ETSI EN 301 908-25 V15.1.1 (2024-10)

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 25: New Radio (NR) User Equipment (UE) Release 15

DEN/MSG-TFES-15-25

Celična omrežja IMT - Harmonizirani standard za dostop do radijskega spektra - 25. del: Nova radijska (NR) uporabniška oprema (UE), izdaja 15

General Information

• Status: Not Published
• Technical Committee: MSG TFES - Task Force for European Standards for IMT-2000
• Current Stage: 12 - Completion
• Completion Date: 24-Oct-2024
• Ref Project: SIST EN 301 908-25 V15.1.1:2025 - IMT cellular networks - Harmonised Standard for access to radio spectrum - Part 25: New Radio (NR) User Equipment (UE) Release 15

Standards Content (Sample)

Draft ETSI EN 301 908-25 V15.0.0 (2024-07)

HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 25: New Radio (NR) User Equipment (UE) Release 15

2 Draft ETSI EN 301 908-25 V15.0.0 (2024-07)

Reference
DEN/MSG-TFES-15-25
Keywords
3GPP, 5G, cellular, IMT, IMT-2000,
IMT-Advanced, mobile, NR, radio, regulation

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 Draft ETSI EN 301 908-25 V15.0.0 (2024-07)
Contents
Intellectual Property Rights . 9
Foreword . 9
Modal verbs terminology . 10
Introduction . 10
1 Scope . 11
1.0 General . 11
1.1 Operating bands in FR1 . 11
1.2 Operating bands in FR2 . 14
1.3 Operating bands for Range 1 and Range 2 interworking operation with other radios . 15
1.3.1 Inter-band EN-DC within FR1. 15
1.3.1a Void . 15
1.3.2 Inter-band EN-DC including FR2 . 15
1.3.3 Inter-band EN-DC including FR1 and FR2 . 16
2 References . 16
2.1 Normative references . 16
2.2 Informative references . 18
3 Definition of terms, symbols and abbreviations . 20
3.1 Terms . 20
3.2 Symbols . 22
3.3 Abbreviations . 23
4 Technical requirements specifications . 26
4.1 Technical requirements specification for Frequency Range 1 . 26
4.1.1 Environmental profile . 26
4.1.2 Conformance requirements . 26
4.1.2.0 General . 26
4.1.2.1 Introduction . 26
4.1.2.2 Transmitter Maximum Output Power . 27
4.1.2.2.1 Transmitter Maximum Output Power for Single Carrier . 27
4.1.2.2.2 Void . 29
4.1.2.2.3 Void . 29
4.1.2.2.4 Void . 29
4.1.2.2.5 Transmitter Maximum Output Power for UL-MIMO . 29
4.1.2.3 Transmitter Minimum Output Power . 29
4.1.2.3.1 Transmitter Minimum Output Power for Single Carrier . 29
4.1.2.3.2 Void . 30
4.1.2.3.3 Void . 30
4.1.2.3.4 Void . 30
4.1.2.3.5 Transmitter Minimum Output Power for UL-MIMO . 30
4.1.2.4 Transmitter Spectrum Emission Mask . 30
4.1.2.4.1 Transmitter Spectrum Emission Mask for Single Carrier . 30
4.1.2.4.2 Void . 34
4.1.2.4.3 Void . 34
4.1.2.4.4 Void . 34
4.1.2.4.5 Transmitter Spectrum Emission Mask for UL-MIMO . 34
4.1.2.5 Transmitter Adjacent Channel Leakage Power Ratio . 35
4.1.2.5.1 Transmitter Adjacent Channel Leakage Power Ratio for Single Carrier . 35
4.1.2.5.2 Void . 36
4.1.2.5.3 Void . 36
4.1.2.5.4 Void . 36
4.1.2.5.5 Transmitter Adjacent Channel Leakage Power Ratio for UL-MIMO . 36
4.1.2.6 Transmitter Spurious Emissions . 37
4.1.2.6.1 Transmitter Spurious Emissions for Single Carrier . 37
4.1.2.6.2 Void . 44
4.1.2.6.3 Void . 44
ETSI
4 Draft ETSI EN 301 908-25 V15.0.0 (2024-07)
4.1.2.6.4 Void . 44
4.1.2.6.5 Transmitter Spurious Emissions for UL-MIMO . 44
4.1.2.7 Receiver Reference Sensitivity Level . 45
4.1.2.7.1 Receiver Reference Sensitivity Level for single carrier . 45
4.1.2.7.2 Void . 49
4.1.2.7.3 Void . 49
4.1.2.7.4 Void . 49
4.1.2.7.5 Receiver Reference Sensitivity Level for UL-MIMO . 49
4.1.2.8 Receiver Adjacent Channel Selectivity (ACS) . 49
4.1.2.8.1 Receiver Adjacent Channel Selectivity (ACS) for single carrier . 49
4.1.2.8.2 Void . 53
4.1.2.8.3 Void . 53
4.1.2.8.4 Void . 53
4.1.2.8.5 Receiver Adjacent Channel Selectivity (ACS) for UL-MIMO . 53
4.1.2.9 Receiver Blocking Characteristics . 54
4.1.2.9.1 Receiver Blocking characteristics for single carrier . 54
4.1.2.9.2 Void . 59
4.1.2.9.3 Void . 59
4.1.2.9.4 Void . 59
4.1.2.9.5 Receiver Blocking characteristics for UL-MIMO .
...

