ETSI TR 103 343 V1.1.1 (2015-12)

Power Line Telecommunications (PLT); Powerline HDMI® analysis for very short range link HD and UHD applications

DTR/PLT-00044

General Information

• Status: Published
• Publication Date: 02-Dec-2015
• Technical Committee: PLT - Powerline Telecommunications
• Current Stage: 12 - Completion
• Due Date: 07-Dec-2015
• Completion Date: 03-Dec-2015

Standards Content (Sample)

ETSI TR 103 343 V1.1.1 (2015-12)






TECHNICAL REPORT
PowerLine Telecommunications (PLT);
®
Powerline HDMI analysis for very short range link
HD and UHD applications

---------------------- Page: 1 ----------------------
2 ETSI TR 103 343 V1.1.1 (2015-12)



Reference
DTR/PLT-00044
Keywords
powerline, video
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TR 103 343 V1.1.1 (2015-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Symbols and abbreviations . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
®
4 PLT HDMI bit rate targets . 9
4.1 Introduction . 9
4.2 Targets for HD support . 10
4.3 Targets for UHD support . 12
4.4 500 test links and bit rate . 12
5 Use cases . 14
5.1 Introduction . 14
5.2 Use case 1: Blu-ray™ digital television . 14
5.3 Use case 2: set-top box-digital television . 15
5.4 Use case 3: high resolution audio equipment links . 16
5.5 Use case 4: video source-video projector . 17
5.6 Use case 5: video surveillance in Smart Cities . 17
5.7 Use case 6: home theater system . 18
6 Analysed schemes . 19
6.1 Introduction . 19
6.2 Tandem schemes . 19
6.2.1 General . 19
6.2.2 JPEG 2000+PLT on 2 MHz to 100 MHz . 19
6.2.3 Dirac+PLT on 2 MHz to 100 MHz . 20
6.3 Joint schemes . 22
6.3.1 General . 22
6.3.2 SoftCast PLT on 2 MHz to 100 MHz . 22
6.4 Short summary of clause 6 . 23
7 Results for HD videos . 23
7.1 Introduction . 23
7.2 Considered test sequences . 23
7.2.1 General . 23
7.2.2 Used quality metrics . 24
7.2.3 Results with homogeneous PLT per carrier SNRs . 24
7.2.4 Results with more realistic PLT per carrier SNRs . 26
7.2.5 Short summary of clause 7 and related results in annex A . 28
8 Results for UHD videos . 28
8.1 Introduction . 28
8.2 Considered test sequences . 28
8.2.1 General . 28
8.2.2 Results with homogeneous PLT per carrier SNRs . 29
8.2.3 Results with more realistic PLT per carrier SNRs . 31
8.2.4 Short summary of clause 8 and related results in annex A . 36
9 Tandem schemes optimization . 36
9.1 Introduction . 36
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TR 103 343 V1.1.1 (2015-12)
9.2 Source encoder parameter optimization . 36
9.3 Source encoder resiliency to errors at the PLT level . 39
9.4 Short summary for clause 9 . 42
10 Rate controller . 42
10.1 Introduction . 42
10.2 Model of the variation of the channel characteristics . 43
10.2.1 General . 43
10.2.2 Permanent decrease of the PLT capacity . 43
10.2.3 Temporary decrease of the PLT capacity due to impulsive noise . 43
10.3 Mitigating the effect of PLT capacity variations . 44
10.3.1 General . 44
10.3.2 Encoding rate adaptation . 44
10.3.3 Layer filtering . 45
10.3.4 Determining the buffers size . 46
10.4 Illustration . 48
10.4.1 General . 48
10.4.2 Rate adaptation mechanism . 48
10.4.3 Illustration of the layer filtering approach . 50
10.5 Short summary of clause 10 . 53
11 Conclusions . 53
Annex A: Additional results on HD and UHD video sequences . 54
A.1 General . 54
A.2 Additional results on HD sequences . 54
A.3 Additional results on UHD sequences . 60
Annex B: State of the art . 63
Annex C: Bibliography . 67
History . 68


