ETSI TS 102 545-1 V1.2.1 (2009-02)

Broadband Radio Access Networks (BRAN); HiperMAN; Conformance Testing for WiMAX/HiperMAN 1.3.1; Part 1: Protocol Implementation Conformance Statement (PICS) proforma

RTS/BRAN-004T008-1-R1

General Information

• Status: Published
• Publication Date: 01-Feb-2009
• Technical Committee: BRAN - Broadband Radio Access Networks
• Current Stage: 12 - Completion
• Due Date: 16-Jan-2009
• Completion Date: 02-Feb-2009

Standards Content (Sample)

ETSI TS 102 545-1 V1.2.1 (2009-02)
Technical Specification


Broadband Radio Access Networks (BRAN);
HiperMAN;
Conformance Testing for WiMAX/HiperMAN 1.3.1;
Part 1: Protocol Implementation Conformance
Statement (PICS) proforma

---------------------- Page: 1 ----------------------
2 ETSI TS 102 545-1 V1.2.1 (2009-02)



Reference
RTS/BRAN-004T008-1-R1
Keywords
ATS, broadband, DLC, FWA, HiperMAN, MAC,
point-to-multipoint, radio, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
© WIMAX Forum 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 545-1 V1.2.1 (2009-02)
Contents
Intellectual Property Rights.7
Foreword.7
1 Scope.8
2 References.8
2.1 Normative references.8
2.2 Informative references.9
3 Definitions, symbols and abbreviations .9
3.1 Definitions.9
3.2 Symbols.10
3.3 Abbreviations.10
4 Conformance to this PICS Proforma Specification.10
Annex A (normative): Protocol ICS (PICS) for HiperMAN/WiMAX- TWG profile.11
A.1 Guidance for completing PICS Proforma.11
A.1.1 Purposes and Structure .11
A.1.2 Abbreviations and Conventions .11
A.1.3 Instructions for completing the PICS Proforma .13
A.2 Identification of the implementation .13
A.2.1 Date of statement.13
A.2.2 Implementation Under Test (IUT) identification .13
A.2.3 System Under Test (SUT) identification.14
A.2.4 Product supplier.14
A.2.5 Client (if different from product supplier).14
A.2.6 PICS contact person .14
A.3 Identification of the standard.14
A.4 Global statement of conformance.14
A.5 System profiles.15
A.5.1 WirelessMAN-OFDMA 802.16e .15
A.5.1.1 Mobile Station.17
A.5.1.1.1 PHY functions.17
A.5.1.1.1.1 m Factor.17
A.5.1.1.1.2 Cyclic Prefix.17
A.5.1.1.1.3 Frame Duration.17
A.5.1.1.1.4 UL and DL Subframe Size .18
A.5.1.1.1.5 Subcarrier Allocation Mode .19
A.5.1.1.1.6 UL Channel Sounding.19
A.5.1.1.1.7 Ranging and Band Width Request.19
A.5.1.1.1.8 Fast Feedback.20
A.5.1.1.1.9 Channel Coding.20
A.5.1.1.1.10 HARQ.21
A.5.1.1.1.11 Control Mechanism.23
A.5.1.1.1.12 Power Control.23
A.5.1.1.1.13 Channel Quality Measurements.24
A.5.1.1.1.14 Modulation.24
A.5.1.1.1.15 MAP Support.25
A.5.1.1.1.16 Multiple Input Multiple Output (MIMO) .26
A.5.1.1.1.17 MS Minimum Performance Requirements.27
A.5.1.1.1.18 Minimum Transmit Requirements.32
A.5.1.1.1.19 Receive Requirements Table.33
A.5.1.1.2 MS MAC functions.33
A.5.1.1.2.1 Packet Convergence Sublayer .33
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 545-1 V1.2.1 (2009-02)
A.5.1.1.2.2 MAC common part sub layer .34
A.5.1.2 Base Station.47
A.5.1.2.1 PHY functions.47
A.5.1.2.1.1 Sampling Factor.47
A.5.1.2.1.2 Cyclic Prefix.48
A.5.1.2.1.3 Frame Duration.48
A.5.1.2.1.4 TTG/RTG.48
A.5.1.2.1.5 UL and DL Subframe Size .49
A.5.1.2.1.6 Subcarrier Allocation Mode .50
A.5.1.2.1.7 UL Channel Sounding.50
A.5.1.2.1.8 Ranging and Band Width Request.50
A.5.1.2.1.9 Fast Feedback.51
A.5.1.2.1.10 Channel Coding.51
A.5.1.2.1.11 HARQ.52
A.5.1.2.1.12 Control Mechanism.52
A.5.1.2.1.13 Power Control.53
A.5.1.2.1.14 Channel Quality Measurements.53
A.5.1.2.1.15 Modulation.53
A.5.1.2.1.16 MAP Support.55
A.5.1.2.1.17 Multiple Input Multiple Output (MIMO) .55
A.5.1.2.1.18 BS Performance Requirements.56
A.5.1.2.1.19 Minimum Transmit Requirements.59
A.5.1.2.1.20 Receive Requirements.59
A.5.1.2.1.21 BS Synchronization.59
A.5.1.2.2 BS MAC functions.60
