ETSI TR 102 311 V1.2.1 (2015-11)

Fixed Radio Systems; Point-to-point equipment; Specific aspects of the spatial frequency reuse method

RTR/ATTM-04029

General Information

• Status: Published
• Publication Date: 05-Nov-2015
• Technical Committee: ATTM TM4 - Fixed Radio Systems
• Current Stage: 12 - Completion
• Due Date: 04-Dec-2015
• Completion Date: 06-Nov-2015

Standards Content (Sample)

ETSI TR 102 311 V1.2.1 (2015-11)






TECHNICAL REPORT
Fixed Radio Systems;
Point-to-point equipment;
Specific aspects of the spatial frequency reuse method

---------------------- Page: 1 ----------------------
2 ETSI TR 102 311 V1.2.1 (2015-11)



Reference
RTR/ATTM-04029
Keywords
DFRS, digital, DRRS, FWA, MIMO, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TR 102 311 V1.2.1 (2015-11)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Overview . 9
4.1 Capacity improvement of the MIMO system (Spatial Multiplexing) . 9
4.2 Difference between Cross-Polarization and Spatial Frequency Reuse (MIMO) . 11
4.3 Methods to achieve spatial frequency reuse . 13
4.3.1 Spatial configuration . 13
4.3.1.1 MIMO channel with spatial configuration . 13
4.3.1.2 MIMO System Model . 13
4.3.2 Spatial frequency reuse based on rich scattering . 14
4.3.3 Spatial frequency reuse based on link geometry . 15
4.3.3.1 Channel matrix pure line of sight case . 15
4.3.3.2 Maximal orthogonal condition and optimal antenna spacing . 18
4.3.3.3 Spatial diversity gain . 20
4.3.3.4 Working with antenna spacing below the sub-optimal condition . 20
4.3.3.5 Channel matrix considering link propagation . 21
4.3.3.6 Multi-polarized MIMO . 22
4.4 MIMO Performance . 22
4.5 The spatial frequency reuse canceller . 24
4.5.1 Open-Loop MIMO . 24
4.5.2 Closed-Loop MIMO . 25
4.5.3 MIMO receiver cancellation technique comparison . 27
5 Verification by field trial and simulation . 28
5.1 Overview . 28
5.2 5 GHz field trial . 28
5.2.1 MIMO channel measurement experiment - Aims . 28
5.2.2 MIMO channel measurement experiment - Configuration and plan . 29
5.2.3 MIMO channel measurement setup . 29
5.2.3.1 Tx setup . 29
5.2.3.2 RX setup . 29
5.2.3.3 Test results and analysis . 30
5.2.3.3.1 Results . 30
5.2.3.3.2 Analysis . 31
5.2.3.3.3 MIMO channel measurement experiment - Conclusions . 33
5.3 18 GHz field trial . 33
5.3.1 MIMO channel measurement experiment - Aims . 33
5.3.2 MIMO channel measurement experiment - Configuration and plan . 33
5.3.3 MIMO channel measurement setup . 33
5.3.4 Test results and analysis . 34
6 Verification by simulation . 35
6.1 The simulation block diagram . 35
6.2 The simulation results . 37
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TR 102 311 V1.2.1 (2015-11)
7 Void . 37
8 Practical implementation . 38
8.1 Overview . 38
8.2 Installation Issues . 38
8.3 Availability Calculation . 39
9 Summary . 39
Annex A: List of Topics to be considered in Standardization . 40
A.1 Topic List . 40
Annex B: Antenna Geometry and Composite Antenna RPE's . 41
B.1 Antenna Geometry . 41
B.2 Composite Antenna RPE's . 41
Annex C: MIMO Status in 2014 . 44
History . 45

