ETSI EN 300 652 V1.2.1 (1998-07)

Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Functional specification

REN/BRAN-10-01

Širokopasovna radijska dostopovna omrežja (BRAN) - Zelo zmogljivo radijsko lokalno omrežje (HIPERLAN), tip 1 - Specifikacija funkcij

General Information

• Status: Published
• Publication Date: 20-Jul-1998
• Technical Committee: BRAN 10 - RES 10 migrated WIs
• Current Stage: 12 - Completion
• Due Date: 29-Jul-1998
• Completion Date: 21-Jul-1998
• Ref Project: SIST EN 300 652:1999 - Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Functional specification

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Širokopasovna radijska dostopovna omrežja (BRAN) - Zelo zmogljivo radijsko lokalno omrežje (HIPERLAN), tip 1 - Specifikacija funkcijBroadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Functional specification35.110OmreževanjeNetworking33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 300 652 Version 1.2.1SIST EN 300 652:1999en01-november-1999SIST EN 300 652:1999SLOVENSKI
STANDARD
EN 300 652 V1.2.1 (1998-07)European Standard (Telecommunications series)Broadband Radio Access Networks (BRAN);HIgh PErformance Radio Local Area Network (HIPERLAN)Type 1;Functional specificationSIST EN 300 652:1999

ETSIEN 300 652 V1.2.1 (1998-07)2ReferenceREN/BRAN-10-01 (61c00ioo.PDF)KeywordsLAN, HIPERLAN, data, transmissionETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail]://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 300 652:1999

ETSIEN 300 652 V1.2.1 (1998-07)3ContentsIntellectual Property Rights.10Foreword.101Scope.112Normative references.113Definitions, abbreviations and symbols.123.1Definitions.123.1.1Basic reference model definitions.123.1.2Service conventions definitions.123.1.3Local area network definitions.123.1.4Medium access control service definitions.133.1.5HIPERLAN definitions.133.2Abbreviations.133.2.1General.133.2.2HIPERLAN MAC sublayer general.133.2.3HIPERLAN CAC sublayer general.133.2.4Physical layer general.143.2.5HIPERLAN MAC protocol data units.143.2.6HIPERLAN MAC protocol data unit fields.143.2.7HIPERLAN CAC protocol data units.153.2.8HIPERLAN CAC protocol data unit fields.153.3Symbols.154Overview.154.1HIPERLAN addressing.184.1.1MAC Service Access Point (MSAP) addressing.184.1.2HCSAP addressing.184.2HIPERLAN MAC sublayer features.184.2.1HIPERLAN differentiation.184.2.1.1HIPERLAN identification scheme.194.2.2Communication confidentiality.194.2.2.1HIPERLAN encryption-decryption scheme.194.2.3HIPERLAN relaying.204.2.4Power conservation in communication.204.3HIPERLAN CAC sublayer features.214.3.1HIPERLAN radio channel selection.214.3.2Non-Pre-emptive priority Multiple Access (NPMA).215HIPERLAN MAC service definition.225.1MAC Service Access Point address (MSAP-address).235.2HMQoS.235.2.1User priority.235.2.2MSDU lifetime.235.2.3Residual MSDU lifetime.245.3HIPERLAN information.245.4HIPERLAN MAC service primitives.245.4.1Sequence of primitives at one MSAP.245.5MSDU transfer.255.5.1Types of primitives and parameters.255.5.1.1Source address parameter.255.5.1.2Destination address parameter.265.5.1.3MSDU parameter.265.5.1.4User priority parameter.265.5.1.5MSDU lifetime parameter.265.5.1.6Residual MSDU lifetime parameter.265.5.2Sequence of primitives.26SIST EN 300 652:1999

