ETSI TS 102 694-1 V9.6.0 (2019-06)

Smart Cards; Test specification for the Single Wire Protocol (SWP) interface; Part 1: Terminal features (Release 9)

RTS/SCP-00SWPTv960

General Information

• Status: Published
• Publication Date: 10-Jun-2019
• Technical Committee: SET TEST - SET TEST
• Current Stage: 12 - Completion
• Due Date: 10-Jun-2019
• Completion Date: 11-Jun-2019

Standards Content (Sample)

ETSI TS 102 694-1 V9.6.0 (2019-06)






TECHNICAL SPECIFICATION
Smart Cards;
Test specification for the
Single Wire Protocol (SWP) interface;
Part 1: Terminal features
(Release 9)

---------------------- Page: 1 ----------------------
Release 9 2 ETSI TS 102 694-1 V9.6.0 (2019-06)



Reference
RTS/SCP-00SWPTv960
Keywords
smart card, terminal
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2019.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
Release 9 3 ETSI TS 102 694-1 V9.6.0 (2019-06)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Test environment . 7
5 Test cases . 7
Annex A: Void . 8
Annex B (informative): Core specification version information . 9
Annex C (informative): Change history . 10
History . 12

ETSI

---------------------- Page: 3 ----------------------
Release 9 4 ETSI TS 102 694-1 V9.6.0 (2019-06)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Smart Card Platform (SCP).
The contents of the present document are subject to continuing work within TC SCP and may change following formal
TC SCP approval. If TC SCP modifies the contents of the present document, it will then be republished by ETSI with
an identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
0 early working draft;
1 presented to TC SCP for information;
2 presented to TC SCP for approval;
3 or greater indicates TC SCP approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
The present document is part 1 of a multi-part deliverable covering the Test specification for the Single Wire
Protocol (SWP) interface, as identified below:
Part 1: "Terminal features";
Part 2: "UICC features".

ETSI

---------------------- Page: 4 ----------------------
Release 9 5 ETSI TS 102 694-1 V9.6.0 (2019-06)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document defines test cases for the terminal relating to Single Wire Protocol (SWP). SWP is the
communication interface between the UICC and a contactless frontend (CLF) as specified in ETSI TS 102 613 [1].
The aim of the present document is to ensure interoperability between the terminal and the UICC independently of the
respective manufacturer, card issuer or operator.
ETSI

---------------------- Page: 5 ----------------------
Release 9 6 ETSI TS 102 694-1 V9.6.0 (2019-06)
1 Scope
The present document covers the minimum characteristics which are considered necessary for the terminal in order to
provide compliance to ETSI TS 102 613 [1].
The present document specifies the test cases for:
• the physical layer of the interface CLF - UICC;
• the electrical interface of the CLF;
• the initial communication establishment CLF - UICC;
• the data link layer.
Test cases for the UICC relating to ETSI TS 102 613 [1] and test cases for the host controller interface (HCI) covering
both terminal and UICC are out of scope of the present document.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
ref
...