ETSI EN 300 910 V7.3.1 (2000-10)

Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05 version 7.3.1 Release 1998)

REN/SMG-020505Q7R1

Digitalni celični telekomunikacijski sistem (faza 2+) – Radijsko oddajanje in sprejemanje (GSM 05.05, različica 7.3.1, izdaja 1998)

General Information

• Status: Published
• Publication Date: 04-Oct-2000
• Technical Committee: SMG 2 - Radio
• Current Stage: 12 - Completion
• Due Date: 08-Sep-2000
• Completion Date: 05-Oct-2000
• Ref Project: SIST EN 300 910 V7.3.1:2003 - Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and reception (GSM 05.05 version 7.3.1 Release 1998)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 910 V7.3.1:2003
01-december-2003
'LJLWDOQLFHOLþQLWHOHNRPXQLNDFLMVNLVLVWHPID]D±5DGLMVNRRGGDMDQMHLQ
VSUHMHPDQMH*60UD]OLþLFDL]GDMD
Digital cellular telecommunications system (Phase 2+) (GSM); Radio transmission and
reception (GSM 05.05 version 7.3.1 Release 1998)
Ta slovenski standard je istoveten z: EN 300 910 Version 7.3.1
ICS:
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
SIST EN 300 910 V7.3.1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 910 V7.3.1:2003

---------------------- Page: 2 ----------------------

SIST EN 300 910 V7.3.1:2003
ETSI EN 300 910 V7.3.1 (2000-10)
European Standard (Telecommunications series)
Digital cellular telecommunications system (Phase 2+);
Radio transmission and reception
(GSM 05.05 version 7.3.1 Release 1998)
R
GLOBAL SYSTEM FOR
MOBILE COMMUNICATIONS