ETSI

---------------------- Page: 4 ----------------------
5 ETSI TR 103 343 V1.1.1 (2015-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Report (TR) has been produced by ETSI Technical Committee Powerline Telecommunications (PLT).
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
This Technical Report investigates how to transmit over the powerline medium HD and UHD contents that typically are
®
exchanged through the HDMI cable between transmitter video sources like Blu-ray™ players or set-top boxes and
receiver video sinks like video displays. The report also presents earlier findings. The scope of the Technical Report is
providing the technical elements needed to establish a PHDMI specification. The report is structured as follows: in
clause 4, the requirements in terms of target bit rate to be fulfilled by a PHDMI technology are presented for different
HD and UHD formats together with a set of PLT links used for testing purposes. It has to be underlined that the initial
target for phase 1 was only HD. It was however estimated that the market is rapidly moving towards UHD and it was
hence decided to enlarge the scope to also cover UHD. In clause 5, some target use cases are described: these scenarios
highlight the potential fields of application of a PHDMI technology. Clause 6 presents the schemes that have been
scrutinized as potential PHDMI technologies. Two of them are tandem schemes, i.e. systems that separate the channel
encoding part from the source encoding part, they are based upon the serial concatenation of a compression encoder
(based upon JPEG 2000 or Dirac) specifications and a OFDM power line modem operating in the 2 MHz to 100 MHz
band that is able to provide SISO-based or MIMO-based communication. Besides tandem scheme, a joint scheme
relying on the SoftCast paradigm has been also considered: it accommodates joint source and channel encoding. These
communication schemes have been tested on HD and UHD videos both on flat channel with AWGN and on realistic
PLT links (both SISO, MIMO 2×2 and MIMO 2×3): results are reported in terms of video quality metrics in clause 7
and clause 8. In particular, it is worth noticing that a realistic long video sequence was furnished by France Télévision
for this analysis. Clause 9 shows how to optimize the source encoder parameters for the tandem schemes: an interesting
point that it is also evaluated in this clause is the resiliency to errors at the PLT level, i.e. the investigation to see if it is
possible to tolerate some errors at the PLT level without requiring retransmission of wrong packets. Clause 10 presents
a scheme of a rate controller: it is the PHDMI component that manages the compression encoder rate as a function of
eventual changes of the PLT rate during the video transmission. Transmit and receive buffer requirements are also put
in evidence. Conclusion and final recommendations are reported in clause 11 of the present document.
NOTE: Blu-ray™ is an example of a suitable product available commercially. This information is given for the
convenience of users of the present document and does not constitute an endorsement by ETSI of this
product.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TR 103 343 V1.1.1 (2015-12)
1 Scope
®
The present document addresses Short Range Powerline modems for Very High Bit Rate links for both HDMI 1.x and
®
HDMI 2.0 interfaces.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] "High-Definition Multimedia Interface Specification Version 1.4b", October 2011.
®
[i.2] Consumer Electronic Association : "A DTV profile for uncompressed high speed digital
interfaces", CEA-861-D, July 2006.
[i.3] ETSI TR 101 562-3: "PowerLine Telecommunications (PLT); MIMO PLT; Part 3: setup and
statistical results of MIMO PLT channel and noise measurements".
[i.4] L. Yonge, J. Abad, K. Afkhamie, et al.: "An overview of the HomePlug AV2 technology", Journal
of Electrical and Computer Engineering, volume 2013, Article ID 892628, 20 pages, 2013.
Doi:10.1155/2013/892628.
[i.5] H. Chaouche, F. Gauthier, A. Zeddam, M. Tlich and M. Machmoum: "Time domain modeling of
powerline impulsive noise at its source", Journal of Electromagnetic Analysis and Applications,
3(9):9, 2011.
[i.6] J.A. Corteés, L. Diéz, F.J. Cañete, and J.J. Sanchez-Martinez: "Analysis of the indoor broadband
power-line noise scenario", IEEE Transactions on Electromagnetic Compatibility, 52(4):849-858,
November 2010.
[i.7] V. Degardin, M. Lienard, A. Zeddam, F. Gauthier and P. Degauque: "Classification and
characterization of impulsive noise on indoor powerline used for data communications", IEEE
Transactions on Consumer Electronics, 48(4):913-918, November 2002.