ETSI

---------------------- Page: 4 ----------------------
5 ETSI TR 102 311 V1.2.1 (2015-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Report (TR) has been produced by ETSI Technical Committee Access, Terminals, Transmission and
Multiplexing (ATTM).
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
It has been known for a long time that in order to improve theoretically the capacity of a given communication channel
with maintaining the existing power at the transmitter and SNR at the receiver, the best solution is to dismantle the
aggregate single channel into independent orthogonal sub-channels all using the same carrier frequency. To this
theoretical improvement a considerable practical implementation can be added, given that with the distributing of
payload among sub-channels the required order of the modulation scheme can be reduced. One example of exploiting
this payload distribution method can be found in the existing "co-channel dual polarization" mode. With this
implementation the aggregate payload is distributed between the both orthogonal independent sub-channels - the two
perpendicular linear polarization carriers. The present document describes a new approach of orthogonalization , the
spatial frequency re-use. As in the case of polarization, in order to perform the separation at the receiver, a special
module should be incorporated - similar to the cross-polarization Interference Canceller (XPIC) - the Spatial Frequency
Reuse Canceller (SFRC). In general, the SFR method is not limited to only two sub-channels as in the CCDP case, and
systems that use it are able to double, triple or multiple the spectral efficiency without any trade off on the system gain
as it is normally the case with improving the spectral efficiency by going to high order QAM modulation.
The present document includes an updated view of the SFR scheme using Multiple Antenna Techniques (MIMO).
Furthermore, some theoretical aspect reviews, installation issues, results from a new in field trial, considerations about
planning and, in the end, a living list for relevant standards modifications have been added.
Main changes reported in the present document are related to the MIMO system model, performance with non-optimal
antenna spacings, installation issue, new field trial, antenna composite RPE and MIMO deployment status in Europe.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TR 102 311 V1.2.1 (2015-11)
1 Scope
The present document provides, initially, a theoretical overview of how point-to-point systems that use SFRC could
improve the link capacity and/or system gain, or could focus power in different directions or cover an area. Focus is put
on LOS links.
In general these different results may "compete" with one another and for example an increase of capacity may require
an increase of system gain. Few basic methods for implementing SFR are provided in the present document.
Simulation and field trial results are provided in order to show the discussed techniques and the main improvements for
the SFRC over the "Internal" Co-Channel Interference (ICCI).
Main report subjects:
• Increase the link capacity (by increasing the spectral efficiency).
• Increase the link system gain (by increasing the receiver SNR).
• Methods of implementing SFR (by using MIMO).
• Verification by simulations and trials.
• Improvement parameter definition.
• Planning matters (installation issues and availability calculation).
• Living list for standard modifications.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Recommendation ITU-R F.699: "Reference radiation patterns for fixed wireless system antennas
for use in coordination studies and interference assessment in the frequency range from 100 MHz
to about 70 GHz".
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TR 102 311 V1.2.1 (2015-11)
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
2 H
Eigenvalue ( λ ): Eigenvalues of the matrix H × H are the root of the characteristic equation:
H 2
det( H × H − λ I ) = 0

expectation (E ): weighted average value of a Random Variable over all possible realizations that the Random
H
Variable may assume
NOTE 1: The weight coefficients are the probability value that the Random Variable assumes that value.
NOTE 2: Subscript "H" refers to the name of the Random Variable, for the reference scope "H" is the Channel
Matrix.
EXAMPLE: Mathematical formulation:
- discrete scalar random variable "X": "X" takes values "x , x …" with probabilities "p , p …"
1 2 1 2
∞
E[]X = x × p
∑ i i
i=1

- continuous scalar random variable "X": "X" takes continuous values and f(x) is the probability
density function
+∞
E[]X = x × f()x ⋅ dx
∫
−∞

- Matrix Random Variable "H":
h h . . h
⎡ ⎤
11 12 1M
⎢ ⎥
h h . . h
21 22 2M
⎢ ⎥
⎢ ⎥
E[]H = E . . . . . =
H NM
⎢ ⎥
... ... ... ... ...
⎢ ⎥
⎢ ⎥
h h . . h
⎣ N1 N 2 NM
⎦
E[]h E[h] . . E[h ]
⎡ ⎤
11 12 1M
⎢ ⎥
E[]h E[h ] . . E[h ]
21 22 2M
⎢ ⎥
⎢ ⎥
= . . . . .
⎢ ⎥
... ... ... ... ...
⎢ ⎥
⎢ ⎥
E[]h E[h ] . . E[h ]
N1 N 2 NM
⎣ ⎦

