Universal Mobile Telecommunications System (UMTS); UTRAN Iupc interface general aspects and principles (3GPP TS 25.450 version 15.0.0 Release 15)

RTS/TSGR-0325450vf00

General Information

Status
Published
Publication Date
11-Jul-2018
Current Stage
12 - Completion
Completion Date
12-Jul-2018
Ref Project

Buy Standard

Standard
ETSI TS 125 450 V15.0.0 (2018-07) - Universal Mobile Telecommunications System (UMTS); UTRAN Iupc interface general aspects and principles (3GPP TS 25.450 version 15.0.0 Release 15)
English language
14 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ETSI TS 125 450 V15.0.0 (2018-07)






TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
UTRAN Iupc interface general aspects and principles
(3GPP TS 25.450 version 15.0.0 Release 15)

---------------------- Page: 1 ----------------------
3GPP TS 25.450 version 15.0.0 Release 15 1 ETSI TS 125 450 V15.0.0 (2018-07)



Reference
RTS/TSGR-0325450vf00
Keywords
UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 25.450 version 15.0.0 Release 15 2 ETSI TS 125 450 V15.0.0 (2018-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 25.450 version 15.0.0 Release 15 3 ETSI TS 125 450 V15.0.0 (2018-07)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 4
1 Scope . 5
2 References . 5
3 Definitions and abbreviations . 5
3.1 Definitions . 5
3.2 Abbreviations . 6
3.3 Specification Notations . 6
4 General Aspects . 7
4.1 Introduction . 7
4.2 Iupc Interface General Principles . 7
4.3 Iupc Interface Specification Objectives . 7
4.4 Iupc Interface Capabilities . 7
4.4.1 General . 7
4.4.2 Position Calculation Services . 8
4.4.3 Information Exchange Services . 8
4.4.4 SAS Centric Position Services . 8
4.5 Iupc Interface Characteristics . 8
4.5.1 Uses of SCCP . 8
4.5.1.1 General . 8
4.5.1.2 SCCP Addressing . 8
4.5.1.3 SCCP connection establishment. 8
4.5.1.4 SCCP connection release . 9
4.5.1.5 General SCCP Abnormal Conditions . 9
5 Functions of the Iupc Interface Protocols . 9
5.1 List of Functions . 9
5.2 Management of GPS Related Data . 10
5.3 Management of Position Calculation Functions . 10
5.4 Management of SAS Centric Position Functions . 10
5.5 Management of GANSS Related Data . 10
6 Other Iupc Interface Specifications . 10
6.1 UTRAN Iupc Interface: Layer 1 (TSG RAN 25.451) . 10
6.2 UTRAN Iupc Interface: Signalling Transport (TSG RAN 25.452) . 10
6.3 PCAP Specification (TSG RAN 25.453) . 10
6.4 Summary of UTRAN Iupc Interface Technical Specifications . 10
Annex A (informative): Change history . 12
History . 13

ETSI

---------------------- Page: 4 ----------------------
3GPP TS 25.450 version 15.0.0 Release 15 4 ETSI TS 125 450 V15.0.0 (2018-07)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 25.450 version 15.0.0 Release 15 5 ETSI TS 125 450 V15.0.0 (2018-07)
1 Scope
The present document is an introduction to the TSG RAN TS 25.45z series of UMTS Technical Specifications that
define the Iupc Interface. The Iupc interface is a logical interface for the interconnection of Stand-Alone SMLC (SAS)
and Radio Network Controller (RNC) components of the Universal Terrestrial Radio Access Network (UTRAN) for the
UMTS system.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
● References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
● For a specific reference, subsequent revisions do not apply.
● For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] Void
[2] 3GPP TS 25.451: "UTRAN Iupc Interface: Layer 1".
[3] 3GPP TS 25.452: "UTRAN Iupc Interface: Signalling Transport".
[4] 3GPP TS 25.453: "UTRAN Iupc Interface PCAP Signalling".
[5] ITU-T Recommendation Q.711 (1996-07): "Functional description of the signalling connection
control part".
[6] ITU-T Recommendation Q.712 (1996-07): "Definition and function of signalling connection
control part messages".
[7] ITU-T Recommendation Q.713 (1996-07): "Signalling connection control part formats and codes".
[8] ITU-T Recommendation Q.714 (1996-07): "Signalling connection control part procedures".
[9] 3GPP TS 23.003: "Numbering, Addressing and Identification".
[10] Void
[11] 3GPP TS 25.305: "Stage 2 functional specification of UE positioning in UTRAN"
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
Stand-Alone SMLC (SAS): As defined in TS 25.305 [11].
RNC Centric: In this mode of operation (defined in TS 25.305 [11]), the RNC is responsible for position method
selection and initiation of the selected positioning method. Once a position method is selected, the RNC may interact
with the SAS to exchange data as well as for execution of the selected positioning method.
SAS Centric: In this mode of operation (defined in TS 25.305 [11]), the SAS is responsible for position method
selection and initiation of the selected positioning method. Once a position method is selected, the SAS may interact
with the RNC to exchange data to enable it to execute the selected positioning method.
ETSI

---------------------- Page: 6 ----------------------
3GPP TS 25.450 version 15.0.0 Release 15 6 ETSI TS 125 450 V15.0.0 (2018-07)
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
GANSS Galileo and Additional Navigation Satellite Systems
GNSS Global Navigation Satellite System
GPS Global Positioning System
GT
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.