A.5.1.2.2.1 Packet Convergence Sublayer .60
A.5.1.2.2.2 MAC common part sub layer .61
A.6 List of PDUs, MAP IEs, sub-headers, and extended sub-headers.74
A.6.1 PDUs for MAC layer.74
A.6.1.1 PDUs for network entry and initialization .74
A.6.1.2 PDUs for service flows .75
A.6.1.3 PDUs for ARQ.76
A.6.1.4 PDUs for miscellaneous capabilities .77
A.6.1.5 PDUs for security .78
A.6.1.6 PDUs for Sleep Mode.79
A.6.1.7 PDUs for Handover .80
A.6.1.8 PDUs for Idle mode .81
A.6.1.9 PDUs for Feedback.81
A.6.1.10 PDUs and MAP IEs for Power Control .82
A.6.1.11 PDUs for band AMC .83
A.6.2 MAP IEs.84
A.7 PDU fields.87
A.7.1 Fields of PDUs for MAC layer.87
A.7.1.1 DL-MAP.87
A.7.1.2 DCD.88
A.7.1.3 UCD.89
A.7.1.4 UL-MAP.90
A.7.1.5 RNG-REQ and RNG-RSP .91
A.7.1.6 SBC-REQ and SBC-RSP.92
A.7.1.7 ARQ messages.94
A.7.1.8 RES-CMD.95
A.7.1.9 CLK-CMP.95
A.7.1.10 DREG-REQ and DREG-CMD .95
A.7.1.11 DSX-RVD.96
A.7.1.12 REP-REQ and REP-RSP .96
A.7.1.13 FPC.97
A.7.1.14 REG-REQ and REG-RSP.97
A.7.1.15 PKM-REQ and PKM-RSP Messages .99
A.7.1.16 DSA-REQ, DSA-RSP and DSA-ACK messages .102
A.7.1.17 DSC-REQ, DSC-RSP and DSC-ACK messages.104
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 545-1 V1.2.1 (2009-02)
A.7.1.18 DSD-REQ and DSD-RSP messages.105
A.7.1.19 TLVs for Handover, Sleep and Idle Mode.105
A.7.1.20 MOB_NBR-ADV .107
A.7.1.21 MOB_SCN-REQ.108
A.7.1.22 MOB_SCN-RSP.108
A.7.1.23 MOB_SCN-REP.109
A.7.1.24 MOB_BSHO-REQ.109
A.7.1.25 MOB_BSHO-RSP.110
A.7.1.26 MOB_MSHO-REQ.110
A.7.1.27 MOB_HO-IND.110
A.7.1.28 PDUs fields for Idle Mode.111
A.7.1.29 Feedback.111
A.7.1.30 NSP Selection.112
Annex B (normative): Protocol ICS (PICS) for HiperMAN/WiMAX- ETWG profile .113
B.1 Guidance for completing PICS Proforma.113
B.1.1 Purposes and Structure .113
B.1.2 Abbreviations and Conventions .113
B.1.3 Instructions for completing the PICS Proforma .115
B.2 Identification of the implementation .115
B.2.1 Date of statement.115
B.2.2 Implementation Under Test (IUT) identification .115
B.2.3 System Under Test (SUT) identification.115
B.2.4 Product supplier.116
B.2.5 Client (if different from product supplier).116
B.2.6 PICS contact person .116
B.3 Identification of the standard.116
B.4 Global statement of conformance.116
B.5 System profiles.117
B.5.1 WirelessMAN-SC.117
B.5.2 WirelessMAN-SCa.117
B.5.3 WirelessMAN-OFDM and WirelessHUMAN-OFDM .117
B.5.3.1 MS in PMP topology .119
B.5.3.1.1 PHY functions.119
B.5.3.1.2 Convergence sub layer .127
B.5.3.1.3 MAC common part sub layer.129
B.5.3.1.4 Construction and Transmission of MAC PDUs .130
B.5.3.1.5 MAC procedures for Mobility Management.136
B.5.3.1.5.1 Data delivery services.136
B.5.3.1.5.2 Sleep Mode.137
B.5.3.1.5.3 Neighbour advertisement.137
B.5.3.1.5.4 Handover.138
B.5.3.1.5.5 Idle Mode .139
B.5.3.1.6 Security.140
B.5.3.2 MS in MESH topology .142
B.5.3.3 BS in PMP topology .143
B.5.3.3.1 PHY functions.143
B.5.3.3.2 Convergence sub layer .149
B.5.3.3.3 MAC common part sub layer.150
B.5.3.3.4 Construction and Transmission of MAC PDUs .151
B.5.3.3.5 MAC procedures for Mobility Management.157
B.5.3.3.5.1 Data delivery services.157
B.5.3.3.5.2 Sleep Mode.157
B.5.3.3.5.3 Network advertisement.158
B.5.3.3.5.4 Handover.158
B.5.3.3.5.5 Idle Mode .160
B.5.3.3.6 Security.161
B.5.3.4 BS in MESH topology .163
B.5.4 WirelessMAN-OFDMA and WirelessHUMAN-OFDMA.163
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 102 545-1 V1.2.1 (2009-02)
B.6 List of PDUs and their directions.164
B.6.1 Void.164
B.6.2 PDUs for MAC layer.164
B.6.2.1 PDUs for MAC layer in PMP topology.164
B.6.2.1.1 PDUs for network entry and initialization in PMP .164
B.6.2.1.2 PDUs for service flows in PMP .165
B.6.2.1.3 PDUs for ARQ in PMP.166
B.6.2.1.4 PDUs for miscellaneous capabilities in PMP.166
B.6.2.1.5 PDUs for privacy in PMP .
...