ETSI TS 186 005-2 V2.1.1 (2009-02)

Telecommunications and Internet Converged Services and Protocols for Advanced Networking (TISPAN); Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR); Part 2: Test Suite Structure and Test Purposes (TSS&TP)

RTS/TISPAN-06045-2-NGN-R2

General Information

• Status: Published
• Publication Date: 02-Feb-2009
• Technical Committee: TISPAN 6 - TISPAN Testing
• Current Stage: 12 - Completion
• Due Date: 25-Dec-2008
• Completion Date: 03-Feb-2009

Standards Content (Sample)

ETSI TS 186 005-2 V2.1.1 (2009-02)
Technical Specification


Telecommunications and Internet Converged Services and
Protocols for Advanced Networking (TISPAN);
Terminating Identification Presentation (TIP) and
Terminating Identification Restriction (TIR);
Part 2: Test Suite Structure and Test Purposes (TSS&TP)

---------------------- Page: 1 ----------------------
2 ETSI TS 186 005-2 V2.1.1 (2009-02)



Reference
RTS/TISPAN-06045-2-NGN-R2
Keywords
TIP, TIR, testing, TSS&TP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 186 005-2 V2.1.1 (2009-02)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 7
4 Test Suite Structure (TSS) . 7
5 Test Purposes (TP) . 8
5.1 Introduction . 8
5.1.1 TP naming convention . 8
5.2 User TPs for TIP . 8
5.2.1 Syntax requirements . 8
5.2.1.1 Terminating P-CSCF . 8
5.2.1.2 Terminating user equipment. 9
5.2.2 Originating user equipment . 14
5.3 Signalling procedures . 16
5.3.1 Requirements on the destination network side. 16
5.3.2 Terminating Identification Restriction (TIR) . 21
5.3.3 Communication diversion services . 22
5.3.4 Requirements on the originating network side. 24
5.3.5 Requirements on the interconnection with other IP network . 26
6 Compliance . 27
Annex A (informative): Bibliography . 28
History . 29

