ETSI TS 103 571-3 V1.1.1 (2019-06)

Core Network and Interoperability Testing (INT); Diameter Conformance testing for the Sh/Dh interfaces; (3GPPTM Release 13); Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro forma specification

DTS/INT-00138-3

General Information

• Status: Published
• Publication Date: 20-Jun-2019
• Technical Committee: INT - Core Network and Interoperability Testing
• Current Stage: 12 - Completion
• Due Date: 05-Jul-2019
• Completion Date: 21-Jun-2019

Standards Content (Sample)

ETSI TS 103 571-3 V1.1.1 (2019-06)






TECHNICAL SPECIFICATION
Core Network and Interoperability Testing (INT);
Diameter Conformance testing for Sh/Dh interfaces;
(3GPP™ Release 13);
Part 3: Abstract Test Suite (ATS) and partial Protocol
Implementation eXtra Information for Testing (PIXIT)
pro forma specification



---------------------- Page: 1 ----------------------
2 ETSI TS 103 571-3 V1.1.1 (2019-06)



Reference
DTS/INT-00138-3
Keywords
ATS, conformance, diameter, PIXIT
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2019.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 103 571-3 V1.1.1 (2019-06)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Abstract Test Method (ATM) . 7
4.1 Introduction . 7
4.2 Test architecture . 8
4.2.1 Test method . 8
4.2.2 Test machine configuration. 8
4.2.2.1 Test configurations using Sh interface . 8
4.2.2.2 Test configurations using Dh interface . 9
4.2.3 Interconnection of TS and SUT . 9
4.2.3.1 HSS Role . 9
4.2.3.2 AS Role . 10
4.2.3.3 SLF Role . 10
4.2.3.4 Test Adapter . 11
5 ATS conventions . 11
5.1 Introduction . 11
5.2 Testing conventions . 11
5.2.1 Test cases Preamble and Postamble . 11
5.3 Naming conventions . 12
5.3.1 General guidelines . 12
5.3.2 Test case grouping . 12
5.3.3 Test case identifiers . 13
Annex A (normative): DIAMETER Sh/Dh Partial PIXIT pro f orma . 14
A.1 The right to copy . 14
A.2 Identification summary. 14
A.3 ATS summary . 14
A.4 Test laboratory . 14
A.5 Client identification . 14
A.6 SUT . 15
A.7 Protocol layer information. 15
A.7.1 Protocol identification . 15
A.8 PIXIT items . 15
A.8.1 Introduction . 15
A.8.2 Port and Address items . 15
A.8.3 Sh/Dh interface items . 16
A.8.4 LibCommon items . 16
Annex B (normative): DIAMETER Sh/Dh Abstract Test Suite (ATS) . 17
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 103 571-3 V1.1.1 (2019-06)
B.1 The TTCN-3 Module. 17
History . 18

ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 103 571-3 V1.1.1 (2019-06)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability
Testing (INT).
The present document is part 3 of a multi-part deliverable. Full details of the entire series can be found in part 1 [3].
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 103 571-3 V1.1.1 (2019-06)
1 Scope
The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information
for Testing (PIXIT) pro forma for the test specifications for Diameter protocol on the Sh/Dh interfaces as specified in
ETSI TS 129 328 [1] and ETSI TS 129 329 [2] in compliance with the relevant requirements and in accordance with the
relevant guidance given in ISO/IEC 9646-7 [7] and ETSI ETS 300 406 [8].
The test notation used in the ATS is TTCN-3 (see ETSI ES 201 873-1 [9]).
The following test specification and design considerations can be found in the body of the present document:
• the overall test suite structure;
• the testing architecture;
• the test methods and port definitions;
• the test configurations;
• TTCN styles and conventions;
• the partial PIXIT pro forma;
• the modules containing the TTCN-3 ATS.
Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) Pro forma.
Annex B provides the Abstract Test Suite (ATS) part of the ATS.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI TS 129 328 (V13.10.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); LTE; IP Multimedia (IM) Subsystem Sh
interface; Signalling flows and message contents (3GPP TS 29.328 version 13.10.0 Release 13)".
[2] ETSI TS 129 329 (V13.1.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); LTE; Sh interface based on the Diameter
protocol; Protocol details (3GPP TS 29.329 version 13.1.0 Release 13)".
[3] ETSI TS 103 571-1: "Core Network and Interoperability Testing (INT); Diameter Conformance
testing for Sh/Dh interfaces; (3GPP™ Release 13); Part 1: Protocol Implementation Conformance
Statement (PICS)".
[4] ETSI TS 103 571-2: "Core Network
...