Hadamard product ( ◦): operation that takes two matrices of the same dimensions, and produces another matrix where
each element "ij" is the product of elements "ij" of the original two matrices
H
Hermitian transpose (·) : N × M matrix "H" with complex entries is the M × N "H*" matrix obtained from "H" by
taking the transpose and then taking the complex conjugate of each matrix entries
NOTE: Also known as Complex Transpose.
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TR 102 311 V1.2.1 (2015-11)
matrix trace (Tr): trace of an N × N square matrix "Q" is defined to be the sum of the elements on the main diagonal
N N
Tr()Q = q + q + .q = q = λ
11 22 NN ∑ ii ∑ i
i=1 i=1

power constraint: constraint applicable to the total transmission power level of the MIMO system (P ) with respect
MIMO
to the transmitted power level by the SISO system (P )
SISO
NOTE: If the MIMO system transmits the same power level of the reference SISO system then the power
constraint holds. Otherwise if P is higher than P , e.g. in case of
MIMO SISO
N × M MIMO P = N × P , the constraint does not hold.
MIMO SISO
singular value (λ): defined as the square root of the Eigenvalues
3.2 Symbols
For the purposes of the present document, the following symbols apply:
α Transmission Power Weight (for Water Filling/Pouring)
A Free Space Loss and Fading Attenuation Effects Matrix
argmin(.) Argument which minimize the brackets content
B Bandwidth
C Capacity [bit/s/Hz]
dB decibel
dBc decibel relative to mean carrier power
dBi decibel relative to an isotropic radiator
dBm decibel relative to 1 milliWatt
dBW decibel relative to 1 Watt
d Optimal Distance between Antennas
opt
E Expectation over variable H
H
H NxM Channel Matrix
I Unitary Matrix
λ Singular Value of Channel Matrix (H)
2 H
λ Eigenvalue of Matrix H·H
M Number of Transmit Antennas
m Modulation Order
N Number of Receive Antennas
N Noise Power Spectral Density
0
P Transmission Power Level
P Transmission Power Level of MIMO system (total)
MIMO
P Transmission Power Level of SISO system
SISO
ppm parts per million
ρ SNR
S̅ Average Received Power
X Polarization Effects Matrix (XPD)
det Matrix Determinant
Tr Matrix Trace
◦ Hadamard Product
|·| Absolute Value
H
(·) Hermitian Transpose
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AWGN Added White Gaussian Noise
BER Bit Error Ratio
BLAST Bell Laboratories Layered Space Time
C/N Carrier to Noise
CCDP Co-Channel Dual Polarization
CEPT Comité Européen des Postes et Télécommunications
CS Channel Separation
ETSI

---------------------- Page: 8 ----------------------
9 ETSI TR 102 311 V1.2.1 (2015-11)
CTF Channel Transfer Function
ECC Electronic Communication Committee
FS Fixed Service
ICCI "Internal" Co-Channel Interference
IDU InDoor Unit
ITU-R International Telecommunication Union - Radiocommunication
LOS Line Of Sight
MIMO Multiple Input Multiple Output
ML Maximum-Likelihood
MMSE Minimum Mean Square Error
MP Multi-Path
MSE Mean Square Error
MW MicroWave
nLOS near-Line Of Sight
NLOS Non-Line Of Sight
PP Point-to-Point
PTP Point To Point
QAM Quadrature Amplitude Modulation
RF Radio Frequency
RIC Radio Interface Capacity
RPE Radiation Power Envelope
RSL Received Strength Level
Rx Receiver
SAW Surface Acoustic Wave
SDG Spatial Diversity Gain
SFR Spatial Frequency Re-use
SFRC Spatial Frequency Reuse Canceller
SISO Single Input Single Output
SNR Signal to Noise Ratio
STD Standard Deviation
SVD Singular Value Decomposition
T Symbol Period
Tx Transmitter
UCA Uniform Circular Array of antenna
ULA Uniform Linear Array of antenna
URA Uniform Rectangular Array of antenna
VBLAST Vertical Bell Laboratories Layered Space Time
XPD Cross-Polarization Discrimination
XPIC Cross-Polarization Interference Canceller
ZF Zero-Forcing
4 Overview
4.1 Capacity improvement of the MIMO system (Spatial
Multiplexing)
For an N × N MIMO systems the "Spatial Multiplexing" refers to the promising Capacity improvement. Basically, "N"
independent orthogonal sub-channels, are provided on the same communication channel (CS), then the SISO maximal
achievable spectral efficiency (C) is multiplied by a factor "N" without adding any power resource (i.e. for the MIMO
system the single transmitter level is P/N). Figure 4.1 shows a Single Input Single Output (SISO) system compared with
a Multiple Input Multiple Output (MIMO) using the same physical resource i.e. the given channel (CS).
This is valid only in some conditions: when the sub-channels are orthogonal or independent which means that the
statistical expectation of the product of samples of the signals taken from any pair of the independent sub-channel is
very low or ideally null.
ETSI