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 186 005-2 V2.1.1 (2009-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 2 of a multi-part deliverable covering Terminating Identification Presentation (TIP) and
Terminating Identification Restriction (TIR) as identified below:
Part 1: "Protocol Implementation Conformance Statement (PICS)";
Part 2: "Test Suite Structure and Test Purposes (TSS&TP)".
Part 3: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification".
The present version updates the references to the basic call specifications.
NOTE: Some new parts will be developed in the future.
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 186 005-2 V2.1.1 (2009-02)
1 Scope
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) of the Terminating Identification
Presentation (TIP) and Terminating Identification Restriction (TIR) services. Within the TISPAN NGN Release 1 Next
Generation Network (NGN) the TS 183 008 [3] Terminating Identification Presentation (TIP) and Terminating
Identification Restriction (TIR) PSTN/ISDN simulation services is specified.
A further part of the present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation
eXtra Information for Testing (PIXIT) proforma based on the present document.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] IETF RFC 2396: "Uniform Resource Identifiers (URI): Generic Syntax".
[2] IETF RFC 3261: "SIP: Session Initiation Protocol".
[3] ETSI TS 183 008 V2.8.0: "Telecommunications and Internet converged Services and Protocols for
Advanced Networking (TISPAN) PSTN/ISDN simulation services Terminating Identification
Presentation (TIP) and Terminating Identification Restriction (TIR) Protocol specification".
[4] ITU-T Recommendation E.164: "The international public telecommunication numbering plan".
[5] IETF RFC 2806: "URLs for Telephone Calls".
[6] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[7] ISO/IEC 9646-3: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)".
[8] ETSI TS 186 005-1: "Telecommunications and Internet Converged Services and Protocols for
Advanced Networking (TISPAN); Terminating Identification Presentation (TIP) and Terminating
Identification Restriction (TIR); Part 1: Protocol Implementation Conformance Statement (PICS)".
[9] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 2: Abstract Test Suite specification".
[10] ITU-T Recommendation Q.9: "Vocabulary of switching and signalling terms".
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 186 005-2 V2.1.1 (2009-02)
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] ETSI TS 186 009-2: "Telecommunications and Internet converged Services and Protocols for
Advanced Networking (TISPAN); SIP-ISUP Interworking between IP Multimedia (IM) Core
Network (CN) subsystem and Circuit Switched networks; Part 2: Test Suite Structure and Test
Purposes (TSS&TP)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
abstract test case: Refer to ISO/IEC 9646-1 [6].
Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 [6].
address identity: See Recommendation E.164 or/and RFC 2806 [5].
call: See ITU-T Recommendation Q.9 [10], definition 2201.
dialog: Refer to RFC 3261 [2].
final response: Refer to RFC 3261 [2].
header: Refer to RFC 3261 [2].
header field: Refer to RFC 3261 [2].
identity information: includes all the information (RFC 2806 [5]/RFC 2396 [1]/E.164 [4]) identifying a user, including
trusted (network generated) and/or untrusted (user generated) addresses
Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [6].
implicit send event: Refer to ISO/IEC 9646-3 [7].
lower tester: Refer to ISO/IEC 9646-1 [6].
method: Refer to RFC 3261 [2].
option-tag: Refer to RFC 3261 [2].
PICS proforma: Refer to ISO/IEC 9646-1 [6].
PIXIT proforma: Refer to ISO/IEC 9646-1 [6].
point of control and observation: Refer to ISO/IEC 9646-1 [6].
Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 [6].
Protocol Implementation eXtra Information for Testing (PIXIT): Refer to ISO/IEC 9646-1 [6].
provisional response: Refer to RFC 3261 [2].
proxy, proxy server: Refer to RFC 3261 [2].
request: Refer to RFC 3261 [2].
response: Refer to RFC 3261 [2].
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 186 005-2 V2.1.1 (2009-02)
session: Refer to RFC 3261 [2].
(SIP) transaction: Refer to RFC 3261 [2].
system under test: Refer to ISO/IEC 9646-1 [6].
tag: Refer to RFC 3261 [2].
Test Purpose (TP): Refer to ISO/IEC 9646-1 [6].
trusted identity: network generated user address information
untrusted identity: user generated user address information
voice session: existing voice connection between two terminal equipments
NOTE: example via RTP.
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AS Application Server
ATM Abstract Test Method
ATS Abstract Test Suite
CDIV Communication Diversion
CLIP Calling Line Identification Presentation
CLIR Calling Line Identification Restriction
CN Core Network
CSCF Call Session Control Function
IM IP Multimedia
IP Internet Protocol
ISDN Integrated Service Data Network
NGN Next Generation Network
P-CSCF Proxy - CSCF
PSTN Public Switched Telephone Network
RTP Real time Transport Protocol
SDP Session Description Protocol
SIP Session Initiation Protocol
TP Test Purposes
TSS Test Suite Structure
UA User Agent
UE User Equipment
URI Universal Resource Identifier
4 Test Suite Structure (TSS)
Syntax
Term_P-CSCF TIP_N01_xxx

TermUserE TIP_U01_xxx
OrigUserE TIP_U02_xxx
Signaling
DestNetw TIP_N02_xxx
TIR TIP_N03_xxx
CDIV TIP_N04_xxx
OrigNetw TIP_N05_xxx
OtherNetw TIP_N06_xxx

Figure 1: Test suite structure
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 186 005-2 V2.1.1 (2009-02)
5 Test Purposes (TP)
5.1 Introduction
For each test requirement a TP is defined.
5.1.1 TP naming convention
TPs are numbered, starting at 001, within each group. Groups are organized according to the TSS. Additional references
are added to identify the actual test suite and whether it applies to the network or the user (see table 1).
Table 1: TP identifier naming convention scheme
Identifier: __
= supplementary service: e.g. "TIP"
= type of IUT: U User
N Network
= group 2 digit field representing group reference according to TSS
= sequential number (001-999)

5.2 User TPs for TIP
All PICS items referred to in this clause are as specified in TS 186 005-1 [8] unless indicated otherwise by another
numbered reference.
5.2.1 Syntax requirements
5.2.1.1 Terminating P-CSCF
TSS TP TIP/TIR reference Selection expression
Syntax/Term_P-CSCF TIP_N01_001 4.4
Test purpose:
The P-CSCF sends a P-Asserted-Identity in a response as 'tel' or 'sip' URI in the international format.
Ensure that the IUT in order to present the identity of the terminating party upon receipt of a non - 100 response from
the terminating user the IUT (P-CSCF) shall send in a non 100 response message defined as SIP_MESSAGE_VA the
P-Asserted-Identity header containing valid 'tel' or/and sip URI in the international number format e.g. tel: global
number.
Comments:
UA C SUT UA S

INVITE  INVITE

SIP_MESSAGE_VA SIP_MESSAGE_VA
Conversation
BYE  BYE

200 OK (BYE) 200 OK (BYE)


Values for tests purposes TIP_N01_001
VA_01 180 Ringing
VA_02 183 Session progress
VA_03 200 OK