---------------------- Page: 3 ----------------------

SIST EN 300 910 V7.3.1:2003
2 ETSI EN 300 910 V7.3.1 (2000-10)
(GSM 05.05 version 7.3.1 Release 1998)
Reference
REN/SMG-020505Q7R1
Keywords
Digital cellular telecommunications system,
Global System for Mobile communications (GSM)
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:[phone] Fax:[phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 910 V7.3.1:2003
3 ETSI EN 300 910 V7.3.1 (2000-10)
(GSM 05.05 version 7.3.1 Release 1998)
Contents
Intellectual Property Rights.6
Foreword.6
1 Scope .7
1.1 References .7
1.2 Abbreviations .8
2 Frequency bands and channel arrangement.8
3 Reference configuration .9
4 Transmitter characteristics .10
4.1 Output power.10
4.1.1 Mobile Station .10
4.1.2 Base station.12
4.1.2.1 Additional requirements for PCS 1 900 Base stations (PCS 1 900).13
4.2 Output RF spectrum .13
4.2.1 Spectrum due to the modulation and wide band noise.13
4.2.2 Spectrum due to switching transients .17
4.3 Spurious emissions.18
4.3.1 Principle of the specification .18
4.3.2 Base Transceiver Station .19
4.3.3 Mobile Station .20
4.3.3.1 Mobile Station GSM 900 and DCS 1 800.20
4.3.3.2 Mobile Station PCS 1 900.20
4.4 Radio frequency tolerance.21
4.5 Output level dynamic operation .21
4.5.1 Base Transceiver Station .21
4.5.2 Mobile Station .21
4.6 Phase accuracy .22
4.7 Intermodulation attenuation.22
4.7.1 Base transceiver station .22
4.7.2 Intra BTS intermodulation attenuation .22
4.7.3 Intermodulation between MS (DCS 1 800 & PCS 1 900 only) .23
4.7.4 Mobile PBX (GSM 900 only).23
5 Receiver characteristics.23
5.1 Blocking characteristics .23
5.2 AM suppression characteristics.25
5.3 Intermodulation characteristics .26
5.4 Spurious emissions.26
6 Transmitter/receiver performance .26
6.1 Nominal Error Rates (NER) .27
6.2 Reference sensitivity level.27
6.3 Reference interference level .29
6.4 Erroneous frame indication performance .30
6.5 Random access and paging performance at high input levels .30
6.6 Frequency hopping performance under interference conditions. .31
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 910 V7.3.1:2003
4 ETSI EN 300 910 V7.3.1 (2000-10)
(GSM 05.05 version 7.3.1 Release 1998)
Annex A (informative): Spectrum characteristics (spectrum due to the modulation).44
Annex B (normative): Transmitted power level versus time .50
Annex C (normative): Propagation conditions.53
C.1 Simple wideband propagation model .53
C.2 Doppler spectrum types.53
C.3 Propagation models.54
C.3.1 Typical case for rural area (RAx): (6 tap setting).54
C.3.2 Typical case for hilly terrain (HTx): (12 tap setting).54
C.3.3 Typical case for urban area (TUx): (12 tap setting).55
C.3.4 Profile for equalization test (EQx): (6 tap setting) .55
C.3.5 Typical case for very small cells (TIx): (2 tap setting).55
Annex D (normative): Environmental conditions .56
D.1 General .56
D.2 Environmental requirements for the MSs.56
D.2.1 Temperature (GSM 900 and DCS 1 800).56
D.2.1.1 Environmental Conditions (PCS 1 900).56
D.2.2 Voltage .56
D.2.3 Vibration (GSM 900 and DCS 1 800).57
D.2.3.1 Vibration (PCS 1 900) .57
D.3 Environmental requirements for the BSS equipment.57
D.3.1 Environmental requirements for the BSS equipment .58
Annex E (normative): Repeater characteristics (GSM 900 and DCS 1800).59
E.1 Introduction .59
E.2 Spurious emissions.59
E.3 Intermodulation products .60
E.4 Out of band gain.60
E.5 Frequency error and phase error.60
Annex F (normative): Antenna Feeder Loss Compensator Characteristics (GSM 900 and
DCS 1800).61
F.1 Introduction .61
F.2 Transmitting path .61
F.2.1 Maximum output power .61
F.2.2 Gain .61
F.2.3 Burst transmission characteristics .62
F.2.4 Phase error.62
F.2.5 Frequency error .62
F.2.6 Group delay.63
F.2.7 Spurious emissions.63
F.2.8 VSWR .63
F.2.9 Stability .64
F.3 Receiving path.64
F.3.1 Gain .64
F.3.2 Noise figure.64
F.3.3 Group delay.64
F.3.4 Intermodulation performance .64
F.3.5 VSWR .64
F.3.6 Stability .64
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 910 V7.3.1:2003
5 ETSI EN 300 910 V7.3.1 (2000-10)
(GSM 05.05 version 7.3.1 Release 1998)
F.4 Guidelines (informative) .65
Annex G: Not Used.66
Annex H (normative): Requirements on Location Measurement Unit .67
H.1 TOA LMU Requirements.67
H.1.1 Void.67
H.1.2 LMU characteristics .67
H.1.2.1 Blocking characteristics.67
H.1.2.2 AM suppression characteristics .67
H.1.2.3 Intermodulation characteristics.68
H.1.2.4 Spurious emissions .68
H.1.3 Time-of-Arrival Measurement Performance .68
H.1.3.1 Sensitivity Performance.68
H.1.3.2 Interference Performance.69
H.1.3.3 Multipath Performance .70
H.1.4 Radio Interface Timing Measurement Performance.70
H.2 E-OTD LMU Requirements.70
H.2.1 LMU Characteristics .71
H.2.1.1 Blocking characteristics.71
H.2.1.2 AM suppression characteristics .71
H.2.1.3 Intermodulation characteristics.71
H.2.2 Sensitivity and Interference Performance.71
H.2.2.1 Sensitivity Performance.71
H.2.2.2 Interference Performance.72
H.2.2.3 Multipath Performance .72
Annex I (normative): E-OTD Mobile Station Requirements.74
I.1 Introduction .74
I.2 Sensitivity and Interference Performance .74
I.2.1 Sensitivity Performance .74
I.2.2 Interference Performance .75
I.2.3 Multipath Performance.75
Annex L (informative): Change control history .76
History .77
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 910 V7.3.1:2003
6 ETSI EN 300 910 V7.3.1 (2000-10)
(GSM 05.05 version 7.3.1 Release 1998)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Special Mobile
Group (SMG).
The present document defines the requirements for the transceiver of the digital mobile cellular and personal
communication systems operating in the 900 MHz (P-GSM, E-GSM and R-GSM) and 1 800 MHz band (GSM 900 and
DCS 1 800).
The contents of the present document may be subject to continuing work within SMG and may change following formal
SMG approval. Should SMG modify the contents of the present document it will then be re-submitted for formal
