservicesNetworkofferingisochronousbearerservicesPPFPFigure 1: Profile reference configuration showing interworking to a networkvia the DECT U-plane (only)4.2Service objectives4.2.1GeneralThe general service objectives for data service profiles with mobility class 1 are described in subclause 6.2.2 ofETR 185 [9].The specific U-plane service objectives of this profile are listed in subclauses 4.2.2 and 4.2.3. There are no requirementsor service objectives in relation to the C-plane.SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)104.2.232 kbit/s unprotected serviceThe U-plane service objective for the unprotected service are detailed in
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services for closed user groups (service type D, mobility class 1)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 239 Version 1.1.3SIST EN 301 239:2000en01-julij-2000SIST EN 301 239:2000SLOVENSKI
STANDARD



SIST EN 301 239:2000



EN 301 239 V1.1.3 (1998-06)European Standard (Telecommunications series)Digital Enhanced Cordless Telecommunications (DECT);Data Services Profile (DSP);Isochronous data bearer services for closed user groups(service type D, mobility class 1)SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)2ReferenceDEN/DECT-020084 (bh000ie0.PDF)KeywordsData, DECT, GSM, profileETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail]://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)3ContentsIntellectual Property Rights.5Foreword.51Scope.62Normative references.63Definitions and abbreviations.73.1Definitions.73.2Abbreviations.74Description of services.94.1Reference configuration.94.2Service objectives.94.2.1General.94.2.232 kbit/s unprotected service.104.2.3Unprotected rate adaptation service.105PHL layer requirements.106MAC layer requirements.106.132 kbit/s unprotected service.116.2Unprotected rate adaptation service.117DLC layer requirements.117.1C-plane requirements.117.2U-plane requirements.117.2.132 kbit/s unprotected service.117.2.2Unprotected rate adaptation service.118NWK layer requirements.119Management entity requirements.1110Generic interworking conventions and procedures.1111Configuration data and capabilities.12Annex A (normative):Specific interworking conventions.13A.1Interworking to V.24 isochronous bearer services.13A.1.1Scope.13A.1.2Reference configuration.13A.1.2.1PP.14A.1.2.2FP.14A.1.2.3General configuration.14A.1.3PP connection establishment procedures.14A.1.4FP connection establishment procedures.14A.1.5Isochronous bearer interworking service using V.24 connection.15A.1.5.1General.15A.1.5.2Reference configuration.15A.1.5.3TAF Interworking to V.24.15A.1.5.3.1General.15A.1.5.3.2V.24 Interchange circuit handling rules.15A.1.5.3.3Call establishment signalling handling.16A.1.5.3.4Data transmission.16A.1.5.4DECT FP Interworking procedures.16A.1.5.4.1General.16A.1.5.4.2Call establishment signalling handling.17A.1.5.4.3V.24 interchange circuit handling rules.17SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)4A.1.5.4.4DCE selection.17A.1.5.4.5Data transmission.17History.18SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin ETR 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect ofETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSIWeb server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).Pursuant to the ETSI Interim IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. Noguarantee can be given as to the existence of other IPRs not referenced in ETR 314 (or the updates on the ETSI Webserver) which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced CordlessTelecommunications (DECT).National transposition datesDate of adoption of this EN:5 June 1998Date of latest announcement of this EN (doa):30 September 1998Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 March 1999Date of withdrawal of any conflicting National Standard (dow):31 March 1999SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)61ScopeThe present document specifies a profile for Digital Enhanced Cordless Telecommunications (DECT) systemsconforming to EN 300 175, parts 1 to 7 [1] - [7]. It is part of a family of profiles aimed at the general connection ofterminals supporting non-voice services to a fixed infra-structure, private and public.The type D service, mobility class 1, as described in the ETR 185 [9], supports Isochronous Data Bearer Services(IDBSs) for Closed User Groups (CUGs) and is suitable for transparent transfer of isochronous data streams. It isintended for use in non-public applications. Video services and secure telephony services (end-to-end encrypted) overexternal networks can be considered as applications of IDBS.Phase 1 of the present document defines an unprotected service offering an unrestricted digital 32 kbit/s data bearerservice and an unprotected single bearer, multi-rate, rate adaptation service to interwork to synchronous ITU-TRecommendations V.series services.Further phases of this profile may additionally provide multiple rate, multi-bearer support and error correction capabilityfor services and applications requiring higher rates and high quality isochronous data transmission.The present document specifies the requirements on the Physical (PHL) layer, Medium Access Control (MAC) layer,Data Link Control (DLC) layer and Network (NWK) layer of DECT. The standard also specifies Management Entity(ME) requirements and generic Interworking Conventions (IC).2Normative referencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 1: Overview".