ETSI

---------------------- Page: 8 ----------------------
9 ETSI TS 186 005-2 V2.1.1 (2009-02)
5.2.1.2 Terminating user equipment
TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_001 Annex A PICS 1/2
Test purpose:
The Terminating UE sends a P-Preferred-Identity as 'tel' or 'sip' URI in the local number format.
Ensure that the Terminating UE in order to present a complete called party identity contained in the P-Preferred Identity
header sends in a non 100 response message defined as SIP_MESSAGE_VA containing a valid 'tel' and/or sip URI in
the local number format e.g. tel: local number.
Comments:
Test equipment SUT User equipment

INVITE  INVITE

SIP_MESSAGE_VA SIP_MESSAGE_VA
Conversation
BYE  BYE

200 OK (BYE) 200 OK (BYE)


TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_002 4.4 PICS 1/2
Test purpose:
The Terminating UE sends a P-Preferred-Identity as 'tel' or 'sip' URI in the international number format.
Ensure that the Terminating UE in order to present a complete called party identity contained in the P-Preferred Identity
header sends in a non 100 response message defined as SIP_MESSAGE_VA containing a valid 'tel' and/or sip URI in
the international number format e.g. tel: global number.
Comments:
Test equipment SUT User equipment

INVITE  INVITE

SIP_MESSAGE_VA SIP_MESSAGE_VA
Conversation
BYE  BYE

200 OK (BYE) 200 OK (BYE)

TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_003 4.4 PICS 1/2
Test purpose:
The Terminating UE sends a P-Preferred-Identity as 'tel' or 'sip' URI in the local number format; phone
context=particular phone prefox.
Ensure that the Terminating UE in order to present a complete called party identity contained in the P-Preferred Identity
header sends in a non 100 response message defined as SIP_MESSAGE_VA containing a valid 'tel' or/and sip URI in
the format: tel: local number ; phone-context= particular phone prefix.
Comments:
Test equipment SUT User equipment


INVITE INVITE
SIP_MESSAGE_VA  SIP_MESSAGE_VA
Conversation

BYE BYE
200 OK (BYE)  200 OK (BYE)


ETSI

---------------------- Page: 9 ----------------------
10 ETSI TS 186 005-2 V2.1.1 (2009-02)
TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_004 4.4 PICS 1/2
Test purpose:
The Terminating UE sends a P-Preferred-Identity as 'tel' or 'sip' URI in the local number format; phone context=domain
name
Ensure that the Terminating UE in order to present a complete called party identity contained in the P-Preferred Identity
header sends in a non 100 response message defined as SIP_MESSAGE_VA a valid 'tel' URI in the format: tel: local
number; phone-context= domain name e.g. tel: 4711; phone-context=example.com.
Comments:
Test equipment SUT User equipment

INVITE  INVITE
SIP_MESSAGE_VA  SIP_MESSAGE_VA
Conversation
BYE  BYE
200 OK (BYE)  200 OK (BYE)


TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_005 4.5 PICS 1/2
Test purpose:
The Terminating UE sends a P-Preferred-Identity as 'tel' or 'sip' URI in the global number format; isup=ISDN
subaddress.
Ensure that the Terminating UE in order to present a complete called party identity contained in the P-Preferred Identity
header sends a in a non 100 response message defined as SIP_MESSAGE_VA containing a valid 'tel' URI in the
format: tel: global number; isub= ISDN Subadress.
Comments:
UA C SUT User equipment

INVITE  INVITE

SIP_MESSAGE_VA SIP_MESSAGE_VA
Conversation
BYE  BYE

200 OK (BYE) 200 OK (BYE)


TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_006 4.4 PICS 1/2
Test purpose:
The Terminating UE sends a P-Preferred-Identity as 'tel' or 'sip' URI in the local number format; isup=ISDN
subaddress.
Ensure that the Terminating UE in order to present a complete calling party identity contained in the P-Preferred
Identity header sends a in a non 100 response message defined as SIP_MESSAGE_VA containing a valid 'tel' URI in
the format: tel: local number; isub= ISDN Subadress.
Comments:
Test equipment SUT User equipment


INVITE INVITE
SIP_MESSAGE_VA  SIP_MESSAGE_VA
Conversation

BYE BYE
200 OK (BYE)  200 OK (BYE)


