ETSI EN 301 064-1 V1.1.2 (1999-01)

Telecommunications Management Network (TMN); Information models and protocols for the management and control of the Asynchronous Transfer Mode (ATM) switching network element; Part 1: Q3 interface specification

DEN/TMN-00046-1

Telekomunikacijsko upravljavno omrežje (TMN) - Informacijski modeli in protokoli za upravljanje in krmiljenje komutacijskega omrežnega elementa asinhronega prenosnega načina (ATM) - 1. del: Specifikacija vmesnika Q3

General Information

• Status: Published
• Publication Date: 20-Jan-1999
• Technical Committee: TMN - Telecommunications Management Network
• Current Stage: 12 - Completion
• Due Date: 18-Dec-1998
• Completion Date: 21-Jan-1999
• Ref Project: SIST EN 301 064-1 V1.1.2:2003 - Telecommunications Management Network (TMN); Information models and protocols for the management and control of the Asynchronous Transfer Mode (ATM) switching network element; Part 1: Q3 interface specification

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LQKURQHJDTelecommunications Management Network (TMN); Information models and protocols for the management and control of the Asynchronous Transfer Mode (ATM) switching network element; Part 1: Q3 interface specification33.040.35Telefonska omrežjaTelephone networksICS:Ta slovenski standard je istoveten z:EN 301 064-1 Version 1.1.2SIST EN 301 064-1 V1.1.2:2003en01-november-2003SIST EN 301 064-1 V1.1.2:2003SLOVENSKI
STANDARD



SIST EN 301 064-1 V1.1.2:2003



EN 301 064-1 V1.1.2 (1999-01)European Standard (Telecommunications series)Telecommunications Management Network (TMN);Information models and protocols for the management andcontrol of the Asynchronous Transfer Mode (ATM)switching network element;Part 1: Q3 interface specificationSIST EN 301 064-1 V1.1.2:2003



ETSIEN 301 064-1 V1.1.2 (1999-01)2ReferenceDEN/TMN-00046-1 (9uo90idc.PDF)Keywordsbroadband, control, ISDN, NNI, protocol, Q3interface, switching, UNIETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail] copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: [e-mail] NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 301 064-1 V1.1.2:2003



ETSIEN 301 064-1 V1.1.2 (1999-01)3ContentsIntellectual Property Rights.4Foreword.41Scope.52References.52.1Normative references.52.2Informative references.63Definitions and abbreviations.73.1Definitions.73.2Abbreviations.73.3Conventions.74Information model diagrams.74.1Entity-relationship models.74.1.1ATM generic modelling.74.1.2ATM interworking and adaptation layer modelling.84.1.3Broadband customer administration modelling.94.1.4Broadband routeing modelling.104.2Inheritance hierarchy.105Formal object class definitions.115.1Object classes.115.1.1Broadband customer administration fragment.115.1.1.1Calling line identification presentation independent for broadband (clipIndBb).115.1.1.2Calling line identification restriction independent for broadband (clirIndBb).115.1.1.3Closed user group subscription option independent for broadband (cugSubscriptionOptionIndBb).115.1.1.4Connected line identification presentation independent for broadband (colpIndBb).115.1.1.5Connected line identification restriction independent for broadband (colrIndBb).125.1.1.6Sub-addressing independent for broadband (subIndBb).125.1.1.7User to user signalling independent for broadband (userToUserSignallingIndBb).126Type definitions.127Protocol stacks.12Annex A (normative):ATM switch management requirements.13Annex B (normative):Reference scenario for the management of the ATM switchingnetwork element.14Annex C (informative):Functional architecture.16C.1Lower layers: SDH based interfaces.16C.2Lower layers: cell based interfaces.18C.3Higher ATM layers.19Annex D (informative):Point-to-multipoint connections.20Annex E (informative):Bibliography.21History.22SIST EN 301 064-1 V1.1.2:2003



ETSIEN 301 064-1 V1.1.2 (1999-01)4Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical CommitteeTelecommunications Management Network (TMN).The present document is part 1 of a multi-part EN covering Telecommunications Management Network (TMN);Information models and protocols for the management and control of the Asynchronous Transfer Mode (ATM)switching network element, as identified below:Part 1: "Q3 interface specification"NOTE: Other parts will be defined later.National transposition datesDate of adoption of this EN: 18 December 1998Date of latest announcement of this EN (doa): 31 March 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e): 30 September 1999Date of withdrawal of any conflicting National Standard (dow): 30 September 1999SIST EN 301 064-1 V1.1.2:2003