[2]EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 2: Physical layer (PHL)".[3]EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 3: Medium Access Control (MAC) layer".[4]EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 4: Data Link Control (DLC) layer".[5]EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 5: Network (NWK) layer".[6]EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 6: Identities and addressing".[7]EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 7: Security features".SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)7[8]EN 300 444: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile(GAP)".[9]ETR 185: "Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP);Profile overview".[10]EN 301 238: "Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile(DSP); Isochronous data bearer services with roaming mobility (service type D, mobility class 2)".[11]CCITT Recommendation V.24 (1988): "List of definitions for interchange circuits between dataterminal equipment (DTE) and data circuit-terminating equipment (DCE)".[12]ITU-T Recommendation V.34: "A modem operating at data signalling rates of up to 33 600 bit/sfor use on the general switched telephone network and on leased point-to-point 2-wire telephone-type circuits".[13]ITU-T Recommendation R.140: "Definitions of essential technical terms in the field of telegraphtransmission".3Definitions and abbreviations3.1DefinitionsFor the purposes of the present document, the following definitions apply:a)the definitions in EN 300 444 [8]; andb)the following terms:bearer service: A type of telecommunications service that provides the capability for the transmission of signalsbetween user/network interfaces. For DECT systems, the Air (Radio) interface provides the bearer services between theDECT Fixed radio Termination (FT) and the DECT Portable radio Termination (PT).isochronous: Pertaining to a signal or a time-varying phenomenon characterized by significant instants separated bytime intervals having a duration theoretically equal to the duration of a unit interval or to an integral multiple of thisduration (ITU-T Recommendation R.140 [13]).mobility class 1: Closed user groups, for which terminals are pre-registered off-air with one or more specific FixedParts (FPs), and establishment of service and user parameters is therefore implicit, according to a profile-defined list.mobility class 2: Private and public roaming applications for which terminals may move between FPs within a givendomain and for which association of service parameters is explicit at the time of service request.service: A set of functions offered to a user by an organization.synchronous transmission: Transmission using isochronous signals in which the sending and receiving instruments areoperating continuously in a constant time difference between corresponding significant instants (ITU-TRecommendation R.140 [13]).synchronous: The essential characteristics of time-scales or signals such that their corresponding significant instantsoccur at precisely the same average rate. (not in ITU-T Recommendation R.140 [13])3.2AbbreviationsFor the purposes of the present document, the following abbreviations apply:AIAir InterfaceARIAccess Rights IdentityChigher layer control ChannelCCCall ControlSIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)8C-planeControl planeCshigher layer signalling Channel (slow)CUGClosed User GroupDCEData Circuit-terminating EquipmentDECTDigital Enhanced Cordless TelecommunicationsDICDECT Independent ClockingDLCData Link ControlDSPData Services ProfileDTEData Terminal EquipmentFPFixed PartFTFixed radio TerminationGAPGeneric Access ProfileGSMGlobal System for Mobile communicationIhigher layer Information channelICInterworking ConventionsIDBSIsochronous Data Bearer ServiceIPUIInternational Portable User IdentityISDNIntegrated Services Digital NetworkIWFInterworking FunctionsIWPInterworking ProfileIWUInterworking UnitLAP-BLink Access Procedure (Balanced)LAP-CLink Access Procedure (Control)Lba DLC layer C-plane protocol entityLca DLC layer C-plane protocol entityMACMedium Access ControlMEManagement EntityNWKNetWorKPHLPHysicaLPICSProtocol Implementation Conformance StatementPPPortable PartPTPortable radio TerminationTAFTerminal Adaptation FunctionU-planeUser planeSIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)94Description of services4.1Reference configurationThe reference configuration for this profile shall be as shown in figure 1.Closeduser groupset-up dataHigherprotocollayersDECTU-DLCDECTMACDECTPHLHigherprotocollayersDECTU-DLCDECTMACDECTPHLIWFNetworkofferingisochronousbearerservicesNetworkofferingisochronousbearerservicesPPFPFigure 1: Profile reference configuration showing interworking to a networkvia the DECT U-plane (only)4.2Service objectives4.2.1GeneralThe general service objectives for data service profiles with mobility class 1 are described in subclause 6.2.2 ofETR 185 [9].The specific U-plane service objectives of this profile are listed in subclauses 4.2.2 and 4.2.3. There are no requirementsor service objectives in relation to the C-plane.SIST EN 301 239:2000



ETSIEN 301 239 V1.1.3 (1998-06)104.2.232 kbit/s unprotected serviceThe U-plane service objective for the unprotected service are detai
...