ETSI

---------------------- Page: 10 ----------------------
11 ETSI TS 186 005-2 V2.1.1 (2009-02)
TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_007 4.4 PICS 1/2
Test purpose:
The Terminating UE sends a P-Preferred-Identity as 'tel' or 'sip' URI in the local number format; isup=ISDN
subaddress; phone context=particular phone prefix.
Ensure that the Terminating UE in order to present a complete calling party identity contained in the P-Preferred
Identity header sends in a non 100 response message defined as SIP_MESSAGE_VA message containing a valid 'tel'
URI in the format: tel: local number; isub= ISDN Subadress ; phone-context= particular phone prefix.
Comments:
Test equipment SUT User equipment

INVITE  INVITE
SIP_MESSAGE_VA  SIP_MESSAGE_VA
Conversation
BYE  BYE
200 OK (BYE)  200 OK (BYE)


TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_008 4.4 PICS 1/2
Test purpose:
The Terminating UE sends a P-Preferred-Identity as 'tel' or 'sip' URI in the local number format; phone context=domain
name.
Ensure that the Terminating UE in order to present a complete calling party identity contained in the P-Preferred
Identity header sends in a non 100 response message defined as SIP_MESSAGE_VA containing a valid 'tel' URI in the
format: tel: local number; phone-context= domain name e.g. tel: 4711 isub= ISDN Subadress;
phone-context=example.com.
Comments:
Test equipment SUT User equipment


INVITE INVITE
SIP_MESSAGE_VA  SIP_MESSAGE_VA
Conversation

BYE BYE
200 OK (BYE)  200 OK (BYE)


TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_009 4.5.2.5 PICS 1/2
Test purpose:
The Terminating UE sends a P-Preferred-Identity as 'tel' or 'sip' URI in the URI_USER format. Privacy is indicated with
Privacy header field value 'id'.
Ensure that the Terminating UE to request its identity to be kept private from the originating user shall include a Privacy
header with the privacy type of 'id' in any non 100 response message defined as SIP_MESSAGE_VA with a 'tel' and/or
sip URI defined as URI_USER.
Comments:
Test equipment SUT User equipment

INVITE  INVITE
SIP_MESSAGE_VA  SIP_MESSAGE_VA
Conversation
BYE  BYE
200 OK (BYE)  200 OK (BYE)


ETSI

---------------------- Page: 11 ----------------------
12 ETSI TS 186 005-2 V2.1.1 (2009-02)
Values for test purpose TIP_U01_009
URI_USER
VA_1 tel: local number
VA_2 tel: global number
VA_3 tel: local number ; phone-context= particular phone prefix.
VA_4 tel: local number ; phone-context= domainname
VA_5 tel: local number; isub= ISDN Subadress
VA_6 SIP URI sip:user:password@host:port;uri-parameters?headers
VA_7_ sip URI: local number @host:port;uri-parameters?headers
VA_8 sip URI: global number @host:port;uri-parameters?headers
VA_9 Sip URI: local number ; phone-context= particular phone prefix @host:port;uri-parameters?headers

TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_010 4.5.2.5 PICS 1/2
Test purpose:
The Terminating UE request privacy in a provisional or final response.
Ensure that the Terminating UE to keep private is sending the priv value 'id' in any non 100 response message defined
as SIP_MESSAGE_VA
Comments:
Test equipment SUT User equipment


INVITE INVITE

SIP_MESSAGE_VA SIP_MESSAGE_VA
Conversation

BYE BYE
200 OK (BYE)  200 OK (BYE)


Values for tests purposes TIP_U01_001 to TIP_U01_010
VA_01 180 Ringing
VA_02 183 Session progress
VA_03 200 OK

TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_011 4.5.2.12 PICS 2/6
Test purpose:
The Terminating UE supports the “from-change” tag in the Supported header.
Ensure that the Terminating UE supports the “from-change” tag in the Supported header. If the UE receives a “from-
change” tag in a Supported header in an initial INVTE, the UE sends the “from-change” tag in the Supported header in
any non 100 response message defined as SIP_MESSAGE_VA
SIP messages: INVITE: Suppoerted: from-change
   18x/200: Suppoerted: from-change
Comments:
Test equipment SUT User equipment