ETSIEN 300 652 V1.2.1 (1998-07)45.6HMQoS failure report.275.6.1Types of primitives and parameters.275.6.1.1Destination address parameter.275.6.1.2User priority parameter.275.6.1.3MSDU lifetime parameter.275.6.2Sequence of primitives.275.7HIPERLAN look-up.285.7.1Types of primitives and parameters.285.7.1.1HIPERLAN information parameter.285.7.2Sequence of primitives.286HIPERLAN MAC protocol specification.286.1Protocol operation elements.296.1.1HIPERLAN name.296.1.2HIPERLAN identifier.296.1.3Key length.296.1.4Key identifier.296.1.5Reserved group-HCSAP-addresses.296.1.6Sequence number.306.1.7HMPDU priority.306.1.8HMPDU.306.1.9P-saver information base.316.1.10P-supporter information base.316.1.11Duplicate detection information base.316.1.12Route information base.316.1.13Relay role.316.1.14Neighbour information base.326.1.15Hello information base.326.1.16Source multipoint relay information base.326.1.17Topology information base.336.1.18Alias information base.336.2HIPERLAN look-up function.336.2.1HIPERLAN information query.336.2.1.1Procedure.336.2.2HIPERLAN information declaration.346.2.2.1Procedure.346.2.3HIPERLAN information collection.346.2.3.1Procedure.346.3Power conservation function.346.3.1Individual-attention pattern declaration.356.3.1.1Procedure.356.3.2Group-attendance pattern declaration.366.3.2.1Procedure.366.3.3Individual-attention pattern recording.366.3.3.1Procedure.366.3.4Group-attendance pattern recording.366.3.4.1Procedure.366.3.5Expired individual-attention pattern entry removal.376.3.5.1Procedure.376.3.6Expired group-attendance pattern entry removal.376.3.6.1Procedure.376.4User data transfer function.376.4.1Sanity check computation.376.4.1.1Procedure.376.4.2User data encryption-decryption.386.4.2.1Procedure.386.4.3HMQoS failure reporting.386.4.3.1Procedure.386.4.4User data acceptance.386.4.4.1Procedure.386.4.5User data delivery.39SIST EN 300 652:1999

ETSIEN 300 652 V1.2.1 (1998-07)56.4.5.1Procedure.406.4.6User data forwarding.406.4.6.1Procedure.406.5Rooting information maintenance function.406.5.1Route determination.406.5.1.1Procedure.406.5.2Route information base establishment.416.5.2.1Procedure.416.5.3Multipoint relay selection.416.5.3.1Procedure.426.5.4Neighbour information declaration.426.5.4.1Procedure.426.5.5Neighbour information recording.426.5.5.1Procedure.426.5.6Source multipoint relay information declaration.446.5.6.1Procedure.446.5.7Source multipoint relay information recording.446.5.7.1Procedure.446.5.8TC-HMPDU forwarding.456.5.8.1Procedure.456.5.9Alias address learning.456.5.9.1Procedure.456.5.10Expired neighbour entry removal.456.5.10.1Procedure.466.5.11Expired source multipoint relay entry removal.466.5.11.1Procedure.466.5.12Expired topology entry removal.466.5.12.1Procedure.466.5.13Expired alias entry removal.466.5.13.1Procedure.466.6HMPDU transfer function.466.6.1Expired HMPDU removal.466.6.1.1Procedure.466.6.2HMPDU selection.466.6.2.1Procedure.476.6.3HMPDU transmission and retransmission.476.6.3.1Procedure.476.6.4HMPDU reception.486.6.4.1Procedure.486.6.5Expired duplicate detection entry removal.496.6.5.1Procedure.496.7Structure and encoding of HMPDUs.496.7.1Transmission and representation of information.496.7.1.1Octet sequence.496.7.1.2Bit sequence.496.7.1.3Mapping between an octet sequence and a bit sequence.506.7.2General HMPDU structure and encoding.506.7.2.1HMPDU length indicator field (LI).506.7.2.2HMPDU type indicator field (TI).506.7.3DT-HMPDU.506.7.3.1Residual HMPDU lifetime field (RL).516.7.3.2HMPDU sequence number field (PSN).516.7.3.3Destination MSAP-address field (DA).516.7.3.4Source MSAP-address field (SA).516.7.3.5Alias destination MSAP-address field (ADA).516.7.3.6Alias source MSAP-address field (ASA).516.7.3.7User priority field (UP).516.7.3.8MSDU lifetime field (ML).526.7.3.9Key identifier field (KID).526.7.3.10Initialization vector field (IV).52SIST EN 300 652:1999