approval procedures by ETSI with an identifying change of release date and an increase in version number as follows:
Version 7.x.y
where:
7 GSM Phase 2+ Release 1998.
x the second digit is incremented for changes of substance, i.e. technical enhancements, corrections, updates,
etc.;
y the third digit is incremented when editorial only changes have been incorporated in the specification.
National transposition dates
Date of adoption of the present document: 1 September 2000
Date of latest announcement of the present document (doa): 31 December 2000
Date of latest publication of new National Standard
or endorsement of the present document (dop/e): 30 June 2001
Date of withdrawal of any conflicting National Standard (dow): 30 June 2001
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 910 V7.3.1:2003
7 ETSI EN 300 910 V7.3.1 (2000-10)
(GSM 05.05 version 7.3.1 Release 1998)
1 Scope
The present document defines the requirements for the transceiver of the pan-European digital mobile cellular and
personal communication systems operating in the GSM 900 MHz and 1 800 MHz band (GSM 900 and DCS 1 800), and
in the PCS 1 900 MHz band.
Requirements are defined for two categories of parameters:
- those that are required to provide compatibility between the radio channels, connected either to separate or
common antennas, that are used in the system. This category also includes parameters providing compatibility
with existing systems in the same or adjacent frequency bands;
- those that define the transmission quality of the system.
The present document defines RF characteristics for the Mobile Station (MS) and Base Station System (BSS). The BSS
will contain either Base Transceiver Stations (BTS) or microcell base transceiver stations (micro-BTS). The precise
measurement methods are specified in GSM 11.10 and GSM 11.20.
Unless otherwise stated, the requirements defined in the present document apply to the full range of environmental
conditions specified for the equipment (see annex D).
In the present document some relaxation's are introduced for GSM 900 MSs which fulfil the following conditions:
- pertain to power class 4 or 5 (see clause 4.1.1);
- not designed to be vehicle mounted (see GSM 02.06).
In the present document these Mobile Stations are referred to as "small MS".
NOTE: In the present document, a handheld which can be connected to a car kit is not considered to be vehicle
mounted.
MSs may operate on more than one of the frequency bands specified in clause 2. These MSs, defined in GSM 02.06, are
referred to as "Multi band MSs" in the present document. Multi band MSs shall meet all requirements for each of the
bands supported. The relaxation on GSM 900 for a "small MS" are also valid for a multi band MS if it complies with
the definition of a small MS.
The RF characteristics of repeaters are defined in annex E of the present document. Annexes D and E are the only
clauses of the present document applicable to repeaters. Annex E does not apply to the MS or BSS.
1.1 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
• For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y).
[1] GSM 01.04: "Digital cellular telecommunications system (Phase 2+); Abbreviations and
acronyms".
[2] GSM 02.06: "Digital cellular telecommunications system (Phase 2+); Types of Mobile Stations
(MS)".
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 910 V7.3.1:2003
8 ETSI EN 300 910 V7.3.1 (2000-10)
(GSM 05.05 version 7.3.1 Release 1998)
[3] GSM 03.64: "Digital cellular telecommunications system (Phase 2+); General Packet Radio
Service (GPRS); GPRS Radio Interface Stage 2".
[4] GSM 05.01: "Digital cellular telecommunications system (Phase 2+); Physical layer on the radio
path General description".
[5] GSM 05.04: "Digital cellular telecommunications system (Phase 2+); Modulation".
[6] GSM 05.08: "Digital cellular telecommunications system (Phase 2+); Radio subsystem link
control".
[7] GSM 05.10: "Digital cellular telecommunications system (Phase 2+); Radio subsystem
synchronization".
[8] GSM 11.10: "Digital cellular telecommunications system (Phase 2+); Mobile Station (MS)
conformity specification".
[9] GSM 11.11: "Digital cellular telecommunications system (Phase 2+); Specification of the
Subscriber Identity Module - Mobile Equipment (SIM - ME) interface".
[10] ITU-T Recommendation O.153: "Basic parameters for the measurement of error performance at
bit rates below the primary rate".
[11] ETS 300 019-1-3: "Equipment Engineering (EE); Environmental conditions and environmental
tests for telecommunications equipment; Part 1-3: Classification of environmental conditions
Stationary use at weather protected locations".
[12] ETS 300 019-1-4: "Equipment Engineering (EE); Environmental conditions and environmental
tests for telecommunications equipment; Part 1-4: Classification of environmental conditions
Stationary use at non-weather protected locations".
[13] GSM 04.14: "Digital cellular telecommunications system (Phase 2+); Individual equipment type
requirements and interworking; Special conformance testing functions".
[14] ANSI T1.610 "Generic Procedures for Supplementary Services", 1990
[15] GSM 03.52: "Digital cellular telecommunications system (Phase 2+); GSM Cordless Telephony
System (CTS); Lower layers of the CTS radio interface; Stage 2".
1.2 Abbreviations
Abbreviations used in the present document are listed in GSM 01.04.
2 Frequency bands and channel arrangement
i) Standard or primary GSM 900 Band, P-GSM:
For Standard GSM 900 band, the system is required to operate in the following frequency band:
890 - 915 MHz: mobile transmit, base receive
935 - 960 MHz: base transmit, mobile receive
ii) Extended GSM 900 Band, E-GSM (includes Standard GSM 900 band):
For Extended GSM 900 band, the system is required to operate in the following frequency band:
880 - 915 MHz: mobile transmit, base receive
925 - 960 MHz: base transmit, mobile receive
ETSI

---------------------- Page: 10 --
...