ETSIEN 301 064-1 V1.1.2 (1999-01)51ScopeThe present document specifies the Q3 interface between an Asynchronous Transfer Mode (ATM) switch and theTelecommunications Management Network (TMN) for the support of configuration, fault and performance managementfunctions. The interface specified is that between TMN network elements or Q-adapters which interface to TMNOperations Systems (OSs) without mediation and between OSs and mediation devices, as defined in ITU-TRecommendation M.3010 [5]. Fault and performance management together include both passive monitoring of reportsand active fault isolation.The configuration by management of channels for signalling, including those for B-ISDN signalling, is within the scopeof the present document. The management of broadband customer administration and the configuration for call routeingincluding that for interworking with narrowband switches for both incoming and outgoing interfaces is also within thescope of the present document.An ATM switch may include ATM crossconnect functionality, but this is specified by reference to EN 300 820-1 [22] orthe ITU-T Recommendation I.751 [4] and by importing the relevant classes of managed objects where appropriate.Existing protocols are used where possible, and the focus of the work is on defining the object model. The definition ofthe functionality of TMN operations systems is outside the scope of the present document.The management of ATM Adaptation Layers (AALs) which are only used in the user plane is outside the scope of thepresent document since the broadband switch management has no visibility of ATM adaptation for the user plane.Management of AAL5 and the Signalling ATM Adaptation Layer (SAAL) is within the scope since these are used in thecontrol plane.Security management is outside the scope of the present document.2ReferencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.2.1Normative references[1]ITU-T Recommendation I.311 (1993): "B-ISDN general network aspects".[2]ITU-T Recommendation I.363.5 (1996): "B-ISDN ATM Adaptation Layer specification: Type 5AAL".[3]ITU-T Recommendation I.610 (1992): "B-ISDN operation and maintenance principles andfunctions".[4]ITU-T Recommendation I.751 (1997): "Asynchronous transfer mode management of the networkelement view".[5]ITU-T Recommendation M.3010 (1995): "Principles for a Telecommunications managementnetwork".SIST EN 301 064-1 V1.1.2:2003



ETSIEN 301 064-1 V1.1.2 (1999-01)6[6]ITU-T Recommendation M.3100 (1995): "Generic network information model".[7]ITU-T Recommendation Q.2110 (1994): "B-ISDN ATM adaptation layer - service specificconnection oriented protocol (SSCOP)".[8]ITU-T Recommendation Q.2130 (1994): "B-ISDN signalling ATM adaptation layer - Servicespecific coordination function for support of signalling at the user network interface (SSFC atUNI)".[9]ITU-T Recommendation Q.2140 (1995): "B-ISDN ATM adaptation layer - Service specificcoordination function for signalling at the network node interface (SSFC at NNI)".[10]ITU-T Recommendation Q.2761 (1995): "Functional description of the B-ISDN user part(B-ISUP) of signalling system No. 7".[11]ITU-T Recommendation Q.2762 (1995): "General Functions of messages and signals of theB-ISDN user part (B-ISUP) of Signalling System No. 7".[12]ITU-T Recommendation Q.2763 (1995): "Signaling System No. 7 B-ISDN User Part (B-ISUP) -Formats and codes".[13]ITU-T Recommendation Q.2764 (1995): "Signalling system No. 7 B-ISDN User Part (B-ISUP) -Basic call procedures".[14]ITU-T Recommendation Q.2931 (1995): "Digital Subscriber Signalling System No. 2 (DSS 2) -User-Network Interface (UNI) layer 3 specification for basic call/connection control".[15]ITU-T Recommendation Q.824.6 (1998): "Broadband Switch Management".NOTE:ITU-T Recommendation Q.824.6 will be published shortly.[16]ITU-T Recommendation X.720 | ISO/IEC 10165-1 (1992): "Information technology - OpenSystems Interconnection - Structure of management information: Management information model".[17]ITU-T Recommendation X.721 | ISO/IEC 10165-2 (1992): "Information technology - OpenSystems Interconnection - Structure of management information: Definition of managementinformation".[18]ITU-T Recommendation X.731 | ISO/IEC 10164-2 (1992): "Information technology - OpenSystems Interconnection - Systems Management: State management function".[19]ITU-T Recommendation X.732 | ISO/IEC 10164-3 (1992): "Information technology - OpenSystems Interconnection - Systems Management: Attributes for representing relationships".[20]ITU-T Recommendation Q.821 (1992): "Stage 2 and stage 3 description for the Q3 interface -Alarm surveillance".[21]ETS 300 469: "Broadband Integrated Services Digital Network (B-ISDN); Asynchronous TransferMode (ATM); Management of the network element view [ITU-T Recommendation I.751 (1996)]".[22]EN 300 820-1: "Network Aspects (NA); Management information model for the X-type interfacebetween Operation Systems (OSs) of a Virtual Path (VP)/Virtual Channel (VC) cross connectednetwork; Part 1: Configuration management aspects".2.2Informative references[23]ITU-T Recommendation Q.811: "Lower layer protocol profiles for the Q3 X interfaces".[24]ITU-T Recommendation Q.812: "Upper layer protocol profiles for the Q3 and X interfaces".[25]ITU-T Recommendation G.773: "Protocol suites for Q-interfaces for management of transmissionsystems".[26]ITU-T Recommendation G.784: "Synchronous digital hierarchy (SDH) management".SIST EN 301 064-1 V1.1.2:2003



ETSIEN 301 064-1 V1.1.2 (1999-01)7[27]ITU-T Recommendation Q.822 (1993): "Stage 1, stage 2 and stage 3 description for the Q3interface - Performance Management".[28]ITU-T Recommendation I.361: "B-ISDN ATM layer specification".[29]ATM Forum Specification af-nm-0027.000 (1995): "CMIP Specification for the M4 interface".3Definitions and abbreviations3.1DefinitionsSee the identically numbered part of ITU-T Recommendation Q.824.6 [15] for the content here.3.2AbbreviationsSee the identically numbered part of ITU-T Recommendation Q.824.6 [15] for the content here.3.3ConventionsSee the identically numbered part of ITU-T Recommendation Q.824.6 [15] for the content here.4Information model diagramsSee the identically numbered part of ITU-T Recommendation Q.824.6 [15] for the content here.4.1Entity-relationship modelsSee the identically numbered part of ITU-T Recommendation Q.824.6 [15] for the content here.4.1.1ATM generic modellingSee the identicall
...