SLOVENSKI STANDARD
01-januar-2025
Celična omrežja IMT - Harmonizirani standard za dostop do radijskega spektra -
25. del: Nova radijska (NR) uporabniška oprema (UE), izdaja 15
IMT cellular networks - Harmonised Standard for access to radio spectrum - Part 25:
New Radio (NR) User Equipment (UE) Release 15
Ta slovenski standard je istoveten z: ETSI EN 301 908-25 V15.1.1 (2024-10)
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.99 Druge mobilne storitve Other mobile services
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 25: New Radio (NR) User Equipment (UE) Release 15

2 ETSI EN 301 908-25 V15.1.1 (2024-10)

Reference
DEN/MSG-TFES-15-25
Keywords
3GPP, 5G, cellular, IMT, IMT-2000, IMT-
Advanced, mobile, NR, radio, regulation

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 ETSI EN 301 908-25 V15.1.1 (2024-10)
Contents
Intellectual Property Rights . 9
Foreword . 9
Modal verbs terminology . 10
Introduction . 10
1 Scope . 11
1.0 General . 11
1.1 Operating bands in FR1 . 11
1.2 Operating bands in FR2 . 14
1.3 Operating bands for Range 1 and Range 2 interworking operation with other radios . 15
1.3.1 Inter-band EN-DC within FR1. 15
1.3.1a Void . 15
1.3.2 Inter-band EN-DC including FR2 . 15
1.3.3 Inter-band EN-DC including FR1 and FR2 . 16
2 References . 17
2.1 Normative references . 17
2.2 Informative references . 18
3 Definition of terms, symbols and abbreviations . 20
3.1 Terms . 20
3.2 Symbols . 22
3.3 Abbreviations . 23
4 Technical requirements specifications . 26
4.1 Technical requirements specification for Frequency Range 1 . 26
4.1.1 Environmental profile . 26
4.1.2 Conformance requirements . 26
4.1.2.0 General . 26
4.1.2.1 Introduction . 26
4.1.2.2 Transmitter Maximum Output Power . 27
4.1.2.2.1 Transmitter Maximum Output Power for Single Carrier . 27
4.1.2.2.2 Void . 29
4.1.2.2.3 Void . 29
4.1.2.2.4 Void . 29
4.1.2.2.5 Transmitter Maximum Output Power for UL-MIMO . 29
4.1.2.3 Transmitter Minimum Output Power . 29
4.1.2.3.1 Transmitter Minimum Output Power for Single Carrier . 29
4.1.2.3.2 Void . 30
4.1.2.3.3 Void . 30
4.1.2.3.4 Void . 30
4.1.2.3.5 Transmitter Minimum Output Power for UL-MIMO . 30
4.1.2.4 Transmitter Spectrum Emission Mask . 30
4.1.2.4.1 Transmitter Spectrum Emission Mask for Single Carrier . 30
4.1.2.4.2 Void . 34
4.1.2.4.3 Void . 34
4.1.2.4.4 Void . 34
4.1.2.4.5 Transmitter Spectrum Emission Mask for UL-MIMO . 34
4.1.2.5 Transmitter Adjacent Channel Leakage Power Ratio . 35
4.1.2.5.1 Transmitter Adjacent Channel Leakage Power Ratio for Single Carrier . 35
4.1.2.5.2 Void . 36
4.1.2.5.3 Void . 36
4.1.2.5.4 Void . 36
4.1.2.5.5 Transmitter Adjacent Channel Leakage Power Ratio for UL-MIMO . 36
4.1.2.6 Transmitter Spurious Emissions . 37
4.1.2.6.1 Transmitter Spurious Emissions for Single Carrier . 37
4.1.2.6.2 Void . 44
4.1.2.6.3 Void . 44
ETSI
4 ETSI EN 301 908-25 V15.1.1 (2024-10)
4.1.2.6.4 Void . 44
4.1.2.6.5 Transmitter Spurious Emissions for UL-MIMO . 44
4.1.2.7 Receiver Reference Sensitivity Level . 45
4.1.2.7.1 Receiver Reference Sensitivity Level for single carrier . 45
4.1.2.7.2 Void . 49
4.1.2.7.3 Void . 49
4.1.2.7.4 Void . 49
4.1.2.7.5 Receiver Reference Sensitivity Level for UL-MIMO . 49
4.1.2.8 Receiver Adjacent Channel Selectivity (ACS) . 49
4.1.2.8.1 Receiver Adjacent Channel Selectivity (ACS) for single carrier . 49
4.1.2.8.2 Void . 53
4.1.2.8.3 Void . 53
4.1.2.8.4 Void . 53
4.1.2.8.5 Receiver Adjacent Channel Selectivity (ACS) for UL-MIMO . 53
4.1.2.9 Receiver Blocking Characteristics .
...