[i.8] D. Umehara, S. Hirata, S. Denno and Y. Morihiro: "Modeling of impulse noise for indoor
broadband power line communications", in Proc. International Symposium on Information Theory
and its Applications, ISITA2006, 2006.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TR 103 343 V1.1.1 (2015-12)
[i.9] D. Veronesi, R. Riva, P. Bisaglia, F. Osnato, K. Afkhamie, A. Nayagam, D. Rende and L. Yonge:
"Characterization of in-home MIMO power line channels", IEEE International Symposium on
Power Line Communications and Its Applications (ISPLC), pp.42-47, April 2011.
[i.10] A. Tomasoni, R.Riva and S.Bellini: "Spatial correlation analysis and model for in-home MIMO
power line channels", IEEE International Symposium on Power Line Communications and Its
Applications (ISPLC), pp.286-291, 2012.
[i.11] D. Rende, A. Nayagam, K. Afkhamie, L. Yonge, R. Riva, D. Veronesi, F. Osnato and P. Bisaglia:
"Noise correlation and its effect on capacity of inhome MIMO power line channels", IEEE
International Symposium on Power Line Communications and Its Applications (ISPLC), pp.60-65,
2011.
[i.12] M. Antonini, M. Barlaud, P. Mathieu and I. Daubechies: "Image coding using wavelet transform",
IEEE Transactions on Image Processing, volume 1, pp.205-220, April 1992.
[i.13] J. Shapiro: "Embedded image coding using zerotrees of wavelet coefficients", IEEE Transactions
on Signal Processing, volume 41, pp. 3445-3462, December 1993.
[i.14] A. Said and W. Pearlman: "A new, fast, and efficient image codec based on set partitioning in
hierarchical trees", IEEE Transactions on Circuit and Systems for Video Technology, volume 6,
pp.243-250, June 1996.
[i.15] N. Adami, A. Signoroni and R. Leonardi: "State-of-the-art and trends in scalable video
compression with wavelet-based approaches", IEEE Transactions on Circuit and Systems for
Video Technology, volume 17, number 9, pp.1238-1255, 2007.
[i.16] I. Daubechies and W. Sweldens, "Factoring wavelet transforms into lifting steps" Journal of
Fourier Analysis and Applications, vol.4, no.3, pp.247-269, 1998.
[i.17] D. Taubman and A. Zakhor: "Multirate 3-d subband coding of video", IEEE Transactions on
Image Processing, volume 3, pp.572-588, September 1994.
[i.18] J.-R. Ohm: "Three-dimensional subband coding with motion compensation", IEEE Transactions
on Image Processing, volume 3, pp.559-571, September 1994.
[i.19] S.-J. Choi and J. Woods: "Motion-compensated 3-D subband coding of video", IEEE Transactions
on Image Processing, volume 8, pp.155-167, February 1999.
[i.20] B. Pesquet-Popescu and V. Bottreau: "Three-dimensional lifting schemes for motion compensated
video compression", IEEE International Conference on Acoustic, Speech and Signal Processing
(ICASSP), volume 3, pp.1793-1796, 2001.
[i.21] S.-T. Hsiang and J. Woods: "Embedded image coding using zeroblocks of subband/wavelet
coefficients and context modeling", IEEE International Symposium on Circuits and Systems,
volume 3, pp.662-665, 2000.
[i.22] D. Taubman: "High performance scalable image compression with EBCOT", IEEE Transactions
on Image Processing, volume 9, pp.1158-1170, 2000.
[i.23] M. Kieffer and P. Duhamel: "Joint source-channel coding and decoding", 2014.
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TR 103 343 V1.1.1 (2015-12)
3 Symbols and abbreviations
3.2 Symbols
For the purposes of the present document, the following symbols apply:
b bit
dB decibel
G Giga
Hz Hertz
M Mega
s second
2D Bi-dimensional
3D Three-dimensional
64K 65536
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AVC Advanced Video Coding
AWGN Additive White Gaussian Noise
BBC British Broadcasting Corporation
BCJR Bahl Cocke Jelinek and Raviv
BER Bit Error Rate
CE Consumer Electronics
®
CEA Consumer Electronics Association
CR Compression Ratio
DC Direct Current
DCT Discrete Cosine Transform
DWT Discrete Wavelet Transform
EBCOT Embedded Block Coding with Optimized Truncation
EMI Electro Magnetic Interference
EZBC Embedded Zero-Block Coding
EZW Embedded Zero-Tree Wavelet coding
FEC Forward Error Correction
GoP Group of Pictures
HD High Definition
®
HDMI HD Multimedia Interface
HDTV High Definition TeleVision
HEVC High Efficiency Video Coding
ICT Irreversible Component Transformation
ITU International Telecommunication Union
L1 Level 1
L2 Level 2
LCD Liquid Crystal Display
LLSE Linear Least Square Error
LS Lifting Schemes
MAC Medium Access Control
MC Motion Compensation
MCTF Motion Compensated Temporal Filtering
MIMO Multiple Input Multiple Output
MPEG Moving Picture Experts Group
MSE Mean Square Error
MV Motion Vector
NAL Network Abstraction Layer
OFDM Orthogonal Frequency Division Multiplexing
PE Protective Earth
PHDMI Powerline HDMI
PHY PHYsical
ETSI