ETSIEN 300 652 V1.2.1 (1998-07)66.7.3.11User data field (UD).526.7.3.12Sanity check field (SC).526.7.4LR-HMPDU and LC-HMPDU.526.7.4.1HIPERLAN identifier field (HID).526.7.4.2HIPERLAN name field (HN).526.7.5IP-HMPDU and GP-HMPDU.536.7.5.1Pattern offset field (PO).536.7.5.2Pattern period field (PP).536.7.5.3Practice interval field (PI).536.7.6TC-HMPDU.536.7.6.1Originator HCSAP-address field (OA).546.7.6.2Multipoint relay set sequence number field (MSN).546.7.6.3Source multipoint relay HCSAP-address field (SMA).546.7.7HO-HMPDU.546.7.7.1Relay type indicator field (RTI).556.7.7.2Neighbour HCSAP-address field (NA).556.7.7.3Neighbour status field (NS).556.8HIPERLAN MAC protocol predefined values.557HIPERLAN CAC service definition.567.1HCSAP-address.577.2HCQoS.577.2.1Channel access priority.577.3HIPERLAN identifier.587.4Transfer status.587.5HIPERLAN CAC service primitives.587.5.1Sequence of primitives at one HCSAP.587.6Transfer control.597.6.1Types of primitives and parameters.607.6.1.1Transfer status parameter.607.6.2Sequence of primitives.607.7HCSDU transfer.607.7.1Types of primitives and parameters.617.7.1.1Source address parameter.617.7.1.2Destination address parameter.617.7.1.3HCSDU parameter.617.7.1.4HIPERLAN identifier parameter.617.7.1.5Channel access priority parameter.617.7.2Sequence of primitives.618HIPERLAN CAC protocol specification.638.1Protocol operation elements.638.1.1HCPDU.638.1.2HBR-part padding.638.2Elimination-Yield Non-pre-emptive Priority Multiple Access (EY-NPMA).648.2.1Prioritization phase.658.2.2Elimination phase.668.2.3Yield phase.668.2.4Transmission phase.668.2.5Conditions for commencing channel access.678.2.5.1Channel access in channel free condition.678.2.5.2Channel access in synchronized channel condition.678.2.5.3Channel access in hidden elimination condition.678.2.6EY-NPMA operating parameter settings.688.3Channel permission function.688.3.1Channel permission declaration.698.3.1.1Procedure.698.3.2Channel permission recording.698.3.2.1Procedure.698.3.3Channel permission invalidation.698.3.3.1Procedure.69SIST EN 300 652:1999

ETSIEN 300 652 V1.2.1 (1998-07)78.4User data transfer function.698.4.1Synchronized transfer invitation.708.4.1.1Procedure.708.4.2Free transfer inviation.708.4.2.1Procedure.708.4.3Free transfer cancellation.708.4.3.1Procedure.708.4.4User data refusal.708.4.4.1Procedure.708.4.5User data acceptance.708.4.5.1Procedure.708.4.6User data delivery.718.4.6.1Procedure.718.5HCPDU transfer function.718.5.1LBR-part checksum computation.718.5.1.1Procedure.718.5.2HBR-part checksum computation.728.5.2.1Procedure.728.5.3Hashed destination address computation.728.5.3.1Procedure.728.5.4LBR-HBR HCPDU transmission.728.5.4.1Procedure.728.5.5HCPDU reception.738.5.5.1Procedure.738.6Structure and encoding of HCPDUs.748.6.1Transmission and representation of information.748.6.1.1Octet sequence.748.6.1.1.1Encoding of an unsigned binary number.748.6.1.1.2Encoding of the 48-bit LAN MAC address.748.6.1.2Bit sequence.748.6.1.2.1Encoding of an unsigned binary number.758.6.1.3Mapping between an octet sequence and a bit sequence.758.6.2General HCPDU structure and encoding.758.6.2.1HBR-part Indicator field (HI).768.6.2.2Hashed Destination HCSAP Address field (HDA).768.6.2.3Hashed destination HCSAP-Address CheckSum field (HDACS).768.6.2.4Block Length Indicator Replica field (BLIR).768.6.2.5Block Length Indicator Replica CheckSum field (BLIRCS).768.6.2.6HCPDU Type Indicator field (TI).768.6.2.7Block Length Indicator field (BLI).778.6.2.8Padding Length Indicator field (PLI).778.6.2.9HIPERLAN IDentifier field (HID).778.6.2.10Destination HCSAP-Address field (DA).778.6.2.11Source HCSAP-Address field (SA).778.6.2.12PADding field (PAD).778.6.2.13CheckSum field (CS).778.6.3AK-HCPDU.778.6.3.1Acknowledgement IDentifier field (AID).778.6.3.2Acknowledgement IDentifier CheckSum field (AIDCS).778.6.4CP-HCPDU.788.6.4.1Channel 3 field (C3).788.6.4.2Channel 4 field (C4).788.6.4.3Reserved field.
...