INVITE  INVITE

SIP_MESSAGE_VA SIP_MESSAGE_VA
Conversation

BYE BYE

200 OK (BYE) 200 OK (BYE)


ETSI

---------------------- Page: 12 ----------------------
13 ETSI TS 186 005-2 V2.1.1 (2009-02)
TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_012 4.5.2.12 PICS 2/7
Test purpose:
The Terminating UE sends an UPDATE request with an updated From and To header.
Ensure that the Terminating UE supports the “from-change” tag in the Supported header, the user equipment sends an
UPDATE request after the ACK for the 200 OK INVITE was received containing a connected identity in the From
header.
SIP messages: INVITE: Suppoerted: from-change
   18x/200: Suppoerted: from-change
   UPDATE: From
Comments:
Test equipment SUT User equipment

INVITE  INVITE

180 Ringing 180 Ringing
200 OK INVITE  200 OK INVITE
ACK  ACK

UPDATE  UPDATE
200 OK UPDATE  200 OK UPDATE
Conversation
BYE  BYE
200 OK (BYE)  200 OK (BYE)


TSS TP TIP/TIR reference Selection expression
Syntax/TermUserE TIP_U01_013 4.5.2.12
Test purpose:
The Terminating UE overrides a default “Presentation restriction” by sending Privacy “none”.
Ensure that the Terminating UE is able to override a default “Presentation restriction” by sending a Privacy header
value “none” in any non 100 response message defined as SIP_MESSAGE_VA
SIP messages: 18x/200: Privacy: “none”
Comments:
Test equipment SUT User equipment

INVITE  INVITE
SIP_MESSAGE_VA  SIP_MESSAGE_VA
Conversation
BYE  BYE
200 OK (BYE)  200 OK (BYE)

Values for tests purposes TIP_U01_011 and TIP_U01_013
VA_01 180 Ringing
VA_02 183 Session progress
VA_03 200 OK

ETSI

---------------------- Page: 13 ----------------------
14 ETSI TS 186 005-2 V2.1.1 (2009-02)
5.2.2 Originating user equipment
TSS TP TIP/TIR reference Selection expression
Syntax/OrigUserE TIP_U02_001 4.5.2.1 PICS 1/1
Test purpose:
The originating UE receives a P-Asserted-Identity.
Ensure that the Originating UE, receiving any non 100 response message defined as SIP_MESSAGE_VA containing a
P-Asserted-Identity heeder with a valid 'tel' and/or sip URI accepts the call following the basic request handling
procedures.
Comments:
User equipment SUT Test equipment


INVITE INVITE
SIP_MESSAGE_VA  SIP_MESSAGE_VA
Conversation

BYE BYE
200 OK (BYE)  200 OK (BYE)


TSS TP TIP/TIR reference Selection expression
Syntax/OrigUserE TIP_U02_002 4.5.2.1 PICS 1/1
Test purpose:
The originating UE receives more then one P-Asserted-Identity header
Ensure that the Originating UE, receiving any non 100 response message defined as SIP_MESSAGE_VA containing
more P-Asserted-Identity heeders with a valid 'tel' and/or sip URI
accepts the call following the basic request handling procedures.
Comments:
User equipment SUT UA S


INVITE INVITE
SIP_MESSAGE_VA  SIP_MESSAGE_VA
Conversation

BYE BYE
200 OK (BYE)  200 OK (BYE)


TSS TP TIP/TIR reference Selection expression
Syntax/OrigUserE TIP_U02_003 4.5.2.1 PICS 1/1
Test purpose:
The TIR service applies at the Terminating UE. The Privacy header field value 'id' indicates the service.
Ensure that the Originating UE, receiving any non 100 response message defined as SIP_MESSAGE_VA without
P-Asserted-Identity headers, but a Privacy header with privacy type of "id" is present, accepts the call following the
basic request handling procedures.
Comments:
UA C SUT Test equipment


INVITE INVITE
SIP_MESSAGE_VA  SIP_MESSAGE_VA
Conversation

BYE BYE
200 OK (BYE)  200 OK (BYE)


ETSI

---------------------- Page: 14 ----------------------
15 ETSI TS 186 005-2 V2.1.1 (2009-02)
TSS TP TIP/TIR reference Selection expression
Syntax/OrigUserE TIP_U02_004 4.5.2.1 PICS 1/1
Test purpose:
Privacy service applies at the Terminating UE. Neither P-Asserted-Identity nor Privacy header received.
Ensure that the Originating UE, receiving any non 100 response message defined as SIP_MESSAGE_VA without
P-Asserted-Identity headers nor a Privacy header with privacy type of "id" accepts the call following the basic request
handling procedures.
Comments:
User equipment SUT Test equipment


INVITE INVITE
SIP_MESSAGE_VA  SIP_MESSAGE_
...