---------------------- Page: 9 ----------------------
10 ETSI TR 102 311 V1.2.1 (2015-11)
For the purpose of such capacity improvement any orthogonalization method is valid, either polar or spatial. In addition
to the theoretical capacity improvement there is also the available practical improvement. In practice the division of the
aggregate payload among the sub-channels facilitates lowering the order of the modulation. For example, aggregate
capacity of 156 Mbit/s over 28 MHz, when divided between two sub-channels, each one of them carrying only
78 Mbit/s over 28 MHz channel. In comparison, a single channel payload implementation requires 128 QAM
constellations, while with the sub-channel approach a 16 QAM per carrier is sufficient. From the equations in figure 4.1
it can be concluded that the theoretical difference between the two approaches is 9 dB, however due to practical
considerations such as linearity and phase noise, the gain improvement is higher, i.e. around 11 dB.

SISO system
single channel
P SNR
Transmitter
Receiver
C   log (SNR)

∝
2



MIMO system
N orthogonal sub-channels

1
P/N SNR/N
2
P/N SNR/N
Receiver
Transmitter
3
P/N SNR/N
N
P/N SNR/N
C N log (SNR)
∝
2



Figure 4.1: Comparison between SISO system and MIMO system
ETSI

---------------------- Page: 10 ----------------------
11 ETSI TR 102 311 V1.2.1 (2015-11)
4.2 Difference between Cross-Polarization and Spatial
Frequency Reuse (MIMO)
Unlike from the cross-polarization case, e.g. used in CCDP systems, where the Cross Polarization Discrimination
(XPD) in "normal" conditions limits that the energy of one polarization signal falls back into the other polarization
status, in a spatial frequency reuse system the energy of all sub-channels are at similar levels and all mixed together
creating a lot of mutual interference between sub-channels.
Figure 4.2 compares the receiving sections of a cross-polarization system against spatial frequency reuse system
(2 × 2 MIMO). The meanings of the variables in the figure 4.2 are:
i
• r : received signal component at antenna element i-th (i = 1, 2) generated by the transmitted signal x .
xi i
i
• y : i-th (i = 1, 2) demodulated signal component generated by transmitted signal x and received at antenna
xi i
element i-th (i = 1, 2).
i 1 1 1 2 2 2
• r : the whole received signal at antenna element i-th (i.e. r = r + r and r = r + r ).
x1 x2 x1 x2
i 1 1 1 1 1 1
y : the whole demodulated signal from antenna element i-th (i.e. y = y + y and y = y + y ).
•
x1 x2 x1 x2
Thus two cases arise:
1) Cross-Polarization System
In this system two antennas, one for each polarization status (e.g. horizontal and vertical) are present.
In an ideal case without any cause of depolarization, e.g. the antenna XPD is high enough and no rain or other
atmospheric phenomena are active, at V-polarized antenna (i = 1) the received signal power level of the
1
V-polarized transmitted signal (r ) is much higher than the received signal power level of the H-polarized
x1
1
transmitted signal (r ). The same stands with inversed behaviour between the polarization status signals for
x2
the second antenna (i = 2).
XPIC algorithm cancels the self-interference of the unwanted polarization signal, for example H for the first
antenna and V for the second one.
2) Spatial Frequency Reuse (MIMO) System
Even in this system two antennas, or more, are present but they may use the same polarization (in the example
the vertical one).
1 1 2 2
In this case the received signal components, the couple (r , r ) for antenna 1 and (r , r ) for antenna 2,
x1 x2 x1 x2
at each antenna have similar power level and the received signal components are not orthogonal to each other.
Thus the difference in the phase of the signals, due to different sub-channel paths (space diversity), generated
1 2
by MIMO antenna arrangement forms a kind of "orthogonality" or diversity between y and y .
An SFRC algorithm can facilitate the separation of the mixed input signals for data detection and, as well, the
cancellation of the generated self-interference preventing any degradation on the received threshold.
NOTE: Orthogonality between two signals can be defined as a zero expectation of their sampled product over the
symbol period T.
Spatial Frequency Reuse and Cross-Polarization may be exploited together in order to increase the number of
independent sub-channels (Multi-Polarized MIMO).
ETSI

---------------------- Page: 11 ----------------------
12 ETSI TR 102 311 V1.2.1 (2015-11)

Figure 4.2: Cross-polarization versus spatial frequency reuse
ETSI

---------------------- Page: 12 ----------------------
13 ETSI TR 102 311 V1.2.1 (2015-11)
4.3 Methods to achieve spatial frequency reuse
4.3.1
...