---------------------- Page: 8 ----------------------
9 ETSI TR 103 343 V1.1.1 (2015-12)
PLT PowerLine Telecommunications
PSD Power Spectral Density
PSNR Peak SNR
QAM Quadrature Amplitude Modulation
QF Quality Factor
QoS Quality of Service
RCT Reversible Component Transformation
RDO Rate Distortion Optimization
SD Standard Definition
SISO Single Input Single Output
SNR Signal to Noise Ratio
SPHIT Set Partitioning in HIerarchical Trees
SSIM Structural SIMilarity
SVC Scalable Video Coding
TDMA Time Division Multiple Access
UHD Ultra HD
UHDTV Ultra High Definition TeleVision
VLC Variable Length Code
VS Video Source
WSVC Wavelet-based Scalable Video Coding
WT Wavelet Transform
®
4 PLT HDMI bit rate targets
4.1 Introduction
The recent increase in HD video contents has brought the need to develop communication standards capable of multi-
®
gigabit per second throughput, like HDMI and Display Port. Consumer electronics (CE) users also want the flexibility
provided by wireless connections to set up and reconfigure multimedia systems, and to eliminate wired connections
required by HD multimedia systems, like home theatres.
Driven by these needs, the CE industry is developing formats capable of delivering uncompressed video, at the
necessary data rates, via wireless and wireline connections.
Simultaneously, PLT devices have become widespread and, in the latest specifications, are capable of data rates at the
physical (PHY) layer up to 1 Gbit/s for single input single output (SISO) implementations and up to 2 Gbit/s for
multiple input multiple output (MIMO) implementations.
These data rates are obtained for optimum channel conditions : taking into account PHY and medium access (MAC)
layer PLT overheads, it is clear that they are insufficient for streaming uncompressed HD video or for transferring HD
contents, like a HD film, as fast as would be desirable.
Uncompressed HD video transmission requires very high bit rates, up to 2 to 4 Gbit/s for Full HD video.
Uncompressed HD video transmission avoids compression at the transmitter and decompression at the receiver,
therefore providing:
a) lower latency which permits timing sensitive applications like multimedia applications and gaming;
b) higher interoperability between devices because, unlike compressed video transmission, the receiver device
just displays the video content and does not need to be able to decode the video codec;
c) no degradation in picture quality due to compression losses in the transmission.
The technologies specifically designed for video transmission organize the source devices (transmitters) and the sink
devices (receivers) into a short range powerline video network, that allows for example:
• Point to point uncompressed video transmission ;
• Point to multi point uncompressed video transmission.
ETSI
...